Fetching Data from SAP ECC to BODS 4.0

HI,
I am trying to fetch tables like LFA1 and ADRC into BODS from ECC. I am able to connect to the ECC system from BODS.
In Data services Designer I go to Datastore and add a new datastore as SAP Applications.
I am able to connect to ECC using this. After that when I select the datastore and select import by name i get the following error
Data Services Designer
Error: Cannot import the metadata table <name=LFA1>.
RFC CallReceive error <Function Z_AW_RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_MESSAGE- SAP System has status 'not modifiable'[SAP NWRFC 711][SAP Partner 701 ][PET][hicgudb3][BOBJDS][4102]>. (BODI-1112339)
OK
Can you please help me in resolving this.
What kind of access does the user need to have for fetching data from ECC using BODS
Thanks in advance.
Regards
Sudip.

Please refer to the [documentation|http://help.sap.com/businessobject/product_guides/boexir4/en/sbo401_ds_sap_en.pdf] that discusses that in quite a lot of detail.

Similar Messages

Webservice:get data from SAP ECC

hi,
i want webservice.that webservice will fetch the data from sap ecc system.
i need steps for creating webservice.i have some functionality .what can i expose as webservice.
thanks
raj

Hi Raj,
If we trying to fetch data from SAP ECC system then expsoing as a web service from NWDS (Netweaver Developer studio ) would the best option.First we need to create a Portal Service that invokes the functionalities of the SAP application component( Business solution which uses ECC) using the SAP Java Connector. Then you can create a Web Service from the Portal Service.
If your SAP application component runs on SAP Web Application Server (WebAS) 6.20 or later, then you can directly enable Web Services on the application component by using the application server's native Web Service capabilities.
1. To turn on the WebAS 6.20 SOAP Processor, you need to:
Configure the Internet Communication Framework (ICF) of the WebAS to start the Internet Communication Manager (ICM) and activate the HTTP protocol support
Use transaction SICF to activate the SOAP Runtime Handler: default_host -> sap -> bc -> soap -> rfc.
Once the SOAP Processor is turned on, the RFM-implemented Web Services can be invoked at http://<host_name>:<port_number>/sap/bc/soap/rfc
6.20 also provides a Web Service Browser, which is a BSP web application that can be used to browse all RFM-implemented Web Services in the system, and generate WSDLs for these Web Services.
2. In a WebAS 6.40-based SAP application component, such as SAP Enterprise Core Component (ECC) 5.0, or a WebAS 7.0-based application component, such as ECC 6.0, by default, few Web Services are pre-delivered by SAP. But it is pretty easy to create Web Services in a WebAS 6.40-based system.
Inside-Out Approach: if within the SAP application component there already exist one or several RFMs or BAPIs that suit your needs, you can create Web Services based on them without any additional programming. The basic steps include:
Using the Service Definition Wizard, which can be started from transaction SE80, SE37, or BAPI, to create a (Web) service definition from an RFM, a function group, or a BAPI.
When creating the service, you have the option to rename or hide operations (methods) and parameters, define default values for parameters, and changing parameter types.
After the service definition is created, you need to use transaction WSCONFIG to release the service definition for the SOAP runtime.
Afterwards, by using transaction WSADMIN, you can for any released Web Service, call the Web service homepage which provides utilities for using and testing the Web Service, generate WDSL, configure the logging and tracing settings, and publish the Web Service as a Business Service in an UDDI registry.
Hope these steps are helful to you.
Regards,
Shaila

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Transfer of data from SAP ECC 6.0 to E-Recruitment

Hi,
We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
IT0002 Personal Data to 5102 Candidate Information
IT0006 Address Data to 5110 Address Rule
IT0105 Communication Data to 5110 Address Rule
IT0022 - Education to 5104 - Education
IT0023 Others/Previous Employers to 5103 - Work Experience
IT0024 - Qualifications to 5105 - Qualifications
Regards,
Somi .

Hello,
in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
Check SLG1 - application log for entries.
did you the initial data upload or did you only transfer changes?
If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
Best regards
Roman Weise

Loadind transaction data from SAP ECC 6.0 system failed

Hi!
I have SAP ECC 6.0 IDES system with the following clients:
100 DEV client
200 BI client of SAP 6.0
Now I would like to load the transaction data from InfoSources 0FI_AR_6 and 0FI_AR_4 from SAP ECC client 100.
The extraction process has been frozen in status "yellow" and after a while changed the status to "red" with the following information
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
The users BWREMOTE and ALEREMOTE seems to be ok and have the suitable authorization.
The tcode SM58 does not show any entries.
The tcode BD87 shows that the IDocs was sent (source system) and has been received on target system.
Question:
How can I solve my problem? Please give me some technical information (tcode, report).
Thank you very much!
regards

Walk through your basis set up and check out
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
pts appreciated.

Loadind data from SAP ECC 6.0 system

Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
the status is getting u201Cyellowu201D (194 from 0 records)
at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Thank you very much!
regards

Jgen,
check the t-code BD87 in BW and see if there is any IDOC pending...try to manually execute them.
Its a connection issues as the IDOC's are not getting exchanged between the system.
may be you are running out of processes and your job is just waiting.
check the partner files as well in WE20 and see if everything is OK.
take the help of your SAP basis team as well.
Also check whether user ALEREMOTE exists in the source system in R/3 and give him all the authorization.
check if the authorization objects like S_RFC and B_ALE_REC are assigned to its role.
Also check if the authorization profile is S_BI-WX_RFC.
check this thread and check the ALEREMOTE part.
http://help.sap.com/erp2005_ehp_04/helpdata/DE/ab/4c69f832429f419fa6f216c83dccb0/content.htm
Ajeet

Loading data from SAP ECC to DS---Error

Hi all,
I am using Abap dataflow for loading data from a table in SAP Application to oracle database. I am getting an error during execution as follows.
I am using direct download method for transfer of data.need your valuable inputs.

Hi phaneendranadh kandula,
Direct Download Method: It will directly transfer the data from SAP Application Server to Client Download Directory.
Note: It is not recommended because we cannot schedule job and not recommended for large amount of data.
Data Transfer Methods.
Data Services with SAP Direct Download Data Transfer Method
Not Recommended
We cannot Schedule
Not recommended for Large Amount of Data
Data Services with SAP Shared Directory Data Transfer Method
Recommended
Secure Method
Can Handel Large amount of data
can be executed in Background method
Data Services with SAP FTP Data Transfer Method
Recommended
Secure Method
Applicable in Multiple OS Environment
Data Services with SAP Custom Transfer Method
Recommended
Highly Secure

Fetch data from SAP Standard Reports

Hi,
I want to fetch the data of internal Table from SAP-Standard Reports. After than I can use in different report of these data. So Please guide me how to do this. How to fetch the data for use in different programs at run time of new object.
Thanks !
Ram Shanker
Edited by: Ram Shanker on Feb 7, 2012 6:02 PM

YOU WANT LIKE THIS
SELECT VBELN FKART FKDAT KUNAG FROM VBRK CLIENT SPECIFIED INTO TABLE IT_VBRK
    WHERE MANDT = SY-MANDT AND FKDAT IN SO_YEAR
    AND FKART IN SO_TYPE
    AND BUKRS IN SO_BUKRS
    AND KUNAG IN SO_KUNAG.
*********Selection from Billing Document: Item Data ******
IF IT_VBRK[] IS NOT INITIAL.
    SELECT VBELN POSNR FKIMG AUBEL AUPOS MATNR INTO TABLE IT_VBRP
      FROM VBRP CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRK
      WHERE MANDT = SY-MANDT AND VBELN = IT_VBRK-VBELN
      AND MATNR IN SO_MATNR.
********Selection from Material Descriptio*****
    IF IT_VBRP[] IS NOT INITIAL.
      SELECT MATNR MAKTX INTO TABLE IT_MAKT
        FROM MAKT CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRP
        WHERE MANDT = SY-MANDT AND MATNR = IT_VBRP-MATNR.
    ELSE.
      MESSAGE TEXT-005 TYPE TEXT-001.
      STOP.
    ENDIF.
ELSE.
    MESSAGE TEXT-005 TYPE TEXT-001.
    STOP.
ENDIF.
IF IT_VBRP[] IS NOT INITIAL.
*********Selection from Sales Document: Business Data ******
    SELECT VBELN POSNR KDKG1 INTO TABLE IT_VBKD
      FROM VBKD CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRP
      WHERE MANDT = SY-MANDT AND VBELN = IT_VBRP-AUBEL
      AND POSNR = IT_VBRP-POSNR
      AND KDKG1 IN SO_VTEXT.
    IF SY-SUBRC <> 0.
      IF SO_VTEXT IS NOT INITIAL.
        MESSAGE TEXT-028 TYPE TEXT-001.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
IF SO_VTEXT IS NOT INITIAL.
    SORT IT_VBKD BY VBELN POSNR.
    SORT IT_VBRP BY AUBEL POSNR.
    LOOP AT IT_VBKD INTO WA_VBKD.
***Selection to get warranty period
      SELECT SINGLE VTEXT FROM TVKGGT INTO WA_FINAL-VTEXT
      WHERE KDKGR = WA_VBKD-KDKG1
      AND SPRAS = 'EN'.
      READ TABLE IT_VBRP INTO WA_VBRP WITH KEY AUBEL = WA_VBKD-VBELN POSNR = WA_VBKD-POSNR.
      IF SY-SUBRC = 0.
        WA_FINAL-VBELN = WA_VBRP-VBELN.
        WA_FINAL-POSNR = WA_VBRP-POSNR.
        WA_FINAL-FKIMG = WA_VBRP-FKIMG.
        WA_FINAL-AUBEL = WA_VBRP-AUBEL.
        WA_FINAL-AUPOS = WA_VBRP-AUPOS.
        WA_FINAL-MATNR = WA_VBRP-MATNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
          EXPORTING
            INPUT = WA_FINAL-MATNR
          IMPORTING
            OUTPUT = WA_FINAL-MATNR.
      ENDIF.
      READ TABLE IT_VBRK INTO WA_VBRK WITH KEY VBELN = WA_VBRP-VBELN.
      IF SY-SUBRC = 0.
        WA_FINAL-FKART = WA_VBRK-FKART.
        WA_FINAL-FKDAT = WA_VBRK-FKDAT.
      ENDIF.
      READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_VBRP-MATNR.
      IF SY-SUBRC EQ 0.
        WA_FINAL-MAKTX = WA_MAKT-MAKTX.
      ENDIF.
***Selection to get sold to party
      SELECT SINGLE NAME1 FROM KNA1 INTO WA_FINAL-NAME1
      WHERE KUNNR = WA_VBRK-KUNAG.
      APPEND WA_FINAL TO IT_FINAL.
    ENDLOOP.

PowerPlant passive Oracle dblink to read data from SAP ECC?

Hello
We have a third party vendor named PowerPlant that is proposing to integrate with SAP ECC using a passive dblink to pull data into PowerPlant. This is proposed when SAP ECC is running on an Oracle database. Presumably this is a read-only connection to the SAP ECC Oracle database (at database level). Has anyone used this and/or have recommnedations for or against?
Thank you,
Harold

Hi Harold,
Technically it is possible but, check your Oracle license with the local SAP office. As far as I know that SAP is not permitted 3rd party connections to the database.
Best regards,
Orkun Gedik

Distributing customizing(control) data from SAP ECC to a non SAP System

Dear Experts,
I am currently working on an interface for distribution of different data to a non SAP System. One of these is customizing data (Company code, purchasing org. plant etc). The system expects a file and we shall implemet the following scenario: IDOC>XI>File
Questions:
1. Is it possible to use CONDAT Idoc to transfer customizing data to a non SAP System or is this only used for synchronisation of data between SAP Systems?
2.In case CONDAT cannot be used would you recommend creating a custom table, message type etc. for this case?
Please advise.
Thank you so much

Hi Narasimha,
We can do this with the help of PI. Please find the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404ee507-3fbc-2e10-00bc-be90ab28d036?QuickLink=index&overridelayout=true&52239687237174
Its from SAP PI to any other system.
Check this link too.. Proxy with Attachments.
Regards,
Siva

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

Data load from SAP ECC to SAP BI

Hello Gurus and Experts
I am new to BI and I m almost struggling to find a step by step process in loading data from SAP ECC to SAP BI through generic extractors from VBAK. The Problem is I can create an Infopackage for full update and loaded the records.(Lets say Upto this step 100 records are moved to PSA)
Then I create a sale order in ECC which is a new record that has to be transfered as delta record.
Now my questions are:
Am I correct if I moved the initial records into PSA with Full Mode InfoPackage?
Should I create another infopackage for delta records with Delta Mode or to change the update mode of the infopackage created earlier for Full Update mode?
Should I create a new infopackage every time to load the delta records?
Does separate DTP has to be created for Full and Delta updates?
Please dont be frustrated if my questions are pointless or childish
I would be glad if someone demonstrate the solutions in steps
Thanks in Advance
Karthik

Hi Ram,
I have followed all the steps mentioned by you, yet something is lagging in my end.
Let me lists the steps done by me and please correct me if i am wrong anywhere.
1. RSO2 in ECC..
2. Created DS with short, med and long names in SD application component for VBAK with all the fields unchecked in hide selection except document number, time of document, document date, net
value of the document and document currency.
3. mentioned a numeric pointer as Document number for delta and used new status for changed records.
3. saved the datasource. checked the newly created ds using the tcode RSA3.
4. Replicated the datasource under SD Application Component in BI and Activated it
6. Performed Transformations
7. created an Info Package with FULL UPDATE and executed. I got 6898 records in my PSA
6. Created DTP with DELTA. Saved and Executed it. Got 6898 records in my DSO
7. Created Info Package with INIT WITHOUT DATA TRANSFER and scheduled it.
8. Switched over to ECC and added a sale order
9. Created an InfoPackage with DELTA UPDATE and Scheduled it.
-----I didnt receive any records in my PSA
10. performed DTP.
---- I didnt received any new records in my DSO as my delta run is not working..
PS: I am using WO DSO
Please correct me if i am wrong anywhere
Thanks in advance
Karthik

Fetching Data from SAP ECC to BODS 4.0

Similar Messages

Maybe you are looking for