FF 3.6.13 not rendering css horizontal parameters correctly in one Profile but DOES in another (second account on same machine).

This one's got me completely stumped. Web site coding is "fluid", not fixed width. Screen resolution is 1024px x 768 but the maximum width shown is only slighly over 900px, which of course renders the site's header incorrectly (width is approx. 950px).
The SAME site, when viewed within another user account on this machine, renders properly... As it was designed, with no problem. Renders properly in other browsers AND FF3.6.13 on two different Ubuntu boxes.
This problem began well AFTER the initial update/upgrade to 3.6.13 on a WinXP box... Was working just fine up until today.
Is there a setting within the "Profile" that needs to change?
CSS file validates - HTML Validates - limited javascript - PHP Pages - Cache cleared
I have the Very Same page on a L.A.M.P. server (intrAnet server) used for development and it renders PERFECTLY (in ALL browsers).
Since this problem just began, and other sites and other users on this machine have no problem, it seems logical the problem may lie in my "Profile" settings... Need Some Direction
Thanks in advance!

From my original message:
'''''(i.e. when I double-click a PNG file in Windows Explorer, it opens in the Microsoft RAW Image Viewer... I got the desired command from the File Types tab in Windows Explorer's Tools->Folder Options).'''''
So, apparently either english is not your first language, or you didn't bother reading my post and answered strictly by the Subject... Because the "Windows Picture and Fax Viewer" (as it was formerly called; now it's called the '''Microsoft RAW Image Viewer''') is '''already''' the default viewer for PNG files in Windows. See attached image.
Thanks.

Similar Messages

Safari not rendering CSS and javascript correctly

There seems to be a bug in Safari when dealing with CSS display property and javascript.
I've created a form that hides certain fields when the right circumstances are met, those fields become visible. However, when they become visible, through the use of javascript, they don't display in the flow of the document. For example:
[field 1]
[field 2]
[field 3]
Assume that [field 2] is hidden on initial page load. And when [field 1] is clicked, then [field 2] should appear and it should appear after [field 1]. Safari, however, displays [field 2] above [field 1] and strips it of any styles. I spent 2 hours trying to figure out what I was doing wrong, but it turns out I wasn't doing anything wrong. It's Safari that can't render this correctly because when I test it in Firefox it works fine. Just as I expected it to. I hope this gets fixed in the next update.
If anyone has any explanation or solutions or reasons for this peculiar anomaly please tell me.

If you have not done so already, make sure you also tell Apple by using the Bug Reporting item in the Safari menu.

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT204053 Can I set up two iCloud accounts on my IPAD3 at the same time? If not how do you sign out of one to sign in to another?

Can I set up two iCloud accounts on my IPAD3 at the same time? If not how do you sign out of one to sign in to another?

Welcome to the Apple community.
You can add more than one account to your iPad, but you can only have one primary account. Secondary accounts which you can add at settings> mail, contacts, calendars do not have all the features of a primary account such as photo stream.

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.

CL_WD_RUNTIME_SERVICES= ATTACH_FILE_TO_RESPONSE( ) works in one system but does not in other

Hi folks,
We are facing an issue here with a custom web dynpro application that export an excel. The following piece of code has been written in this application to export an excel:
cl_wd_runtime_services=>attach_file_to_response(
       EXPORTING
         i_filename      = c_filename
         i_content       = xtext
         i_mime_type     = c_mimetype
         i_in_new_window = abap_false
         i_inplace       = abap_false ).
Now, the issue is this - it works fine in one system but does not in other system. HttpWatch shows ERROR_HTTP_INVALID_SERVER_RESPONSE in the system where it does not work. Any ideas?
Regards,
Shiromani

Hi Shiromani,
You mean "Other System" is other PC. If so, it seems that there is an issue with browser
Please check the below SAP note
1679126 - Server sends timeouts that cannot be reproduced
Also, compare the browsers versions in both systems.
Regards,
Rama

Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
I see problem:
I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
Anyone have ideas on what the issue could be? Thanks!
Some Info:
MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
Mac OS 10.8.3
Audition CS6 5.0.2 Build 5
and reply:
Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting. If that fails, we can continue troubleshooting.
I have the same problem as the author writes. But these actions do not help

Unfortunately I believe that requires purchasing the new version, and I do
not have budget approval for such a purchase.
On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

IPod not recognised on one computer but OK on another

I manage a number of iPod nanos for my children on my PC (vista). In the last few days, one of them (pink nano)is not recognised by windows nor therefore in iTunes. I tried by 60GB iPod and had same problem. Plugged in my blue nano and works perfectly.
Tried pink nano on my laptop (xp) and works perfectly.
Using latest version of iTunes and PC fully updated.
On PC, pink nano does not appear under USB controllers, but under Other Devices as Apple iPod USB device (with exclamation mark). The device status is: The drivers for this device are not installed. (Code 28)
Can anybody shed any light on this please?

If you have more then one USB port, try the other port.

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Favicon does not appear when accessing a site via an alias but does if you use the actual host location?

We have created a new website and are hosting the website on the Shaw server. The address is generically www.members.shaw.ca/member/directory.
We created a website address for our association by registering our domain address - something like www.associationXYZ.ca
The domain registration folks have redirected our domain address to the hosting location address.
The favicon can be seen under Tools->Page Info->Media but does not appear beside the bookmark entry?

The redirect address is www.northsaanichresidentsassociation.ca
From other info on this subject the problem may be related to the type of redirection and/or missing script to handle the redirection.

Every time i connect my car charger for ipad it says not charging and i tried more than one charger but they all say the same thing is there something wrong with my ipad?

My ipad doesnt want to charge in the car charger

What are the electrical specs of the car charger? The Apple wall charger is rated at 5V and 2A. If the car charger does not output 2A @5V, you'll get the not charging message. However, it will still charge, but very slowly.
 Cheers, Tom

Win8.1 hard drive will not load in one computer but will in another

I have a HP s3707c (product FQ578AA-ABA, Software build 91NAv6PrA1). Win8.1. This computer got stuck in the "preparing automatic repair" loop and will not start windows. It freezes with the windows icon showing and no spinning circle of dots appear. I made a recovery USB and it will not start from it either. I thought that it might be a hard drive problem (or software), but the HP diagnostic test from hitting F9 on start up indicate that everything passes. I have a second computer that is the same type, so I took the hard drive out of the computer having problems and put it in the one that is not having problems. It started up just fine. I put the hard drive from the good computer into the one having problems and it still would not start up windows from the drve or from the recovery disk. Any suggestion on how I should proceed diagnosing the problem on this machine not starting up windows?

Hello D1P. I understand that the hard drive will work on one computer, but not another one. I do have to point out that the computer you pointed out (FQ578AA), does not have Windows 8.1 drivers, as indicated here. You should reference this document for more information: What if I don't see my operating system.
If you are interested in troubleshooting the issue under this environment, you can test the computer for hardware failures. If there is an error, this indicates that the computer could have a hardware failure. Otherwise, you are likely facing a compatibility issue.
Please let me know the results of you troubleshooting. Thanks for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

FF 3.6.13 not rendering css horizontal parameters correctly in one Profile but DOES in another (second account on same machine).

Similar Messages

Maybe you are looking for