Few questions about reset to factory settings

Hey!
When you reset your laptop to factory settings (HDD Recovery), does Windows get deleted too? And audio, webcamera etc?
I mean, when you have restarted the laptop, is it ready for use? Can you just use it like normal? Or do you have to install drivers and so on?
I appreciate help.

Hello Elodie and welcome to Toshiba forum.
I will try to offer some answers:
> When you reset your laptop to factory settings (HDD Recovery), does Windows get deleted too?
Generally speaking everything will be deleted. With other words certain partition will be formatted at first and OS (recovery image) will be installed.
> And audio, webcamera etc?
Yes, everything. The whole partition content.
> I mean, when you have restarted the laptop, is it ready for use?
When the recovery image installation is finished after notebook restart it will be ready for use.
> Can you just use it like normal?
Yes.
> Or do you have to install drivers and so on?
Original Toshiba recovery image contains operating system, all necessary drivers, Toshiba specific tools/utilities and some additional software so everything will be installed.
If you have more questions you are welcome. ;)

Similar Messages

IPod touch 4th gen question about restoring to factory settings

I smashed the screen on my sons iPod still working but I bought a new one for him. I synced/backed up the smashed one and then connected the new one to the computer (iTunes) and restored it to the apps photos etc from the old one. We run on wi-fi. Now both iPods are working with all the same stuff on them both have the same apple Id and password and are synced to each ogher. My question is if I restore the old one to factory settings on the actual device will it also restore the new one?? Please help and Thankyou for your time anyone who replies.

No. How you sync one iPod does not affect the other. The same goes for restoring your iPod. It will have no affect on the other one.
B-rock

Few question about reset DatagramChannel

Hello,
Im doing a communication program that uses Selectors with DatagramChannels, and implement bradcast receiving and sending.
I was assigned to create a reset function, that should reset the communication in cases it gets stuck.
When I close the DatagramSocket of the channel, it stays bounded, so I can't create new channel and bind it to the same port.
Im new to this subject so i have some questions:
1. When Im broadcasting, i don't have to connect, only to bind, right?
2. Is there any way to "unbind"?
3. Is it neccessary to do the reset? I mean, can a DatagramCahnnel even get stuck?
Thanks
Udi

When I close the DatagramSocket of the channel, it
stays bounded, so I can't create new channel and bind
it to the same port.Call Selector.selectNow() after closing the DatagramSocketChannel or its DatagramSocket.
1. When Im broadcasting, i don't have to connect,
only to bind, right?Right
2. Is there any way to "unbind"?See above
3. Is it neccessary to do the reset? I mean, can a
DatagramCahnnel even get stuck?No.

Airport extreme setup. Airport express reset to factory settings. Light stays blinking amber. Utility won't recognize

AIrport extreme is setup. Airport express reset to factory settings. Light continues to blink amber. Utility will not recognize express to setup

Thanks. We understand that you want to use the Express to set up a separate wireless network with another modem, is that correct?
Unfortunately, we did not receive an answer to the questions that we asked above and have repeated again below regarding the AirPort Express and AirPort Utility. We asked these questions because not all versions of the AirPort Express are compatible with all versions of AirPort Utility.
What model of AirPort Express do you have? If you are not sure, please locate the model number on the side or bottom of the AirPort Express. It starts with an "A" followed by four numbers. It might be something like A1264 or A1392.
What version of AirPort Utility are you using? If you are not sure, please open AirPort Utility, click on the AirPort Utility menu in the upper left corner of the screen, and then click on About AirPort Utility.

TS4006 I need to erase my ipad and reset to factory settings in order to sell it but it won't do it

I need to erase my ipad and reset to factory settings in order to sell it but it won't allow me to do it and it keeps coming up with a passcode that it won't take either how do I get around this ?

What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My Windows 7 laptop had to be reset to factory settings and iTunes was wiped. I have all my songs and playlists on my iPod. Is there anyway to transfer the songs back over, but storing the number of plays I have and carrying across my playlists too?

My laptop had a few problems and it had to be reset to factory settings. Meaning my iTunes was wiped clean and I had to reinstall it. My previous iTunes (and current iPod nano) has 13 playlists, over 2000 songs and a record of plays going back 2 years (which i would like back since a lot of my playlists are play based).
I've followed guides online, and i've managed to get my songs from my iPod to my computer and thus onto iTunes again. But neither the play count, nor the playlists are transferring with these methods.
Considering when I first bought this laptop I had to redo all my playlists and I KNOW how time consuming and bloody annoying it was I'd rather not do it again.
Is there anyone that can give me a step by step guide of how to do this?
I would GREATLY appreciate this, as at current i'm refusing to sync my iPod again as I am so desperate to cling onto the playlists and plays I have, which means no new songs...
Please help if you can.

The Ipod works fine.
Battery charges regularly with the occasional glitch.
Running iTunes 11.1.1.11
I figured a Nano would probably connect in a simpler way than the touch, but only have a couple computers and cables to test.
I've reinstalled iTunes, but not the full suite, and not all traces. I will attempt this, but I suspect its related to my touch. I was able to connect other iphones to my itunes without issue, using the same cable.

IPod Classic (7th Generation) won't reset to factory settings...

Hi, I have a Apple iPod classic 160 GB Black (7th Generation). I had tried to sync it to my MacBook Pro, which the iPod was set up with, will not show up in iTunes. I will get an error message "The iPod "iPod" could not be restored because it could not be found." Then I'll get another error message "iTunes cannot read the contents of the iPod " Chris' Classic 160 iPod." Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings." When I go to "About this iPod" it shows that there are no songs, movies, photos, podcasts or contacts. There are four games loaded on the iPod. But, it shows 41.5 GB used and 107 GB free.
This is what I have done up to this point:
Disconnect and reconnect your iPod to iTunes, and then attempt to restore or update the iPod again. Also, I've tried other USB cords.
Restart your computer and then attempt to restore or update the iPod again.
Try connecting your iPod to a different USB port, and then attempt to restore or update the iPod again. Connecting to a USB 2.0 port is recommended. For Windows computers, refer to Identifying USB 2.0 ports on your computer for instructions.
Remove any USB devices not manufactured by Apple that you have connected to your computer (it is not necessary to remove your keyboard or mouse). Then, attempt to restore or update the iPod again.
Update to the latest version of iTunes, and then attempt to restore or update the iPod again.
How do I clear out that 41.5 GB from the iPod? What can I do to reset the factory settings on the iPod?

Do the iPod disk diagnostic on your iPod, as in this excellent earlier post by tt2.
It wont fix your problem, but help us in troubleshooting.
then, Use Disk Utility->FirstAid->Repair ( may take 30 minutes )
Failing that Disk Utility -> Erase
This will reformat the iPod ( try using FAT32, instaed of HFS+) may take 4 hours.

EBS 12.1.3: a few questions about cloning

Hi,
We have EBS 12.1.3 on AIX 7.1.
A few questions about cloning from shared application tier environment to non-shared application tier environment. We have been following "Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]"
Source environment (shared app tier):
- Two active application nodes and LB
- One active database and one passive database setup with Oracle Data Guard.
- SSL termination at the load balancer
- PCP implemented
Target environment (non-shared app tier):
- One active application node
- One active database node
- No SSL
- No PCP
After the cloning was completed we noticed the following problems in the target system:
1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
Thanks for your answers in advance.
BR,
TH

1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?No, you need to edit the context file manually and run AutoConfig.
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?You are following the best approach. You could update the node details from the backend if you want.
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?By default, Rapid Clone will create the target database in noarchivelog mode.
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? Correct.
What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?You can copy the application tier node files while the application is up. And, you do not need to shutdown the application to run "Maintain Snapshot Information".
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
If it is working from one browser, then it should not be an EM issue. Have you tried from a different client and see if this works? Have you changed any setting in your IE browser? Please make sure you add the EM URL to the trusted sites list.
Thanks,
Hussein

Cannot reset to factory settings

I have an HP Touchsmart 270. Somehow no apps are showing the computer (it is like they have been erased). I wanted to reset to factory settings. However, when I click on 'settings' then click on 'change pc settings' the screen just goes blank. How do I proceed? When I search for apps, it show "no apps found" and it will not let me go to the store. If I click on show all apps it shows a blue screen.
Help!

Hello tawakoni_marina,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to restore your computer back to factory settings. By the sound of it you are running either Windows 8 or Windows 8.1, either way the HP Support document: Performing an HP System Recovery (Windows 8) will walk you through the process of restoring the computer to the factory settings.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Performing reset to factory settings iphone 4 ios v6.0

I have an iPhone 4 running ios 6.0. I performed a reset to factory settings and selected reset all and my phone started notifying me of sms I have already received, so I reset all content. My phone"s status is "no service" and the screen is prompting me to connect to itunes or wifi. I suspect my phone is jailbroken without me knowing about it. Shouldn't I be able to reset the phone back to factory settings without tether?

That's the new normal for an iPhone straight from the box. It's called the Setup Assistant. The Setup Assistant steps an iPhone user through the setup process, including connecting to a Wi-Fi network, signing in with or creating a free Apple ID, setting up iCloud, turning on recommended features such as Location Services and Find My iPhone, and activating iPhone with a carrier.
Just turn the phone off without going through the Setup.

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?

Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

IPhone 4s update was interrupted and message said phone had to be reset to factory settings. Lost all photos from phone in process of transferring to pc. Copy of my backup overroad that phone and all the old data and photos are gone.

My boyfriend and I share an iTunes account. I just tried to update his phone and during the update an error message occurred saying that his phone had to be reset to factory settings. It said it was an un setup phone and needed plugged in to iTunes. With no other choice, we had to select reset to factory settings. Now, my phone backup through iCloud downloaded onto his and all of his contacts and photos were overridden by mine. His photos were in process of transferring from the phone to the pc while this occurred and over 900 of them were complete when this happened. They don't show up on the pc now either since the sycn wasn't finished. Is there a way to get them back? When we plug his phone in now it shows my name instead of his so I'm not sure how to get to an old version of his backups even.

Error -1 indicates a hardware issue with the device.
Read here > http://support.apple.com/kb/TS3694
The device should still have warranty but unfortunately any service needs to be done in the US.
Warranty check > https://selfsolve.apple.com/agreementWarrantyDynamic.do
Is it possible for you to send the device home and have a family member take it to the Apple Store?

Why wouldn't my iPod Have a reset option to reset to factory settings I believe I received a display iPod it came with games you can't play if you click on them it says for demonstration only and I can not download any apps or games wth do I do

i bought this 3 months ago didn't open it or anything I know big idiot but it was for my daughters bday today she opens it and stuck to the back of it was a yellow sticker saying display model. What..... Ok so we charge it she can't wait to download her little grs and play and nope it won't let me download any apps or games so I tried to sync it with her brothers and no it won't so I google it to find out how to reset to factory settings looked so easy should have known I go to settings then general and yep no reset option so I try the iTunes thing with the laptop nope didn't work I am ready to try the hammer you know where you continually beat the darn thing till you feel better ugh please any suggestions would be so appreciated

You should be able to force it into recovery mode and restore it. Provided, that is, that it's not also activation locked. If there's an iCloud account set up on it with Find my iPod enabled, you're pretty much hosed.
You may want to try contacting Amazon to see if you can return it. Was it actually sold by Amazon, or by a 3rd party? Amazon is getting to be as bad as eBay any more with all the 3rd party sellers.
Amazon is NOT an authorized source for any Apple products. What you got was, as you have already figured out, a demo model. It was probably either liquidated along with the rest of the inventory from a brick and mortar retailer that went bust or possibly even stolen.

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Few questions about reset to factory settings

Similar Messages

Maybe you are looking for