'Fetch' email slow or not working since os4 upgraded

Having upgraded to the new iphone os4, I have had issues regarding 'fetch' email messages. Simply, I have "fetch' enabled for three email accounts set to 'every 15 mins' but I only get new emails when I go into email and iphone checks for new mail. Eg. I had a colleague send me a message at 14.54 but I manually checked my email at 17.05 and the message only then came through.
It should have 'fetched' that mail very soon after it was sent and left a red number 1 showing on the mail icon. Did it again later the same day..
Btw my phone also decided to shut down twice during a phone call at the weekend.
I use my phone for getting important client mail when I'm out and about so could miss important/urgent info or job requests..
Anyone had same?
Is there a fix?
cheers

I had a similar problem, as I wasn't receiving any new emails on my IP4. I would receive new emails at home on my MBP, but not on the iPhone.
My fix was on the MBP.
Go to Mail/Preferences/Accounts/Advanced and uncheck the box that states "Remove copy from server after retrieving a message".
This now allows new emails to be seen at home on my MBP, on my iPhone and on my IPS's email server.
Hope this helps with your problem.

Similar Messages

HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.

The remember me dialog box does not work since I upgraded to OS 10.10.1 and Safari 8.0

The remember me dialog box on various web sites does not work since I upgraded to OS 10.10.1 and Safari 8.0

Try running the combo update.
10.9.2

TS3899 Push email from AOL not working since IOS7.1 update?

As usual updated all idevices once notification received, only problem is my AOL email no longer pushes the data and I no longer receive notifications of new mail until it is "fetched" either by a timed fetch or by opening the mail app.
This applies to all my devices iPad Air, iPhone 5s and iPad mini.
Annoying!
Tried resetting the account and playing with the push and fetch settings, currently set to push with fetch set to 15 minutes.

AOL still not working, but reading the comments looks like the finger of blame is pointing towards AOL and probably just a coincedence it happened around the same time as the IOS7.1.1 update.
So far I have had to put up with cancelling the push option and relying upon a fetch scheduled for every 15mins. will have to see how that goes.
Anyone contacted AOL?

Aperture email sharing (Outlook) not working since upgrade to mountain lion

Just upgraded to Mountain Lion and sharing of photos via email no longer works. I've seen posts of problems with Apple mail; but not sure if others are having this issue with outlook. When I choose 1 or multtiple photos to share vioa email; it goes through an export process, Outlook dialogue email opens, but NO attachements or files embedded.
This worked fine before upgrade; others experienced or have solution? I can certainly send photos the "old fashioned" way; but at 10mb a photo, not practical. Very frustrating.

I have found it. It seems that in Lion we had to convert the filename from Mac native to Posix format, in mountain lion this is no longer necessary. If you want to modify the script here are the instructions:
Finder->Applications. Right click on Aperture and choose "Open package contents"
Contents->Plugins. Open "Microsoft Outlook.applescript" (with the applescript editor)
You should see the following 3 lines:
-- convert the image path from UNIX to Mac
set this_imagefile_path to (POSIX file this_imagefile) as string
make new attachment at new_message with properties {file:(this_imagefile_path)}
these should be replaced with this line:
make new attachment at new_message with properties {file:(this_imagefile)}
You are not allow to directly edit this file so save a duplicate somewhere.
Rename the original script file.
Copy the modified file to the Contents->Plugins folder of the package. It has to be called "Microsoft Outlook.applescript"
You will probably be asked for your password a number of times.

Full-Text Search has not worked since we upgraded to 2012

I have a filestream database and table. Our full-text searches have always worked until we upgraded to SQL 2012 in December. Now, no file that has been uploaded since December is searchable. What has gone wrong here. It should have been
a clean upgrade. We are not getting any error messages. We are just not getting any records returned when we search on a word that we know are in the documents we've uploaded since December (for instance, the word 'aluminum').
Filestream is enabled for the instance.
A full-text catalog exists and contains a full-text index (the same one we've always had). Full-text indexing is ENABLED.
I've tried rebuilding the catalog and the index. I've tried to do a FULL POPULATION on the table.
We haven't changed our queries nor the way the files are uploaded.
Nothing works. I have been a database administrator since the SQL 2005 days and I have never seen anything like this.
Please help.

Hi GINGER PIERCE,
Since the issue regards SQL Server Search. I will help you post the question in the related forums. It is appropriate and more experts will assist you.
According to your description, in theory , if you can do a full-text search for SQL Server 2008, when upgrading the SQL Server version from 2008 to 2012, the Full text indexing feature should be run well in SQL Server 2012 databases. If not , you can try
to restore your database from SQL Server 2008 to SQL Server 2012, create an new Full-Text Catalog and Index on the table or view in the database, and then use Full Text Index to search words, phrases and multiple forms of word or phrase via FREETEXT() and
CANTAINS() with “and” or “or” operators. check if it is normal that the full-text search feature is enabled in the SQL Server 2012 instance. For more information , see:
Full Text Search step by step in SQL Server 2012.
Note: In SQL Server 2012 SP1 ， the server will report that Full Text Search is not supported in this edition of SQL Server when it clearly is. The workaround is to create the initial catalog by using a T-SQL query:
CREATE FULLTEXT CATALOG
In addition, since it is a fileStream database, we need to verify if you do Full Text Searches on documents in FileTables, if yes, you should enable FileStream database for your SQL Server, and enable FileTable options for the database. For more information,
see:
Full Text Searches on Documents in FileTables.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

IPod Touch 2G Home button not working after OS4 upgrade

Hi there,
hope someone can help. Upgraded an iPod Touch 2G to OS4.1 and teh home button will not work now normally, but will work if its attached to a PC and iTunes. Anyone seen this before and how to fix it?
Cheers,
Martin

HI there,
thanks for the reply. Tried both of what you suggested, also tried the home button thing only working while plugged in with two computers and two different leads which is why I suspect is an operating system thing.
I may try downgrading the operating system next, just have to find a copy of an old one somewhere.
Cheers,
Martin

IChat not working since Leopard upgrade

Using a 2GHz iMac. Trying to connect to my brother's 2 GHz (running 10.4) Macbook. Used to work fine. Since upgrading to 10.5 earlier this week, I keep getting messages such as "There was a communication error during your chat" "Did not receive a response from........etc.", and never actually get through.
The iMac's on a wireless network, - an airport extreme and an airport express, bridged together to extend the range.
I've had a look at the other similar problems on the discussions board, tried changing the network port settings, turning off internet sharing, changing the Quicktime streaming speed, but no luck.
Anyone have any similar issues, or better, any solutions? Not much point giving me the ability to change the background in iChat, if nobody but me can see it!

Possibly.
Depends on how the Tiger person has ports open in their routing device.
This Doc http://docs.info.apple.com/article.html?artnum=93208 Say iChat goes through a set of Stages using 6 ports (Invite on port 5678 - Negotiation on port 5060 and then the chat on 4 ports starting at 16384 and going up)
This Doc for iChat 4 http://docs.info.apple.com/article.html?artnum=306688
Says it does everything on one port but starts at the top of the range listed in the first Doc and then moves down oly if the others are busy or do not work And this is limited to 10 ports.
Now some devices can only Port Forward. On top of that some of those can only Port Forward 20 ports and the Tiger list is from 29 ports and on two protocols which can mean 31 entries.
These users have been managing 1-1 chats on the lower ports fine by missing out setting certain ports they don't need like Bonjour and /or Jabber and possibly some of the top end of the group of twenty.
Jabber and Bonjour can be a total of 7 entries and therefore is used significantly cut into the group of twenty.
This leaves a potential gap between iChat 3 and iChat 4 in certain circumstances.
I hope I have made that clear enough.
Thanks for the points
8:10 PM Sunday; November 4, 2007
Message was edited by: Ralph Johns (UK)

My TV video/audio cable will not work since the upgrade. Only get audio on TV.

My TV video/audio accessoriy cable will not work after the iOS5 upgrade. Only the audio goes through to the TV. Any solutions?

no answer

Verizon email; Thunderbird client; Not working since 3/25/2013;server name change

Yesterday, 3/25/2013, I noticed that email wasn't working from my thunderbird client. After a day of assuming that the problem existed elsewhere, I found on this site where it says to use POP.VERIZON.NET, port 995, and SMTP.VERIZON.NET, port 465. After grumbling why didn't I hear about this name change?, I changed them. At that time I noticed that the PORTS were wrong, too. They'd been right, and now, not. Most confusing. I changed them. Each account has CONNECTION SECURITY SSL/TLS and NORMAL PASSWORD.
But: when I try to connect, I get: An error occurred during a connection to pop.verizon.net:995. You have received an invalid certificate.....Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate...."
I am at a loss. What's wrong, other than that email seems to be choking on security?
Solved!
Go to Solution.

Found in another post where a person said the INCOMING.VERIZON.NET and OUTGOING.VERIZON.NET did still work, so I tried it, but still got that Certificate error. Found someone else who said they had to say 'no connection security' before it would work, and so I tried that -- and it did.
Not thrilled about this, but the client is working again.

Email not working since Yosemite upgrade

After upgrading to Yosemite, I couldn't receive emails on my Mac, but I could on iPad and iPhone. After 2 hours on the phone with Apple, it was discovered the fix for the problem was with my internet provider. Once we got in touch with them, they fixed it in a matter of seconds.

Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Firefox is not working since the upgrade to 6.0.2. Why?

On thursday sept. 8th, Firefox upgraded to 6.0.2. Since Friday morning when I turned on my computer I have not been able to open Firefox at all. I can use IE with no problem. I went to technical support and followed the instructions on what to do and I still can't connect. The internet connection is working fine. I have Windows Vista. I also went to Add-ons and all the add ons are disabled because they are not compatible with FF 6.0.2. I been a customer of FF for a very long time and I have never had any problems with the upgrades until this newest one. No errors come up it just says Problem Loading Page. Can someone please tell me what is going on and how to fix it. Thank you

You're welcome

HT4061 SD card to lightning adapter not working since IOS7 upgrade

Since upgrading to IO7 on my ipad 4 retnia display, my SD card reader to lightning adpater is not recoginzed.
no warranty on ipad anymore.
would I have to pay for a geinies appointment for this?
I have noticed others are having the same issue.

Covered here:
https://discussions.apple.com/thread/5344457
Seems like the latest reader and only from Applestore will work.

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Seagate external hard drive is not working since I upgraded to yosemite. Can some one help me?

I can't connect my seagate external hard drive since I updated to yosemite. Im getting error code 71, can someone help me?

Try restarting with your drive plugged in. I have a very old 100GB seagate drive and it has been working fine for me so I assume yours would too.
-crazy

'Fetch' email slow or not working since os4 upgraded

Similar Messages

Maybe you are looking for