FEW problems with E71

Hi, been using this since past 1 week. Facing the foll problems. Requesting help...
1) Unable to turn-off voice-alerts from the main home-page
2) Frustratingly slow camera start-up after invoking the same from either from home page or the media applications
3) Unable to switch between EDGE & 3G networks. Default is EDGE only. Need an option to auto-switch between EDGE & 3G
4) Unable to configure EXCHANGE mails. It says check if Memory is properly installed, meaning its trying to check the application from the memory.
Requesting help on the above problems. Regards, Sajjid

I can't help with items 1, 2 and 4 ... although I suggest checking the following for your issue number 2 ref EDGE and 3G:
Check that the phone is set to "dual mode" at the following option:
Tools --> Settings --> Phone --> Network --> Network mode
Your options are GSM and Dual mode ... Dual mode allows the handset to automatically switch between GPRS and 3G (or that's how it works with my provider).
HTH.
My previous phones:
6310i --> SE K750i --> E50 --> E61i --> E71
... much prefer the Nokia phones, especially the E71

Similar Messages

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here.

A few problems with Gnome

Ive installed gnome on a fresh arch install.
Ive got gnome and GDM working now but im having a few problems with some of the apps in gnome.
The first problem ive noticed is when i attempt to open "Apperance Preferances" the bug report is:
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
the next error is when i open the preferances for the file browser
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)
seahorse nautilus module initialized
** (nautilus:3623): WARNING **: Unable to add monitor: Not supported
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)

Ive installed gnome on a fresh arch install.
Ive got gnome and GDM working now but im having a few problems with some of the apps in gnome.
The first problem ive noticed is when i attempt to open "Apperance Preferances" the bug report is:
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
the next error is when i open the preferances for the file browser
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)
seahorse nautilus module initialized
** (nautilus:3623): WARNING **: Unable to add monitor: Not supported
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)

Problems with E71 and fearing firmware update

Hello, I currently have a Nokia E71 with phone software version 200.21.118 Installed and here are the following problems that i am facing
I cant install or run java apps anymore and whenever im trying to open a secure page on the internet my phoine locks up
also im having other problems with a few other apps locking up when they go online.
I thought that maybe updating the software will fix the problem
the fear that i have is i payed $700AU for this phone and im scared that updating it would make things worse or fatal
can someone help?
Thanks

I fixed it! After calling Apple support, we tried every kind of reboot you can think of:
command-option-P-R
Command-option-R
Shift key down
unplug
unplug and hold in start button for 30 seconds
Nothing worked. So I was going to take it in to the "Genius" bar, but I tried one more thing. I unplugged everything from the Mac - monitors, USB, ethernet, everything. Rebooted and waited for a minute. I then plugged one of my monitors in and voilá! the progress bar was there. So there you go - good luck!
Dan

Few problems with PS Elements 11

Hi everybody,
I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
thanks!

Welcome to the forum.
As Pierre points out, this is the Photoshop, and not the Photoshop Elements Forum.
I will Move the post, and your link will follow, along with any e-mail subscriptions. The PsE Forum is very active and helpful.
Good luck,
Hunt
[Moved to PsE Forum]

Few problems with PSE 11

Hi everybody,
I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
thanks!

Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
Regards,
Stervogel.

A few Problems with my Zen Mi

Hi I have had my player for just over year now and a few problems have just come up. First off the power switch is getting harder and harder to use. I am having to push the power button pretty hard now and have to hold it for a little while. Also when connect my player into the computer and go into the creative mediasouce player and click to access my zen micro it says its not connected.
Can anyone help me with these problems.
Its a 5gb zen micro version .02.05 if that means anything

Regarding your connection problems, are you using WMP? It is known to cause connection problems with the Zens.
Have you tried reinstalling the Creative Software?
Have you tried the connection with another PC IF available?
And regarding the power button, I'm guess that it is due to aging? I still have my Zen Micro (even though I use my ZVM) and I do have to hold the power button a little bit longer than before (3-5 seconds more) for it to turn on. Same happens when I use the lock mode (I just tried it)
and it's kinda rough for it to push instantly (effortless but still feels a little rough).
Good luck with your connection, let us know if it worked!

A few problems with my site I'd be grateful for help with...

Hi, I'm encountering some strange problems with my website, and I'd be really appreciative if anyone could help me. The site's live so I've included links to help anyone kind enough to respond. Thanks in advance.
1. On many of the pages, a scrollbar appears at the width of the container as opposed to the browser window. The 'clear' property doesn't seem to work, (although I am quite new to it so could have made some sort of basic error).
http://austinlindsay.com/suretowin.html
2. I'm having difficulty with the 'screenshots' on the left hand side of the page. First, the larger images should only appear when hovering over the thumbnails, but they seem to appear when hovering over the space where they appear.
The second problem is trying to make the background of the larger images consistent with their individual images in the foreground. Problem is the background always have a fixed width across the page. You can see what I mean when hovering over the final screenshot (called 'Scoreboard')
http://austinlindsay.com/virtuoso.html
Two problems with the 'Featured' section. The central link jilts slightly when hovered over. It's really strange. I've tested it by changing the order and putting a different link in the centre, and found it's not a problem with a link, it's a problem with it being positioned centrally. I couldn't find a solution for it, though. The final problem with this is that a horizontal scrollbar appear when hovering over any of the links (apart from the final one, Logos, for some reason).
http://austinlindsay.com/
I know there's a lot of problems here, but thanks in advance to anyone who can help!

No, there is definitely no height property on the container (or the content which is causing the problem). But to be fair, it may be because the content that gets hidden is, until hovered over, not visible. I've posted the code for that below, along with the container if anyone could help?
/*main container*/
#content {
    position: relative;
    left: 0px; right: 0px;
    width: 960px;
    background-color: #333;
    padding-bottom: 3em;
    border-top: 0.1em solid #FFF;
    border-bottom: 0.1em solid #FFF;
    overflow:hidden;
/* container for the screenshots content below this*/
#main_content {
position: relative;
margin: 0 40px;
top: -160px;
/* screenshots - content that seems hides itself*/
#screenshot_list {
position: relative;
left: 72px;
#screenshot_list a {
border:none;
text-decoration:none;
padding: 5px 0px;
display:block; /**space between icons**/
position: relative;
width:150px;
#screenshot_list a span {
visibility:hidden;
display:block;
position: absolute;
/**adjust positioning of full size images in px or %**/
left: 130px;
top: 0px;
/**optional image captions**/
font-size: 13px;
line-height: 1.2;
color: #FFFFFF;
text-align: left;
background-color: #455c5a;
background-repeat: no-repeat;
/**optional image borders & padding**/
border: 2px solid#455c5a;
padding: 15px;
z-index: 100;
#screenshot_list a:hover span, #screenshot_list a:active span, #screenshot_list a:focus span {visibility:visible; z-index: 100;
padding: 15px;
#screenshot_list a:hover, #screenshot_list a:focus
{visibility:visible;
border: none;
z-index: 100;
padding-left:2px;

A few problems with the ipod touch

Hi all,
Just trying to get some feedback from everyone. Firstly I love the ipod touch, I reckon it was a great buy compared to all the other new ipods (please dun shoot me on this, this is my opinion :P) but I've noticed some problems with it and was wondering if anyone else has the same problems.
Firstly when I sync the touch to my computer and change the name/details of 1 movie file, when I go back to the touch in the videos section the frame that is used on the list goes missing and defaults into the generic one (the grey looking monitor). I'm not sure why. I cannot get it back no matter what I try.
Another thing, I swap back and forth syncing using my MacBook Pro and my Toshiba Tecra (XP SP2) depending on which one I'm using at that particular moment. It's fine for music, but when I try to upload any kind of movies on the Tecra it seems to give me a BSOD. Something to do with the QT program files clashing with the system. Anyone had this problem before? And as a result I would just go to my MBP to upload movies and such.
Any kind of feedback and help is greatly appreciated. Thanks for your time all.

Try here (you likely tried most of these).
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store.

I'm having quite a few problems with Muse, here's one of them.

When I edit my site in the Muse application, this is how it looks:
When I publish it, this is how it looks:
On top of this, similar things are happening with the length of master pages not correlating with the individual content pages. Can anybody explain this and maybe suggest how I can fix it? Obviously this is unusuable at the moment so I'm in need of a fix. Thanks.

As to your installation problems I'm not sure I have enough information to help you there. What do you mean by initialize? Are you having this problem with every program you install? What program and version are you trying to install?
As to the problem playing Windows Media Files there are plenty of players out there. One that I use is called VLC. It's a free solution and will play a wide variety of formats.
http://www.apple.com/downloads/macosx/video/vlcmediaplayer.html
Good Luck!
FW800 Dual 1.25Ghz & 15 PB G4 1.67Ghz Mac OS X (10.4.1)

A few problems with IMAP on N78

Hello,
I'm the owner of a Nokia N78 and i'm trying to read my email using IMAP over TLS. It partially works, but I encounter several problems.
The mail server is a dedicated server I run with some friends. It runs Dovecot as an IMAP server, and it uses the Maildir scheme for mail storage. I also sort my mail using many subdirectories. The overall setup works well, I've been reading and managing that mail account using IMAP with Thunderbird for years.
I configured the phone to use my mail account, and it connects to the server and download headers from the inbox without any problem. The two problems I encounter are the following :
- Reading messages is abnormally complicated. When I want to read a message from the inbox which is not downloaded yet, the software asks me if i want to download it, i accept, it connects to the mail server, downloads the message, and displays... a blank screen showing only the "Subject:" word, as if the mail was totally empty. When i go back to the message list, the message I was trying to read has disappeared. I must then connect again to the mail server (using "Options > Connect") to make the message appear again (and marked as downloaded) in the list, and only then can I read it.
- I can't access the other directories. The phone manages to list them, I can see them in Retrieval settings > Folder subscriptions, I can subscribe to some of them and they appear in the list with the Inbox, but when i navigate inside them they are always empty. Options > Connect and Options > Download mail > All don't do anything.
I searched the web and this forum but I found nobody with a similar problem. I tried it many times with many different connections (UMTS, GPRS/EDGE, several wifi networks). I have no problem sending mail (through SMTP/StartTLS) using the same application and the same server. The phone's firmware is up to date.
Message Edited by endyfourbe on 21-Oct-2008 09:08 PM

hello,
I never tried to connect to a dovecot server but I do use N78 to connect via IMAP to Gmail on a standard, not secure, connection. I usually retrieve only the headers for the Inbox then I decide if I want to retrieve the message and then I ask for the attachments. So I guess the 3 steps approach to the email is correct, usually you do it with the same connection open but it could happen that the remote server is closing the connection and so the phone is bringing down the interface for packet data connection.
I mean nothing strange in the 3 stage retrieval, the disconnect could be some problem with dovecot.
The rest looks really weird, maybe I will try to subscribe to different folders and see what happens.

A few problems with Leopard running on my White iMac...

I have only found 2 problems so far with Leopard running on my iMac. First off, the most annoying one:
Sometimes, especially when switching users, the screen turns to the "gray screen of death." You know, the one with the request to restart your computer in like 4 languages and a huge picture of a power button... anyway, it is getting quite annoying and I wish I could make it stop. It has also happened when I have been dealing with moving large amounts of data, "large pictures, movies, etc.)
And now, the second problem. I was just looking up the memory left on my hard drive when I noticed something I hadn't before. my 160gb hard drive had 50gb left. not too strange there. but when I checked through all the things (apps, users, system, library, developer, etc.) in it (I simply did apple-i and checked the gb each of them took up) and after a quick add-up on my calculator widget, all the things in the hard drive added up to 50gb. so I have 50gb free, 50gb used and a 160gb hard drive. How does that work? Do I need to do something to get that extra 60gb back or is it just gone???

STEVE!!! wrote:
Is there any way just to show hidden folders like on a PC?
There's probably a way to coerce Finder.app into showing everything
(all is possible in unix) -- but I don't know the OS-X magic words.
It told me that improper of the "sudo" command could lead to data loss
and i don't want to risk doing anything stupid (like a misspelling) that
could lead to my hard drive being wrecked.
Good advice. IMO, the 'du' (disk usage) command is safe, because it's
'read only' -- but I undestand that you'd be hesitant to trust your data
to advice fom an anonymous voice from "The Internets." I can't/won't
argue with common sense.
You can run the same command without the 'sudo' prefix. It might
miss a few things and/or spit some 'permission denied' messages,
but the results will at least be a lower-bound of disk usage.
...in the beginning was the command line,
Looby

Problem with E71 battery

Hi all,
I have purchased new E71, the problem is that the phone is charged very soon, aprox. in 30 mins. and the battery lasts about 2 days. I have changed the phone, thought that it was phones problem, but same with the other. I have taken the battery to service centre and they told that battery is good. I updated the firmware but problem still exists. Can you make some advice?

DO NOT DRAIN your batteries completely, this is anew generation of batteries and it actually is potentially harmful to them to drain empty. it also REDUCES the life of your battery. when the battery gives you the first signs of low batt indication this is a good time with modern batteries to charge. charge it until it says it is full. no need to charge any further than that. batteries come partially charged out of the box these days. plug one into the phone and use it until batt low, charge it to full again and repeat the first three to four times. after that battery is good to go and you no longer have to worry about it. you can charge it as you please, just keep one thing in mind, do not let it discharge completely.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Problem with E71 Software Updater?

When I use Software Updater to update my E71's software, all works well until I get to the screen with the "Update" button, which is greyed out and unclickable. I've tried rebooting the phone and my PC, but nothing changes.
Has anyone had this problem?
Many thanks for your time,
Paul

28-Aug-2006
08:03 AM
myatooooo wrote:
still haven't arabic languge so what shall i do with my phone
What is your phone model?
Regards,
Arabian
We Arab Portal Network http://www.WeArab.Net/
Phones: 9300i, E70, N80, 6670, 6280, and 6111

Quickoffice problem with E71 Ver. 501.21.001

When I updated my E71-2 to software version 501.21.001 I found that I could no longer edit Quickoffice spreadsheets while the "Nokia Messaging Email" Inbox was open. I had been able to do this previously and on my E75. Attempting to either edit a cell in a spreadsheet or to select another worksheet in a workbook while the Inbox was open caused Quicksheet to close and return to the file seletion menu. The Version of Nokia Messaging Email is the latest, Build 9.7.0.21 (main).
Upon investigation I discovered that the E71 update had also installed a new version of Quickoffice, Version 6.2.388. There appears to be a conflict between this version of Quickoffice Quicksheets and the E71 501.21.001 software.
I contacted Nokia support but they didn't seem to understand the problem or be able to provide a solution.
I contacted Quickoffice Customer Support and they provided a URL to replace Quickoffice Version 6.2.388 with Version 6.2.217. This solved my problem completely!
It appears that the 501.21.001 update to the E71 installs a bad version of Quickoffice.
I am making this post in case other people have a similar problem and in hopes that Nokia might fix this problem created by the update to the E71.

thank u . can any one help me to change my colour of the fonts if possible on my e71 . i have completed hacking the mobile . can we change the colours of each page of e71{home screen colour, menubackground colour , applications background , setting background colour etc } , if we can than help me .......................
i am new to my phone .................
and list some good themes area for me and last thing can we create our own fonts and themes . if yes than instruct me please .................

FEW problems with E71

Similar Messages

Maybe you are looking for