FEP 2010 service keeping stopping

Hi,
All our Windows XP machine having problem with Microsoft Forefront 2010. Its keep stop the service.
I have restarted but after 30 minutes in stops again. this is happen with over 50 pc now.
Its only started to happen today.

Hi,
Sorry for the inconvenience, it is due to an update that was shipped on April 15, 2014. This was corrected via signature update, which automatically resolved the issue, and if you have deployed the most recent signatures do not need to take any action. In addition,
if you have disabled Behavior Monitoring or changed any other features, please revert those changes.
More information:
Antimalware Engine 1.1.10502.0 was released to customers on 17 April 2014
Best regards,
Susie

Similar Messages

  • Microsoft Forefront Threat management Gateway services keeps stopping

    Please assist urgently
    Microsoft Forefront Threat management Gateway 2010 services keeps stopping. We are on the 
    Service Pack 2 Roll update 5
     On the event viewer does not display reason why the services stopped.
    Your assistance will be highly appreciated
    Regards
    Daniel Nkuna

    Hi,
    Here is a similar thread that TMG keeps stopping and no error displayed in event log. It is fixed by uninstalling Surf cop on the TMG servers. Do you have such application installed on TMG server?
    TMG Firewall service stopping
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Exchange 2010 SP3 services keep stopping

    Hi Folks,
    Been struggling to find any answer to this problem.  Hoping someone here can give me some guidance.
    Have a Windows SBS 2011 Server which was migrated from SBS 2003.  Have a secondary DC purely as a backup DC.
    Ever so often three Exchange Services keep stopping:
    EdgeSync
    Forms-Based Authentication service
    RPC Client Access
    Which of course stops clients accessing emails.  If I simply start the three services all is good.  Sometimes it will be a few days before they will stop again.  At the time they stop I get the following Event ID's
    MSExchangeRPC Event ID: 1002
    Failed to register service principal name ExchangeMDB.  Failed with error code No authority could be contacted for authentication (0x80090311).
    MSExchange EdgeSync Event ID: 1045
    Initialization failed with exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Microsoft Exchange Active Directory Topology service on server localhost did not return any suitable domain controllers.
       at Microsoft.Exchange.Data.Directory.DSAccessTopologyProvider.GetConfigDCInfo(Boolean throwOnFailure)
       at Microsoft.Exchange.Data.Directory.TopologyProvider.PopulateConfigNamingContexts()
       at Microsoft.Exchange.Data.Directory.ADSession.GetConfigurationNamingContext()
       at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetLocalSite()
       at Microsoft.Exchange.EdgeSync.EdgeSyncConfig.<Initialize>b__0()
       at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
       at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount). If this warning frequently occurs, contact Microsoft Product Support. 
    I'm wondering if something went wrong with the migration as we didn't do it.  It is a fairly new server 6 months old.
    Any suggestions would be appreciated.
    Thanks Brandan

    Thanks Guys,
    I can confirm that IPv6 is on.  I ran the BPA and it did throw up a few issues, one with old server in DNS forward lookup zone.  I have fixed these and waiting to see if they make a difference.  The problem has always happened since the migration.
     I have also switched the FormsBased and RPC to delayed start because I noticed these sometimes don't start after a reboot.
    Keeping an eye on it and will report any updates.
    Thanks Brandan

  • Mail Service Keeps Stopping For No Reason

    Hi There everyone. Over the past few days my Mail Service keeps stopping. Not giving any particular error, the only clue is this log message:-
    Jan 6 13:12:39 server master[371]: exiting on SIGTERM/SIGINT
    Is that helpful? I can start the service again and it seems OK... for a few hours then it stops again.
    I have tried, reconstructing and repairing until I am blue in the face. Any other suggestions please? Thanks in advance.

    I have just had the same thing happend again today with this in the log file:-
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53 server imap[1413]: accepted connection
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53: --- last message repeated 2 times ---
    Jan 12 08:52:53 server imap[1413]: SQUAT failed to open index file
    Jan 12 08:52:53 server imap[1413]: SQUAT failed
    Jan 12 08:53:07 server master[367]: process 1399 exited, status 0
    Jan 12 08:54:21 server master[367]: process 1413 exited, status 0
    Jan 12 09:02:07 server master[51]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:07 server master[51]: process started
    Jan 12 09:02:08 server master[177]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:02:12 server ctl_cyrusdb[177]: verifying cyrus databases
    Jan 12 09:02:14 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 2 seconds
    Jan 12 09:02:16 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 2 seconds
    Jan 12 09:02:28 server master[261]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:29 server master[261]: process started
    Jan 12 09:02:29 server master[262]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:03:42 server master[335]: process started
    Jan 12 09:03:42 server master[337]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:00 server ctl_cyrusdb[337]: DBERROR db4: unable to join the environment
    Jan 12 09:04:15 server ctl_cyrusdb[337]: verifying cyrus databases
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 1 second
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:04:41 server master[352]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:04:41 server master[352]: process started
    Jan 12 09:04:41 server master[354]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:51 server ctl_cyrusdb[354]: verifying cyrus databases
    Jan 12 09:04:51 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:04:52 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:05:17 server master[387]: process started
    Jan 12 09:05:27 server master[447]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:27 server master[447]: process started
    Jan 12 09:05:27 server master[448]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:41 server master[451]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:41 server master[451]: process started
    Jan 12 09:05:41 server master[452]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:59 server ctl_cyrusdb[452]: DBERROR db4: unable to join the environment
    Jan 12 09:06:01 server ctl_cyrusdb[452]: verifying cyrus databases
    Jan 12 09:06:01 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:06:02 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:06:21 server master[479]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:21 server master[479]: process started
    Jan 12 09:06:21 server master[480]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:06:31 server master[481]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:42 server master[483]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:43 server master[483]: process started
    Jan 12 09:07:01 server ctl_cyrusdb[485]: DBERROR db4: unable to join the environment
    Jan 12 09:07:02 server ctl_cyrusdb[485]: verifying cyrus databases
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:07:28 server ctl_cyrusdb[485]: done verifying cyrus databases
    Jan 12 09:07:28 server master[497]: about to exec /usr/bin/cyrus/bin/idled
    Jan 12 09:07:29 server master[483]: Cyrus POP/IMAP Server v2.3.8 ready for work
    Jan 12 09:07:29 server master[499]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:07:29 server ctl_cyrusdb[499]: checkpointing cyrus databases
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/annotations.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/mailboxes.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29: --- last message repeated 1 time ---
    Jan 12 09:07:29 server ctl_cyrusdb[499]: done checkpointing cyrus databases
    Jan 12 09:07:29 server master[483]: process 499 exited, status 0
    Jan 12 09:08:16 server master[512]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[512]: executed
    Jan 12 09:08:16 server imap[512]: accepted connection
    Jan 12 09:08:16 server master[513]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[513]: executed
    Jan 12 09:08:16 server imap[513]: accepted connection
    Jan 12 09:08:17 server imap[512]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[512]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server master[514]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[513]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[513]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server master[515]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[515]: executed
    Jan 12 09:08:17 server imap[515]: accepted connection
    Jan 12 09:08:17 server master[516]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[516]: executed
    Jan 12 09:08:17 server imap[516]: accepted connection
    Jan 12 09:08:17 server imap[516]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[516]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server imap[515]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[515]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server imap[516]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:17 server imap[516]: open: user paul opened Junk
    Jan 12 09:08:17 server imap[515]: skiplist: recovered /var/imap/user/f/florensis.seen (7 records, 14904 bytes) in 0 seconds
    Jan 12 09:08:17 server imap[515]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:17 server imap[516]: SQUAT failed to open index file
    Jan 12 09:08:17 server imap[515]: open: user florensis opened INBOX
    Jan 12 09:08:17 server imap[516]: SQUAT failed
    Jan 12 09:08:18 server master[517]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[517]: executed
    Jan 12 09:08:18 server imap[517]: accepted connection
    Jan 12 09:08:18 server imap[517]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:18 server imap[517]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:18 server master[518]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[518]: executed
    Jan 12 09:08:18 server imap[519]: executed
    Jan 12 09:08:18 server imap[518]: SQUAT failed to open index file
    Jan 12 09:08:18 server imap[518]: SQUAT failed
    Jan 12 09:08:18 server master[520]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[520]: executed
    Jan 12 09:08:18 server imap[520]: accepted connection
    Jan 12 09:08:19 server imap[516]: Expunged 7 messages from user.paul.Junk
    Jan 12 09:08:19 server imap[520]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:19 server imap[520]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:19 server imap[517]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[517]: open: user florensis opened Junk
    Jan 12 09:08:19 server imap[517]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[517]: SQUAT failed
    Jan 12 09:08:19 server imap[519]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[519]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:19 server imap[520]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[520]: open: user florensis opened Deleted Messages
    Jan 12 09:08:19 server imap[520]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[520]: SQUAT failed
    Jan 12 09:08:20 server imap[513]: accepted connection
    Jan 12 09:08:20 server imap[513]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:20 server imap[513]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:20 server imap[514]: Expunged 1 messages from user.paul
    Jan 12 09:08:20 server imap[513]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:22 server imap[513]: open: user paul opened Apple Mail To Do
    Jan 12 09:08:22 server imap[516]: open: user paul opened Sent Messages
    Jan 12 09:08:22 server imap[515]: Expunged 1 messages from user.florensis
    Jan 12 09:08:23 server imap[517]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:23 server imap[518]: open: user paul opened Junk
    Jan 12 09:08:24 server imap[518]: Expunged 1 messages from user.paul.Junk
    Does this help? It then cleared itself??

  • Microsoft Exchange Replication Service keep stopping

    Not sure what is going on here. The replication service keep stopping on one of my servers within the DAG. I cant think of anything different about this server compared to others (anything known at least). This server sits at our DR facility and is the host
    of the 3rd copy to a few of our databases, which primary and secondary ones live at our HQ. The application log reports this every 5-10 seconds
    Watson report about to be sent for process id: 31860, with parameters: E12IIS, c-RTL-AMD64, 15.00.0995.029, msexchangerepl, M.Exchange.Common, M.E.C.H.DatabaseFailureItem.Parse, System.ArgumentOutOfRangeException, fe19, 15.00.0995.012.
    ErrorReportingEnabled: False 
    The system log reports this every 5-10 seconds also:
    The Microsoft Exchange Replication service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.
    I have ran windows update, and it seems that every time I reboot the machine, the shutdown tracker comes up. I think it has something to do with hardware, but no idea where to look next. 

    Hi,
    This issue occurred because Microsoft Exchange Replication Services Was Unable to Write In "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    The fix for the issue will be available in next cumulative update. Meanwhile, please follow the steps below for a workaround to resolve the issue. This workaround is to clear the entries log storing mailbox database failure items.
    On problem server, open command prompt in administrator privileges.
    Run following command to clear the even entries from the log
    Wevtutil.exe cl "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    Best Regards.

  • Async service keep stopping with Specified cast is not valid

    Hi there,
    Our organization currently is experiencing some failure on CRM 4.0 Async service.
    The error message is :
    failed while monitoring asynchronous operations queue. Exception: System.InvalidCastException: Specified cast is not valid.
       at Microsoft.Crm.Asynchronous.ServerOrganizationConfiguration.GetSdkBaseUrl()
       at Microsoft.Crm.Asynchronous.ServerOrganizationConfiguration.get_WebServiceEndpoint()
       at Microsoft.Crm.Asynchronous.CrmServiceFactory.CreateCrmService(Guid organizationId, Nullable`1 userId, CorrelationToken correlationToken)
       at Microsoft.Crm.Asynchronous.SdkPluginDescriptionProvider.GetPluginTypeDescription(Guid pluginTypeId, IOrganizationContext context)
       at Microsoft.Crm.Caching.PluginTypeCacheLoader.LoadCacheData(Guid key, IOrganizationContext context)
       at Microsoft.Crm.Caching.CrmMultiOrgCache`2.CreateEntry(TKey key, IOrganizationContext context)
       at Microsoft.Crm.Caching.CrmSharedMultiOrgCache`2.LookupEntry(TKey key, IOrganizationContext context)
       at Microsoft.Crm.Caching.PluginTypeCache.LookupEntry(Guid pluginTypeId, IOrganizationContext context)
       at Microsoft.Crm.Asynchronous.AsyncOperationCommand.GetPluginType(Guid pluginTypeId)
       at Microsoft.Crm.Asynchronous.EventOperation.InternalExecute(AsyncEvent asyncEvent)
       at Microsoft.Crm.Asynchronous.AsyncOperationCommand.Execute(AsyncEvent asyncEvent)
       at Microsoft.Crm.Asynchronous.QueueManager.PoolHandler.ProcessAsyncEvent(AsyncEvent asyncEvent)
       at Microsoft.Crm.Asynchronous.QueueManager.PoolHandler.InvokeHandlerInPool(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    It looks the GetSdkBaseUrl() function failed. Has anyone experienced it before?
    Cheers

    I don't know about your specific error, but the CRM 4.0 Async service was notoriously unstable.  That's why they added a monitoring service in later versions to keep it up.  However, for 4.0, I recommend going to the Service itself in the Windows
    Service area, and then tell the "behavior after failure" section to "Restart" every time it fails.  While not perfect, it will keep your Async service up and running even when it crashes.
    The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

  • Cisco Prime Infrastructure 1.3 NMS service keeps stopping

    Has anyone else run into this issues? It was an upgrade from NCS 1.1, but the patch for 1.1 was installed before the upgrade.

    Hi Shannon:
    There are a number of reasons the NMS service could be stopping.  Your best bet would be to get a TAC Service Request open to narrow it down. 

  • SMB service crashes / stops

    I have an Xserve 10.5.8 with the SMB service enabled for a few windows clients in the network.
    The SMB service keeps stopping unexpectedly, sometimes 2 times on a day, sometimes it runs for more than a week.
    I have tried to find a cause, but haven't succeeded yet.
    All good advise would be appreciated

    Hi
    we had same problem wih 10.5.8, and now we have updated our server at 10.6.3.
    Issue is resolved now.

  • I keep getting a popup that says"host process for window services has stopped"

    hp s5220f
    microsoft windows 7 home premium edeition (64 bit)
    I keep getting a popup window that says "host process for window services has stopped"
    How can I get rid of this?

    Hello tribefanz,
    Sounds like a compatiblity issue with a program and Windows 7. We need to find out what program is causing the issue though. We can do that through event viewer
    1. Click the start orb
    2. Select Control Panel
    3. System and Security
    4. Under Administrative Tools select the Event Viewer
    In the event viewer you will want to drill down into the Application and System logs and look for anything with a Red X that says Error. Identify the program causing the problem and then we can go from there.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • FEP 2010 - Email alerts not sended (Test-Emails are Successful)

    Hello,
    I got a FEP 2010 environment that is integrated with SCCM 2007.
    The "Test email alert" is sent successfull. But there is no email-alert sent when a FEP-client gets MallWare. (The MallWare is only removed and this is shown in the event viewer of the client
    & the reports on the FEP Server).
    Worth to meantion is that the Alerts stopped to work after a reinstall of IIS and Reporting Services.
    In the Event Viewer of the server running FEP, the "Forefront Endpoint Protection" log keep saying:
    Error, FepSrv, 3004
    Alerts manager failed
    Error recieved:
    MalwareDetectionAlertResultComputerName
    And one/two minutes later it says:
    Information, FepSrv, 3005
    Alerts manager succeeded after failure
    I have tried the "FEP Best Practices Analyzer (BPA)" and I got the result "0 items NonCompliant" and it showed that Alerts where configured correctly.
    I don't know what more to troubleshoot, do you have any ideas?
    Best Regards,
    Anders

    Hi Jörgen,
    Thank you for the answer, but the SQL Agent is up and running and there's no errors.. 
    The workflow seems to work properly, except the "FEPSrv" who can't find events that would trigger alerts.
    (If I run a report on the FEP-server, the report contain info about the clients who's been exposed to MalWare - And MalWare info)
    The "Update Rollup 1 for forefront endpoint protection 2010" ( http://www.microsoft.com/en-us/download/details.aspx?id=26583 )  has not been implemented, can this be
    a possible reason to why the alerts not function properly?
    Regards,
    Anders

  • When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

    well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
    ipod touch 2nd gen
    http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

    Try this:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

    I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall).  Though the initial replication seems to be
    happening it is very slow (the folder in question is less than 3GB).  I'm seeing these in the event viewer every few minutes:
    The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
    Additional Information:
    Error: 1726 (The remote procedure call failed.)
    and then....
    The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
    Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
    -Increased TCP Timeout to 24 hours 
    -Added the following values on both sending and receiving members and rebooted server
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Value =DisableTaskOffload
    Type = DWORD
    Data = 1
    Value =EnableTCPChimney
    Type = DWORD
    Data = 0
    Value =EnableTCPA
    Type = DWORD
    Data = 0
    Value =EnableRSS
    Type = DWORD
    Data = 0
    ---------------------------------more troubleshooting--------------------------
    -Disabled AntiVirus on both members
    -Made sure DFSR TCP ports 135 & 5722 are open
    -Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
    -Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
    Sending Member:
    [DFSRs.exe]
      TCP    10.x.x.x:53            0.0.0.0:0             
    LISTENING       1692
    [DFSRs.exe]
      TCP    10.x.x.x:54669        
    10.x.x.x:5722          TIME_WAIT       0
      TCP    10.x.x.x:54673        
    10.x.x.x:5722          ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64773        
    10.x.x.x:389           ESTABLISHED     1692
    [DFSRs.exe]
      TCP    10.x.x.x:64787        
    10.x.x.x:389           ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64795        
    10.x.x.x:389           ESTABLISHED     2104
    Receiving Member:
    [DFSRs.exe]
      TCP    10.x.x.x:56683        
    10.x.x.x:389           ESTABLISHED     7472
     [DFSRs.exe]
      TCP    10.x.x.x:57625        
    10.x.x.x:54886         ESTABLISHED     2808
    [DFSRs.exe]
      TCP    10.x.x.x:61759        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61760        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61763        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61764        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61770        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61771        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61774        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61775        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61776        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61777        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61778        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61779        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61784        
    10.x.x.x:52757         ESTABLISHED     7472
    [DFSRs.exe]
      TCP    10.x.x.x:63661        
    10.x.x.x:63781         ESTABLISHED     4880
    ------------------------------more troubleshooting--------------------------
    -Increased Staging to 32GB
    -Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
    a. The computer object of the DFS server
    b. The DFSR-LocalSettings object under the DFS server computer object
    -Ran
    ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
    -AD replication is successful on all partners
    -Nslookup is working so DNS is working
    -Updated NIC drivers on both servers
    - I ran the following to set the Primary Member:
    dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
    Then Dfsrdiag Pollad /Member:<member name>
    I'm seeing these errors in the dfsr logs:
    20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
    Error:
    + [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
    ---------------------------------------more troubleshooting-----------------------------
    I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried.  Does anyone have any other suggestions?  Maybe I need to look somewhere
    else on the server side or firewall side? 
    I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue. 
    Some other things I'm wondering:
    -Could it be the speed of the NICs?  Server A is a 2012 Server that has Hyper-V installed.  NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
    (Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
    -Could occasional ping timeout's cause the issue?  From time to time I get a timeout but it's not as often as the events I'm seeing.  I'm getting 53ms pings.  The folder
    is only 3 GB so it shouldn't take that long to replicate but it's been days.  The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am.  Throughout the rest of the time I have it set anywhere from
    4Mbps to 64 Kbps.  Server A is on a 5mb circuit and Server B is on a 10mb circuit. 

    I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
    185 events from 12:28:21 to 12:49:25
    Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
    Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
    Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
    Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
    Side note, 1726 is referenced here:
    https://support.microsoft.com/kb/976442?wa=wsignin1.0
    But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
    It also says...
    For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
    layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
    Command Prompt window:
    NETSTAT –ANOBP TCP
    This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
    Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
    NETSTAT -ANOBP TCP >> X:\info.txt
    Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
    =IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
    Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
    Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
    My server had 125 connections open.
    That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
    I'll see if I can find anything useful out, but a better solution would be most wonderful.

  • Logger Service keeps shutting down and restarting

    Hello,
    I have upgraded my lab UCCE call center to v9.0
    I have a simplexed environment
    Ever since, the logger service keeps shutting down and restarting.
    Recently, the node manager issued an error message and shut down the server
    I tried to check some logs but I point out the problem, there are errors in different processes.
    Attached are the logs.

    Hi,
    if the NM tries to reload the server, it indicates a Problem (capital inteded).
    Indeed, there's something interesting going on:
    08:29:11:822 la-rpl Trace: Starting Recovery Key for Admin table is 6717118506000.0 
    08:29:11:822 la-rpl Trace: The largestkey = 7201232308043.0 >= startkey = 6717118506000.0  
    08:29:11:823 la-rpl Trace: To correct this problem: Stop logger service. Use ICMDBA tool to sync configuration data from its partner logger database. Restart logger service. 
    08:29:11:823 la-rpl Fail: Assertion failed: largestkey < startkey.  File: ICRDB.CPP.  Line 742
    08:29:11:860 la-rpl Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\replication.exe_20130523082911824.mdmp 
    08:29:12:074 la-rpl Unhandled Exception: Exception code: 80000003 BREAKPOINTFault address:  754A3219 01:00012219 C:\Windows\syswow64\KERNELBASE.dllRegisters:EAX:00000000EBX:00000000ECX:00001890EDX:E1043F00ESI:015F8AB0EDI:00000005CS:EIP:0023:754A3219SS:ESP:002B:003CE2D8  EBP:003CE2E0DS:002B  ES:002B  FS:0053  GS:002BFlags:00000246Call stack:Address   Frame754A3219  003CE2E0  DebugBreak+26EB1459C  003CE2EC  EMSAbortProcess+C6EB1ACD1  003CF7F8  EMSReportCommon+1A16EB1ADBB  003CF818  EMSFailMessage+2B013BBE5A  003CF8A8  ICRDb::ICRDb+44A013B2FE2  003CF9B8  main+582015D96C2  003CF9FC  NtCurrentTeb+174767333AA  003CFA08  BaseThreadInitThunk+1277449EF2  003CFA48  RtlInitializeExceptionChain+6377449EC5  003CFA60  RtlInitializeExceptionChain+36
    The short version: configuration data is corrupt.
    The longer version: the above message in red informs about the result of a sanity check. Each configuration change creates a new row in one of the tables holding the config info, and each row contains a RecoveryKey which is usually a large number incremented by the insertion. The error message says the largest key (= last key) contains a value that is lower than the first key. Naturally, this is something to consider for a lonely philosopher, but the rigid world of Cisco ICM does not allow metaphysical phenomena. Lower numbers are supposed to be lower than higher numbers.
    This, of course, raises an exception and the Logger service restarts. If there are too many restarts, the Node Manager kicks in and restarts the machine - this is just a mechanism that prevents a larger extent of data corruption.
    Now, if there's an other side Logger - fine, as the error message suggests, you can initiate manual replication (provided the other Logger database contains valid information).
    Unfortunately, as you have written, this is a side A only environment. This may mean:
    - accepting the situation, stopping ICM, throwing out the logger database, recreating it and reinstalling the Logger service,
    - poking around in various tables to check what may be saved - this may mean the beginning of an adventure.
    G.

  • FEP 2010 Implementation Notes/Concerns

    My perspective is from a large enterprise with SCCM 2007R3, no SCOM, currently running Symantec.
    I realize this is the first release with SCCM integration but I feel a few notes should be posted to either point me in the right direction for information or to better the product if my findings are correct.
    Current FEP 2010 findings:
    SCCM Integration:
    Only partial integration with SCCM (policies, collections, reports) Doesn't use the existing CM distribution points for definition distribution
    Scaling:
    Appears to be built for small to medium SCCM sites as the only automated definition delivery systems out of the box don't scale well.
    Automation relies on WSUS or Windows Update
    If you use UNC/DFS for definition updates you have to build the download and replication system - in this configuration there is no log of the definition transaction and its source on the clients. 
    WSUS and Windows Update implementations appear to be the only way to utilize delta definitions so UNC methods require full downloads.
    Alerting and Reporting:
    Email alerts don't give path and file nor accurate/full remediation detail, the only way to get detail is event log or SCOM
    No configuration for what information email alerts contain
    Alerts only once per 24 hour period per node without the ability to configure
    Alerts state action required even when the threat has been quarantined or deleted from the system and no additional malware or remediation is needed (specific test was with 22 malware components on the desktop,
    alureon file was one that showed this failure even though it never infected the system)
    Relies on SCOM for the optimal alerting and reporting
    Some built in reports don't appear to populate properly
    Policies:
    Although there are decent policy templates and CM integration, the policies aren't cumulative, they don't support layered/multiple policies
    XP Support:
    NIS (Network Inspection Service) requires WFP  = no Windows XP support
    Client Interface:
    In the client interface there is no way to view overrides or definition update configuration
    If UNC definition updates are used, the client interface doesn't update its last checked time

    This is old post and there have been several changes in FEP, now the successor of FEP is System Center Endpoint Protection (SCEP) and several things been improved. Try reproduce your issue in SCEP and if problem persist, please post it as a new question.
    I believe most of your issues been addressed in SCEP. However things like support for Windows XP is no longer available because support for Windows XP already ended.

  • Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

    Hello,
    Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
    Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
    http://www.microsoft.com/en-us/download/details.aspx?id=41394

    (1)  I had to roll it back:
    The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors.  It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem.  Rolling
    back the update and rebooting the server seemed to resolve the issue.
    Issues reported before the general mailflow stopping for everyone:
    Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
    A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
    (2)   
    ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
    OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
    When he tries to open an e-mail, he gets an error message.
    If he tries to mark an e-mail unread, he gets a different message.
    Thanks Ben

Maybe you are looking for

  • How to get a list of all the clients logged in to the network

    hiii how can i fetch a list of all the users who are currently logged on the network...so that the list can then be sent to a database..plz tel me what techniqe can followed to do this....thanx

  • Windows 7 Word 2010 with EPS A4 Acrobat X Pro Paper Size Issue

    I'm running into the following issue trying to create a PDF. Word 2010 A4 page size. Document has some Illustrator EPS images used in it. When I go to make the PDF using Acrobat from the top menu and then Create PDF, the page size of the PDF is A4, b

  • Hello. I can not reset my questions to unlock Apple id

    Hello. I can not reset my questions to unlock Apple ID

  • Dark Screen HP DV6

    Hi, i have Hp dv6 model wb320ea#abd. my computer start normal and everythinkg is ok . just i see HP logo in startup dark and windows Logo and every thing is dark .  i took bottery out and hold 30 second Power buttom and again connected Ac and start .

  • Users and Salesman Webtools

    Hello Experts, I have a simple question for Webtools with users and salesman I have 10 Salesmen. which exist in SAP as Salesmen and are linked to their BP. They do not have a SAP user and do not need one since they will never be using SAP rather they