Fetching a value of Input field

Hi frnds,
I have a pop up were in i am having a input filed and a link for downloading a file. There is a suply function linked to the file and i want to acces the data of the input filed inside that suply function. How is it posible. I have tried by just calling get attributes but its not returning me the value.
Pls help.
thanks
ROhit

Hi folks ,
The issue is solved. I had to hit enter before presing on the download button.
Thanks
Rohit

Similar Messages

Not allows to assign default value to input field using values in datastore

Hi Masters,
Consider that I have one input field in a form. I should assign default value to it. I should assign to it, the value which i have stored in a datastore. When i run the application, if i give default value as 123 ,then it is working fine i.e., it is showing 123 in the textfield in form , but if i give the default value as STORE@ProductId, then it is not displaying that value in the form.
Please help me out.
Thanks & Regards,
Kaushik Sreeram

Hi,
i faced this problem and here's what i concluded:
There's no way you can set default value for input field dynamicly, since the default value of input control is caculated only once (i think on initializing of the iView). The input control and the data store are initialized at the same time, STORE@productID is empty that time...
If you don't need to recieve value through the input field you're trying to initialize, but just to display the value from the store - I suggest you try using another control - Expression Box. It's value is calculated continiously, just like the Label's, and you can refere to it later.
Regards,
Yulia

How to set default value to input field dynamically

Hello Experts,
I am using adobe forms inside Webdynpro Java.
Adobe form is having few input fields where at run time i want to assign default value to those fields.
How can i do it ?
Thanks in advance,
Vinay
Edited by: VINAY on Feb 24, 2011 6:39 AM

Hi Mate,
Just set the value to the webdynpro context fields on view init.
if its like that will override the values entered by use on the form.
just check if the default value is equall to the field value if yes leave it, if not dont touch that field.
does this make sense...?
Cheers,
Sai

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Not getting field value in Input field of field exit

Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
Deepak

Use this statement in source code.
output = input.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR not input value in input field

Dear All,
I make search help for field ARBPL in selection screen are not excepted selected value.
Code is
SELECT-OPTIONS: p_arbpl FOR zdmde-arbpl MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = 'P_ARBPL'
     DYNPROFIELD            = 'P_ARBPL'
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = sh_arbpl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-high.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = 'P_ARBPL'
     DYNPROFIELD            = 'P_ARBPL'
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = sh_arbpl.
Please tell how to input selected field from search help into input field in both low and high.
Would appreciate your reply .
Regards,
Pooja

Hi Pooja,
For getting the response back from the user selection , please get the return code too. Before that instead of directly using the table crhd structure.. please do create a type declaration of that table , make sure that the field that you wanted to get using search help be specified at last of declaration type like this
TYPES: BEGIN OF ty,
   OBJTY TYPE CR_OBJTY,
        ARBPL TYPE ARBPL,
END OF ty.
this is because the return parameter t_rtn will holds the last value of type which been selected by user.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD               = 'P_ARBPL'
      DYNPROFIELD            = 'P_ARBPL'
      VALUE_ORG              = 'S'
    TABLES
      VALUE_TAB              = sh_arbpl
      return_tab             = t_rtn.
LOOP AT t_rtn INTO x_rtn .
   ENDLOOP.
try executing this code.
TABLES crhd.
TYPES: BEGIN OF ty,
   OBJTY TYPE CR_OBJTY,
        ARBPL TYPE ARBPL,
   END OF ty.
DATA: sh_arbpl TYPE TABLE OF ty.
       DATA: dynpfields TYPE TABLE OF DYNPREAD,
x_dynpfields TYPE dynpread,
t_rtn TYPE STANDARD TABLE OF DDSHRETVAL ,
x_rtn TYPE DDSHRETVAL.
SELECT-OPTIONS: p_arbpl FOR crhd-ARBPL MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl WHERE werks eq '1000'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD               = 'P_ARBPL'
      DYNPROFIELD            = 'P_ARBPL'
      VALUE_ORG              = 'S'
    TABLES
      VALUE_TAB              = sh_arbpl
      return_tab             = t_rtn.
LOOP AT t_rtn INTO x_rtn .
   ENDLOOP.
x_dynpfields-fieldname = 'P_ARBPL-LOW' .
   x_dynpfields-fieldvalue = x_rtn-fieldval.
   APPEND x_dynpfields TO dynpfields.
   CALL FUNCTION 'DYNP_VALUES_UPDATE'
     EXPORTING
       dyname                     = sy-cprog
       dynumb                     = sy-dynnr
     TABLES
       dynpfields                 = dynpfields
*   EXCEPTIONS
*     INVALID_ABAPWORKAREA       = 1
*     INVALID_DYNPROFIELD        = 2
*     INVALID_DYNPRONAME         = 3
*     INVALID_DYNPRONUMMER       = 4
*     INVALID_REQUEST            = 5
*     NO_FIELDDESCRIPTION        = 6
*     UNDEFIND_ERROR             = 7
*     OTHERS                     = 8
Regards,
Sivaganesh

Value in input field of Hier.Node variable displays tech.name of the IO

Dear all,
we are facing an issue with Hierarchy node variable(auth.) in the selection screen of webReports.
After selecting a hierarchy node value,it is displayed along with + sign and tech.name of the Infobject in input field .
example: lets say we have Country Hierarchy and i have selected Country group 'NAM' node..This is displayed as "+NAM(ZCOUTRYGRP)". where ZCOUTRYGRP is tech.name of the InfoObject Country group.
Expected value is just "NAM" which is Key .Does anyone have solution for this? This Problem occuers when we select Level 01 value of hierarchy and we do have hierarchy node values from same INfoObject.
Regards,
Murali.
Edited by: Muralidhar c on Aug 1, 2009 1:24 PM
Edited by: Muralidhar c on Aug 3, 2009 10:40 AM

it works as designed.found in sap help.

How to Fill value in Input fields before displaying ADOBE FORM

Hi to all,
Please can anyone tell me how to fill the entry in ADOBE FORM before displaying?
I have written a program to generate ADOBE FORM, but I need while displaying ADOBE FROM some input field should already be filled by value and can not be changed.
Please can anyone tell me how to do that in program?
Below is the program.
DATA: fm_name           TYPE rs38l_fnam,
        fp_docparams      TYPE sfpdocparams,
        fp_outputparams   TYPE sfpoutputparams.
Parameters: p_pdf_form_name type fname.
fp_docparams-langu   = 'E'.
fp_docparams-country = 'IN'.
fp_outputparams-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = p_pdf_form_name
    IMPORTING
      e_funcname = fm_name.
E_INTERFACE_TYPE           = E_INTERFACE_TYPE
CALL FUNCTION fm_name
    EXPORTING
      /1bcdwb/docparams        = fp_docparams
IMPORTING
    /1BCDWB/FORMOUTPUT       = fp_outputparams
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error           = 3.
CALL FUNCTION 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error        = 3
      OTHERS               = 4.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Jul 25, 2011 2:57 PM

Hello,
you need to provide the information via the interface, which you create for the Adobe form.
And then pass this values via the following function module inside your generation report.
CALL FUNCTION fm_name
check standard report : FP_EXAMPLE_01 as an example!

How to compare value in input field to value in database?

Hi all. I need to clear up if the value in the input field (e.g. input_field) is equal to at least one record in the field (e.g. name) in database table (e.g. customers), or not. The code should be like this:
IF...
message001. "(there's such a record in database)
ELSEIF...
message002. "(there's no such record in database)
ENDIF.
thanks all.

Hi,
I think u r asking about validating the selction screen and displaying a mess if that input is not in the DB right?
AT SELECTION-SCREEN ON s_matnr.
*Validate material no details
PERFORM validate_matno.
FORM validate_matno.
SELECT SINGLE matnr INTO v_matnr
 FROM mara
 WHERE matnr IN s_matnr.
IF sy-subrc NE 0.
 MESSAGE i128.
 LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.
Make sure that u are validating against the header table.
say eg if u wnat t validate matnr in marc, then do as below.
SELECT-OPTIONS: s_matnr FOR marc-matnr. "Material No
AT SELECTION-SCREEN ON s_matnr.
*Validate material no details
PERFORM validate_matno.
FORM validate_matno.
DATA: v_matnr LIEK mara-matnr.
SELECT SINGLE matnr INTO v_matnr
 FROM mara
 WHERE matnr IN s_matnr.
IF sy-subrc NE 0.
 MESSAGE i128.
 LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.
Dont select from marc.
Hope this is clear.

F4 help in dropdownlistbox and values in input fields

I need a F4 help in dropdown list box. Actually i have 2 more input fields alongwith one dropwdown list box. As per my problem
if i select one value from F4 help then corresponding other values should bepopulated into input fields. For example in F4 help
of dropdown box i am getting single selection containg three values "15 LIMAPLANT 45802" after selecting it the "15" should
be only input entry to dropdownlist box, values "LIMA PLANT" and "45802" should be input entry to other two input fields.

Look at the below code:
Oncreate:
 entry-name = '15'. entry-value = '15'. APPEND entry TO itab.
 entry-name = 'LIMAPLANT'. entry-value = 'LIMAPLANT'. APPEND entry TO itab.
 entry-name = '45802'. entry-value = '45802'. APPEND entry TO itab.
Layout:
 <htmlb:dropdownListBox id = "myid"
 nameOfKeyColumn = "NAME"
 nameOfValueColumn = "VALUE"
 onSelect = "myclick"
 selection = "<%= v_selected %>"
 table = "<%= itab %>" />
 <htmlb:inputField id = "myinp1"
 value = "<%= v_field1 %>" />
 <htmlb:inputField id = "myinp2"
 value = "<%= v_field2 %>" />
Page attribute:
entry TYPE IHTTPNVP
itab TYPE TIHTTPNVP
To capture the event:
OnInputprocessing:
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->id = 'myclick'.
CALL METHOD request->get_form_field
 EXPORTING
 name = 'myid'
 RECEIVING
 value = v_selected.
clear: v_field1, v_field2.
Loop at itab into entry where name NE v_selected.
if v_field1 is initial.
v_field1 = entry-value.
else.
v_field2 = entry-value.
endif.
endloop.
endif.
This will solve your problem..
* Reward each useful answer
Raja T

User can not enter value in INPUT field.

hi experts,
i have a table control on the screen which have one input field which user needs to fill. But as per he business req. we don't want him to enter any value, values should be enter from the search help only.
If i make input field Read only it comes in gray color and user get confused. tell me some way so i can create white input field in which user can not enter values from key board.
Please suggest...
points will be awarded...

>
ashish gupta wrote:
> hi experts,
>
> i have a table control on the screen which have one input field which user needs to fill. But as per he business req. we don't want him to enter any value, values should be enter from the search help only.
>
>
> If i make input field Read only it comes in gray color and user get confused. tell me some way so i can create white input field in which user can not enter values from key board.
>
>
> Please suggest...
>
> points will be awarded...
This you cannot control. because if it is enabled only in that case you can see it white.
do that thing as suggested by basakar to add a new input field just besides first one with zero padding.
One workaround is use an image instead of real input field. the image should have the input field as image.
and besides it create the input field with width 0 and padding also zero.
i think this can fulfill the requirement.
Thanks
sarbjeet singh

Changing value of input field in interactive report

Hi all,
I have created interactive report. On 3rd list, i had calculated total for netwr filed and it is displayed at bottom.
netwr field on list is editable. If value in netwr changed by user , value for total should be changed on same list.
Can anybody help me out?
Thanks and Regards,
Rakesh.

Hi Rakesh
Within the third alv's usercommand, Try this code.
FORM user_command1 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
 CASE r_ucomm.
 WHEN 'EDIT'.
 <code>
 CALL METHOD <alv_instance>->refresh_table_display
 EXPORTING
 is_stable = <third_alv_internal_table>
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
ENDCASE.
ENDFORM.
This will refresh the internal table each item a edit operation is done, after this write the code to find the sum.
Thanks and Regards,
Rinzy Deena Mathews

How to get the latest screen value (of input field in VA01)

Hi Experts,
I have a problem that when I am in VA01 (create sales orders) I see the (old) default value of the Req.Deliv.Date
(in Item Overview tab). I don't see the latest entered value.
This is screen field RV45A-KETDAT.
Eg When I enter VA01, I first enter the order type.
In the next screen you will see that the Req.Deliv.Date has already an intial value (current date).
Now when I change this field to Nov 14 2011, I will still see the delault current date (in PAI).
Only much later, the program will adopt the new value (but this is too late for me).
(I actually need the value in FM SD_PARTNER_ABLAD_SELECTION)
How come and how can I retrieve the latest value?
(I already tried FM DYNP_VALUES_READ but this didn't help)
Please advice.
Thanks very much!
Guido

Did you try DYNP_VALUES_READ like this
      PERFORM DYNP_VALUES_READ USING 'SAPMV45A'
                               '4001'
                                'RV45A-KETDAT'
                       CHANGING RV45A-KETDAT
                                SY-SUBRC.
try writing this where you need your values. This oerform already exists in VA01 code and is used in teh PAi for another field. So just try callign this with these values and see if it helps.

Dynamic selection screen fetching the value from table fields

hi gurus,
i have one table say ztable...and i should create a dynamic selection screen which should populate the selection screen by the table field names.
example..if i have 3 fields im my table..my selection screen should have three selection option fields..and in future if i add one more field in my table it should automatically create another slection-option in selection screen..
thanks
Sudheer

Do you mean like SE16 works. If so, you should notice that if you amend the selection fields, the screen program is actually re-generated.
That is what is happening. A program is being created and re-generated.
To create a dynamic selection screen in a single program is not possible ( I may be wrong ). If it is possible, then you would have problems in defining selection screen field names and using them.

Get the the value in input field based upon the fast input field

Hello Experts,
i am new to webdunpro abap.
i have a small doubt in webdynpro.
isuue:- i have two input filed one is for " MATNR" and second input filed " Material Description"
I have to chhose the MATNR by pressing f4 (it is standard search help), it will come from MARA table.
Once it is filled the second inputfiled shoul filled automaticaly base upon the MATNR with readonly mode.
Could any body send me the the splutin or any sample code for this
Thanks in adv!!!

Hi Rakesh,
                You can Use OVS help to get your requirement done.
                Follow the link to know how to use OVS in WDA
                link : [http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm]

Fetching a value of Input field

Similar Messages

Maybe you are looking for