FF-6 is not working for Bank statement View
Hi SAP Friends,
Could you please tell me how we need to print the bank statement in FF_6,
I have given then application type as 0001 and i have given the all the house bank and statement number and date, But i am not getting any statement in FF_6.
I am getting the error like LIST CONTAINS NO DATA.
Please suggest the same.
Regards,
Anand Y
Hello,
Give application as 0001
Do not give any other things
Just give statement number from 1 to 9999
then give 01 for GL and 02 for bank sub ledger
You will get it.
This is only problem in the selection parameters. If you correct the selection parameters surely you will get the statement.
Regards,
Ravi
Similar Messages
-
Table Maintenance(SM30) not working for a custom View..
Hi,
I have the below case which is not working at the moment.
we have standard table T024 and the requirement is to update the table directly in production. To update the standard table i have created a custom maintenance view on this table and created a table maintenance generator for custom view.
In maintenace status tab of view i have maintened below information:
Access read, change, delete and insert
Delivery class A
Data Browser/Table View Maint. Display/ Maintenance allowed
The table maintenace generator has been also created but when trying to modify it is giving below message
"Client 210 has status 'not modifiable"
We have two clients in dev server 200 -for development
210 - for development testing
In development it is working but in development testing client and in quality it is not working.
Can you please help me as to why we are getting the above message?
Best Regards,
RajeshHi Rajesh,
That is coming because of the Table Maintainance Generator Settings. You have to chose no, or user, recording routine then system will not generate any request and you can update the data. This is actually a BASIS settings in SCC4, so that for customizing tables system should not generate any request.
Thanks & Regards,
Faheem. -
Export to powerpoint not working for certain views
Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. ThomasHi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas -
Just bought two new iPhone 6 plus phones. Cannot get the email to load on my husbands phone for his work. He works for the state and I don't know if that is the issue or not. Any suggestions?
Your husband should contact his IT department at work to find out if he is allowed to set up his work email on his personal device and if so, how to do it.
-
Cascading Select Lists - Not Working for me
I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='"DELETE_CONFIRM_MSG"';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
select state_code || ' - ' || state_desc d, state_code r
from tbk_state
where country_code = :P6_COUNTRY_CODE
order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='Would you like to perform this delete action?';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti -
Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
Same configs on SW, WLC and ACS.
Debug on WLC gives..below message when Tacacs is attempted..
*aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
(wlc03) >show tacacs auth statistics
Authentication Servers:
Server Index..................................... 1
Server Address................................... 10.3.121.21
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
Server Index..................................... 2
--More-- or (q)uit
Server Address................................... 10.3.121.22
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
(wlc03) >show tacacs summary
Authentication Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 5
2 10.3.121.22 49 Enabled 5
Authorization Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 30
2 10.3.121.22 49 Enabled 5
Accounting Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 5
We can ping the TACACS servers...>show memory statistics
System Memory Statistics:
Total System Memory............: 1028820992 bytes
Used System Memory.............: 458424320 bytes
Free System Memory.............: 570396672 bytes
Bytes allocated from RTOS......: 21939008 bytes
Chunks Free....................: 29 bytes
Number of mmapped regions......: 45
Total space in mmapped regions.: 212779008 bytes
Total allocated space..........: 12015112 bytes
Total non-inuse space..........: 9923896 bytes
Top-most releasable space......: 133800 bytes
Total allocated (incl mmap)....: 234718016 bytes
Total used (incl mmap).........: 224794120 bytes
Total free (incl mmap).........: 9923896 bytes
show buffers
Pool[00]: 16 byte chunks
chunks in pool: 50000
chunks in use: 19030
bytes in use: 304480
bytes requested: 90479 (214001 overhead bytes)
Pool[01]: 64 byte chunks
chunks in pool: 40000
chunks in use: 14519
bytes in use: 929216
bytes requested: 566395 (362821 overhead bytes)
Pool[02]: 128 byte chunks
chunks in pool: 20000
chunks in use: 7726
bytes in use: 988928
bytes requested: 672853 (316075 overhead bytes)
Pool[03]: 256 byte chunks
chunks in pool: 4000
chunks in use: 808
bytes in use: 206848
bytes requested: 154777 (52071 overhead bytes)
Pool[04]: 1024 byte chunks
--More-- or (q)uit
chunks in pool: 15300
chunks in use: 11645
bytes in use: 11924480
bytes requested: 4945714 (6978766 overhead bytes)
Pool[05]: 2048 byte chunks
chunks in pool: 1000
chunks in use: 189
bytes in use: 387072
bytes requested: 355272 (31800 overhead bytes)
Pool[06]: 4096 byte chunks
chunks in pool: 1000
chunks in use: 36
bytes in use: 147456
bytes requested: 102479 (44977 overhead bytes)
Raw Pool:
chunks in use: 186
bytes requested: 156052303
show process memory
Name Priority BytesInUse BlocksInUse Reaper
cslStoreManager (240/ 7) 0 0 ( 0/ 0)%
System Reset Task (240/ 7) 0 0 ( 0/ 0)%
reaperWatcher ( 3/ 96) 0 0 ( 0/ 0)% I
osapiReaper ( 10/ 94) 0 0 ( 0/ 0)% I
TempStatus (240/ 7) 424 1 ( 0/ 0)% I
pktDebugSocketTask (255/ 1) 0 0 ( 0/ 0)%
LICENSE AGENT (240/ 7) 2228 85 ( 0/ 0)% I
emWeb ( 7/ 95) 1235795 20743 ( 0/ 0)% T 300
webJavaTask (240/ 7) 0 0 ( 0/ 0)%
fmcHsTask (100/ 60) 0 0 ( 0/ 0)%
apstatEngineTask (240/ 7) 0 0 ( 0/ 0)%
rrcEngineTask (240/ 7) 0 0 ( 0/ 0)%
spectrumDataTask (255/ 1) 1614480 12 ( 0/ 0)%
spectrumNMSPTask (255/ 1) 28808 3 ( 0/ 0)%
wipsTask (240/ 7) 0 0 ( 0/ 0)%
tsmTask (255/ 1) 0 0 ( 0/ 0)%
cids-cl Task (240/ 7) 0 0 ( 0/ 0)%
ethoipSocketTask ( 7/ 95) 0 0 ( 0/ 0)%
ethoipOsapiMsgRcv (240/ 7) 0 0 ( 0/ 0)%
--More-- or (q)uit
envCtrollerStatus (240/ 7) 0 0 ( 0/ 0)%
rfidTask (240/ 7) 0 0 ( 0/ 0)%
idsTrackEventTask (239/ 8) 0 0 ( 0/ 0)%
DHCP Server (240/ 7) 0 0 ( 0/ 0)%
bcastReceiveTask (240/ 7) 0 0 ( 0/ 0)%
ProcessLoggingTask (240/ 7) 0 0 ( 0/ 0)%
CDP Main (240/ 7) 3100 13 ( 0/ 0)%
sntpMainTask (240/ 7) 0 0 ( 0/ 0)%
sntpReceiveTask (240/ 7) 0 0 ( 0/ 0)%
cdpSocketTask (240/ 7) 0 0 ( 0/ 0)%
grouping Task (255/ 1) 0 0 ( 0/ 0)%
dot11a (255/ 1) 63 3 ( 0/ 0)%
rrm Socket Task ( 1/ 97) 35024 1 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
dot11a (255/ 1) 0 0 ( 0/ 0)%
grouping Task (255/ 1) 0 0 ( 0/ 0)%
dot11b (255/ 1) 105 5 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
dot11b (255/ 1) 0 0 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
apfPmkCacheTimer (240/ 7) 0 0 ( 0/ 0)%
Apf Guest (240/ 7) 0 0 ( 0/ 0)%
RLDP Schedule Task (240/ 7) 0 0 ( 0/ 0)%
--More-- or (q)uit
apfMsConnTask_5 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_4 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_6 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_7 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_3 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_2 (175/ 32) 0 0 ( 0/ 0)%
apfLbsTask (240/ 7) 0 0 ( 0/ 0)%
apfMsConnTask_0 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_1 (175/ 32) 0 0 ( 0/ 0)%
apfProbeThread (200/ 22) 0 0 ( 0/ 0)%
apfOrphanSocketTas (240/ 7) 0 0 ( 0/ 0)%
apfRogueDetectorTh (175/ 32) 0 0 ( 0/ 0)%
apfRogueTask (240/ 7) 0 0 ( 0/ 0)%
apfOpenDtlSocket (175/ 32) 0 0 ( 0/ 0)%
apfRLDP (175/ 32) 424 1 ( 0/ 0)%
apfRLDPRecv (175/ 32) 0 0 ( 0/ 0)%
apfReceiveTask (175/ 32) 0 0 ( 0/ 0)%
mmMfpTask (175/ 32) 0 0 ( 0/ 0)%
mmMobility (240/ 7) 1272 3 ( 0/ 0)%
mmSSHPeerRegister (240/ 7) 0 0 ( 0/ 0)%
mmListen (180/ 30) 99920 227 ( 0/ 0)%
tplusTransportThre (201/ 22) 0 0 ( 0/ 0)%
radiusCoASupportTr (201/ 22) 0 0 ( 0/ 0)%
--More-- or (q)uit
EAP Framework (240/ 7) 0 0 ( 0/ 0)%
aaaQueueReader (225/ 13) 3518 12 ( 0/ 0)%
radiusRFC3576Trans (201/ 22) 0 0 ( 0/ 0)%
radiusTransportThr (201/ 22) 0 0 ( 0/ 0)%
pemReceiveTask (240/ 7) 0 0 ( 0/ 0)%
iappSocketTask (240/ 7) 0 0 ( 0/ 0)%
ccxRmTask (230/ 11) 0 0 ( 0/ 0)%
ccxS69Task (240/ 7) 424 1 ( 0/ 0)%
ccxDiagTask (240/ 7) 0 0 ( 0/ 0)%
ccxL2RoamTask (240/ 7) 240424 3 ( 0/ 0)%
dot1xSocketTask (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_7 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_6 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_2 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_3 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_4 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_5 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_1 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_0 (240/ 7) 424 1 ( 0/ 0)%
dot1xMsgTask (240/ 7) 0 0 ( 0/ 0)%
locpTxServerTask (220/ 15) 408 2 ( 0/ 0)%
locpRxServerTask (200/ 22) 428043 1961 ( 0/ 0)%
capwapSocketTask ( 72/ 70) 303104 148 ( 0/ 0)%
--More-- or (q)uit
spamApTask6 (118/ 53) 25929 63 ( 0/ 0)%
spamApTask7 ( 53/ 78) 24233 59 ( 0/ 0)%
spamApTask5 (118/ 53) 23445 61 ( 0/ 0)%
spamApTask4 (118/ 53) 23513 58 ( 0/ 0)%
spamApTask3 (118/ 53) 19569 48 ( 0/ 0)%
spamApTask2 ( 53/ 78) 23809 58 ( 0/ 0)%
spamApTask1 ( 53/ 78) 22961 56 ( 0/ 0)%
spamApTask0 ( 78/ 68) 39189 106 ( 0/ 0)%
spamReceiveTask (120/ 52) 2204024 252 ( 0/ 0)%
spamSocketTask ( 32/ 85) 0 0 ( 0/ 0)%
Image License brok (240/ 7) 0 0 ( 0/ 0)% I
Image License brok (240/ 7) 28 1 ( 0/ 0)% I
IPC Main Thread (240/ 7) 0 0 ( 0/ 0)% I
License Client Lib (240/ 7) 96 1 ( 0/ 0)% I
sshpmLscScepTask (100/ 60) 0 0 ( 0/ 0)%
License Client Lib (240/ 7) 96 1 ( 0/ 0)% I
sshpmLscTask (100/ 60) 25783 1739 ( 0/ 0)%
sshpmReceiveTask (175/ 32) 6697 66 ( 0/ 0)%
sshpmMainTask (100/ 60) 208440 358 ( 0/ 0)%
mfpKeyRefreshTask (255/ 1) 0 0 ( 0/ 0)%
mfpEventTask (255/ 1) 0 0 ( 0/ 0)%
mfpTrapForwardTask (255/ 1) 0 0 ( 0/ 0)%
clientTroubleShoot (100/ 60) 2841248 4 ( 0/ 0)%
--More-- or (q)uit
loggerMainTask (200/ 22) 0 0 ( 0/ 0)%
debugMainTask (200/ 22) 0 0 ( 0/ 0)%
dot3ad_lac_task (240/ 7) 32901 3 ( 0/ 0)%
gccp_t (240/ 7) 5864 5 ( 0/ 0)%
dot1dTimer (240/ 7) 0 0 ( 0/ 0)% T 300
dot1dRecv (250/ 3) 0 0 ( 0/ 0)%
uart_session (240/ 7) 0 0 ( 0/ 0)%
StatsTask (240/ 7) 0 0 ( 0/ 0)%
fdbTask (240/ 7) 0 0 ( 0/ 0)%
broffu_SocketRecei (100/ 60) 13 1 ( 0/ 0)%
SNMPProcMon (240/ 7) 0 0 ( 0/ 0)% T 300
RMONTask ( 71/ 71) 0 0 ( 0/ 0)% I
SNMPTask (240/ 7) 61089 1064 ( 0/ 0)%
DHCP Socket Task (240/ 7) 0 0 ( 0/ 0)%
DHCP Proxy Task (240/ 7) 0 0 ( 0/ 0)%
dhcpClientTimerTas (240/ 7) 0 0 ( 0/ 0)%
DHCP Client Task (240/ 7) 0 0 ( 0/ 0)% T 600
BootP (240/ 7) 0 0 ( 0/ 0)% T 300
TransferTask (240/ 7) 848 2 ( 0/ 0)% I
osapiTimer (100/ 60) 13024 2 ( 0/ 0)% T 300
nim_t (100/ 60) 2447 3 ( 0/ 0)%
dtlArpTask ( 7/ 95) 98436 3 ( 0/ 0)%
dtlTask (100/ 60) 41089 20 ( 0/ 0)%
--More-- or (q)uit
dtlDataLowTask ( 7/ 95) 0 0 ( 0/ 0)%
sysapiprintf (240/ 7) 22657 3 ( 0/ 0)%
osapiBsnTimer ( 95/ 62) 0 0 ( 0/ 0)%
fp_main_task (240/ 7) 153068796 26868 ( 0/ 0)% -
Document Sequence Information Does not Exist for Bank Account
Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank youAdith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan -
Triger extract is not working for USERDETAILS object.
Dear MI experts,
I am doing custom client integration. In that we have faced a problem.
Trigger extract is not working for USERDETAILS object in SWCV SAP BASIS 7.10.
1. I have assign the SWCV SAP BASIS 7.10, user define SWCV to device.
2. I have checked the SMQR all queues(extract queues) are in register mode.
But if I delete the users and reassign the same user, then it is sending deletes and insert to the outbound queue.
please help to resolve the issue.
Regards
lakshman balanguDear ananth,
Thanks for ur replay.
Actually as soon as the device is registered, automatically the USERDETAILS and USER_AUTHORIZATION Objects should
go to the Outbound queue from the pending extract
I have tried what you have suggested.
1.I have taken device which is in initial state and I have assigned the 'user' and 'user define SWCV'.
2.I have register the devices with my custom client. After that also SWCV SAP BASICS 7.10 not become operational and automatic extract not happend for USERDETAILS.
my doubt is, any thing i need to send from client to make SWCV SAP BASICS 7.10 operational?
(or) is it problem with system?
Regards
lakshman balanagu -
Drill down is not working for Pivot tables,but working for chart
I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu -
MDX -Children count function Not working in Case statement
Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
SantoshHi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support -
SM36/37: Specification "After Job" does not work for Daily "periodcity"
I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
LaraPlease close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity"; -
I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?
Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.
-
IPhone 6 External Mic not working for Siri/Dictation
I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
DougHi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.
-
CALLER ID not working for International incoming calls
Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype. -
Select All in a table does not work for Drag and Drop
Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-EdFrank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed
Maybe you are looking for
-
ADF Task Flow Binding - Refresh ifNeeded being invoked even WITHOUT any Parameter change
Using JDeveloper 11.1.1.6.0 Issue: Task Flow Binding property "refresh = ifNeeded" seems to be triggered even without the mutation of the input parameter. As per definition, "ifNeeded: refresh the ADF Region if the value of a task flow binding parame
-
I have and older (non-dual band) Time Capsule and I want to reformat to extended journaled so I can use it for transferring Aperture 3.0 projects. I dimly recall using FAT32 format when I first got it (don't ask). However, the time capsule is not app
-
I bank on line and tried to run a copy of my latest statement. It was placed on the screen horizonally instead of vertical and freezes the screen when I try to print it. My bank told me the Adobe was responsible for this situation and they could n
-
Photoshop CS4 picture wrong if not zoomed to really big
sorry if there is a topic already ive googled and looked and cant find anything tried reinstalling but still no good here is a 2 pictures to explain it does it with every picture ive tried but it goes clear if i zoom in to like 100% on big images and
-
Running Ant file - build.xml from JDev
hi all I have created simple BPEL project. I'm using JDev 10.1.3.1.0 & SOA suite 10.1.3.1.0 . If I deploy my BPEL process using deployment utility of JDev then it gets deployed well on localhost:8888 . But If I run build.xml Ant file from JDev then i