Few seconds into a skype call the tv reboots
I have a SONY Bravia Internet TV where when I use SKYPE I am into a call and few seconds later the tv rboots and starts all over again. Am not able to figure out why. When doing a test with Skype Testing center it works alright. Please help.
flitzpaal wrote:
[Removed for privacy] wrote:
I also have this problem after using skype on the same tv for over a year without any problems.
In the past fortnight, it connects, and 3-5 seconds into the video call shuts down the skype app, and returns to the tv program. happens repetitively.
SONY TV KDL 40NX720
Software version - PKG4.022GAA-0104 (which is current version)
Appreciate any thoughts, or assistance.
M
I seem to have cured the problem by going into the history tab of the TV's Skype app and deleting every single entry. Unfortunately I have not discovered any way to delete all history entries in one go, nor to stop the app recording future history events, so now I just delete the events after every few calls. Since I did this, my Skype calls have worked fine. Hope this helps.
A belated thanks for your suggestion as it fixes the problem. I notice it does reoccur if there is an unread message, but deleting that entry fixes the problem again.
Thanks very much.
Michael
Similar Messages
-
My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?
My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?
-
I am in recovery mode with my ipad, and a few seconds into the upload, i get an error message 3259. What does this mean?
see these for some suggestions.
http://support.apple.com/kb/ts2799
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
This is mosat likely firewall or security related - soething is blocking you connection., -
I recently started running and downloaded the Couch to 5K webcasts, while running how do I get my podcast to play one song in it's entirety and move to the next and not skip to the next after a few seconds into the song? I beleive it's the motion of the running that is causing it, is there a setting I need to change?
Hello nowrunning,
Is the "Shake to Shuffle" option turned on in your iPod's settings? To check, head to Settings -> Music -> Shake to Shuffle and make sure it is set to Off.
B-rock -
When I am composing an email in Mail it keeps saving a copy every few seconds into the Trash bin, quite annoying and I cannot find anyway to prevent it. Any ideas anyone?
Thank you in advance for those who give help.From the Mail menu bar, select
Mail ▹ Preferences... ▹ Accounts ▹ Mailbox Behaviors
and uncheck the box marked
Store draft messages on the server -
I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down
Just found the answer - if you have the sam problem look here for the answer:
https://discussions.apple.com/thread/5769424?tstart=0 -
My computer is constantly reloading the internet pages every few seconds. Also goes to the color swirl to think often. What is wrong? Thank you.
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?
You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
IChat disconnects after a few seconds and starts to blink the whole screen
iChat disconnects after a few seconds and starts to blink the whole screen
this started since I installed Leopard; if I go back to 10.4 it works OK. I got rid of all the plist and it still hangs up. How can I uninstall this. On my laptop it works OK but I installed it with complete erase on laptop; on my desktop I stalled it over the old system.
error message AIM time out An AIM service error occurred.
Error: Serv:RequestTimeout
and you have attemptedto log too often in a short period of time. wait a few minutes before trying to login in again.
EVEN THOUGH I ONLY TRIED ONCE TO LOG IN.If you Archived and Installed then check iChat launches from the Applications Folder.
If it does that Drag the current (iChat 3) icon off the DOCK and drag iChat 4 to the DOCK.
8:03 PM Tuesday; December 4, 2007 -
I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.
I don't know which country you're in, but in the US, carriers limit the amount of download for a single file when using 3G. Have you tried wifi?
-
My macbook isn't charging continuously. It goes between 'charging' to 'not charging' every few seconds. What could be the problem?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Have you checked the connections from the power adapter to the MBP? Note the pins in the power adapter are spring loaded. See if they are free. Are the connections discolored?
Have you checked the battery status? Open System Profiler or System Information and look at this display:
Post a copy of yours.
Ciao. -
When I play videos or TV shows on itunes for my PC, a black screen comes up and there's sound for a few seconds, but it stops and the counter skips to -11...
Welcome to Apple Discussions!
Does this happen with all videos?
Do purchased songs play fine on your iPod?
Does the sample video here (for the iPod) work?
Quicktime: Sample Files
Is the software on your computer and iPod up to date?
iTunes
iPod Updater
Update iPod's Software
Have you tried the Five Rs
btabz -
my IPad4 cannot load the
os. it keeps trying but always crashes out after displaying the apple logo for a few seconds. it keeps cycling in the effort to start but without success.my IPad4 cannot load the
os. it keeps trying but always crashes out after displaying the apple logo for a few seconds. it keeps cycling in the effort to start but without success. -
My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!
If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues.
Maybe you are looking for
-
View more than one sheet at a time from the same file?
I'm trying to view two different sheets at the same time from one file. This was possible in excel by opening a "new" window. Does anyone know how to do this in numbers? Thanks for the help,
-
Can not see the option Execution with Data Change in the infoprovider?
Hi team, i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report i can not see the option "Execution with Data Change in the infoprovider", i can only see 2 options Direct scheduling in background process creat
-
Adobe Application Manager hangs on installation, can't download any CC
I just upgraded from CS 5.5 to Creative Cloud (I'm running OSX 10.6.8). When I try to download the programs from the "apps" page of creative.adobe.com, the download manager opens and then hangs on the "updating Adobe Application Manager" screen for s
-
sync problem, cannot sync apps to iPhone from iTunes. i did it before. but now it just take backup. anyone plz help...
-
Plist strings to UILabel: formatting specific words in the text?
Developers, I have a UILable populated by a plist string. I would like the UILabel to display text, with specific words in bold format. I have looked around for a solution to this problem, but I haven't found anything useful on the net. Is this possi