Few problems with the dock. Creating App stack, and removing apps from dock

OK.. I am running leopard 10.5.4, and decided I wanted to use the app folder as a stack. I made my new folder with the alias' inside. However, when I went to move it into the dock, 9on the right side of the sizing bar), the other stacks failed to shift out of the way, so I couldn't add it in.
Another problem is that I can't see to remove apps from the dock. I have admin rights, and they are not active, hence the desire to get rid.
Anyone have an idea??

Erm... Doh! had dock 'locked' in Onyx...

Similar Messages

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
Can you help?

Hi Marv13, disregard my last post. The 6520 does have eFax capabilities and the support document I provided a link to needs updating. If you contact HP Cloud Services phone support they will be able to resolve this issue for you. The number and available times are posted below:
HP Cloud Services
1-855-785-2777
Hours of Operation
Monday-Friday 8am-11pm ET
Saturday 10am-6:30pm ET
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .

Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.

holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{

HT201210 i have problem with the firmeware file...and I do not know what is that

i have problem with the firmeware file...and I do not know what is that

Make sure you are updating your phone the correct way, by connecting to iTunes and clicking Check for Updates on the Summary tab of your iTunes sync settings. Do not try to download the firmware file from the internet first. Also be sure iTunes is up to date before updating.
Delete the existing firmware (.ipsw) file and try again. You will find it at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup

HT201441 I bought an ipad off of criagslists, and I cant get intouch with the seller to get them to remove it from thier icloud, what should I do?

I bought an ipad off of criagslists, and I cant get intouch with the seller to get them to remove it from thier icloud, what should I do?

Nothing, except "keep asking". Maybe you can return it.
In too many cases the "sellers who do not respond" stole the device.

HT201250 How do I get Time Machine back on my dock? I made a mistake and removed it from dock, somehow ended up in trash, what do I do

How do I get Time Machine back on my dock? I made a mistake and removed it from dock, somehow ended up in trash, what do I do?

Uh…you're saying two entirely different things here. If you removed Time Machine from the Dock, it could not be in the Trash. But if you removed it from your Applications or Utilities folder and put it in the Trash, that's a problem.
So, which one did you really do?

Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Problems with the "Date Created" Metadata in Adobe Bridge

Hi everyone.
I am currently working on an electronic photo library for our organization. Part of my mandate is to add a Date Created metadata on all the photos since it is very important to know when the photo was taken. Some photos were dated since 1980s. Since we do not have the digital version of the old photos, we end up scanning these and, in effect the date specified on the "Date Created" was the date it was scanned.
I have the date of some of the old photos when it was taken, but for some, I only have the month and the year (sometimes, just the year). Inventing a day and a month is not an option.
Is it possible to enter a month-year or just the year on the Date Created field under Metadata?
I appreciate your help.
Thanks,
.m.u.r.d.o.c.h.

The problem is that dates are recorded in the file in different schemas. Bridge is displaying the XMP Date Created field which was likely derived from the original Exif date (probably DateTimeOriginal, but may be DateTimeDigitized). This will be the date recorded in the file by the scanner software at the time it was scanned.
The IPTC Date Created field is handled differently. It seems counterintuitive, but if you work in the news business you will know that news photographers often use the IPTC Date Created field more like a "date submitted" or "date scheduled" property, so that photos for a particular shoot which may have been captured over multiple days will sort together. Because of this, most image browsers will not update the XMP Date Created (or Date Taken) fields when the IPTC Core date is changed.
You can edit the original capture date in various programs, which should cause both the Exif and the XMP Date Created fields to be updated. Two that come to mind are Lightroom and BreezeBrowser Pro (for Windows). I've found that with certain images it is necessary to use both programs to get all the dates to line up.

A few problems with the ipod touch

Hi all,
Just trying to get some feedback from everyone. Firstly I love the ipod touch, I reckon it was a great buy compared to all the other new ipods (please dun shoot me on this, this is my opinion :P) but I've noticed some problems with it and was wondering if anyone else has the same problems.
Firstly when I sync the touch to my computer and change the name/details of 1 movie file, when I go back to the touch in the videos section the frame that is used on the list goes missing and defaults into the generic one (the grey looking monitor). I'm not sure why. I cannot get it back no matter what I try.
Another thing, I swap back and forth syncing using my MacBook Pro and my Toshiba Tecra (XP SP2) depending on which one I'm using at that particular moment. It's fine for music, but when I try to upload any kind of movies on the Tecra it seems to give me a BSOD. Something to do with the QT program files clashing with the system. Anyone had this problem before? And as a result I would just go to my MBP to upload movies and such.
Any kind of feedback and help is greatly appreciated. Thanks for your time all.

Try here (you likely tried most of these).
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store.

Having a few problems with the codes for this program.

i type in the code. in notepad, then compile it to java, but i always seem to get 3 errors. if anyone can help, id really appreciate it.
using java:
Calculate the salary at the end of two weeks. You know that:
? For the first 40 hours worked in a week the pay rate is $10/hour and after that
initial 40 hours the pay rate is $15/hour.
? If the total salary (week1+week2) is less than $500, the employee will receive 10%
bonus. If the salary is between $500 and $1000, the employee will receive 5%
bonus. If the salary is between $1000 and $2000, the employee will receive 1%
bonus.

Well, maybe if you showed your code and the complete and exact "messages", we could help you.

Time zone compatability problem with timed event created on iOS and pushed to Windows7 Outlook calendar for sharing

Hi, I am in Jerusalem time zone. My Windows7 LAPTOP time zone is set to it (UTC+02:00 Jerusalem). My iPhone5 and iPad are both "Set Automatically" (ON) to Jerusalem. When I create any new event in my outlook on my Laptop it's generated with the Jerusalem time zone and pushed properly via iCloud to my iPhone and iPad. However when I create a new timed event on either my iPhone or iPad. or even in iCloud calendar (in a browser) the event is pushed to outlook on my Laptop in a "Beirut" time zone. Now that both Jerusalem and Beirut are on the same time zone (UTC + 02:00) it doesn't create any problem (though I prefer to see that the pushed events are indeed in Jerusalem time zone and not Beirut...). However, at and around day time saving change days there are problems of events created on iOS devices or even in iCloud (using browser) and pushed to outlook at the wrong times (1 hour earlier or later, depends on the change direction in Jerusalem time...) with a Beirut time stamp.
How can I resolve this problem and make sure all timed events, created on iOS devices at a Jerusalem time zone, appear as such after pushed via iCloud to my windows7 Outlook calendatr? Thanks!

I also have this issue (iPhone 5). Outlook needs to be configured properly in that timezone option needs to be selected. Which is challenging enough.
However the bigger issue for me is that when I open the ICN file:
1. I have no way to accept decline etc.
2. When the event is populating the calendar in the wrong time I can neither cut and paste nor select and move. It is totally static.
So for every meeting request I have to ensure it populates the right time as per my time zone. and if it doesnt i have to manually enter a second meeting 'X' hours earlier/later depending on which time zone the meeting was generated in.
I spoke to Apple. Their solution is make sure Outlook is properly configured. Fine...but good luck. I need a work around that is Apple based. Because this *****.
They said they would send to the development team. I am not holding my breath.

Problems with the batch in transaction MB1A and MB21

Hi everybody, I am new in the MM module. I am having a problem with transaction MB1A and MB21, when i try to select a batch for the movement 901. if i click the match code for the material's batch, the system shows me all the batches for the material, but some of these batches don't have available quantity stock and order creates the reservation or the material output. The system dont allow negative stock. Do you have any idea of this problem? Regards.

Hi,
In IM, when you select a batch with possibile entries, system always shows the available batches no matter whether stock is there are not.
However, if you setup batch determination strategy for example, when you are processing in MB1A, SAP fills the batch based on the criterion you define in:
MBC1Logistics -->Materials Management -->Inventory Management -->Environment -->Batch Search Strategy -->MBC1 - Create
Select appropriate strategy (if defined in your system, say for mvt ty)
maintain search strategy and sort criteria for your movement type here.
Hope this helps!

Few problems with the dock. Creating App stack, and removing apps from dock

Similar Messages

Maybe you are looking for