FEP2010 - Addition of custom threats?

Hi,
We are needing to scan the network for particular files (threats) for which we have md5 and sha1 hash values. We are reviewing if existing software is best placed to do this.
Does FEP2010 have any ability to add threats to the ones that are already in the definitions. If so, can anyone point to any documentation for the process?
Kind Regards,

Hi,
Thank you for your post here.
As far as i know, FEP just detect the threats based on MS threats database. However, you can define proper policy to block some files you like. If you find any threats that FEP cannot detect, you could submit the samples to here:
https://www.microsoft.com/security/portal/submission/submit.aspx
Best Regards
Quan Gu

Similar Messages

Additional Results Custom Step using Variables in Name and Value to Log expressions?

I am trying to create a Custom Step Type for logging additional results - requiring a single Name and Value data pair included in the step.
I want to pass the name and value data in using two specific variables.
This functionality can of course be explicitly coded on a test step without problem, but I can't find a way to create a custom test step which inserts such a step i.e. automatically inserting the correct variable names into Name and Value to Log fields.
Any ideas how to accomplish this? I don't want the custom step users to have to type in the variable names every time they use it.
I am using TestStand 4.1.1
Message Edited by CIM1 on 04-20-2009 07:26 AM

Hi CIM1,
There are a few ways of doing this.
The simplest one would be to configure the expression in the Pre-Expression or Post-Expression (depending on whether you would like the Step Type to use the value in the variables or write the value to the variables) and then from here you can lock away the expressions from being edited. The caveat with this method is that you are obviously restricing the Pre/Post-Expressions for the step type.
Another Method would be to code some code modules to Write to/Read from the Variables and then calling these in the Steps Pre-Step SubStep or Post-Step Substep. The advantages of this method would be that you can search for the Variable, and if the variable is not present, you could create it before writing to it.
Hope this Helps.
Best Regards,
Steve H

Addition of custom tab and fields in cProject

Hello Experts,
I need to add custom tab and fields in cProject project definition level(type DPO).
As it is given in IMG help, there are two ways of doing this.
1) Addition of data in CI_DPR_PROJECT and Creating the field groups and including these fields in the field groups.
2) Creating the custom tab and assigning the webDynpro component to it.
I tried the first method. Here I am able to see the field group as the tab in cProjects but the fields included in CI_DPR_PROJECT are not appearing.
Please let me know how I can see the fields which are added to CI include.
Also,
For the second method what is the meaning of implementing the WebDynpro interface DPR_CUST_EXT_INTF ?
I appreciate if anyone explains step by step procedure for this.
Thanks in advance.
Regards
Maddy

hi Madhu,
By creating a custom tab and adding field you can do that.
Pls. follw the steps as below:
1)Enhance Data base table:
Follow the path:
Spro ->Collaboration Project ->Global Enhancement to Project elements ->Enhance Database table
You will get details about Object category, its Entity table and Structure with Customer Include/APPEND Structure
Then go to Se11 and make changes as mentioned below:
Add the fields required on cProjects Screen in table DPR_PROJECT in the Include "CI_DPR_PROJECT"
2)Run Program DPR_CUST_FLDS_IN_FC_MAP and pass structure : DPR_TS_PROJECT_EXTENDED_ATTR
Run Program DPR_CUST_FLDS_IN_FC_MAP in transaction code SE38 and execute it and in Structure w. Customer Include field, pass structure: DPR_TS_PROJECT_EXTENDED_ATTR, this will generate transport request
3)Set up field control.
Copy std. field control and create new.
Path:Spro ->Collaboration Project ->Global Enhancement to Project elements ->Set up field control
4)Create field group
Path: Spro ->Collaboration Project ->Global Enhancement to Project elements ->Set up field control
Define group to your field here for your field control.
5)Define Field groups for Customer Fields
Path: Spro ->Collaboration Project ->Global Enhancement to Project elements -> Define Field groups for Customer Fields
Make entry here. Name of group is Name of tab page in cProjects front end
Define your customer fields for field group
6)Assign field control to your Project Type:
Path : Spro ->Collaboration Project ->Structure ->Define Project type
Assign custom defined field control to the project type in Field contol field at the bottom.
With this seetings you should be able to see your custom defined fields in custom defined tab page.
Regards,
Niraj

CfP - CPR02 - how to add additional Regularized/Customer List

Transaction /TDAG/CPR02 there is a field with a dropdown for "Regularized/Customer List" under "data selection for substance list". How can I add additional options to this dropdown?

Hi Heidi -
I'm assuming that you have some other regulatory lists defined already in your system.
Go into the IMG, Eh&S->CfP->Basic Data->Manage user exits. Copy a COMPL_CAT exit - and name it something that is relevant - such as the name of the regulatory list you want to add.
Next, in the IMG again right below where you just were, EH&S->CfP>Basic Data->Specify User Exit Parameters. Here you'll configure the regulatory list that is associated with your new user exit - I think you should be ok when you see the entries that are there..
Take care,
Rob
Edited by: Robert Klosiewicz on May 27, 2008 9:27 PM

Addition of custom field in shopping cart at item level- SRM 7.0

Hi All
Can someone pls. let me know the step by step procedure for adding a custom field in the shopping cart at item level?
How is the field displayed in the portal screen and the settings for the same??
Also is this field available for manipulation through Business add-ins like other standard fields.
For e.g. I need to use the BADI BBP_CATALOG_TRANSFER to populate this new field.
Will it be available there once created?
Thanks
Kedar

Hi Kedar
Here are the steps....
1. Create a Custom field in SRM and append it to SC table structures in SRM
2. Add this field to the Custom field config for meta data at Item level in IMG>SRM Server> Cross application basic settings> Extensionsand and field control> Configure field control --> Configure control of fields at item level
3. THen find the respective web dynpro application and component for the shopping cart portal UI screen where you want the field to appear. You can do this by right click on the screen area and then select More Field Help
4. Go to SE 80 and enhance the respective webdynpro view by adding the custom field to the Context of the VIew and then adding it to the layout of the view at respective location. After doing this create a binding between the layout field and the context.....
More information around ABAP UI Flexibility can be found at:
http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
Regards
Virender Singh

Field addition to customized report

Hello Gurus,
We have requriement like this,
We have a reprot which is customozied in R/3 which has 12 fields in which 4 fields are key fields,
Eg:
Sales doc,itemno,delivery date and schedule line date are key firleds and in thid the data is getting filed up by customized program. We created the Generic extractor and pulling the data to BI system. Now the customer would like to add the sales employee field for which patner function is the must according to R/3 logic but our problme is sales document number is key fields hence it would be repeated but where as if we are calling the partner function then we will get repaeted sales document number. Please can any one suggest me alternative to add the filed wihtout make any changes t0 R/3 program and internally it is linked with 10 different program which a client does not want to do that... can we enhacement but how to include the vlaues...
Immediate res

Hi,
Just try again creating a database view.
Which are the tables from which you want to create view.
Regards,
Renjith Michael.
Edited by: Renjith Michael on Jan 11, 2008 5:29 PM

Addition of CUSTOM button in SRM SUS PO page - SRM702

Hi All,
Scenario Used : MM - SRM SUS.
Requirements : Need to add a custom field in SRM SUS PO ,click on which will communicate to ECC vai SRM and bring the DMS related information .
As am new to BSP , do we have any enhancement facility such we have in Webdynpro ? if not what will be the best approch we can follow in this case.
Thanks
Channa

HI Zoltan,
Yes you got my requirement, I have already added several customer field in the same page as per guidance by SAP Note 762984 , mentioned by Anil.
Now I want to add a custom button called "Fetch ECC DIR" and when user click on that ,need to call ECC RFC Module.
Thanks for your inputs, as am very new to BSP ,can you kindly provide some more details how can I achieve this,it would be of great help.
thanks
Channa

Non additive aggregation - custom defined aggregation possible in BW?

I have the following problem:
there is a key figure that is non-additive relative to one characteristic, e.g we need the third minimum as an aggregation for a time characteristic (there a 250 values for that characteristic).
Is there a way to create user defined (exception) aggregation (like Var or mean value) by ABAP Coding?
Message was edited by: Michael Walesch

Does your database support analytic functions? Last and first are analytics functions. If your database does not support them, BI has to prepare selects with subqueries and this could slow down the response time
Begoña

Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

Steps done:
1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
Please help. Thanks.
Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Re:Addition of Custom fileds in Portal

Hi
I have added a custom field in MDM Customer repository.
How to get that custom field displayed in portal

Hi,
Assumption: You are using Business Pkg to display data on portl
Please configure the Business pkg iView at Portal level again to add the custom field in your display field list... for instance if you want the field to be visible in Item Details, double click the iView and add the newly added field to portal display field list
Regards,
Dev.

Can auto Grouping PRs into RFX and also addition of custom fields of PRs

We are implementing SAP SRM 7 Strategic Sourcing .Our Deployment mode is classic.
PR is created in ERP .PR is having custom field called as expected cost.
We will process PRs in SOCO .
Question 1 :
We would like club PR into Rfx based on criterias.I Would like to know how we can do so .
Consider case I have 3 PR as PR1 , PR2 , PR3 .If criteria is matching then I would like to club them as
PR1 + PR2 = RFX.
Question 2 : While clubbing PR's and forming one Rfx from it , I would also like to add custom field expected cost
so exp cost 1 (PR1) + exp cost 2 (PR2) = target cost (Rfx ).How I can achieve this ?
Where I can write code .Would like to know such BAdi which will be helpful.
Question 3:
Can we Club PRs automatically and form Rfx? or Does SRM support only manual Grouping of PRs ?
If we can automatically club PRs based on criteria and form one Rfx ,How can it be done ?
<< Please do not offer points >>
Edited by: Rob Burbank on Sep 28, 2010 4:18 PM

Regarding your Question 1 - if targeting manual grouping of items, you could do so by going through sourcing cockpit, select the proper items and group them together and create one RFx. This requires your own judgement with regard to grouping criteria.
Regarding your question 3, which is automatic grouping, you could configure first via IMG "Define sourcing for product category" by defining a set of product categories as "Auto. Grouping and creation of Bid Invitation item w/out source of supply". This would group SC items automatically for one RFx. However, if you need to restrict the grouping with further criteria, you could implement BADI BBP_TRANSFER_GROUP, which is to split the automatic grouping by the system.
Your question 2 can be achieved by implementing BADI BBP_DOC_CHANGE_BADI for RFX (BUS2200) (by referencing its parent PR information).

Addition of custom links on Project Details screen to update Project

Hi,
I request help to implement a customization in Ms Project Server 2010. I would like to add a custom link on lefthand side menu of Project Details page. The link would display a page with key fields. On entering information in the fields and clicking Submit,
a custom code that triggers MS SharePoint 2010 workflow should be triggered.
The user triggering the workflow will only have read access to the Project. I would like to get technical information and code snippets to implement the requirement. Any help in this regard would be appreciated.

Hi,
I'm not a developer thus I'll let other folks jump in but I'd have 2 comments:
If the user triggering the workflow needs to enter values in custom fields and do kind of a save operation as per your description, he cannot have only read access to the project. He needs a read-write access.
Note that folks on this forum kindly give on their spare time to help the community about concerns, questions and issues on Project. What you are asking for looks like more to a consultation request (due to the fact that you are not yet facing any issues
since you haven't even started working on it), meaning what we do in our daily job (and are paid for). Hope some colleagues can anyway give you some tracks to start.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Addition of custom fields in trade promotion through AET

Hi ,
I have added a custom field in trade promotion general data ( header) through AET .
its store in table crm_mktpl_attr. but its showing some error related to data base limit.
is their any other table like 'crmd_customer_h' in TPM to add custom fields.
please find the attach error file.
Thanks,
shreeram sahu

Hi Shreeram,
depends at which level of promotion you need those fields.
If they are all needed at header level, you have to do a custom development at component level and use a custom table to save the values of the fields.
Using AET the limit is fixed by standard as the error shows.
Regards,
Giacomo

Addition of custom fields in Contract and mapping it with the fields in SRM

Hi all,
A custom field should be added to bid invitation in SRM and mapped to a custom( Z field) field which is present on the contract header screen in R/3 backend. Is it possible to map these custom fields. The custom field which is in the backend contract is a mandatory field for creating a contract in the backend. It is not getting filled so the contract is not getting created in the backend. One solution which we thought of was to create a csutom field on bid invitation and pass the value of the custom field to backend by concatenating it to any of the standard field ehich is getting passed to the backend and then splitting the standard field and retrieving the custom field value and restoring the standard field value. If you think of any solution do let me know.
Regards,
Asha

Hi
Pls refer to the following thread for more details
Custom fields not display in SRM5.5 Basic Data Frame
Custom fields not display in SRM5.5 Basic Data Frame
Hope it helps.
Pls reward suitable points.
Regards
- Atul

Addition of Custom Field in Shopping Cart

Requrement :
In the Item Detail screen on sources of supply tab add country field and inputbox & populate the inputbox with supplier country
when the Item Detail Screen is displayed
Steps I have followed :
1) Created Appende structure in INCL_EEW_PD_ITEM_CSF_SC structure
2) In the WebDynpro Component for corresponding view added the new field in context
3) Created label and inputBox in the view & binded the inputBox from context
4) Implemented the BADI BBP_CATALOG_TRANSFER and populated the field in the method ENRICH_ITEM_DATA
However, on SRM portal for shopping cart I see empty inputBox without the value.
What changes should I make so that I can see the value in inputBox? Please help.

in the enrich item data method, which table are you populating?
moreover, are you making the ev_sc_structure_used (or something like that) field as 'X'. if you dont make it as 'X', it wont transfer fields from this BADI to the SC.

FEP2010 - Addition of custom threats?

Similar Messages

Maybe you are looking for