Few N8 problems

i've done a search of the forum but not found any particular answers. My fiance has an N8, her first Nokia, and it has some problems:
1) keeps freezing, often requring a reboot
2) a few times it's changed the date and time completely randomly, going back a month or so once.
3) it seems the settings aren't saving - i changed screen lock to 10 minutes from 1 and it still locks after 1 minute, even after a reboot, and changed welcome screen from default to image, and it just showed the default hands.
4) the proximity sensor seems too sensitive, moving it a fraction while talking on a call will turn the display on and then calls are often dropped, silenced or put on hold.
5) sometimes when using the lock switch the key symbol will appear by the battery, indicating it's locked, but the screen light stays on and social still updates. at best it takes unlocking and locking again for it to lock properly with a black screen, but sometimes it doesn't respond for ages.
It's on PR1.2, so not outdated firmware. Anyone had these problems and know of any fixes? Are any apps causing problems?
Oh she lives in Arizona, and although it's not hot in the house or other buildings, i don't know if it can be affected by the heat anyway?
Is this likely to require using the warranty? it was bought new on amazon so not sure what the rights are.

Doesn't sound good.
You could try three 8 second reset, hold power button until you feel three buzz's.
Or try re installing the firmware using NSU or OVI suite before you go down the warranty route.
Good luck.
N95 (RM159) V31.0.017, N8 (RM596) Belle 111.040.1511

Similar Messages

  • I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, problem comes back.

    I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
    Camera works, with the side buttons it takes pictures.
    Although I'm not able to see on the screen.
    Mike

    First try a restore from backup
    If problem still occurs try a restore to factory defaults/new Pod.
    If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order.

  • A Few Questions/Problems With My New iPod *PLEASE HELP*

    Hello! I just received my first iPod (4th Gen, 4GB, Red Nano) two days ago (Christmas Eve) and have so far been fairly happy with it. However, I'm experiencing a few problems with it and am hoping that someone could help me.
    Firstly, a few of the album covers on my iPod are just black squares. I've read other complaints about this on the forums, but haven't seen any solutions. What can I do to fix this?
    Second, I can't figure out how to put my songs in order. On iTunes, it allows me to put songs in alphabetical order, but being that most of my songs are part of full albums, I want my songs to be in the order of when they play on the actual albums. When I try to drag my songs into their correct places, I'm not able to.
    Also, is there any way to delete the games that my iPod came with? I think they might be taking up too much room for my liking...
    OK, well if you can help or add some extra tips to getting started with my iPod, it would be much appreciated. Thank you!

    Bump...

  • Few "minor" problems with Parallels, please help...

    After successfully uninstalling Bootcamp and Windows XP, I bought Parallels for Mac and did okay on a clean install. The only problem is, everytime I plug in "ANY" USB device, I get a message (something to the effect) "Device being used by another process". When I attempt to "eject" that device, I still get that same message. Is there ANYTHING I can try??? I was hoping to either connect a flash drive with music and documents, or my 100 gig external USB hard drive, but Windows XP via Parallels does not recognize any external devices. By the way, I even went as far as installing the Mac drivers that Bootcamp requires. That did help with a few other "devices" (such as PCI devices, etc), but I cannot get Windows to recognize any other USB devices.
    Your help, opinions and advice would be GREATLY appreciated.
    Thanks
    Lunceford

    Since Parallels is not an Apple product, you'll get a better response by posting your question on the Parallels discussion boards rather than an Apple forum that focuses on Mac/Windows compatibility:
    http://forums.parallels.com

  • A few bugs/problems I met in LPX, did you met some of the problems here:

    Some of the bugs/problems drives me crazy , don't know if I can solve it:
    1.undo and redo, undo, redo, let you select other unwanted region.
    2.click on a region, it doesn't show where you are at, but the head of the region.
    3.somtimes mouse turn into other icon like zoom in glass, or pencil, or ....anything it could be , unless you press 2 or 3 on keyboard it turns back into mouse (sometimes it can't be turned back)
    4.in this new Logic Pro X, when I'm recording a midi , other midis are not playing back probably, or if I'm playing back from bar 30-40, and I adjust a track's volume in bar 20, the playback is affected and not sounding right....(I'm using external midi tracks, don't know if you use software instruments and met same problem?)
    5.during tempo change, some midi won't output/sound probably in tempo, like if I suddenly change tempo from 80 to 130, the first bar of 130 contains some 16th notes and a few of those 16 notes sound not in 130 tempo, the followd 16 notes are sounding right
    6.MTC code into another DAW on another computer is not stable, the other DAW usually stops and re-insync with MTC of LPX, when I'm using Logic 9, never met this probme...
    Somebody met these problems/bugs and
    DO you think LPX is stable ? Which one do you think is more stable , LPX or Cubase7?

    Try here (you likely tried most of these).
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • 6280 - Few technical problems, any help appreciate...

    I received my phone a week ago and had it replaced yesterday. I have a few issues and would like some guidance please! - When I switched my phone off, a factory code box came up and since then a message saying 'Allow sim card to send a message' box comes up all the time - Time, when you have a missed call or send a message, the time is 1 hour behind - My choice of tone and message alert tone keeps on changing automatically despite saving my choice - Using the 'colour' theme I can't see the symbol character cursor. Kind Regards, Shazia

    Hello.
    I got my new sim card from T-Mobile just now (despite my old one being 4 months old). The time problem and error message seem to have been sorted but not sure why my ring tone keeps changing automatically and why I can't see the cursor for symbols when I compose a text.
    Also, have you experienced problems with the battery life? I charged mine fully yesterday (when I received it) and a third of the life has gone already!
    Regards,
    Shazia

  • Few iMac Problems. :(

    Hey guys I have a couple of problems with my iMac.
    1 - The Display.
    Its a bit hard to describe this problem but after a few hours of having my Mac on and say having a safari window open. If I move the window there is a ghost mark where the window was on the screen, almost like its burnt into it. Anyone know what this is or how to stop it?
    2 - Using iPod Earphones with the iMac.
    I'm at Uni so I use the iPod earphones to listen to music. I generally have the volume around 40 to 80%. Recently I've gone though two sets of earphones on the Mac where the right earbud has completely failed. Sometimes it works, sometimes it doesn't and when it works it crackles or is very quiet. I don't know if this is a problem with the iMac but I've seen it happen to others using iPods. I literally replaced the earphones two weeks ago and they've gone again. Anyone have any ideas? I have the receipt (I think) and I have the box, I think it comes with a 1 year warranty so I should be able to replace them.

    I don't think the Apple earbuds have a one-year warranty, since so much can happen to them, including people playing them too loud or getting them wet. But I'm not sure, so you can try to get them replaced.
    Also, going forward, I would buy a set of non-Apple headphones or earbuds. For the same or better sound quality, they often cost less than the Apple white earbuds.
    For the display, you should set it, in System Preferences +Energy Saver+ pane, to use +display sleep+ after about 15 minutes of inactivity. You don't have to sleep the Mac, just the display. Having the backlighting on all the time will wear it out. With LCDs, it will come back on immediately when you press a key or move the mouse.

  • A few frequent problems in MOS

    I am facing a bit frequent 'server errors' on MOS - especially if I change the main options (like Knowledge to Service Request, or Patches & updates, etc).
    I have also seen Error #1088 a few times and sometimes, my service requests do not show up a few times if I click on the Service Requests tab. Later they do appear after a few minutes.
    Are these common observations or it could be because of my account settings.
    Thanks!

    I agree with your analysis. This is a commiserating club in effect, though I think and hope that Oracle will not ignore these issues but they will not be a priority or anybody's responsibility. This serves as a consumer feedback for Oracle. I just wanted to confirm, it wasn't only me seeing it.
    BTW, I honestly hate to see how the MOS has killed most of the ways to mask URLs making it really hard to have more than one tabs open for MOS documents. And that's a very dumb idea when browsers are allowing more and more tab functionalities. It's like moving backwards with the progress of time.

  • A few new problems with my G5. Please help!

    Ok I have fixed my graphics card dilemma however the monitor still occasionally plays up (maybe the card is cooked somewhere but still works).
    1. I have a problem that I really want to fix and it's about the Bluetooth on the Mac. I don't have a Bluetooth card but what I am using is a HP USB Bluetooth stick. I can send files to my mobile easily from the computer, but when it comes to sending things back onto my Mac from the mobile, it doesn't respond. When I send an item from the mobile, a window appears on the Mac saying "incoming file transfer" and it just idles at 'Calculating time & status'. How do I go about fixing this?
    2. Another thing, I cannot access certain sites I visit because of Rosetta. I have no clue on how to turn Rosetta off for Safari or Firefox. I tried Apple+I on the application it self and looked for any boxes that were ticked from previous advice. But I cannot find a box that says to turn off Rosetta.
    • My computer is a G5
    • Power PC
    • Leopard 10.5.5
    3. One more Problem I wish to deal with once and for all.
    I have a video capture device called a Canopus ADVC-100. I use it to capture videos from VCR, etc. I also want to get it hooked up to my gaming console and record gameplay to post on the internet. The problem is, when I open up Final Cut PRO or Empia Capture, the screen just flickers. When I turn my console settings to Pal-50, it works perfectly. But the problem is that some games only work on Pal-60. Is there a way to solve this problem and make Pal-60 work on my Mac?
    If you can give out help to any of these problems please number your answers accordingly so I know what your talking about.
    Thanks,
    Sev

    Hi Seva,
    1. Are you using the powered USB port in front of the Mac tower, or the port on the keyboard?
    2. In Safari/Help/Installed plug-ins you should find: Shockwave for Director
    Macromedia Shockwave for Director Netscape plug-in, version 10.1.1 — from file “NP-PPC-Dir-Shockwave”. Your plug-ins are found in Library/Internet Plug-ins/NP-PPC-Dir-Shockwave, nsIQTScriptablePlugin.xpt, Flash Player.plugin, flashplayer.xpt along with others. If these plug-ins are not there, web browser are unable to find them.
    Because you have upgraded from a previous version OS, you will have to locate them and move them manually. Look in Users/yourname/Library/Internet Plug-ins.
    3. What display do you have? I have mine set to 96 Hertz.
    Regards

  • Transparent spry menu that has a background color on sub menus and a few other problems(Please Help)

    Hi im a noob at dream weaver and i've been trying to create a menu and i have been having problems with this menu bar i don't know what to upload and i have made a topic about this before but i only got one reply and so i am trying to make my menu bar transparent and then the sub menu's colored with the color code #1A1A1A and the menu bars that have been color background are only the sub sub menu bars if you know what i mean and also my other problem is the spacing i have between each option is really uneven is there a way to make them evenly sperated apart from each other rather than just the size of a "box" that the text is in. Here is my SpryMenuBarHorizontal.css code
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
              margin: 0 auto;
              padding: 0;
              list-style-type: none;
              font-size: small;
              cursor: default;
              width: 100em;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
              z-index: 1000;
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 18px;
              position: relative;
              text-align: left;
              cursor: pointer;
              width: 10.8em;
              float: left;
              visibility: visible;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 100%;
              z-index: 1020;
              cursor: default;
              width: 8.2em;
              position: absolute;
              left: -1000em;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
              left: auto;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
              width: 15em;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
              position: absolute;
              margin: -5% 0 0 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
              left: auto;
              top: 0;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    ul.MenuBarHorizontal ul
              border: 0px solid #1A1A1A;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
              display: block;
              cursor: pointer;
              background-color: transparent;
              padding: 9px;
              color: #FFF;
              text-decoration: #1A1A1A;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
              font-weight: bold;
              font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
              font-size: 18px;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
              background-color: #0048ff;
              color: #EEE;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
                          background-color: #1A1A1A
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
              background-color:#1A1A1A;
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
              background-color:#1A1A1A
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
              background-color: #1A1A1A
              background-repeat: no-repeat;
              background-position: 85% 50%;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
              position: absolute;
              z-index: 1010;
              filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
              ul.MenuBarHorizontal li.MenuBarItemIE
                        display: inline;
                        f\loat: left;
                        background-color: #1A1A1A;

    See if this post helps :
    http://forums.adobe.com/message/1997762#1997762
    and this one:
    http://forums.adobe.com/message/1898539#1898539
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    http://twitter.com/nadiap

  • Aperture 2 - Maybe a few small problems/bugs

    After 2 solid days worth of playing around with Aperture v2, I was wondering if anyone else is having the same problems as me?
    1. (Creating a new book) Can't File -> Print Book -> Save to PDF. It seems to die when it gets to around 30 pages.
    2. (Trying to buy the book) Go through the sign-up process via Aperture. Following the steps, I add in CC details to my .mac details, click next (step 3 - I think) and it reports 'Unexpected error has occurred'. No joy now for 2 days.
    I really need to get this book done and dusted!!
    Any assistance would be much appreciated.

    Anyway have any ideas?

  • A few simple problems with dreamweaver 8

    Hello,
    Please watch these 20 second clips so you can see my problem.
    First video (quite fuzzy, sorry):
    http://tinypic.com/player.php?v=qsp10x&s=5
    I want it so it goes down 1 line instead of 2 lines at a
    time..
    Second video:
    http://tinypic.com/player.php?v=8wgt93&s=5
    I want to put something in that massive area next to the
    buttons table area, but it keeps going underneath..

    Hello,
    I don't think I've seen screenshot video showing a question
    before. Clever.
    1. Use CSS to set the margins for the <p> tags.
    p {margin: 0px;}
    or
    p {margin: 0.2em 0em}
    Adjust as needed.
    2. That's how HTML works. Elements follow the normal flow and
    block level
    elements, like a table, usually begin on a new "line."
    You could make the table with your navigation in it a 2
    column table.
    Insert the navigation in the first column.
    Insert a new table in the second column.
    Then, the new table will sit to the right of the navigation.
    You could also use divs and CSS to float them next to each
    other.
    Your best bet is to set DW aside for a little while and learn
    HTML and CSS.
    DW will be far easier to use if you understand how HTML
    works.
    Then you'll understand why things happen like they do, what
    is possible and
    how to do it.
    If you don't, DW will be a very frustrating adventure with a
    hard learning
    curve.
    A good place to start:
    http://www.w3schools.com/
    Take care,
    Tim
    "jimmyharr" <[email protected]> wrote in
    message
    news:gn77dk$82e$[email protected]..
    > Hello,
    >
    > Please watch these 20 second clips so you can see my
    problem.
    >
    > First video (quite fuzzy, sorry):
    >
    [url]http://tinypic.com/player.php?v=qsp10x&s=5[/url]
    > I want it so it goes down 1 line instead of 2 lines at a
    time..
    >
    > Second video:
    >
    [url]http://tinypic.com/player.php?v=8wgt93&s=5[/url]
    > I want to put something in that massive area next to the
    buttons table
    > area,
    > but it keeps going underneath..
    >

  • A few bugging problems

    First and foremost, if i were to leave my 60 gb ipod video(5th generation) untouch for like 15 hrs, i cant power it up when i unhold and depress the play button for 5-10 secs, instead i always need to restart using the MENU and SELECT button tgt which takes up considerable time and its just not right, this really frustrates me, is it a problem with the battery?
    Second, my batt life seems to be able to last me for around 5-7 hrs only, is this considered undesirable and can i request for a change of batt?
    Last, when i purchased my 60 gb ipod video(5th generation) (17th Dec 2005), i purchased also the addition 1 yr applecare protection. HOwever now when i enter the serial number to find out information regarding my product protection, the website indicates that there is "no information found, pls try again". This worries me, i no longer have my applecare registration number anymore..
    what should i do?
    will really appreciate if someone can help me out :((

    *i cant power it up when i unhold and depress the play button for 5-10 secs, instead i always need to restart using the MENU and SELECT button*
    This is how it is supposed to operate.
    my batt life seems to be able to last me for around 5-7 hrs only
    See this -> Accurately determine your iPod battery life
    i purchased also the addition 1 yr applecare protection. HOwever now when i enter the serial number to find out information regarding my product protection, the website indicates that there is "no information found, pls try again
    Did you register your iPod serial number against the Applecare?
    When you received the Applecare package, you should have registered it and input your iPod serial number.

  • A project for school-once it was done-I had to add a few videos-problems

    I was doing a birthday DVD for one of my teachers using FCE, we used the school photos and used the computer for audio for each student to say or sing happy birthday.
    Once it was done, we realized , we forgot two students. I went back and every time I added the pic, then the audio, it messed up my timeline.
    Sometimes, it cut into someone else photo or completely eliminated it and the audio of others were out of sync. Because of the time deadline, I had to apologized to the two students. If I had more time I would have probably figured it out.
    In hindsight, I should have locked the audio and added the photos, maybe that would have help. Also, I wanted to move one clip to another location and ran into problems doing that. I remember in imovie, you drag the clip to a new location and all the other clips move and accommodated the clips. In FCE, everything got out of whack.
    For next time, what is the best way to do this, especially once is done and you have to go back to the timeline and make adjustments?

    stingray_on wrote:
    Sometimes, it cut into someone else photo or completely eliminated it and the audio of others were out of sync.
    If you want to edit it in between other clips, you should use the INSERT edit. You might have used overwrite by accident.
    Also, I wanted to move one clip to another location and ran into problems doing that. I remember in imovie, you drag the clip to a new location and all the other clips move and accommodated the clips. In FCE, everything got out of whack.
    In the timeline, for having the rest of the clips "ripple" down to accomodate the edit, you could first copy the clip, then do a ripple delete (shift-delete). Then you could Paste-insert it (shift-V) where you wanted to move it to.
    Message was edited by: skalicki`

  • A few bios problems with my 915p Neo2 platinum board

    I'm wondering af anyone here can help me.
    I just got a new system and a friend of mine helped set up the bios for me, afterwards he failed to tell me how he had configured the bios (my first big mistake).
    Since the buidling of the system there have been 3 short beeps at the beginning of startup. I was told that it was a warning system of some sort and when i looked it up, the informations pointed towards a problem with the RAM.
    I ran memtest86 and it found no problems with the RAM, so i contacted the site i bought the parts from and they suggested i reset the bios.
    I did so and the beeps remained, but my DVD and DVD-writer drives arent being detected anymore.
    I took my PC around to another friends house with only his keyboard and monitor connected. The beeping had stopped before we changed anything. Bringing it back around to my house resulted in the beeping returning.
    From this i gathered that the only things different may have been his power source and the peripherals i have attached to the back of the case. (speakers, printer, kb/m, etc)
    Going by the manual map, my 2 HDDs are connected as slave/master in IDE port 1 and my two DVD drives are connected to the yellow IDE port that is closest to IDE port 1 (it's either IDE 2 or 3, the map isnt too clear on which is which).
    Long story short, can anyone help me in identifying the source of the beeps and their meaning, an optimum setup for my bios and how to get my DVD drives to work.
    Thanks in advance to anyone who can help me. I'm fairly new to building computers and my friends are the type to suddenly become unavailable as soon as a problem arises.
    edit: just noticed i missed the spec description part menitoned in the rules.
    MSI s775 915P-Neo2-Platinum
    Version 1.4 of bios
    Pentium 4 540 LGA775 3.2GHz
    Corsair VS 1GB DDR2 240 pin RAM
    256 MSI PCI-express GF6800GT, latest drivers
    600W 3XS-EzCool PPFC
    Western digital WDC WD1600JB-00EVA0 (160GB) (master)
    Seagate U series 5 HDD ST340823A (40GB) (slave) Both on IDE slot 1
    Liteon DVD-ROM (spec unavailable)
    MSI 4x DVD-RW +/- (part no: G57-CB00243, this is all i could find on this part form the box)
    Sound Blaster Audigy
    Windows XP SP2
    second attempt at clearing up the garbled mess from above.
    Motherboard is making 3 short beeps on startup. Indication of a problem with memory. I've established that it's something external that causing the beeps as the memory has checked out fine with memtest86. Hence i will be checking all the attached devices.
    I was guided to reset the bios in an attempt to clear up this problem above. Doing so has resulted in my bios being unable to detect my DVD drives.
    My DVD-drives are connected to IDE port 2/3 (manual is unclear on which is which).
    Everything was in working order (with the exception of the beeping) before the bios was reset but due to my lack of knowledge/involvement with the original configuration of the bios, i'm at a loss as to how to fix it.
    If anyone could recommend me any updates for the bios, or could advise me on how to configure my bios accordingly to the parts i have i would be most appreciative. Also, if osmeone would be abel to shed some light on the beeping issue i would be thankful also.

    Quote
    Originally posted by Danny
    The board uses a Via raid controller for the IDE 2 and 3 channels, and you do have that enabled.
    Under SATA devices configuration you should select Enhanced instead of compatible. But this should effect your problem.
    I see there is a 1.5 bios released that mentions the via controller
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=601&kind=1
    Maybe someone with this board will pitch in and help.
    I saw this and was wondering if i should install it. It would be the equivelent of resetting the bios again wouldnt it? So it wouldnt be that much of a step back from where i am at the moment and it might be able to sort my IDE problems.

Maybe you are looking for