Few queries in RMAN

Hi,
1. If we take full backup from RMAN utility, it will store the backup in either disk or tape. I want to know if we have 6 datafiles, one control file then what would be the name of the backup file? will it create 6 backup file?
2. Rman command is:
$ rman target user/pass@sid1 catalog rman/rman@rman
I want to take full backup, so what would be the user= SYSTEM or SYS or simply user in target. there are 5 users into the database.
waiting for reply.
vimal

Hi:
You must use one user with sysdba privileges, also you need to create the password file for doing the backup.
You also need this parameter in the init in the target databse:
remote_login_passwordfile = EXCLUSIVE
Hope this help.
CU

Similar Messages

Few queries about foreign revaluation for vendor/customer open items

I am trying the transaction F.05 for the first time for vendor & customer open items in foreign currency. I have a few queries:-
1. The ouput contains 2 exchange rates. One is picked from the transaction header. My query is from where is the other rate being picked up. In my current system, I could make out that exch rate in transaction header is being picked automatically from table OB08....however I am unable to deduce the source of the 2nd exch rate.
2. What is the significance of "balance sheet preparation valuation". Earlier in test runs, only "new difference" was getting populated. However the user wanted to see "old diff" also. So while doing some trial run in test client, I checked the "bal sheet prep valu" and posted.....after this run, I am getting values in "old diffe" and "new diff" also. And the posted amount is the difference of the two. What is the significance and ideal way?
3. Should the entry be reversed if I am revaluating at year end? Why I am asking is because in some threads I read that revaluation at year is not to be reversed....
Thanks,
SM

1. To find out difference latest date(Key Date for OI Overview) will be taken by comparing with document posted dated. Based on that system shows diffrences
2.   The items are valued using the exchange rate valid at the key date. The
      difference determined in local currency is output and posted. The
      valuation can also be done for parallel local currencies and according to
      different valuation approaches (HGB, GAAP).
      The result of the valuation is required for the creation of the financial
      statements. You should therefore carry out the valuation before the
      grouping of receivables and payables with program SAPF101. The valuation
      difference is then noted in the document. Use the valuation areas to
      calculate a different valuation method, or to save the result for further
      processing activities.
3.   we need to reverse entries .

A few queries regarding the beauty that is Nokia 5...

I got this beautiful lil machine a lil over a week back. It looks lovely, and sounds even better. And even though, being a student/intern, it cost me more than my monthly salary, I am mighty pleased I got it. And despite the opposition before, it's a great hit, both at home and work.
Just a few queries regarding the usage from my experience so far, the answers to which I could not find in this forum and a few other review sites. [Apologies if I'd missed something.]
1- First, the battery. It only lasts for a little over a day on full charge. From what I'd heard and read, it looked like it should last quite a bit a more, atleast 2 full days. The phone even hung up a couple of times, while recording/playing video. Upon which I had to remove and reinsert the battery. How seriously wrong is this ?
2- How do you forcefully exit an application, if need be ? It suggests in the guide, and from the reviews I read, there's supposed to be an exit and a start button with the applications when you bring up the task manager. Where're they?
3- There's this option where you can insert a Slideshow as your Wallpaper. But when I go to it, select the desired images, [ Tried various random images, yes ]it only shows Options and Back button, when select Back, it just goes, well, back. Nothing really happens to the wallpaper. How does that work ?
4- This might seem like a petty issue, but it can be pretty annoying. Once you go to Options and tell it you are marking, e.g. in the Inbox or the File Manager, how do you mark multiple items, WITHOUT having to go to Options >Mark >Mark/Unmark for each item ? What's the point of having a seperate Marking option in the first place then, when I could just Move or Delete each item seperately anyway.
5- And last, any news on a free full version of a document viewer ? From what I looked up, it costs around US$70, which is about a quarter of the phone's purchase price itself. And that's not a modest sum, that too for a basic application such as this, for a anyone with my status.
Just so any prospective buyer or amateur user such as myself doesn't get scared off by the seemingly long list of inquiries, the phone's an absolute pleasure to use. Specially, for someone with their first Touchscreen/Symbian experience. I got this phone after a LOT of research, both online and in the field. And it's bloody well worth it so far.
I know, it's a huge post, but you'd have my utmost gratitude for an accurately detailed response. Thankyou. =)
Solved!
Go to Solution.

Why of course. Something happening to your phone during the process would brick it, not to mention that the attempt would install something in your phone that voids the warranty, meaning that you just made yourself a very expensive paperweight. ^_^. We're not really allowed to talk about it, other than the fact that with the above possibility, I strongly advise you not to do so. There is a way to do it without hacking it. I know of people who have managed to do it without hacking, but it was on the 5800. Hmm, ok, maybe they'll work for you too though.
http://forum.dailymobile.se/index.php/topic,4254.0.html
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Short dump while executing few queries , which has got created on Infoset.

Hi,
We went to BI7.0 upgrade from BW3.x now.
We are getting short dump short dump while executing few queries and work book, which has got created on Infoset.
When i was executing work book where i was geting popup message saying that "Erro ZSD_XST_F00121 is invalid".When i click that message it went to dump.
I was getting this error while executing query on infoset.
We are currently SP Stack 13(Patch level 15).
I found some note 1067918 as per the shortdum,where it is saying that you need to apply SP Stack14(patch level16).
Please some one who had earlier this kind of issue.
I appreciate your answer.

Dear Krish,
Yes, It is the patch problem.
We too faced the same issue on Infosets.
Apply SP 15.
Regards,
Ram.

Upgrading to EHP 4.0 - Have few queries on ESS/MSS, Erecruitment.

Hi,
We are trying to upgrade our portal to EHP 5.0. We have ESS/MSS and few webdynpro java and webdynpro abap applications on the portal. These are the few queries I have
1) ESS services : employee search, personal data, LMS(Webdynpro Java) are on EHP 3 as of now. Will the applications remain the same even if we upgrade to EHP5?
2) ESS travel management(Webdynpro ABAP) are on EHP 2 as of now. Will this application remain the same even if we upgrade to EHP 5?
3) E Recruitment (BSP) is on EHP 3 Will this application remain the same even if we upgrade to EHP 5?
4) We have MSS services: ERec Manager and Appraisal. Will these services affect if we upgrade to EHP 5?
4) We have few custom applications in Webdynpro abap and webdypro java developed on portal. Will these effect if we upgrade to EHP 5?
Thanks.
Regards,
Priyanka.

Hi Eric,
Thanks for your prompt reply.
Can you let me know which version of ESS/MSS and E-Recruitment business packages are applicable for the above version? And are these versions of ESS/MSS available in market now? Otherwise we can suggest our client to go for a upgrade to EHP 4.
Appreciate your input.
Regards,
Priyanka

Few queries regarding J3RFLVMOBVED Report

Hi all,
I have a few queries regarding the J3RFLVMOBVED Report.
First and most inconsequential, the report reads Stock Overview (Russia). So why Russia?
Second, there are two checkboxes in the selection selection screen namely,
Read List from Database
Save List to Database
When I run this report once, it takes about 10 mins to fetch the output. But if I select Read List from Database, I get the result in a matter of few seconds to a couple of minutes.
So obviously I would like to know the secret behind this magic trick.
Also, what does Save List to Database do? Im a little apprehensive of trying this option. Just dont understand what it means. Hence did not try it yet. Does it mean that it is saving to a buffer or to the database as suggested(which I feel is highly unlikely).
I did debug the program. But found it too much to comprehend - pardon my n00biness for that.
If anybody has looked at this report or a similar one, with the above checkboxes, please help me out.
pk
PS: Logging out for the day. Will respond to replies on the morrow.

Hi Amit,
The Documentation for this report can be found either in Tcode J3RFLVMOBVED by clicking on the Blue i button or by going to the report J_3RMOBVED and checking the documentation there.
This part of the documentation is pretty useful:
Options to keep / receive the report from a database.
If the option "Keep report in database" is active our report is kept in the databases table "INDX" with the key "IM". That report can be used operatively for the further analysis.
The storing is possible on two vevels:
on a plant level
on a company code + GL account level
In both cases storing is possible only for one period (month).
Will check out the Notes. Actually services.sap.com has problems opening in my browser. Will have to get that rectified first.
Thanks for the info.
pk
PS: Im on ECC6
Edited by: kishan P on Feb 4, 2009 4:22 PM

Few queries across the BSEG & REGUP tables.

Hi all.
Am hoping that you might be able to assist. I have a dataset that has a few tables from a SAP system & I have been asked to run a few queries across the BSEG & REGUP tables.
I have tried using EBELN, BELNR, AUFNR and REBZG to try and join the two tables but unfortunately these fields are not consistently populated. Is there any other fields that I could use that are common to both tables and should be populated by default ??
Any assistance that could be provided would be appreciated.

Hi Ashutosh Kumar
You can join both table with
                          BUKRS - Company Code
                          BELNR - Accounting Docu. No.
                          GJAHR - Fiscal Year.
                          BSCHL - Posting Key.
                          SAKNR - G/L account number.
Reward Me Points .
Thanks
Pari

Few queries regarding content/web content migration

Hi All,
i have few queries regarding migration of web site and contents (from development to test )which are not clarified after reading oracle docs.
--> When we do site replication will the content be migrated (data files).
--> when we migrate content will all ED and RD etc.(all web site object type be migrated).
--> are both the step necessary for migration when we have to migrate web site.
thanks
-somesh

--> When we do site replication will the content be migrated (data files).It depends how you do it. The "Site Studio Replicator" tool will not move any content, only the site structure. The "Manage Site Replication" page can be used to migrate content with the site structure but I don't recommend it for large sites, I use separate Archiver tasks for moving content. The "Backup and Restore" page stores the entire site in a ZIP file, not advisable for large sites.
--> when we migrate content will all ED and RD etc.(all web site object type be migrated).Yes. It uses the xWebsites metadata field to identify items that belong to the site.
--> are both the step necessary for migration when we have to migrate web site.Depends how you do it, but yes, all bits are required.

KDEmod 4.1: Few queries

Just a few normal queries in KDEmod 4.1
1) How do i change Startup & shutdown sound?
2) I currently use ppp demon to dial my BSNL broadband connection, for which i have use sudo. how to i make it password less?. that is a normal user could dial the network connection. and make a nice clickable shortcut to it.
3) When will i would be able to see native QT4 apps?
Now applications which are intergal part of K Desktop are not in QT4, like Amarok. their about diolog box still says "Build on KDE 3.5".
4) I have installed aspell package but still i don't have system wide spell check. what else i need to do to activate system wide spell check

cool wrote:
Just a few normal queries in KDEmod 4.1
1) How do i change Startup & shutdown sound?
2) I currently use ppp demon to dial my BSNL broadband connection, for which i have use sudo. how to i make it password less?. that is a normal user could dial the network connection. and make a nice clickable shortcut to it.
3) When will i would be able to see native QT4 apps?
Now applications which are intergal part of K Desktop are not in QT4, like Amarok. their about diolog box still says "Build on KDE 3.5".
4) I have installed aspell package but still i don't have system wide spell check. what else i need to do to activate system wide spell check
1: systemsettings
2: visudo --> sudoers file prolly
3: there are working "betas" for most progs:
kdemod-playground/kdemod-playground-amarok2-svn
4: no idea

Few Queries (Basic-Level)

Hi All,
I am having few questions on Basic ABAP Programing
1) Selection Screen:
When i am at selection screen and if i press Cancel, it will take me to the list.For Eg if AT Start of selection, i am selecton data from database and writing to list, so even if user press cancel at selection screen , the query will be executed. How should we handle it?
2) In BDC, what is the exact difference between input session and call transaction. I am able to keep both in sessions and get the logs. I am able to view all the facilities in call transaction that are offered by input session. So, when should we go for waht and what is the exact difference between two.
Regards
Mitesh

Hello Mitesh,
Here are the answers -
1. When you are on the selection screen and hit cancel, the control should not and will not go to the list, unless you have done somthing programmatically to get such a functionality.
As a rule, all the Database selects should happen in the START-OF-SELECTION, just as the name suggests. when you hot Execute on the selection screen, the control will go to start-of-selection.
2. Refer to <a href="http://help.sap.com/saphelp_nw04/helpdata/en/fa/097008543b11d1898e0000e8322d00/frameset.htm">this link</a> in the SAP Library.
Regards,
Anand Mandalika.

A few queries from a new user

I purchased a new Macbook Pro on Friday and i'm very pleased with it. I do have some issues, however, and I hope you can help me please...
MPEG: I had alot of these on my PC, and whilst I got told these formats were not Windows-only, Quicktime and iTunes refuse to play them. Can anyone help me by recommending a plug-in or software that can play them... and I don't like the idea of paying $19.99 for a Quicktime plug-in.
EXE: I assume these are "exclusive" to Windows, but everytime I try to install or run an EXE program, it displays a TextEdit document saying "This Program Cannot Run In DOS Mode". Is there a way I can use EXE files on a Mac or are they only for Windows.
SpellChecker: I'm used to Microsoft Office spellchecking my work, but i'm not used to Mac OSX spellchecking every single thing I type, and it is very irritating if using "chat slang" on instant messengers. How can I disable this?
Safari: This seems to be one of few programs I cannot run fully maximized. Is it possible to do so?
Wireless Connections: My Macbook Pro keeps losing it's connection to my router. My PC and laptop are set to pick up the router's signal whenever it isn't connected. This saves me from having to reconnect everytime I lose my connection. Is there a similar technique I can use on my MBP?
Many thanks
Jay

There is a Mac version of Real Player.
EXE files can not be run on a Mac. Windows and Macs don't use the same operating system. You can install Windows on your Mac, however. See the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Windows Media Player is not fully compatible with Intel Macs. Use Flip4Mac instead. WMP is no longer supported on the Mac by Microsoft.
When you setup your computer initially and created your admin account you should have created a username and password. Did you not do that? You can provide or change the password for your account using the Accounts preferences in System Preferences.
Spell checking is application specific. Go to the Edit menu of the application and look for a Spelling and Grammar item. Use it to turn spell checking on or off.
Open Network preferences, select "Set service order" from the tool menu located to the right of the "+" and "-" buttons. Move the Airport port to the top of the list and your Ethernet port next in the list. Click on the OK button then click on the Apply button. Next select the Airport port from the list and set the Configure drop down menu to DHCP then click on the Apply button. Do the same for the Ethernet port. You can check for other configuration options by clicking on the Advanced button. One such option you should configure for both ports is the Configure IPv6 option. I suggest turning it off.
If you are using any security settings in your router for access to your wireless network, then I recommend configuring the router to use WPA2 and not WEP. This will be more secure and more compatible with the Mac.
Quicktime should play your MPEG files. The files should have an extension of .mpg or .mpeg. Select one of the files and press COMMAND-I to open the Get Info window. In the Open With section select Quicktime Player from the drop down menu then click on the Change All button.

Few Queries regarding Message Size in XI

Hi ,
I have posted the same question before many times over but did not get a satisfactory reply.
I have many file to idoc scenarioes.
Now the file size is large .It is a CSV or a Tab-delimited file.
IT can grow upto 100 mb.
DEV has 4gb of RAM
QA and PRODUCTION have 16 GB of RAM
INTEL DUAL CORE PROCESSOR ON EACH box.
If I want to send a complete 60-100 mb file I run into "LOCK table overflow"
WE have increased the table size parameter on recieving CRM system.
recordset parameter is set for all interfaces from 500 to 5000.
Since I am not able to send a complete file I am breaking it into chunks and sending as I do not have much choice.
For certain interfaces where I am having large number of fields I am able to send only 2000 records per file for others about 14000 records per file.
In order to take care of errors like "LOCK table overflow " and to automate the process I have scheduled a report 'RSARFCEX".Otherwise I'll end up putting one file at a time and wait for it to get processed (i.e. create idocs with status 64 in the recieving system.) and this takes a long time.
I see here on sdn people are able to send a large file in one go.
Even if I try to split a file using xi ..multimapping..extended interface determination...the works et cetra ...It fails for a file of size 6mb.
That too after increasing the no. of work processes.
Besides tried to follow XI tunning parameters ...but there was no change in status-quo.Finally I am using an abap program in xi which is spillting the file (in a matter of few minutes) so that file adapter can pick it up .
I am surprised by xi system's performance .I am not using BPM .There is content conversion on sender side.
Would the experts on the forum please provide a solution.

Hi deepak
Did you check this weblog
/people/alessandro.guarneri/blog/2006/03/05/managing-bulky-flat-messages-with-sap-xi-tunneling-once-again--updated
and this related thread
XML file size
regards
krishna
Message was edited by:
Krishnamoorthy Ramakrishnan

Few Queries in ODI

Hi ,
I am very new to ODI so might be the question would sound silly .
Few Questions:
1. I want to know if there is any way of hardcoding SQL query in ODI for the source.
2. I have 4 total interfaces(LoadEmp,LoadCustomer,LoadProd,LoadFact) . I am bundling them in a package. LoadEmp,LoadCustomer and LoadProd are DimensionLoads and LoadFact is fact which depends on Dimensions to be loaded. I want Dimensions to load parallely and finally once the dimensions are loaded the fact should be loaded. Is there a way in Package I can specify this.
3. I tried to play with Sequences a lot in ODI but was never able to make it hence finally ended up making sequence in Database. I read somewhere a good practise is defining the sequence in Database but if I need to do it in ODI can someone guide me through the method.
Any inputs on these query would be appreaciated.

Thanks a lot for your quick response.
1. I would like to write a simple Select query or a overide query instead of what ODI does . Is it possible ? eg. Select ProductId,ProductDesc from Dim_Product
2. Can you please let me know how can I have parallel sessions using Scenarios. I tried creating Scenarios for 4 Interfaces LoadEmp, LoadCustomer, LoadProd, LoadFact and tried to embed them in a package but there I had to put "Next Step on success" on every scenarios which means it would run sequential. How can I acheive the same without putting the "Next Step on Success" .What I want to achieve is loading all master together ie LoadEmp, LoadCustomer, LoadProd and fact LoadFact once the Master is loaded hence Masters would be parallel and fact would be sequential.
3. I am using Oracle as Database . I know I can have sequences created in Oracle and use it in ODI but I wanted to try the sequence part from ODI hence the query. What I am doing is creating a sequence in ODI and when I do the diagram I have tried executing on target and staging . ODI updates the sequence number only once hence my mapping fails since sequence number is a surrogate key .

Few queries regarding auditing

Hi All ,
Greetings. I have some queries regarding auditing.
1.How to enable auditing for create table and truncate table by a user ?
SQL> audit table by schema_name;
Audit succeeded.Got to know the above from :http://psoug.org/reference/auditing.html
This got succeeded. But when i actually created a table , it did not reflect in the dba_audit_trail;
Do i need to use the action number from here and then combine it with some other table to obtain the create table/truncate table information ?
2. How do i check what all auditing has been enabled so far ?
Please suggest me . I am unable to track auditing for create and truncate.
Regards
Kk

In the above article that I have quoted previously it says to check the dba_audit_trail table.
COLUMN username FORMAT A10
COLUMN owner    FORMAT A10
COLUMN obj_name FORMAT A10
COLUMN extended_timestamp FORMAT A35
SELECT username,
       extended_timestamp,
       owner,
       obj_name,
       action_name
FROM   dba_audit_trail
WHERE owner = 'AUDIT_TEST'
ORDER BY timestamp;
USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00 AUDIT_TEST TEST_TAB   CREATE TABLE
AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00 AUDIT_TEST TEST_TAB   INSERT
AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00 AUDIT_TEST TEST_TAB   UPDATE
AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00 AUDIT_TEST TEST_TAB   SELECT
AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00 AUDIT_TEST TEST_TAB   DELETE
AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00 AUDIT_TEST TEST_TAB   DROP TABLE
6 rows selected.
SQL>Have you reviewed that table?
You can also review the dba_stmt_audit_opts table.
DBA_STMT_AUDIT_OPTS
Edited by: Kerri_Robberts on Jul 15, 2011 3:11 PM

Zen Micro . . a few quer

Hello all, I'm glad to have found the forum. I've been reading through pages and pages . . . my eyes are pretty sore, but most of my issues are resolved, except a few (which I probably overlooked the solutions)By the way, I own a red zen micro, purchased around Oct 27/05, version 3.0.9) When you make a playlist, is there a way to re-order the tracks within the playlist? I've tried pushing shift and all that does for me is highlight more tracks. 2) I've heard about the battery issue and i've tried to read the million pages concerning it, but does anyone know where I could the "update" that I read about in the FAQ that decreases stand-by hours? Which versions already have this downloaded?3) Low Volume Issue. I've also searched for this but haven't found a definite answer. The best I found was from the Nomad site ? <B>Why is the volume low on my Zen?</B>
align=justify>One possible reason for low volume is the European firmware version. To comply with EU regulations the volume from the headphone jack has been reduced. To check if you have the European firmware look for an "e" at the end of the firmware version (Settings > About). To override this download the International firmware for your player from http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=54249&view=by_date _ascending&page=Does anyone know if Creative will ever get these for us for xmas?And sorry to be so bothersome, but if anyone knows offhand .. how come the font can't be highligted in the post box?
Message Edited by samurai36 on -29-2005 09:37 AM

First of all, welcome to the Creative Forums!
. I use Zen Mico Media Explorer ver. 4.00.27 to organize my Micro. I like the simplicity of drag & drop file transfer. In playlists, I arrange tracks by highlighting and dragging them to where I want.
2. I use firmware ver. .. and it's resolved the initial battery drain issue.
3. Low volume? Not on my player at least. When I use it in my car with an FM transmitter, I have the volume almost at maximum. I've made the mistake a few times of forgetting to turn it way down before plugging my headphones in again. Yeee-ouch!!!!
4. I've had my Micro for nearly a year now and except for one tiny scratch that happened when I carelessly put the Zen's Remote into the same case and its metal clasp contacted the screen, it still looks brand new. I use a couple of different cases for it. One is a modified PDA case that I got for a couple of bucks on the discount table at a large electronics store: open and closed.
I also use a small camera case that seals up very well against dust when I'm at work at a sawmill. I use the Zen Micro Remote to control it without having to open the case up.Message Edited by skb on -29-2005 06:3 PM

Few queries in RMAN

Similar Messages

Maybe you are looking for