Fetching The more then One Company ID by using PLSQL Table on Block B1(FORM

I have two blocks in Form (Forms 10g) .On the Block B2 I have populated the Company Id by using the PLSQL Table.Now I selected more than two company ID from that Block ...I just want to keep the Company ID in the Temp Field on the Block B1.which I have selected on the Block B2.Any idea how can I assign more then one Company ID to That Temp Field on B1.

This doesn't appear to have any connection to JMS or indeed to Java. Wrong forum. Locking.

Similar Messages

  • More then one repositry could be used at same time?

    please anybody can told what we can use more then one repository at same time? as i have two reposities as sh,paint.what these two could be enable in nsq file .
    Edited by: shakeel khan on Jan 4, 2010 5:03 AM

    yes you can..
    check the following links
    http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/
    http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
    Regards,
    Raghu

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

  • How can I restrict more then one user to access the table?

    Hi !
    I have a problem and two solutions and I am a bit confused as to
    which one is the best one and/or can there be any better way of
    handling the problem ?
    Problem : I have to update a key field of a table when I update
    it in the form 5.0 screen. I am basically doing a maintenance of
    a table and if a certain field is updated then the change has to
    be reflected in two more tables. But the issue is that the field
    is a part of the key in those two tables. So all I can think of
    is that I need to insert new set or rows for that new value of
    the field and delete the old set of records for old values of
    the field.
    There are two ways of doing it;
    1.One option can be to explicitely define two cursors separately
    and fetch the values in them one by one and then insert the new
    records and then delete the old records in both the tables. This
    I feel will be a cumbersome process both in terms of processing
    time and the coding.
    2.Second option I was thinking can be to create two flat tables
    (without keys) and insert the values in them and update the
    changed field there and then insert the rows in the respective
    tables. Delete the old records in the main tables and delets the
    records in these flat tables. This is a bit more faster and
    easier to predict and code. This seems to be a better option for
    me.
    Any comments on these ?
    In both the cases I was thinking of making some provision so
    that more then one person can't update the table simultaneously.
    Since if there are more then one persons doing the processing
    then some inconsistency might creep into the whole process.
    This is easier to do in the second process as if I check the
    data in the flat tables and if there is some data then I can
    presume that some one is doing the processing and I can ask the
    other person to hold for a while. But in this case how can I
    stop more then two people to simultaneously check for the empty
    table and start inserting the record ?
    I was just thinking of having a sepatare table having only one
    field and this will be a key field and as the process begins the
    process will insert a fix value say 'Y' in the key field and at
    the end of the process the record will be deleted and this way
    we can restrict the user to access the process more then one at
    a time..? Since you can't have same value of the key in a table
    more then once.
    Any better way of handling it will be deeply appreciated.
    How about locking the table at the begining and releasing the
    lock at the end ? Will there be any issue in that? since I am
    inserting and deleting the rows in the same transaction.
    Comments welcome,
    Shobhit
    null

    How about performing the update IN the database using a stored
    procedure?
    By using non-database fields on your form to get the
    information, you can then call the procedure in the database to
    perform the updates. If an error occurs in the procedure you
    rollback, if necessary, and send a message or status back to the
    form. If it succeeds you might wish to commit and then re-
    execute the form's query -- using either the original key values
    or the new key values...
    null

  • SAP is allowing miro more then one time against the single GRN

    Hi All
    Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
    i want to ristrict his .
    can any body tell me the process
    Regards
    Prakash

    Hi,
    Option-1:Use T.Code:OMRM  & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error  [maintain GR-based IV in the PO item level ]
    Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

  • Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

    Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

    Yes. I have two different Bluetooth headsets and they are both paired to my iPhone so I can use either one but only one can be used at any one time.
    To pair the second one, simply repeat the pairing process that you used for the first one.

  • Can you have more then one iphone control the apple tv at the same time?

    Can you have more then one iphone4 as a remote for one apple tv at the same time?

    iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

  • How to call more then one Function modules at the same time

    HI ,
    How to call more then one FM at the same time .
    Modertor Message: Interview-type Questions are not allowed.
    Edited by: kishan P on Jan 2, 2012 2:22 PM

    They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
    Thanks

  • Can I connect more then one cDAQ-9188 in the same network?

    Hi, I have one question for you.
    Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
    thanks in advance for any response.

    You will need a network switch and make sure they are different IP Addresses, but same subnet.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

    I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

    Hi,
    Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
    iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
    For 3 and 4 way chats it needs 384kbps
    Set the Bandwidth to 500kbps if it is set lower.
    Also check the speed you are getting from your Internet supplier.
    9:28 PM      Thursday; February 23, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • MVC - More then one view managed by the same contrler.

    Ok, I have been reading and searching examples on the MVC .. but all the examples show just what to do when you have just one view of the model. What I f I have the more the n one view to handle the same model.
    As we know the views would need to be registerd inside the controler? How can I do this If I have more then one view?
    does anyone have any ideas!?
    Would it still be correct if when an action occures on my view instead of the controler capturing that event an handiling, I make my view call the controler to handle it?

    So in your opinion is it ok if I call my controler from the action event of my button?
    I just did a small example below:
    import java.awt.event.ActionEvent;
    import javax.swing.*;
    import java.awt.event.ActionListener;
    public class Starter extends JFrame{
         private Model myModel = new Model();
         private Controler myControler = new Controler(myModel);
         public Starter(){
              JButton myButton = new JButton("Test");
              myButton.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent e){
                        myControler.makeAction("Hello");
              this.getContentPane().add(myButton);
              this.pack();
              this.show();
         public static void main(String[] args){
              new Starter();
    }As you can see I am calling the controler to manage the new data from the action event of 'myButton' !
    Is the above code ok with the spirit of the MVC?

  • Object would have more then one attribute with the tag :VALUE

    I'm creating a new component in Ultiboard - a 100 pin connector.  This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
    When I change the VALUE or NUMBER attribute, I get the DRC error  message:
    This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
    Please remove one of the attributes and try again.
    Okay, so I've tried deleting the tag and now I can't name the pin at all. 
    What am I missing?

    You should be in the footprint editor to edit the pin name.  Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon.  In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.   
    Tien P.
    National Instruments

  • I have more then one apple ID's on my phone how do I remove one but keep the other?

    I need help, I have more then one apple ID on my iPhone 4, is there any way to delete one but keep the other?

    You can only be signed in to one Apple ID at a time.  Sign in to the one you want and ignore the other.

  • Hi gurus in scripts i want to display more then one main window on the page

    hi gurus in scripts i want to display more then one main window on the page how it is to follow any body explain to me plz.

    Hi all,
        I am printing check printing from F110 with Z-form and it has been assigne to FBZP also..
        My client need to print the check information twise that means main window data two times.
        like this: 
           First main window.  :      invice#       amt            amt
                                               9002          4000          4000
                                               9005          5000          4000
    Al so they want like to print same in down part of the main window.
           First main window.  :      invice#       amt            amt
                                               9002          4000          4000
                                               9005          5000          4000
    For this i  have created instance main window of main window like MAIN    01,  but it is not displaying the data in instnce window data
    in the instance main window. 
    Question: Could you please let me know abt the same or good solution. How to cal main window instance , i tried with  
    /:   NEW-WINDOW      in instance main window part but it also appering in main windoe also.
    could you please let me know how to call instance main window or any other solution to get teh data like my example above.
    thx

  • Display More then one column in to POP LIST OF VALUE Item

    Dear All,
    i want to display More then one column in to POP LIST OF VALUE Item like POINTNO,CITY_NAME,REGION_NAME,POSTEL_CODE .
    How can i display these 5 Column in to POP UP LIST OF VALUE Item.
    Thanks
    Vedant

    Hi,
    Here is my example how to get the address data from address book:
    on page, where is the IR report with many columns (as a popup page) there is a Column Link of URL type - you can choose any colulmn .
    In the URL address type: javascript:passBack('#ID#', '#NAME#', '#SURENAME#', '#COMPANY#', '#STREET#', '#CITY#', '#POSTAL_CODE#', '#STATE#' );self.close();
    self.close function close the popup after fetch.
    It will call a passBack function declared in page header.
    Example:
    <script language = "JavaScript">
    function passBack(v_addr_id, v_name, v_suren, v_comp, v_street, v_city, v_postal_code, v_state) {
    opener.document.getElementById('P2_ADDRESS_ID').value = v_addr_id;
    opener.document.getElementById('P2_ADR_NAME').value = v_name;
    opener.document.getElementById('P2_ADR_SURENAME').value = v_suren;
    opener.document.getElementById('P2_ADR_COMPANY').value = v_comp;
    opener.document.getElementById('P2_ADR_STREET').value = v_street;
    opener.document.getElementById('P2_ADR_CITY').value = v_city;
    opener.document.getElementById('P2_ADR_POSTAL_CODE').value = v_postal_code;
    opener.document.getElementById('P2_ADR_STATE').value = v_state;
    </script>
    If you want set only one value, just make a similar function with only one parameter.
    I hope it will help to you
    J

Maybe you are looking for