Fermeture inopinée CC 2014 ?

Problème InDesign CC 2014 : Depuis les dernières mises à jour, l'application est en instabilité permanente. Notamment sur un gros fichiers (300 pages- images Haute déf, etc.) et il m'est impossible de me déplacer dans ce fichier (scrolling, fenêtre pages, ascenseur, etc.) sans que l'appli ferme inopinément.
Ré-enregistrer le fichier sous un autre nom ne change rien (ou pas longtemps), le redémarrage non plus et les réparations des permissions pas plus ! Quelqu'un a t-il une idée de la cause et des solutions ?
Je précise que le phénomène est apparu aprsè la mise à jour de l'OS en 10.9.5, mais que toutes les autres applis Adobe fonctionnent très bien (photoshop, illustrator, etc.).
Help !!!

Bonjour Gilles,
Concernant le probleme de fermeture inopinée de la Creative Cloud.
Je vous invite a prendre connaissance des liens suivants:
http://helpx.adobe.com/fr/x-productkb/global/troubleshoot-unexpected-behavior-user-account .html
Dépannage des erreurs système et des blocages | Mac OS 10.x | Logiciels Adobe
Merci.
Arnaud.

Similar Messages

Fermeture inopinée de labview

Bonjour,
je travaille actuellement sur un programme dont le but est de commander une pompe, l'idée étant de la faire tourner en endurance (500h).
Mon soucis, labview se ferme inopinément et sans message d'erreur de manière aléatoire, généralement au bout d'1h30, parfois plus.
Je n'arrive pas à trouver la cause du problème!
Alors si quelqu'un a une idée, je prends.
Merci beaucoup
Anne
PS.: j'ai essayé sur 2 PC différents, même résultat.
Résolu !
Accéder à la solution.

ci joint un exemple de ce qui peut etre fait pour borner la taille du tableau de données
Le principe est celui des globales fonctionelles ( voir sur le forum et tuto )
la partie d'init definie la taille maximale en nb de point , à placer avant la boucle
l'autre ajoute les données au fur et a mesure en tenant compte de cette taille max
il faudra faire de même pour G ( copier coller et renommer le VI )
n'hesite pas si tu as des questions
Cdt
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte
Pièces jointes :
store data.zip ‏26 KB

Fermeture inopinée de la fenêtre "réglages"

Bonjour,
Lorsque je veux ouvrir l'onglet "mail, contacts, calendrier" dans la fenêtre "réglages", la fenêtre se ferme.
Comment réparer cela ?
Je vous remercie

Bonjour,
J'ai eu un problème lors de l'envoi du message. Excusez-moi donc du manque de précision.
Mon problème était de fermer la fenetre de commande après l'éxécution d'un fichier batch.
J'ai résolu ce problème en ajoutant la commande "exit" en fin du fichier.
Y a-t-il un autre moyen en le faisant par Labview?
Merci
Cécile Graton

Notes a quitté de manière imprévu

Bonjour,
Je suis nouvelle sur le forum,
Je n'ai pas su trouver la réponse concernant la fermeture inopinée de NOTES.
Notes s'ouvre puis le message appraît : Notes a quitté de manière imprévu,
Avec trois choix possibles : IGNORER SIGNALER RELANCER
J'ai essayer plusieurs solutions dont la réparation des permissions, sans effet.
Je peux préciser que cela ne se produit pas sur le deuxième utilisateur de mon MAC BOOK PRO de mi 2012
Cordialement
MAMABERTHE

Adware Genieo is installed without your knowledge. Removing it will help,
1. Download and use free AdwareMedic to remove the adware
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.

Les applications disparaissent

Bonjour,
Config : PC - Windows 7 64bit - Carte video: nvidia GT640 - 8 Go ram
J'ai téléchargé Premiere, photoshop,after effect dans le cadre d'un abonnement à l'année.
Ces application se chargent bien, mais des que la page d'accueil apparait elle disparait 2 seconde apres!!!
Et ceci pour ces trois applications
Merci d'avance pour votre conseil,
Philippe DECOOPMAN

Bonjour.
En général, les problèmes de ce type sont dûs à des soucis d'installation ou de firewall, mais comme ils sont aussi spécifiques à chaque poste, j'aurais tendance à vous proposer directement le support client, qui fonctionne par chat.
Si vous n'avez pas de message d'erreur ou de piste sur la raison de cette fermeture inopinée, c'est sans doute le meilleur moyen.

Fermeture des logiciels Adobe qui se transforme en "a quitté-"

Bonjour à tous,
Après un (long) voyage dans les méandres de ce site… j'en viens au sujet qui m'amène ici.
Depuis 3 mois environs lorque je ferme l'un des logiciel Adobe, j'ai un message, après sa fermeture qui me dit que le logiciel a quitté inopinément.
Pas grave mais zabi tt de même. Quelqu'un a une idée ?
Précision, je bosse sur un Mac PC G5 en os x10.4
Merci d'avance

J'ai exactement la même erreur...j'ai posté à ce sujet, aucune réponse jusque-là.
Logiciel en question : After Effects CC 2014.2
Win 7.1 Pro

Erreur à l'ouverture et à l'enregistrement d'un fichier dans Dreamweaver cc 2014.1

windows 8.1
Dreamweaver cc 2014.1
6947 build
Bonjour,
Suite à la mise à jour de Dreamweaver cc 2014.1, j'ai des alertes à chaque ouverture et fermeture de fichier (voir captures ci-dessous).
J'ai désinstallé et installé de nouveau l'application sans solutionner le problème. Pas de résultat sur ce cas, en faisant une recherche dans les FAQ et forum.
Quelqu'un a-t-il une solution ou une manip pour supprimer cette erreur ?
merci bien
Erreur à l'ouverture d'un fichier
Erreur à l'enregistrement d'un fichier

résolu
pour info :
il faut supprimer le fichier .dat dans le dossier C:\Users\[utilisateur]\AppData\Roaming\Adobe\Dreamweaver CC 2014.1\fr_FR\Configuration
et redémarrer l'application

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

Image Processor Tab Missing in New Adobe Bridge CC 2014

In the new Bridge CC you used to have a TAB under tools called Photoshop which you could run the script Image Processor for easily processing jpegs. What has happened to this and is their maybe a new way of processing jpegs to lo-res that I dont know about from tiff or jpeg or does my bridge have a problem?
I have attached a image grab from my bridge that shows that the tab is not there. I know that you can access image processor directly from Photoshop, but they used to always be linked.

No, it is still in Bridge CC.
Did you uninstall Photoshop CC after installing Photoshop CC 2014? If so, that may have removed some of the Bridge integration scripts by mistake. Re-installing Photoshop CC 2014 should replace the scripts.
and it should give the image processor tab back

Error in compiling Photoshop CC 2014 sample project

Hi,
I am trying to compile SDK sample project "outbound". but it is showing errors, as "Parse Issue: Unknown type name 'DialogPtr' " in DialogUtilities.h .
DialogUtilities.h file is in "Adobe Photoshop CC 2014:photoshopsdk:pluginsdk:samplecode:common:includes".
even if I add this path in project settings it still shows the errors.
how can I make this work?
I am using Photoshop CC 2014 and Xcode version is 4.6.3 (4H1503)
If you have any idea regarding project settings then please let me know.
Thanks and regards,
Priyanka.

Are you using the CC 2014 release of the SDK?
The DialogUtilities.h for mac do not work. They are the old Carbon API's. See the Dissolve example for an Objective-C UI.
I would comment out the DialogUtilities.h include and other associated headers for Carbon UI. Some Carbon calls still work that are unrelated to UI.

SharePoint Foundation 2013 - March 2014 Update Issue - Need help

We've just applied the SharePoint Foundation 2013 March 2014 Update, it always requires that we run the SharePoint Products Configuration Wizard at the end of install, but this time it's getting stuck at step 9 of 10 (the profile sync service cannot be
started even as admin). Is anyone else having any issues with this update? Has anyone else applied it yet? Is anyone else planning to apply it?
If anyone can help with advice on this I'd appreciate it.

Hi,
We can still access CA but sync will not start. Tried rebooting after the failed configuration and tried to run it again but it didn't work.
4/2014 10:45:16 5 ERR            Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 5 ERR            An exception of type System.ServiceModel.EndpointNotFoundException was thrown. Additional exception information: There was no endpoint listening at
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at //localhost:32843/SecurityTokenServiceApplication/securitytoken. that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 1 ERR          One or more configuration tasks has failed or some tasks were not run
4/2014 10:45:16 1 INF          Leaving function TaskDriver.OnTaskDriverStopping
04/14/2014 10:45:16 1 INF        Leaving function TaskDriver.ExecuteTasks
04/14/2014 10:45:16 1 ERR        One or more configuration tasks has failed to execute
4/2014 10:45:16 1 ERR          Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at D:\Logs\PSCDiagnostics_4_14_2014_10_44_8_154_1605984328.log, fix the problem, and run this configuration wizard again.
04/14/2014 10:45:16 1 INF          Entering function StringResourceManager.GetResourceString
4/2014 10:45:16 1 INF      Leaving function TaskDriver.Run
04/14/2014 10:45:16 1 ERR      Post setup configuration was not run successfully when using the command line task driver module
04/14/2014 10:45:16 1 INF    Leaving function PsconfigCommandLineMain.Main
This is the meaty part of the errors we are getting. Right now our entire site is down. If you know of anything to remedy these errors let me know.

Mid 2014 13" rMBP - Image Persistence

Good Morning,
Last night I came across an image persistence issue that seems to plague most rMBP users that have been supplied with an LG Panel.
I'd like to confirm that this issue is still present in Apple's most recent iteration of the Macbook Pro (Mid 2014). I purchased this 13" rMBP just under a month ago, I was hoping to improve my productivity with this purchase only to find it has hindered it further. I work with illustrator and photoshop, sometimes both at the same time. I've noticed switching between applications that there seems to be a faint silhouette of the illustrator window. When I first noticed this issue I told myself "There's no way that's burn-in, this is clearly not a plasma display and it's 2014" After a prompt restart, the faint silhouette was still there and all I could feel was frustration and complete regret after making such an expensive purchase. The feeling I had at the Apple store was similar to when I purchased my Canon 5D, you save up all this money and expect a premium product. Only this time around, I'm not quite as joyful about my purchase. The faint silhouette overlays my photos, and can be a problematic during post production. Although the silhouette may only be visible for minutes at a time before it completely disappears, this has caused me to walk away from my Mac. Which is something I have been trying to avoid, and it was working until last night.
My question is, has LG made any changes to their most recent production of Retina displays?
Do 13" rMBPs come with Samsung displays?
What are my options outside of the 14-day return window?
I'd like to avoid repair, one time I brought in my iPad and the genius was practically sliding and dropping my iPad on the genius bar. I know that Apple tries to set the bar when it comes to personal computing, and in some cases customer service. So, is it wrong of me to expect quality from a premium manufacturer?
Thank you.

No, I did not misread, it died in 4 hours and 20 mins.
That sounds better. You confused me with:
...only 4:49 minutes remaining.
My science-major mind saw that as 4 minutes 49 seconds.
Still, you should get more runtime. Here is another Apple article that helps with battery life and heating issues:
Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity - Apple Support
The article was written before OS 10.9 and 10.10, so you need to make a change in Step 3 for 10.10. To make the required change from "My Processes" to All Processes," you now need to use Activity Monitor's "View" menu:
Another thing that is not clear in the article is that you will not get good results if you run the test immediately after a restart. Use the computer normally for about a day so that any runaway processes are activated, quit any apps you launched, then run the test.

New 2014 X1 Carbon Touch - 1 Week Review

I've had the New 2014 Carbon X1 for about a week now, so I thought I'd post a review about my experiences thus far.
The version I received was the high end model, i7 4th gen, 8gb ram, IPS 2560x1440 touch display. This is the first Lenovo device I have purchased, and I did so at the recommendation of my brother who has owned a T series for the last 3 years. I am a film student, so my intention is to do some light video editing (not rendering) and lightroom/ photoshop work on this device (in addition to daily use of OneNote). I was looking for a powerful ultrabook with good build quality, battery life, and cooling when I purchased this laptop.
Hardware:
The hardware on this device has highly conservative look, which I appreciate. The laptop doesn't draw attention, but is pleasing to the eye when viewed up close. I like the fact that there are not as many creases or lines that run through the body of the device (when compared to other devices), which results in a more free flowing but unified appearance.
The matte plastic on the top of the lid has a slightly rubberized texture, making the device easy to grip. My hands get hot and moist consistently, so the lid does occasionally pick up some faint moisture streaks if I carry it without a case. The slightly rubberized texture is pleasant to the touch and is easy to wipe down with a damp cloth. The inside of the device has a similar plastic around the keys and palm rests, but does not attain as much of a rubber (soft) feel as the lid. The texture on the palm rests is good, and stays cool under extended typing conditions.
At first I was having issues with the keyboard whereby I would press the spacebar too early in a word. This is due to not pressing the letter keys down firmly enough. After adjusting my finger pressure while typing, I have been able to avoid this problem for the most part. The pressure I am applying to the keys is just a hair more than I am used to, but it is something that doesn't cause a major inconvenience. The backlight on the keyboard is excellent, not too bright or too dim at any one moment.
The fingerprint reader took several tries to set up, mostly because there is a discrepancy between the lenovo fingerprint software and the integrated Windows 8 security fingerprint setting. By installing my index finger for login on both programs, I was able to successfully unlock the computer from sleep with a swipe of my finger. I am really impressed by the integration of a light on the sensor. When my print isn't accepted the first time, an amber color light flashes on site. Its easier to just look at the light than have to switch my glance back to the monitor after every swipe (like my previous HP laptop). Upon a successful swipe, a lime color light flashes on the reader.
The screen on the device meets my expectations in every way. The display is IPS which is required for accurate photo editing, and it is LED which makes it very power efficient. Viewing angles are fine, but they could be a little better. Brightness is excellent, but the initial settings have Auto Brightness enabled. On this setting, pumping the brightness up to "100%" really means 100% of what the Auto Brightness function deems appropriate for the current ambient light. To have full manual control, Auto Brightness must be disabled. This results in a much brighter screen with beautiful whites, deep blacks, etc. This is a 300nit display so brightness is very well addressed. As a side note, the laptop was shipped with what appears to be an installed screen protector. There are several holes around the microphones and camera, and a tiny seam along the edge of the screen. The protector is virtually unnoticeable, so I'm leaving it on for the time being. It is much cleaner than any other factory installed laptop screen protector (or film) than I've ever seen (no bubbles, peel-off tabs, or misalignment).
Cooling on the device is good, but it did not exceed my expectations. On power saver mode, the bottom of the laptop is cool to the touch except the back right corner. To the touch the corner feels as warm as something that's been in the sun for 5 minutes or so which is excellent. I have a temp gun so I'll have to check specifics later. On high performance mode, heat significantly increases. Most of the bottom of the laptop heats up even if no intensive tasks are being run. If the laptop is on my lap, I prefer it to be in power saver mode for this reason.
Battery life is good for such a small laptop. I have 8 hours of back to back classes and I type notes basically the whole time. With this laptop, it is entirely possible to go that full period without a charger. So far I have done this twice. The settings I use are Wifi off, low brightness, and I enable high contrast mode in accessibility center so the glaring white of OneNote doesn't blind me during the film screenings.
Webcam looks great for google hangouts, and the microphones are the most sensitive I've ever used. They can pick up the voice of someone to the side and across the room with great clarity.
Overall the weight and feel of the laptop is very pleasing. Such a light weight for its size, and it feels solid to the touch and doesn't flex the slightest when handled different ways (carbon fiber ++). When compared to a macbook air, it is nearly identical in size and weight. However, I find typing on the lenovo is much more pleasant because the front edge of the palm rest isn't sharp enough to dig into my hands.
Software
The Lenovo Solution software (pinned to taskbar upon installation) is easy to use and responsive (unlike similar HP suites). I am actually going to rely on this software for updates instead of disabling it.
For the first few days of use, there was a touch keyboard toolbar button pinned to my start bar that would appear again even after disabling it. I researched the problem and it was permanently removed from the taskbar by uninstalling the touchpad driver and reinstalling it. Odd.
The adaptive row of keys is a good idea, but it is not as responsive as I'd like. When using the visual gestures or dragon voice control, there is significant lag between pressing the adaptive key and the program actually running. Each time, a lenovo window appears and it takes several mouse clicks to get to a functioning state for each button. One thing I am VERY disappointed about is the lack of any play/pause/stop/next/previous buttons for the adaptive row to use with a media player. These buttons are necessary, and not having them is unacceptable in my opinion.
Touch responsiveness is liquid smooth in both power saver and high performance modes. Zooming in on bing maps, drawing with all ten fingers, swiping through metro - all a delightfully lag-free experience.
Windows 8 - ahhhhhh. This is my first device to run windows 8, and it's alright. It'll take some getting used to, but from my experience so far it is responsive and useful in its design. I really want to be able to pin a firefox link to my start screen, but it seems like all I can do is pin the firefox app instead.
As mentioned in a previous post, there are several issues with programs that aren't adapted to the ultra high res display. That discussion can be found here.
The sleeve I purchased for this machine was the "V7 Ultra Protective Sleeve for 13.3-Inch Ultrabook and Notebook". The fit is great (the slightest bit loose on the ends) and the quality is above par for such a low price. I spilled a significant amount of apple juice on the case just yesterday (shakes head) and it protected the notebook well.
Overall Experience:
I'm pleased with my purchase. High price point? YES. For that amount I think the RAM should be at least 16gb and the SSD could be 500gb. Overall it is a pleasure to use and look at. Honestly so many things are right about this machine, it just allows me to focus on my work and stop worrying about my battery level or my trackpad glitching or the CPU overheating or lag or other petty issues that other notebooks make you deal with. That's what I like - its a smooth connection between me and getting things done while away from my desktop.
I haven't edited video on it yet, so that will come in a few weeks. I'm planning on buying an external drive to hold the files while I edit, then just plug it into my desktop when I get home ready to render.
Eli Bottom
elibottom.com
imagesalt.com

ColonelONeill wrote:
How's the new clickpad?
Does the keyboard flex under reasonable pressure?
Is the adaptive bar actually a pixel-based LCD or just a series of predefined patterns like the really old LCD displays?
The "new" clickpad is very slick. The texture is good but just a little too rubbery for my taste. In comparison with my brother's old T series, I prefer the X1.
Under reasonable pressure, absolutely not. The amount of force it takes for me to flex it is something I'd never do under normal use. It feels very solid in my opinion.
Upon a close inspection, the adaptive touch bar appears to be the old LCD type. I really want those media keys.

My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      2% iTunes
      2% WindowServer
      0% coreaudiod
      0% fontd
      0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

?intel iris drivers on macbook pro retina 15" 2014

hi all, i need help i'm lost
it's been 3 days trying to install the intel iris graphic card drivers for the iris 5200 that is shipped with nvidia 750m on the macbook pro 15" retina 2014 and i'm not able to install the drivers.
i installed the preview version of win10 and i rolled back to the preview version of 8.1 both 64bit
and there is something weird, because my bootcamp is only able to install a preview windows version, even having a pro version with product key of 8.1, at the end of the installation, windows say that the changes on my computer can't be saved, so no working windows 8.1 pro
as you are aware, bootcamp download the intelLegacyHdGraphics64.exe together with all other drivers like the nvidia one.. but only the iris drivers will be not installed. the error message is always the same: this computer does not meet the minimum requirement for installing the software.
so, i went to intel site and i downloaded all available drivers, the intel SDK for ocl applications... 2014.exe, the "opencl runtime 14.2x64. package.. installed correctly.
what i'm not able to install are all drivers i could find on the site for the iris.
Intel® Download Center
but i'm getting always this message: this computer does not meet the minimum requirement for installing the software.
the nvidia 750 works as expected, and i did try everything to install the iris drivers.
i also tried to uninstal the nvidia drivers also using the device manager, not just simply disabling it.
and after booting again.. the iris is not listed in the device manager, just the microsoft default display. and trying to install the drivers manually failed too, but that was expectable since there is no intel iris menu from which to pick manually the drivers.
if i try to install using the compatibility tool i get the message that the os is not supported
I'm lost lost lost
did someone try to install them? maybe had luck under a win7? or it is a lost war?

patroo wrote:
I Want to use luxrender and luxmark on windows too
the benchmark score of the iris 5200 in osx mode is 4880 while the score of the nvidia is 900/1100
that is a huge difference in speed
I am unable to search http://www.luxrender.net/luxmark/ for benchmark data. Is there another way to get to these numbers? If you use the nVidia that is currently exposed to windows, do you run into any issues for Rendering?
Edited: on my acer running win7, i disabled the intel graphic card for the sake of Nvidia 330m from bios, and it works
this should be possible in win 8.1 too? as i know those setting aren't anymore available as bios mode.
is there a way to unhide the iris 5200 and permanently disabling the nvidia 750 in windows?
You may want to start by looking http://forums.macrumors.com/showthread.php?t=1658931.
btw maybe you can answer to this. Running luxmark in yosemite, when i benchmark using cpu, iris, or cpu+ iris the fun becomes noisy as it should, but if i benchmark just the nvidia card the fun doesn't start. and this should be not normal at all.
This seems to be normal behavior from my experience. The integrated GPU (CPU+Iris) produces much more heat than the discrete nVidia. If you do not have a case on your MBP, put your palm on the bottom panel, and run both tests. You can also use something like iStat to look at the temperatures of various components while running tests.

Fermeture inopinée CC 2014 ?

Similar Messages

Maybe you are looking for