FEP Reports not reporting properly and report requirement

FEP 2010 running on SCCM 2007
couple of issues:
1)  When I run a report say computer list report I see a disconnect between the data shown in the report and information I'm seeing elsewhere in FEP.  Example, in the report it indicates Server A has definition 1.111.528.0 with last status sent
8/24/2011.  When I go to the definition status page and search for Server A its listed under up to 3 days old.  When I connect to the server it shows it updated its definition last yesterday and has definition 1.117.154.  The report component
is useless if its not in sync with whats actually happening.  Ideas.
2)  My CIO is requesting  a report that shows when the last scan was done on a computer and the outcome of the scan.  How do I get such a report as I don't see this option under any of the reports.

Found out what may be causing issue - How fix?
In my application event log I have the following shown below. (2 log entries shown)
When I manually run the SQL job step 1 succeeds and then Step 2 shows between Retries then job failes
 Log Name:     
Application
Source:       
SQLSERVERAGENT
Date:         
12/7/2011 1:17:08 PM
Event ID:     
208
Task Category: Job Engine
Level:        
Warning
Keywords:     
Classic
User:         
N/A
Computer:     
ServerA.Corporation.com
Description:
SQL Server Scheduled Job 'FEP_GetNewData_FEPDW_BUR' (0x58AAC16423628642B73B6F2C79C4D945) - Status: Failed - Invoked on: 2011-12-07 13:15:00 - Message: The job failed. 
The Job was invoked by Schedule 2 (JobSchedule). 
The last step to run was step 2 (ssisFEP_UploadSccmDataToDw_FEPDW_BUR).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">208</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-12-07T21:17:08.000Z" />
<EventRecordID>503055</EventRecordID>
<Channel>Application</Channel>
<Computer>ServerA.Corporation.com</Computer>
<Security />
</System>
<EventData>
<Data>FEP_GetNewData_FEPDW_BUR</Data>
<Data>0x58AAC16423628642B73B6F2C79C4D945</Data>
<Data>Failed</Data>
<Data>2011-12-07 13:15:00</Data>
<Data>The job failed.  The Job was invoked by Schedule 2 (JobSchedule). 
The last step to run was step 2 (ssisFEP_UploadSccmDataToDw_FEPDW_BUR).</Data>
</EventData>
</Event>
Log Name:     
Application
Source:     
  SMS Server
Date:         
12/7/2011 1:40:09 PM
Event ID:     
7405
Task Category: SMS_SRS_REPORTING_POINT
Level:        
Error
Keywords:     
Classic
User:         
N/A
Computer:    
ServerA.Corporate.com
Description:
On 12/07/11 13:40:09, component SMS_SRS_REPORTING_POINT on computer ServerA reported: 
SRS root folder "ConfigMgr_BUR" is not present or not properly configured SRS Reporting point server "ServerA".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SMS Server" />
<EventID Qualifiers="49152">7405</EventID>
<Level>2</Level>
<Task>85</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-12-07T21:40:09.000Z" />
<EventRecordID>503065</EventRecordID>
<Channel>Application</Channel>
<Computer>ServerA.Corporate.com</Computer>
<Security />
</System>
<EventData>
<Data>ConfigMgr_BUR</Data>
<Data>ServerA</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>On 12/07/11 13:40:09, component SMS_SRS_REPORTING_POINT on computer Server A reported: 
</Data>
<Data>
</Data>
</EventData>
</Event>

Similar Messages

  • My iPhone 5 is not charging properly and only the left speaker in any headphones is working

    Hi folks my iPhone 5 is not chagrin properly and only the left speaker on any set of headphones is working how do I report to apple

    Will not turn on, will not turn on unless connected to power, or unexpected power off
    No sound through stereo headset

  • Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

    Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue?  I have applied all Mac updates and still having problems with the trackpad.

    The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
    You can try doing a SMC reset however I don't think that is the solution.
    SMC RESET
    • Shut down the computer.
    • Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    • On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
    • Release all the keys and the power button at the same time.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    • Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    • Release the keys.

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    but could not identified properly
    Please clairify.
    charging for a week and still hasn't come to a full charged
    Sounds like you need a new battery.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.
    iPod Repair Pricing

  • Audio is not working properly and battery is not lasting

    audio is not working properly and battery is not lasting over 30 mins

    Hello swampdonkey,
    I see that you are having a problem with the sound and battery on the computer. I would like to help with this issue but I need some information.
    Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Photoshop CS6 is not installing properly and i am unable to locate the application

    HELP ME!!!! My trial Photoshop CS6 is not installing properly and i am unable to locate and open the application on my mac. I am just going around in circles from file to file and back to the starting "intall" icon

    I am on the Adobe Download Assistant. It was stuck at "less than a minute" for an hour and a half, showing that the installation was basically done, since the installation bar was full.  But it was stuck.  Now it has stopped all together, and is restarting the download from scratch.
    Apparently it does not save the download, or only saves a small portion.
    c:\adobe/CS6MasterCollection/MasterCollection_CS6_LS16.7z.adadownload
    It is at 85.6 MB, even though a short time ago it was close to 99.9% done with the 6,352 MB download.
    My internet connection is fine, all is working, and I am able to browse, etc.
    I have been careful to keep activity minimal on the computer, so as to avoid conflicts.
    The conflicts are with the Adobe Download Assistant.
    I amabout ready to just give up, and look for alternatives.
    Please help.

  • Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

    Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
    Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

  • ITunes Store will not load properly and returns too homepage in seconds

    iTunes Store will not load properly and returns too homepage in seconds what do I do too fix it

    I am having the same problem now, did you ever find a way to fix it?

  • Videos do play but are not loading properly and plays choppy.

    Videos on websites as www.omesakevideo.nl do play but are not loading properly and plays choppy, I don't have this problem in Safari or Chrome

    Try the basics from the manual:
    restart.
    reset.
    restore.
    iPod touch User Guide (For iOS 4.3 Software)

  • HT4528 I've purchased a few dozen songs from itunes on my iphone. A few of these songs will not download properly and I keep getting a "unable to download song" message. My account info is correct and full signal.

    I've purchased a few dozen songs from itunes on my iphone. A few of these songs will not download properly and I keep getting a "unable to download song" message. My account info is correct and full signal. It seems to continually keep trying to download but cannot. Please help!

    i do understand that.  if you purchased the music on the phone.  its still available to you.  if you go in itunes on your computer.  go to purchases.  there should be all the music you have purchased.  there you can download the song if it isn't already and then sync it to your phone which will add the song to the phone.  have you tried to power off phone and then try to download again.   the itunes way is just another option. 

  • I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    You will need to use an external DVD drive to run the disc installer that came you your machine. You can also do it with another Mac using the Remote Install Max OS X app. Finely, if you have access to another computer, you could burn the install image on a USB thumb drive, boot from that, erase the drive and run the installer.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • Does anyone have a problem where they try to download a movoie trailer the day it comes out and then it says iTunes is not working properly and shuts down iTunes?

    Does anyone else have a problem in iTunes where they download a movie trailer and then they get a message saying iTunes is not working properly and it shuts off iTunes?

    Hello Suzanne,
    Thank you for providing the details of iTunes unexpectedly quitting.  You have taken some really good troubleshooting steps already.  I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Maybe you are looking for

  • How do I add my hp officejet 6500 e709n printer to my ipad mini

    How do I add my hp officejet 6500 e709n  ( HPCA103A ) printer to my ipad mini? Airprint says no printer found & after buying this I can't afford to pay for other apps, ...help,I like my hp printer,..thank you.

  • Foreign to Local currency Conversion

    Hi Hyperion Experts, For our client we are building a planning model and they have the following requirement. The entity UK needs to be able to fill in expenses in different currencies, so in pounds, Euro, Swiss Francs, USD, etc. At the moment there

  • Relation between Shop id and Internet User in CRM

    Hi Guru's, We are using SAP CRM 4.0. Can you please let me know in SAP CRM backend how can i find the shop id from the Internet User. We have created a BSP application and hosted in Portal. In the BSP application we want to determine the sales area f

  • [UNEXPECTED] [2275:RT915351] java.io.FileNotFoundException: /tmp/xml/xdo117

    Hi All, Currently i am developing RTF template for standard RDF, 'INVOICE PRINT SELECTED INVOICES' in AR module. After we registered template in oracle applications we tried to run the xml output concurrent program (this gives input to template) whic

  • Query related to Blending

    Hi, We just want to know that what is the use of " Use Profile Defaults for All Hierarchy sets " in Source Tab. What is the use fo selecting /deselecting this check box.