FEP 2010 with Reporting Services in Clsster

1) It¡s not supported reporting services clustering (2 nodes), but i can install reporting in both nodes sharing report database. This ReportDatabase is installed in a instance (Instance1) onto the same cluster
2) I've create teow SCCM Reportin services point (SRS1 y SRS2)
3) When I launch FEP installation (basic), i can select
http://SRS1/reportServer or http://SRS2/reportServer.
4) But...is supported input URL manual to http://Instance1/ReportServer
Thanks

This is old post and there have been several changes in FEP, now the successor of FEP is System Center Endpoint Protection (SCEP) and several things been improved. Try reproduce your issue in SCEP and if problem persist, please post it as a new question.

Similar Messages

Problem with Reporting Services and CRM2011 Online

Hi, this is my issue:
I have two organizations in CRM 2011 Online and I want to create a report with Reporting Services when I create my datasource my connection string is something like this https://organization1.crm.dynamics.com but when I create a dataset with a FetchXML it
retrieve the data from organization2

Hi Diegohdztam,
According to your description, the dataset retrieve data from organization2, other than the organization1 which is already used to create a Data Source. If in this scenario, I think this issue can be caused by the organization2 also create a Data Source in
the report, then you are using it as the Data Source for the Dataset. So please double check the data sources in the report.
Besides, we can try to create a new Data Source with the New button for current Dataset to test the issue again.
The following screenshot is for your reference:|
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Upgrade Sharepoint 2010 SQL Reporting Services from 2008 R2 to 2014

I'm about to do the upgrade of SharePoint 2010 Reporting Services from 2008 R2 to 2014. The instructions say it can be done "in-place" with no downtime. I've seen this article:
http://whitepages.unlimitedviz.com/2012/03/upgrading-sql-server-reporting-services-to-2012-in-sharepoint-integrated-mode/
It covers 2012 so I assume the same holds true for 2014.
I'd like to get the low down from anyone who has actually performed the upgrade of SSRS from 2008 R2 to 2014. Anyone done this upgrade? Any issues?
David Jenkins

So far I would have to say that the upgrade can be done "in-place" but there is a "DOWNTIME".
This article has helped a lot:
http://blogs.catapultsystems.com/tlingenfelder/archive/2012/07/10/upgrading-sql-server-reporting-services-2008-r2-to-sql-server-reporting-services-2012-in-sharepoint.aspx
In the article it tells you about a bug in the SQL Upgrade process where
the Domain account you use will not work. When you type in the password it fails. On top of that it will lock the Domain account because of a bad password! There is probably something wrong with the authentication process and it garbles the password.
Anyway, you end up having to change the account to the "Network Service" account before you can do the upgrade. This means the services get restarted which means???
DOWN TIME! He goes over other errors. I haven't reviewed these issues yet.
The other thing I learned is that everything needs to be SQL Server 2008 R2 SP2 in order to upgrade. You don't find this out until almost the last step in the installation process.
Now I have to wait until next week to actually do the upgrade because I have to schedule an SP2 install. :(
David Jenkins

SharePoint 2010 and Reporting Services add-in - multiple versions supported?

Hello,
I would like to try out Reporting Services with SharePoint 2010. I already have the Reporting Services add-in installed on the WFE for SQL Server 2008 R2, but not configured.
At this point I thinking it's best to move forward with SQL Server 2012.
Can both the 2008 R2 version and 2012 version of the Reporting Services add-in exist on the same WFE in separate instances? Or do I need to uninstall the 2008 R2 version first?
Thank you in advance,

Just upgrade to the 2012 version, you don't have to uninstall first.
Also, see the supported combinations of SSRS version and Addin version:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Use the highest version of the addin possible, as newer addins have offered performance improvements.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint/Project Enterprise 2010 Integrated Reporting Services SQL 2008 R2

We have integrated Reporting Services in to SharePoint 2010 configured in Trusted.
Problem:
on a BI site we have a report that runs just fine when you click on it. however when you click the dropdown arrow and edit in reportbuilder. It will open report builder 3.0, but not the report you wanted to edit. when you go to Open the report
from the site we get the error
Unable to connect to the server that is specified in the URL. "myspsite url" Make sure that the server is running, the URL is correct, and you have permission to use the server.

Hi
Damon ,
Thank you for your posting!
For your issue, please format the URL used to connect Report Server as “http://server/reportserver/”
(with '/' in the end).
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2a5e9945-e3ac-41e7-a50d-772b3cc68f93/report-builder-30-unable-to-connect-to-server?forum=sqlreportingservices
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Use a SQL 2012 database server with Reporting Services 2008?

Hello, we have a SQL Server 2008 R2 Reporting Services Standard server with the reporting databases running on a SQL Server 2008 Standard database server. I would like to upgrade the database server to SQL Server 2012 before I upgrade the reporting server.
Can I run SQL Server 2008 R2 Reporting Services against a 2008-version database running on a SQL 2012 database server? Thanks for your help.

Hi Nicole
Thanks for your posting.
Are you asking if we can connect from SSRS 2008 r2 to a database sitting on SQL Server 2012. Am I right?, please ignore me if I misunderstood your question. If that is your question
then I think you will be able to using BIDS 2008, I have created A database on SQL Server 2012 and I use that database table inside my SSRS 2008 R2 dataset. I can even think that you can use a database of compatibility level of 2012(110) as well
Many thanks
Syed Qazafi Anjum

Please help me with Reporting Services Button

HI there,
I am having major trouble trying to get the reporting services button to work.
I have all the relevant SSRS and SQL Reporting Services installed on my local machine and quite happily connect to the SSRS reportServer via the URL: http:pw011157:8080/ReportServer yet when I try to enter this to the Report Server Button Connection in Xcelsius - the clock just goes round and round and round... never gives me a list of reports from the report server...
what do I have to do to get the Reporting Services Button to work correctly so I can pull in reports from SSRS
thanks
Dean

hi Anil,
I've jsut spent 1 hour searching for an add-on Reporting Services or any type of file on my computer that could relate to installing the xrs gateway - Frustrated is NOt quite strong enough...
I can't even find the location where xcelsius extracts its single setup file to.?
I have the sp3 file from SAP software delivery - where the hell would I find the /add-ons/ReportingServices folder to install the component...
do they make it intentionally difficult?

Upgrade 2010 to 2013 with SQL Reporting Services

I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David Jenkins

Hi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Firefox Version 27 Reporting Services Action Menu Error. An error has occurred with the data fetch.

Hello, since I've updated to Firefox 27.0.1 on Windows 7, I'm encountering a problem with Reporting Services on a Sharepoint site. It is a Sharepoint 2010 site with SQL Server Reporting Services 2012 Sharepoint Integrated mode. I was previously on Firefox version 26 and didn't encounter this problem.
When a report is open and you use the Actions link on the Reporting Services toolbar, I receive the following error messages.
An error has occurred with the data fetch. Please refresh the page and retry.
I've tried updating to Firefox 28 beta but the same error occurs. I see another user is having the same problem here. http://sharepoint-community.net/forum/topics/reporting-service-and-firefox-27
Any help would be appreciated. Thanks!
Ryan

Rachel, I did perform the Sharepoint file alteration discussed in the other article and it did stop Firefox from producing the error. I've done some testing on some other browsers and have yet to encounter any problems with the fix however I'm hesitant to perform that workaround in a production environment.
Thanks for looking.
Ryan

FEP 2010 Antimaleware action reports showing blank

Hi,
We have configured FEP 2010 with SCCM 2007. Every reports was working but suddenly now antimaleware action report showing blank for last week.
When checked FEP dashboard it shows infected systems but its report is coming blank.
So please help.

Hi,
The FEP DashBoard shows the data that is active in SCCM, the historical data and more in depoth reports are genrated from another database the FEP Datawarehouse, There are SQL Agent tasks that synchrinise this data and normally this error is caused by a
problem whit these jobs. Here is a post on the error and where to start to look.
http://social.technet.microsoft.com/Forums/forefront/en-US/57375e2c-6785-4680-a86e-99324afb4388/fep-reports-history-not-working-fepgetnewdatafepdw111-sql-job-fails?forum=FCSNext
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

I can't access a report in reporting services in a VM via azure website with reportviewer

Hi. I just create a VM with Reporting services, create a dataset, and a report, but when i try to access that report from my azure website via reportviewer i receive the error "the request failed with http status 401: unauthorized". Somebody with
an idea about what is wrong?. I set reportserver URI, report Path, user and password to the reportviewer.
Thank you in advance.

Hi,
Thank you for your post.
See this article in Books Online:
http://msdn.microsoft.com/en-us/library/ms156014.aspxfor
information about how to configure security in Reporting Services
http://msdn.microsoft.com/en-us/library/ms156034.aspx
If it is the SQL Reporting report server then follow these steps.
Resolution: On the Server Home page select the
Allow other Windows Azure services to access this server checkbox.
To open the Server Home page:
1.
Go to https://windows.azure.com
2. Navigate to the SQL Database server
3. Click Firewall rules
4. Select the Allow other Windows Azure services to access this server checkbox
Also refer this link for more details.
http://msdn.microsoft.com/en-us/library/hh403967.aspx
Girish Prajwal

Reporting Services Webpart - web part does not auto render consistantly

We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter. The behavior of this web part is not consistent. There are times when I open up a site
and the web part will auto render the report. 5 minutes later I can go into the same site, and the web part does not auto render the report. I have to do edit page, or close and re-open the web site. Has anyone experienced this type of behavior.
I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.

Hi Karen,
If the parameters have default values in the report, then the report can be rendered automatically.
For this issue, I recommend to verify the things below:
Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
Does this issue occur in the server side or client side?
Please add the site to trusted sites in Internet Explorer to see how it works.
Please change another browser to see how it works.
For narrowing down the issue scope, please test with another report and compare the results.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Reporting Services - All Datasets Broken

Hello there.
We’re having some problems with Reporting Services on a prod site and I was hoping someone might be able to offer a suggestion.
Here are the facts :
We have a SP Server 2010 (not foundation) farm which uses Reporting Services. There is 1 web / application server and 1 SQL server. Reporting Services 2008 R2 is installed on the SQL box.
Sometime in the last 2 weeks the reports all stopped working (last known report run 2 weeks ago). This was picked up yesterday. I'm not aware of anything being manually changed in the farm to cause this.
The reports report directly on SP lists using datasets with SharePoint data connections. There is one dataset per list.
The SQL / Reporting Services box has previously had SP installed on it (Ouch! Inherited system – not sure why SP was installed on SQL box).
A few weeks ago we stopped all SP services on the SQL box but did not uninstall SP from it. This did not affect reporting at the time.
When a report fails, we see this message in the UI :
Looking in the reporting services log messages are like the following, one per dataset :
Query execution failed for dataset 'DataSet1'. ---> System.ArgumentException: Feature '22d91f57-00d1-4e0b-9c04-863a82deaa07' for list template '10001' is not installed in this farm.
The operation could not be completed.
This happens for all datasets for all reports. All datasets are complaining that the feature for the list the data set uses is missing. These are features with list definitions / instances for the lists used in the reports.
The initial thought was that someone had renamed a field or similar, but this would only impact that one dataset. What we are seeing is that
all datasets simultaneously broke.
The features Reporting Services are complaining about are indeed activated in SP in the relevant webs.
On the SQL box the folders for the features Reporting Services are complaining about are not present in the 14 hive at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\FEATURES, but then as far as I know they never were. On
our dev environment we deleted these feature folders but this didn't reproduce the same error.
We modified an unrelated SP list view yesterday via the SP UI. It’s unlikely but I wonder if there is some kind of list definition XML / voodoo behind the scenes that was interrupted by this.
If you open the broken report in Report Builder directly from SP (via the list context menu), you can run the datasets OK, and do a test connection for the data source - but if you run the report itself you get the usual error. If I use Report Builder on
my local machine to try to save to the web where the reports are stored, I get one of the “feature…is not installed in this farm” errors. I can’t even browse to that web in Report Builder without getting the error.
Things I've tried so far (my infrastructure experience amounts to restart things until they work):
App pool recycle web server.
IISReset web server.
Restart reporting service on SQL box.
Delete the view I thought might have been somehow related.
In summary I have no idea what the root cause is here or what has changed recently. I’m a
programmer and someone else who is no longer available set up this environment so I’m a bit stuck!
Thanks for reading.
Lee

We've resolved this.
It turns out the features it was complaining about really were missing on the Reporting Services box and needed to be present. I wrongly concluded this wasn't the problem initially when we deleted these features on a dev box, restarted a few things and reports
didn't break. I guess something was still being cached somewhere.
Best guess as to why the features went away is that when we disabled all of the SP services on the reporting services box via Central Admin, one of these (probably SharePoint Foundation Web Application), all custom features / solutions were removed
from the box.
Moral of the story I think is make sure your reporting services box is a valid part of the SP farm and has all required features present.
Cheers
Lee

FEP 2010 with Reporting Services in Clsster

Similar Messages

Maybe you are looking for