Few general questions

I was just wondering I downlaoded the mac version of msn and ClamxAv and both are on my desktop is there anyway to remove them from the desktop? also if anyone knows if it is possible to get photos off my ipod and put them onto my macbook thanx

I used to wonder about that myself, but when i use my ipod in disk mode its not possible to get the photos synced onto it through itunes. the only way to get anything in and out of the ipod is both through disk mode, and having the files saved to the ipod straight onto the drive as you would an external hard drive, not loaded through the itunes interface.

Similar Messages

A few general questions

Hi there everyone
I have a few questions i need a bit of help on
1. I came to the realization yesterday that my cpu was not running at the correct speed, since i am a little slow at times. It is a Athlon 2000+ 1.6 Ghz, but the cpu was running at 1.2, so I pushed up the fsb from 100 to 133...Now my temps are running 5-8c higher (idle 44-47c and to 49-53c at load playing Neverwinter Nights).
Is that normal?
2. I bought some extra fans to see if this cools the case better. I have now 2 in front (intake) , one in back (out), and one on the left side vent...Question is on that vent is it better to put that one as intake or outake? It is directly horizontal to my CPU (where I have a volcano 9 cpu cooler).
3. How often is it good to run the cooler xp on PC Alert? I was thinking I could run that quite often, especially when playing games cause it cuts the temp down to 28-30c!! Would that put too much stress on your fans? How often can I run that?
4. I have the kt4-ultra 6590, I installed the IDE3 drive as a 13 gig IBM deskstar, I have read up a lot on RAID, but I do not know what I do with this drive....None of the faqs really tell you, except a lot of technical jargon. My question is thus: May I use this drive to install applications and games? Or should it be left empty or for backup or performance write booster? I have two 40 gig seagates as primary and slave on IDE1 so i am not really hurting for space i was just wanting to know if this thing can be useful.
My Thanks to anyone who can answer these questions for me

Well, Allied PSU's were once considered to fairly good for most systems. These days, they really lack the power output needed by modern systems.
3.3v 24a +5v 35a +12v 0.8a Also, the 3.3V looks to be a little low, at 24A, and this could be the reason for the alarm by PC Alert. Gaming with a modern system will show any weakness in the PSU. You probably never had this happen before, due to the CPU drawing a little less power while running @100FSB.
Keep an eye on this, and if it continues, a new PSU should be considered, but remember that "400W" means very little when it comes to most PSU's. High amp ratings are what matter. Most people here agree that Antec and Enermax PSU's are among the best brands.

A few General Questions about Layouts

Hey.
I'm pretty new to Swing so I don't know much. My first question is do you have to use a Layout Manager to organize components on a JPanel? Is there no pixel way to do it? Secondly, for layouts, specifically for GridBagLayouts, is there any way to display the grid for developing purposes?
Thanks in advance.

I'm sorry but the above code did not work. Even though I added the components, they still did not show. Anything I missed? Thanks.
My code is below:
import javax.swing.*;
public class SwingTest {
    public static void main(String[] args) {
        // Create application frame.
        JFrame frame = new JFrame();
        frame.setSize(500,500);
        JPanel foo = new JPanel(null);
     This 1 arugment constructor takes the layout manager as the argument.
     You can alternatively do this:
     JPanel foo = new JPanel();
     foo.setLayout(null);
     JLabel label1 = new JLabel("Label 1");
     label1.setLocation(10, 10);
     JLabel label2 = new JLabel("Label 2");
     label2.setLocation(10, 50);
     foo.add(label1);
     foo.add(label2);
     frame.add(foo);
        // Show frame.
        frame.setVisible(true);
}

A few general questions about sequences, framerates (fps), audio sources

If I create a sequence in Pro that is 23.976fps, matching my audo from Canon T2i shot with 24fps... and an audio with 48hz... and then if I import an audio (music) with 44hz..
does it affect my output settings?
Another question. If i have 23.976fps sequence, and I output it for Vimeo (which they say should be 30fps) does it have ANY effect on video/audio synchronzation?

PrPro can handle most common Audio Sample Rates, like 44.1KHz @ 16-bit, and will Conform those Assets to edit in a 48KHz 16-bit Project. Other than an extra moment of the Conforming process, should not be an issue. This ARTICLE will give you some background on Conforming and Indexing.
Good luck,
Hunt

A few general questions from a greenhorn

Hello there,
I have a project coming up that will require the ability to
record live audio conversations. It sounds like I need FMS to
accomplish this, but which version? I'm hoping we can get by with
the $1500 version as this is the only functionality of FMS that I
will be utlilzing.
Nowthen, on to my extreme-newb questions:
If we are currently running the site with a php/mysql
backend, will FMS have the ability to just "ride on top" of what we
already have going so that we can use the audio recorcing
functionality without having to re-design our entire back-end? Will
it have access to our pre-existing session variables?
What are the pros and cons of licensing FMS vs purchasing
hosting with FMS enabled?
If a miracle occurs and I get my app working on a dev edition
of FMS, would I be looking at any headaches for porting it over to
an FMS host? (as far as configuration and other factors)
Thank you very much for any help, it is much
appreciated.

"If we are currently running the site with a php/mysql
backend, will FMS have the ability to just "ride on top" of what we
already have going so that we can use the audio recorcing
functionality without having to re-design our entire back-end?
- Yes this is a drop in solution for you. Your flash audio
recorder (embeded in your php application) will just communicate
with the flash server. No retooling of your php is needed.
"Will it have access to our pre-existing session variables?"
- Since the recorder would be embeded in your php application
I dont think you would need to pass session variables into it but
it is possible.
"What are the pros and cons of licensing FMS vs purchasing
hosting with FMS enabled?"
- Hosted solutions have a recurring cost compared to
licensing and running it yourself.
"If a miracle occurs and I get my app working on a dev
edition of FMS, would I be looking at any headaches for porting it
over to an FMS host? (as far as configuration and other factors)"
- There should be no headaches since your app is simple. The
main factor I would see is just storage limits on a hosted server.
Hope this helps.

Few general questions and j2sdk 5 questions

Hello guys
I hope the new java development kit have some way to deal with scanner's TWAIN. Does it?
What is the new Each-for loop used for?
I googled the internet and not find any site that provides me with final reports to Seniors presented by Computer Science Students, is there any?
With Regards
M. Tleis

I hope the new java development kit have some way to
deal with scanner's TWAIN. Does it?No. TWAIN is a Windows only standard, hence standard Java can't support it. There are third party libraries (such as Morena - http://www.gnome.sk/Twain/jtp.html) you can use to interface with TWAIN though.
What is the new Each-for loop used for?Foreach loops are a syntactic sugar that simplify looping over collections. In Java before version 5, you might have written code like this:
List things = new ArrayList();
things.add("abc");
things.add("def");
things.add("123");
for (Iterator i = things.iterator(); it.hasNext();)
String thing = (String)it.next();
System.out.println(thing.charAt(0));
}Java 5.0 lets you do the following:
List<String> things = new ArrayList<String>();
things.add("abc");
things.add("def");
things.add("123");
for (String thing: things)
System.out.println(thing.charAt(0));
}

A few general questions about the different iPod Touch models

What is the difference between the 2nd Generation and the 3rd Generation iPod Touch?
How often do they release a new generation model?
Does anyone know yet how the 4th Generation model will compare to the 3rd and 2nd Generation models?
Thank you.

What is the difference between the 2nd Generation and the 3rd Generation iPod Touch?
See:
http://en.wikipedia.org/wiki/Ipod_touch#Models
As to when a new model might be released and what it might feature, no one here knows or can say. We'll all just have to wait and see. As Sandra indicated, you can read the various rumor sites, but as to what rumors if any you can believe, your guess will be as good as ours.
Regards.
Message was edited by: Dave Sawyer

A few general questions relating to H55-GD65 and core i5 750 Lynnfield

I finally made the jump from AMD to intel, and DDR3 ram, been reading the forums for around 3hours, been a member for 2hrs. Been building systems since Redhat 9.0 came out, so Don't expect any thing as funny as Quote
because I want to know the temperature of the IOH without the heatsink.
Would it be better to run 2gig X 4 = 8gigs of RAM, or 4gigs X4 = 16 gigs?
Concerning dual channel mode, must I buy them in matched sets, or can I buy one stick at a time, obviously buying the same exact kind each time?
To run DDR3 1600mhz on this board will I need to set the voltage/timings manually, or will it auto detect?
From what I've read the pcie controller is on die, and with the i5's you can only run 1@ X16 or dual X8, am I correct?
If I get a pcie x8 sas raid controller card, will it affect graphics performance?
Also this will be my first attempt at dual booting sata hard drives.
Would it be difficult to have win7 x64 on the mobo's onboard sata, and linux (either Mandriva, Open Suse, or gentoo if my insomnia is still acting up)
on the sas card?
Edit: Almost forgot, has any one else had issues with the onboard NIC dropping connection? It never happens when It is in use, only when i walk away from it, as an example Wow's latest 4gig patch had 900megs to go on a 1.1megabyte connection, upon going to sleep and locking the computer windows key-L, woke up with it having 500megs remaining and as soon as i opened my browser my connection picked right back up

Hello and welcome,
Quote
Would it be better to run 2gig X 4 = 8gigs of RAM, or 4gigs X4 = 16 gigs?
Concerning dual channel mode, must I buy them in matched sets, or can I buy one stick at a time, obviously buying the same exact kind each time?
To run DDR3 1600mhz on this board will I need to set the voltage/timings manually, or will it auto detect?
Its better to use 2x4GB, to lessen the strain on the memorycontroller and yes, you'll have to set it to 1600MHz yourself most of the time.
The memorycontroller is rated for 1066/1333MHz, so anything beyond is considered overclocking and thus the controller will not set those higher timings automatically.
Do you really need 8GB? For office, internet and gaming, normal homeusage, 4GB is more then enough, 8GB is nice if you render a lot or if you use cad/cam and photoshop stuff
Quote
From what I've read the pcie controller is on die, and with the i5's you can only run 1@ X16 or dual X8, am I correct?
If I get a pcie x8 sas raid controller card, will it affect graphics performance?
Yes it runs @x8 when running 2 vga's, or in your case if you use a PCIe x8 card, but the impact is none, even the GTX480 and the HD5970 are not capped when @x8, so no worries there.
Quote
Would it be difficult to have win7 x64 on the mobo's onboard sata, and linux (either Mandriva, Open Suse, or gentoo if my insomnia is still acting up)
on the sas card?
I have had dual and even triple boot since XP and never had any issues, be sure to write the different os to different hd's or partitions. About Linux on a sascard, no idea, Im not familiar with that.
Quote
Edit: Almost forgot, has any one else had issues with the onboard NIC dropping connection? It never happens when It is in use, only when i walk away from it, as an example Wow's latest 4gig patch had 900megs to go on a 1.1megabyte connection, upon going to sleep and locking the computer windows key-L, woke up with it having 500megs remaining and as soon as i opened my browser my connection picked right back up
Check your windows powersavings settings, maybe it turns it off when in standby/sleep mode.
If you cant find anything there check bios, to make sure onboard NIC is always on, although I believe you must find such a setting in windows.

General Question on Proxies

Hi,
I have few general questions....
How to decide which proxy to be used: Java or ABAP?
What are the deciding factors?
Which one is better when it comes to performance?
Regards,
Rajani Kumar

bump

Business Objects Training -General Questions

Hi,
I am just Going through the Business Objects...had some few general questions.
1)What is the current Version on BO
2)Where does Crystal reports & Xcelsius fit in Business Objects
3)Does Power Center & Informatica are also included in Business Objects
Thanks

The latest version of Business Objects Enterprise is XI Release 3.1 Service Pack 2. There have been several fixpacks delivered on top of this as well.
Crystal Reports and XCelsius are tools to build Reports and Dashboards respectively. While XCelsius is suited for creating sleek dashboards with very aggregated data - usually less than 2000 rows per report, Crystal Reports can be used for reporting off data warehouses requiring reporting off large data sets.
Informatica Powercenter is a tool proivded by an independant vendor and is not a Business Objects Product. Business Objects Provides Data Integrator, which is pretty much as rugged as Informatica and provides all the functionalities of ETL(Extraction Transformation and Loading).

General Questiona

HI All,
I have few general questions, Please help me to underatand
1. What is good money /5py
2. what is /5U1 Tot ER tax how will it get generated.
Pls give me an example.
Thanks
Veer

Veer,
Good money (Wage Type /5PY) is the excess of current period earnings over any offsets from inflows. Itu2019s calculated during a retro when a claim is present. For instance:
During pay period 01.2010, an employee leaves the company and owes 5,000. The employee does not get paid because more is owed than is payable.
During pay period 05.2010, the employee is rehired at a salary of 6,000. When the payroll is run, the system will retro to pay period 01.2010 and record 1,000 u201CGood moneyu201D in wage type /5PY in pay period 05.2010. The calculation is:
+ 6,000 Salary
- 5,000 Claim
Regards,
Howard

SAP CM25 which profile to use and why and some general questions

Hi there,
I have a few general questions, if you may share your thoughts on this.
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
Thank you

Hello
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
It can be used for both depend upon bottle neck resource whether machine or labour.
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
Better it should be finite planning for planned order also you can use MRP with lead time scheduling.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
It depends upon the data load and selection,
Restrict the number of objects to be displayed, for example, select only a small number of work-centers/orders.
Customize the time profile (transaction OPD2) such that the database read period, the planning period and the evaluation period are as small as possible. As a result, fewer objects are read and displayed.
Refer KBA 2038780 - Tips for performance improvement on Capacity Leveling
If you want to process more orders, check whether a batch planning (planning in the background on transaction CM40) is possible.
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
It depends upon your requirements which transaction to use and which profile. You can customize your own profile also.
Best Regards,
R.Brahmankar

A few general agent questions

We've been asked some general questions by our agents that I have been unable to find answers for, (although 4 and 5 are likely working as designed). We are running IPCC Express 7.0(1)SR05_Build504 and these are all phone agents. We do not run the agent desktop client. Any assistance in answering these questions would be greatly appreciated.
1. TransfertoVM softkey "grayed out" while on a CSQ call. Can it be enabled?
2. While logged in to CSQ, is there a way to start dialing prior to
lifting the receiver?
3. Is it possible to handle more than one CSQ call at a time, e.g. put a call on hold and answer
another CSQ call.
4. Upon selecting Agent Login (single-button login), can the agent automatically be put into Ready?
5. Upon Logout, can the phone be returned to the main screen, rather than getting the manual agent login screen?
Again, any assistance in answering these questions would be greatly appreciated.
Thanks,
Roger

Hi
1) Isn't that an IPMA softkey? Never tried it, but whilst it's not in the 'unsupported' list, I wouldn't expect using any IPMA features in conjunction with CAD would get you good results. If it doesn't cause you stuck/ghost calls, I would expect erroneous reports...
2) Being logged into a CSQ doesn't affect the way the phone works.
- You can dial the number then either lift the handset or hit dial (for speakerphone)
- You can press speakerphone or headset then dial
I guess what you are referring to is if you are using the IP Phone Agent in conjunction with a headset? If you are, then the IPPA usually obscures the 'new call' and 'end call' softkeys that you might use if you leave the headset button lit. I guess this isn't the case, as you refer to lifting the receiver? Unless you have motorized lifters.. If that's what you have, you can try getting users to either :
- Manage their onhook/offhook state using the headset key as if it was the speakerphone key (i.e. press it to hang up or pickup)
- Use a headset/phone combination that supports HHC
- Switch to CAD, or CAD-BE if you can't install PC software for some reason.
3) No. The system is designed specifically so that this should never happen.
4) No.
5) Again, no... you can't customize the BIPPA service... If you use CAD or CAD-BE this wouldn't be an issue.
Regards
Aaron
Please rate helpful posts...

Where to direct a general questions about foreign films subtitles?

I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTunes and they more than happy to refund the money back to my account. Now after a few weeks, the iTunes store DOES list Eng subs for this film. I don't want to purchase it again and have to contact iTunes for another refund...Therefore my question is, is there a general question contact one could use to find an answer to my question. Basically, to verify that this movie, indeed has English subs before I re-purchase.
Any info is appreciated!

Yes I know as the [https://support.mozilla.org/en-US/questions/ Questions] section is more for desktop Firefox support and the place I linked to is for "Firefox OS" support in English where some who are involved with it do post in it occasionally.
I would have moved that [https://support.mozilla.org/en-US/questions/962783 thread] to the "Firefox OS" English section, however I cannot as the [https://support.mozilla.org//questions/ Questions] and [https://support.mozilla.org/forums Contributor Forums] are not the same.

Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

Few general questions

Similar Messages

Maybe you are looking for