Fennec 4.0b6pre installs but immediately closes giving this message on X10 mini pro 2.1 "fennec does not support this device and you may experince problems."
'''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds].
Similar Messages
-
so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
Help please...SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?
similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar: Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
Any clues?
This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***! -
Hp officejet 4500 prints but does not appear in devices and printers in Windows 7
My wireless hp officejet 4500g prints fine wirelessly but it does not appear in Control Panel Devices and Printers in Windows 7. Do I have to go through all that uninstall and reinstall. I've used Window 7 Troubleshooting Printer check and all was fine.. Thanks for any help
Hi,
If the printer successfully print, it do exists within Devices and Printers..
Windows 7 may merge several devices into a single icon, right clicking a merged icon will let you then choose the specific device as you may see in the following screenshot as a sample:
Check any existing printer icon and locate the one your printer combined with..
If none of the printers does not list the 4500 printer make sure to right click the Computer icon within the Devices category, I notiice the printer sometimes merged within the computer as well, then you will see any printer options (e.g. Printer Properties, Printing Preferences within the computer menu.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How do I get my phone set back up and can i retrive everything that seems to be lost
Hello Hilda Louise
Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
I have a Canon 20D and wish to download to my ipad when traveling- I have the camera attachment, but when I connect it- I get a message saying it does not support the device. Is there anything I can do?
Kelli-
Another solution would be to find a Compact Flash-to-USB card adapter that is compatible with the USB adapter in the Camera Connection Kit. Some such adapters draw too much current from the iPad.
You can also get a Secure Digital-to-Compact Flash adapter that would allow you to use SD cards in your camera.
Fred -
i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.
It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.
I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.
Solved in this way:
Close Photoshop first, then:
Download the 8.5 manual update link from here: Don't run the installer, but instead just Open the zip file in Windows Explorer.
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
Navigate inside the zip file to find the resources inside that correspond to the 64 or 32 bit Photoshop version that you're running. I assume you have installed the 64 bit version, so the rest of the instructions will concentrate on the 64 bit Camera Raw.8bi only. Here's the path:
setup.zip \ payloads \ AdobeCameraRaw8.0All-x64-050614143245 \ Assets1_1.zip
The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bits, just with a different name.
Copy 1002 to your folder on your computer where your Camera Raw.8bi normally lives, e.g.,
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0. It's important that the extension is changed to something other than .8bi.
Rename 1002 to Camera Raw.8bi
Run Photoshop and verify the Camera Raw version by choosing Help - About Plug-in... - Camera Raw.
Thank you so much! -
The platform does not support this application, but does under other account
Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
Even when I try to run the app as administrator it keeps coming back with this warning.
Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.Quote from: JLio01 on 11-December-14, 14:49:39
1. What's your App version?
2. What's the mobo/vga/specs of your son's pc?
First of all thanks for the replies and future replies.
1.
Version 1.0.0.18
2.
My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
I do know how to add permissions to the security tab have been doing that several years for some job I had once.
I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
And in case of trying a re-install of the App anyone got an url for a new version?
Might have found it but it isn't on any MSI webpage.
I did found something on Guru3D but I'm not aloud to post external links.
Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
So a clean url would be nice so to say.
So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site -
I have a 16GB 3GS phone since about20 months now. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it. I always used standard headphones and charging cable. Now when i recall, it started at one of the sync sessions with my itunes. I have turned my phone off and aon again and again but the message keeps coming every one or two minutes.I have also started loosing voicce on different applications like youtube etc. Also the ringer volume up and down key does not show me the small boxes increasing or decreasing on screen. The phone is playing crazy. Can someone help please
Thanks
ZiaIt helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
Firefox 4 does not support AVG Safesearch but IE9 does!!! Why?
I decided to install Firefox 4 but it does not support AVG safe search or it's very useful link scanner, so for safer browsing I have reverted back to version 3.6.16.
However Internet explorer 9 from MS supports AVG! I accept that AVG ought to release a new version, but why can Microsoft continue support in their completely re-vamped browser and Mozilla cannot, since all my other add-ons were still compatible?
For reference I am running on Win7 home premium Sp1 64bit, AMD Phenom IIX4 N930 CPU @2.0Ghz , 4GB DDR3 Ram and an ATi HD5470 512MB Graphics Card.
In conclusion, it would be fantastic to see Mozilla tweak the settings (if possible) to allow AVG safe search to work with Firefox 4, Until then I will go on using 3.6 and IE9 from Microsoft.Close Firefox 4. Go to C:\Program Files (x86)\AVG\AVG10\Firefox and open install.rdf in Notepad. Change 3.6.* to 4.0.* exit and save. Done.
-
Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?
Do you have the latest camera raw installed for Photoshop? If so, you can find the profiles in /Library/Application\ Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon/ . Lightroom should recognize them if you move them into your home directory's Library folder in the exact same folder structure (but in the Library folder in your home directory). This is assuming you are using Mac OS X. No clue where these files would be on Windows. If you don't have Photoshop, you can install Camera Raw using the combined installer with DNG converter which is a free download from Adobe. This should (I think) give you the profiles in that exact location without owning Photoshop.
Maybe you are looking for
-
this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage
-
I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising. I have put the book on a PDF file as instucte
-
How to find which disk is faulty in a degraded RAID5 array? Then fix?
(I already posted a question in an old RAID thread, but I was told people who know the answers don't read old threads... And I checked the Sticky.) My 4-disk RAID5 array (the K8N "PC1" machine) suddenly degraded today, and one disk is marked as fault
-
SC status is still in Awaiting for Approval Even after PO and confirmation creation.
Hi Experts, We have SRM 7.0 with Classic scenario, Here we have strange case where for One SC already backend PO created and Confirmation is done. Still SC status is showing as Awaiting for approval. Kindly Help me to solve this issue. Thanks in adva
-
HT4539 Where is Edit Preferences in iTune 10.7?
Trying to Enable Automatic Downloads in iTunes 7 as per instructions "Enabling Automatic downloads on your computer" Instruction: For Windows computers: Choose Edit > Preferences and click the Store tab. Cannot find this function in iTunes 10.7