Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Similar Messages

OEM showing 3 entries for one host

I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.

[email protected] wrote:
I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.3 entries for one host? What have you configured, Database Console or Grid Console?
HTH
Aman....

Two renewal orders and charges showing every month for one account and same renewal package, WHY

Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

Hello and welcome to the Skype Community.
The duplicate charge has been reversed and the funds will be returned to you.

Payments are going in two separate for one account

The payment for vendors in Payment Proposal (F110) are going in two separate transactions for once account.
Say for vendor 1011274 the payment amount should be 741 whereas the payment is going in two separate transactions (two payment documents) of 135 & 606.
Can you please let me know what could be the reason for this.
Rg
vk

Hi Vijay Kumar,
You are correct that for all the invoices due in one currency for a particular vendor there should be one payment but that is possible only for the invoices which are not over due.
In case of instalment payment or over due invoices for every over due invoice there has to be a separate payment. Please check if the invoices of same vendor has different due dates.
Please let me know if you still have any doubt.
Regards
Bharat

Settings Mail Autocheck replaced by Settings Fetch New Data on 3g?

Hi, I was wondering if anyone can confirm that the 3g iPhone no longer has the "Auto-Check" function listed in Settings>Mail (above the Show, Preview etc fields; I don't see "Auto-Check" here like some user guides I have seen have indicated).
Assuming this isn't a problem with my phone, is this function now replaced by Settings>Fetch New Data? If I disable the Push function and set the Fetch to Manual, is this the equivalent of a Manual setting in the old "Auto-Check"?
I'm trying to set this up so I can resolve the mailbox conflicts I get between my iPhone mail and my MacBook Pro Mail app for two POP accounts (this has been discussed elsewhere; setting up my Pop accounts has been a nightmare!). Would opening an iPhone mailbox app automatically consitute a "manual" check?
Basically I just want to be able to have my iPhone on while I'm using my Macbook Pro Mail app.

Yes, "Fetch New Data" is auto-check in v2.0.x, as well as the place to turn Push email ON or OFF. Disabling Push and setting Fetch to Manual is the same as Manual - your email will only be checked when you launch the Mail app on the iPhone.

Fetch the data from two tables

hell all
i want to fetch the data from two tables, one is from internal table and another one is data base table. what syntax i have to use either FOR ALL ENTRIES or INNER JOIN?

hi
Use FOR ALL ENTRIES.
see the sample code
select * into table tvbrk from vbrk
                            where fkart in ('F2', 'F3', 'RE',
                                       'ZVEC' , 'ZVEM' , 'ZVED',
                                       'S1')
                            and erdat in so_erdat
                            and kunag in s_kunag.
                                  erdat in so_erdat
                           and   fkart in ('F2', 'F3', 'RE',
                                             'ZVEC' , 'ZVEM').
if not tvbrk is initial.
    select * into table t_zregion from zregion
                  for all entries in tvbrk
                   where country = tvbrk-land1
                   and   region = s_regio.
endif.
thanks
sitaram

Two entries for each archive log in v$archived_log

Hi,
I have noticied that there are two entries for each archive log. Why this is so...?
I have fired following command.
==================
set pages 300
set lines 120
ALTER SESSION SET nls_date_format='DD-MON-YYYY HH24:MI:SS';
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
==================
output is as follows.
==================
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
==================
Regards
DBA.

I have noticied that there are two entries for each archive log. Why this is so...?Mseberg already mentioned.. little in detail as below
Check for the name column in v$archived_log,
One location refers to Local destination LOG_ARCHIVE_DEST_1
Other location refers to your standby/DR location, But it will shows you only service name instead of full archive name.
select dest_id,name from v$archived_log where name is not null and completion_time like '%24%FEB%'
   DEST_ID NAME
         1 +ORAARCHIVE/prod1/archivelogs/arch_0001_0671689302_0000240097.arc
         2 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=sldb1srv)(POR
           T=9101)))(CONNECT_DATA=(SERVICE_NAME=prod_sldb1srv_XPT)(INSTANCE_N
           AME=prod1)(SERVER=dedicated)))Edited by: CKPT on Feb 24, 2012 8:26 PM

Fetch New Data Issue

Hi,
I have 3 exchange accounts configured in my iPhone4 (iOS 4.2.1): 2 GMail accounts and 1 company account.
My goal would be to check every 15min the GMail accounts, and only manually the company account.
My configuration as follows:
Fetch New Data > Push > Off
Fetch New Data > Fetch > Every 15min
Fetch New Data > Advanced > GMail accounts > Select Schedule > Fetch
Fetch New Data > Advanced > Company account > Select Schedule > Manual
I rebooted iPhone many times, but every time the app checks for GMail accounts (mail app is NOT already running), it checks for Company account too (even if fetch is set to Manual for this account), and it shows me mail counter on app icon (before to open the app).
Shouldn't "Fetch New Data > Advanced" override "Fetch New Data > Fetch"?
Please tell me if I'm going wrong or if there's a solution for this issue.
Thanks a lot!

After some tests, the problem seems to occur only if there are some non-read messages in the company account, when mail app check for other accounts.
Any suggestions?
Thanks

Individual settings under "Fetch New Data" not working

Hi.
I'm having problems getting the individual push/fetch/manual settings to work. Here's the scenario.
I have three mail accounts set up on my iPhone 3G. They are "MobileMe," "GMail" and "Work."
I go to "Settings" -> "Fetch New Data" and turn "Push" OFF. I then go to "Advanced" at the bottom and set "MobileMe (Mail)" to PUSH. I thought this would enable PUSH on my MobileMe account while keeping it disabled on the other accounts.
However, my iPhone still won't get new mail automatically.
What am I doing wrong?

One thing to try that might help.
If you turn push off in the fetch new data screen, then it is a global effect for all accounts.
In advanced is how you want the accounts to behave.
So, if you turn push off in the 1st screen, then go to advanced and set mobileme to push, push is still off until you go back to the first screen and turn it back on.
Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT2625
Hope this helps.

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Two address for one company code

Hi SAPians,
I have a doubt in maintaining company address for Invoice output!
Is it possible to maintain two Address for one company code?
Like if XYZ company code and say it has has two customers AB and CD.
Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
If yes, please through light on it.
Regards,
Romesh

Hi ,
As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
Hope it helps.
Thanks and Regards
Rohit.

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

TS2621 settings will not allow me to click on email, it does not highlight email, account, or fetch new data

Please give me some assistance with a problem that we have encountered with our ipod touch. We have lost the camera app, and most of all we need to change the email address on the ipod touch but when I go to settings, the email account, add account, fetch New Data will not highlight to allow me to click on them to access them to change them.
I have forgotten the password on the ipod also, we set it when we first purchased it for my daughter and never used it again and we cannot remember for the life of us what that pass code is now.
Thank you very much for your time with this matter.
Catrina Hernandez
<Email Edited By Host>

Cat5214 wrote:
I have forgotten the password on the ipod ...
If you cannot remember the passcode, you will need to Restore the device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Getting data of two columns in one column

Hi,
I need to show data of two columns in one column, I also want to insert space between the data of both the columns in the output
can i use something like this ?
(IMPORTER_NAME+' '+IMPORTER_ADDRESS) as "Location"

872435 wrote:
Hi,
I need to show data of two columns in one column, I also want to insert space between the data of both the columns in the output
can i use something like this ?
(IMPORTER_NAME+' '+IMPORTER_ADDRESS) as "Location"You can either use the CONCAT function or || -
SQL> select 'Hello'||' '||'World', CONCAT(CONCAT('Hello',' '),'World') from dual;
'HELLO'||'' CONCAT(CONC
Hello World Hello WorldHTH
David

Fetch New Data shows two entries for one account

Similar Messages

Maybe you are looking for