Fetch New Data Issue

Hi,
I have 3 exchange accounts configured in my iPhone4 (iOS 4.2.1): 2 GMail accounts and 1 company account.
My goal would be to check every 15min the GMail accounts, and only manually the company account.
My configuration as follows:
Fetch New Data > Push > Off
Fetch New Data > Fetch > Every 15min
Fetch New Data > Advanced > GMail accounts > Select Schedule > Fetch
Fetch New Data > Advanced > Company account > Select Schedule > Manual
I rebooted iPhone many times, but every time the app checks for GMail accounts (mail app is NOT already running), it checks for Company account too (even if fetch is set to Manual for this account), and it shows me mail counter on app icon (before to open the app).
Shouldn't "Fetch New Data > Advanced" override "Fetch New Data > Fetch"?
Please tell me if I'm going wrong or if there's a solution for this issue.
Thanks a lot!

After some tests, the problem seems to occur only if there are some non-read messages in the company account, when mail app check for other accounts.
Any suggestions?
Thanks

Similar Messages

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Settings Mail Autocheck replaced by Settings Fetch New Data on 3g?

Hi, I was wondering if anyone can confirm that the 3g iPhone no longer has the "Auto-Check" function listed in Settings>Mail (above the Show, Preview etc fields; I don't see "Auto-Check" here like some user guides I have seen have indicated).
Assuming this isn't a problem with my phone, is this function now replaced by Settings>Fetch New Data? If I disable the Push function and set the Fetch to Manual, is this the equivalent of a Manual setting in the old "Auto-Check"?
I'm trying to set this up so I can resolve the mailbox conflicts I get between my iPhone mail and my MacBook Pro Mail app for two POP accounts (this has been discussed elsewhere; setting up my Pop accounts has been a nightmare!). Would opening an iPhone mailbox app automatically consitute a "manual" check?
Basically I just want to be able to have my iPhone on while I'm using my Macbook Pro Mail app.

Yes, "Fetch New Data" is auto-check in v2.0.x, as well as the place to turn Push email ON or OFF. Disabling Push and setting Fetch to Manual is the same as Manual - your email will only be checked when you launch the Mail app on the iPhone.

TS2621 settings will not allow me to click on email, it does not highlight email, account, or fetch new data

Please give me some assistance with a problem that we have encountered with our ipod touch. We have lost the camera app, and most of all we need to change the email address on the ipod touch but when I go to settings, the email account, add account, fetch New Data will not highlight to allow me to click on them to access them to change them.
I have forgotten the password on the ipod also, we set it when we first purchased it for my daughter and never used it again and we cannot remember for the life of us what that pass code is now.
Thank you very much for your time with this matter.
Catrina Hernandez
<Email Edited By Host>

Cat5214 wrote:
I have forgotten the password on the ipod ...
If you cannot remember the passcode, you will need to Restore the device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Individual settings under "Fetch New Data" not working

Hi.
I'm having problems getting the individual push/fetch/manual settings to work. Here's the scenario.
I have three mail accounts set up on my iPhone 3G. They are "MobileMe," "GMail" and "Work."
I go to "Settings" -> "Fetch New Data" and turn "Push" OFF. I then go to "Advanced" at the bottom and set "MobileMe (Mail)" to PUSH. I thought this would enable PUSH on my MobileMe account while keeping it disabled on the other accounts.
However, my iPhone still won't get new mail automatically.
What am I doing wrong?

One thing to try that might help.
If you turn push off in the fetch new data screen, then it is a global effect for all accounts.
In advanced is how you want the accounts to behave.
So, if you turn push off in the 1st screen, then go to advanced and set mobileme to push, push is still off until you go back to the first screen and turn it back on.
Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT2625
Hope this helps.

Mail not fetching new data every 15 with 3g turned off

I had to turn 3g off in order to improve my reception and battery life. It seems to help somewhat, however I notice that the Mail application does not fetch new mail every 15 minutes like its setup to do. It works fine in 3g mode, just doesnt do it while its on edge. (I think it also works ok on wifi.)

Perhaps your in an area with awesome 3g reception but really bad Edge. Weird huh.

On my iPod touch I can't get the fetch new data to open my e-mails, On my iPod touch I can't get the fetch new data to open my e-mails

iPod touch 4th generation

Has it ever worked? If it has worked and stopped could be a memory issue that would be fixed with a restart/reset? Is it hanging on one particular item?
http://support.apple.com/kb/HT1430

HT5858 In settings on my iphone 4 manage storage, anything to do with icloud, under accounts-icloud,gmail,add account,fetch new data is in gray and i cant access anything. Trying to upgrade to iso 7. Frustrated

Im not good with any of this so bare with me please. On my iphone 4 anything to do with ICloud to manage storage or under Accounts(icloud,gmail,add account,ferch neew data are all in gray and cant access. Even just under settings, icloud is in gray. Im trying to download ISO7. My phone has gotten exstreamly slow. So frustrated !!

Do you have any restrictions set in Settings > General > Restrictions?

Chart: New data suddenly not appearing

Hi
I have an Apex chart (Flash - 2D vertical bar) which summarises soume counts over each day.
Last 15 days, it worked fine. Suddenly it is not showing any new day's data!
The underlying SQL works fine (ie. fetches new data without issue) - only chart is not updating with new data.
I tried to increase width of the chart but still it not showing more than 15 bars.
Any solution?
Thanks
PS: I discovered that none of my Flash charts are showing more than 15 items on X axes!

Hi,
There is a Maximum Rows field on the Chart Series definition page that is set as 15 by default. If you change this it should help.
Jon.

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

Authorization Issue on creating New Data Source

Hi Experts,
   We met several issues after we upgrade one of our BW system from 3.5 to BI 7.0.
   We have a customized role for our BW developer which name is SYN:BC_USER_FOR_BWDEVELOPER. When we assign this role to the users, the users should have access to create new data source, create/change on ODS, infocube, infobjects,etc. The developers also need access transformation roles and BEX Web Templates.
   After we upgrade our BW system from 3.5 to BI7.0. All the access has been denied. Then I tried to added many authorization objects in the developer role, then the developer role can access all the data source except transformation rules.
The following is the authorization objects which I have added:
S_RS_BCS
S_RS_BITM
S_RS_COMP
S_RS_COMP1
S_RS_CTT
S_RS_ERPT
S_RS_HIER
S_RS_ICBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRUM
S_RS_THJT
S_RS_TOOLS
S_RS_UOM.
S_RS_DS
S_RS_ISNEW
S_RS_DTP
S_RS_TR
S_RS_PC
S_RS_OHDST
S_RS_DAS
S_RS_BTMP.
I am not sure whether there are any other authorization objects or sth should be added to the developer role, could you give me some suggestions?
Thanks,

When i execute create transformation rules with the account which already have bw_all role, the system shows you have no authorization.
The following is the error after i execute /nsu53:
Authorization check failed.
Authorization Obj. S_RS_TR Data Warehousing Workbench -Transformation
Object Class RS Business Information Warehouse
   Activity                                03
   Source                                 ZM_SUM
   Target                                   ZWHYTEST
   Subtype of the Source
   Subtype of the Target
   Type of Source                      ODSO
   Type of Target                       TRCS
-fran

Issue with DSO Table for New data

When I click on content of new data in the manage of this particular DSO it hangs forever. Also, when I go to se11 and give the related New Data table, it ahngs forever.
Anybody experienced this before or what would this issue be related to?
Thanks in advance

Ask your DBA to see if h/she is able to access the same table from the backend...
When does it hang ?
When displaying the table structure in SE11 or when going to the first selection screen from SE11 or afterwards..?

Processed cube sees no changes, but new data have been inserted..

Simple AdwWorks cube has time dimension with years range from 2000-th to 2007-th. Fact data exists for 2001-2006. 2000-th and 2007-th are empty. Ok.
I'm insert new data to source fact table for 2001-th and process the cube. All changes immediately reflect in measure value (it grows). But new data for 2000-th don't reflect in measure value growing . Nevertheless, during cube processing
SSAS sees new rows for both cases (the value grows), and sql profiler catches equal batches of commands for 2001-th and 2000-th. But measure value grows only for 2001-th.
I've clear mdx-script - it contains now only calculate command. Now there is:
a) select sum(measure value) on fact tables in source database reflect new rows for both cases
b) cube processing sees changes for both cases
c) mdx-script is clear (there are no scopes, witch can set measure value to null )
d) select [sales amount] for cube reflect this changes only for 2001-th, not for 2000-th
Any suggestions?
===========
One day later.. :)
The problem seems as resolved, but... I don't know: is it tech and/or logic feature or bug..
So, what is happened.. Simple mdx query:
select [sales amount] on 0,
[some date from 2000] on 1
from [cube]
gives null value for [sales amount], but for [some date from 2001] value is not empty. In database fact table both values (results of sum(salesamount) for both dates) are not empty. After research i found that there was one measure ([Temp]) in the [sales amount]
measure group for which MeasureExpression was set to [sales amount]*[average rate] ([average rate] - measure from [Fact Currency Rate] measure group). Fact table for [Fact Currency Rate] measure group didn't contain data for 2000-th. I've insert it and - vualya
- all work and for 2000-th now. Main question is: why ssas calculate MeasureExpression formulas for measures, which I'm not request in a query, and why ssas set requested by me value to null, if it does not depend from formula of MeasureExpression property
of unrequested measure? Is it bug or "defense from fool"?. There is another sample of such strange ssas behaviour. I mean usage of UnaryOperatorColumn property. If it is set for any attribute of any dimension, then it influences on every query, even
if this attribute not is a part of this query. For example
select [sales amount] on 0
from [cube]
returns different results, which depends by setting of UnaryOperatorColumn for some dimension attribute.. What all it mean?

Hi Tkolomiewts,
I have the following questions, which will help me in better understanding of your issue :
1) Is [sales amount], a base measure or calculated measure?
2) Are you using the default Adventure works database?
Regarding
your other question about unaryoperatorcolumn for some dimension attribute affecting the results, lets use the following query that you mentioned:
select
[sales amount] on 0
from [cube]
This
query doesnt pick only the measure value, but also fetches the "All" attribute for the all the dimension attributes. Hence, if the UnaryOperatorColumn influences the All attribute's value, then it will affect the results of the query above.
Regards,
Muthukumaran

How to fetch the data from pl/sql table dynamically

Hi All, I have the requirement of comparing two db views data in pl/sql. So, I have bulk collect the view into pl/sql table. But, the issue is, It is expecting to provide the column name for comparison. But, in my case, column name is dynamic. So, i cannot provide the column name directly for comparison.
For eg: In my view t1_VW, i have 4 columns. stid, c1,c2,c3,c4 and similar structure for t2_vw
my code
TYPE v1_type IS TABLE OF t1_vw%ROWTYPE;
l_data v1_type;
TYPE v1_type1 IS TABLE OF t2_vw%ROWTYPE;
l_data1 v1_type1;
test varchar2(1000);
test1 varchar2(1000);
temp1 number;
begin
SELECT * Bulk collect into l_data
FROM T1_VW;
SELECT * Bulk collect into l_data1
FROM T2_VW;
select l_data(1).stid into temp1 from dual; -- It is working fine and gives me the value properly
-- But, in my case, we are reading the column names from array, i am constructing the query dynamically and execute it.
test :='select l_data(1).stid into temp1 from dual';
execute immediate test into temp1;
-- I am getting error as follows:
Error report:
ORA-00904: "L_DATA": invalid identifier
ORA-06512: at "SYSTEM.BULKCOMPARISON", line 93
ORA-06512: at line 2
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action
end;
- Please help me to get rid of this issue. Is it possible to construct the query dynamically and fetch the data?. If not, is there any other better approach to compare the data between two views?.

Output should display what are all columns changed and its old value and new value.
For eg., output should be
COLUMNNAME OLD_VALUE NEW_VALUE STID
C1 20 10 1
C2 50 40 2
C3 60 70 2
C2 80 90 3Why no do this only via a simple sql ?
create table a (STID number, C1 number, C2 number, C3 number);
insert into a values (1, 20, 30, 40)
insert into a values (2, 40, 50, 60);
insert into a values (3, 90, 80, 100);
create table b as select *
from a where 1 = 0;
insert into b values (1, 10, 30, 40)
insert into b values (2, 40, 40, 70);
insert into b values (3, 90, 90, 100);
commit;And now you can issue such a kind of select
SELECT stid , c1, c2, c3
   FROM
( SELECT a.*,
         1 src1,
         to_number(null) src2
   FROM a
   UNION ALL
   SELECT b.*,
         to_number(null) src1,
         2 src2
    FROM b
   GROUP BY stid , c1, c2, c3
   HAVING count(src1) <> count(src2)
   order by stid;I would then create a new table a_b_difference having the same structure as a or b and insert into it like this
create table a_b_diff as select * from a where 1 = 0;
insert into a_b_diff
SELECT stid , c1, c2, c3
   FROM
( SELECT a.*,
         1 src1,
         to_number(null) src2
   FROM a
   UNION ALL
   SELECT b.*,
         to_number(null) src1,
         2 src2
    FROM b
   GROUP BY stid , c1, c2, c3
   HAVING count(src1) <> count(src2)
   order by stid
   ;Then each time there is a difference between a column in a and its equivalente one in b (per unique stid ) a record will be inserted in this table.
You can do more by adding the name of the table in front of each record in this table to see exactly where the data comes from
Best Regards
Mohamed Houri

Infoset data issues need help ASAP

Hello BW experts,
I have created an InfoSet, to read data from one Single ODS. The ODS has already data active, but the Query on infoset doesnt returns any data.also i checked in listcube `without any success.
Could you please advise me where it might be wrong. i didn't changed anything in infoset. Just created a Infoset on top of ODS.
I tried all the options and made sure that it's not authorization issue.i deleted the ods data and loaded some test data and tried to create a query on ods it's fetching the data but no data pulling by infoset.
something wrong inbetween infoset and ods. could you please advise me what might be wrong and how can i resolve.
might be some issues with the generated program or some issue with the database level.
some of the infosets i created fectching partial data , some are getting full data from ODS and some of the infosets not at all picking the data. Overall i have created about 80 Infosets.
We are in BW 3.5. Recently upgraded the patch successfully.
Looking forward for your precious advise.
Thanks,
Naveen Reddy

just tried to go through it again, and it was close to finishing, less than a 1/2 hour left. and it got the error: "the installer is experiencing errors installing onto "Macintosh HD". The disk may be damaged, please try installing on another disk."
does that mean i'm going to have to buy a new internal hard-drive? once again any advice will be really helpful. Thanks
p.s. I also went and verified the disk again and it said there wasn't any issues with it. and i repaired it anyways and it said it was fine. This is super annoying
Message was edited by: Doonyal

Fetch New Data Issue

Similar Messages

Maybe you are looking for