FF dissconnects after opening too many taps

When opening taps in FF7.1 I can get a few taps open without any problem, surfing normaly just fine.
When i open too many taps (normaly around 5) then FF can't connect to ANY pages anymore, not even the ones i had open before.
I've used the current installation for 2-3 months without problems, but after i moved my PC to a friend and back home this problem startet.
I've made a clean installation of FF7.1 only importing bookmarks to get alot of tabs open quick.
All firewalls/antivirus programs have been disabeled, and the rest of the net works just fine.
No error messages of any kind, it just keeps turning the "loading page"-circle untill i get tirred of it.
Windows 7 home.
Currently i have reverted back to FF6.0 to not go crazy from having to use IE.

FF6.0 does it as well... any idears ?

Similar Messages

Photoshop CS5 doesn't work properly after opening too many images

Hi
This is my very first post.
I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
thanks
--Venkat

Disabling OpenGL entirely is draconian.
You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
-Noel

IView BSP open too many sessions

I'm using SAP EP 6.0 NetWeaver 04 and SAP ERP 2005 : ECC 6.0.
I have create a BSP IView in my Portal to access an BSP application in SAP ERP 2005.
When I test it, the IView open too many sessions and then the ICM Server is not available. The server is Overload !!!
How can I configure the IView to open only one session ?
Have you got an idea ?
Thank you very much.
Regards,
Mathieu

Hi Mathieu,
I am not very familiar with BSP iViews and BSP applications but you describe a problem that sounds quite familiar to me.
We were running a custom application on a SAP EP 6.0 NetWeaver 04. It happend that a short time after a user started to test the application the dispatcher crashed. The crash was caused by too many sessions requested by that single user. We could not explain where the session requests came from and did some investigation.
We observed that the problem occurred only if the user used the MS Internet Explorer 6.0, the request was routed via a certain proxy server (MS ISA Server) and the protocol used was HTTPS.
To analyze the problem try an alternative browser and have a look into your network. Try to route the request differently. Try another protocol.
Best regards,
Martin

Firefox 4 opens TOO many empty windows on starting the browser!

Every time I open up Firefox 4 a BUNCH of empty windows load up with my LAST 'remembered' tabs. SO I have ONE window with all my tabs intact.. and then like 13 EMPTY windows and this happens EVERY time I start up firefox. I have tried everything from using the about:config and changing that one browser tab setting to 'true'... I took out the mimeTypes.rdf from the Application Basics section I even tried UNINSTALLING and REINSTALLING firefox.. I'm SO tired of all these empty windows does ANYONE know what could cause this? I also ran a 'malware' check and I have NONE. I have honestly done EVERYTHING to try to fix this... just wondering if anyone ELSE is experiencing this and if anyone else has ANY other advice! I'm about ready to switch to Google Chrome.. I don't want to! So ANY help/advice would be appreciated! Thank you!!
<i><removed bold formatting - edited by moderator></i>

Hi cor-el,
I think I've seen your answer before on OTHER questions like this one that I asked... The '''STRANGEST''' thing is.. yesterday it opened up '''PERFECTLY''' with NO problems.. then TODAY.. when I opened it.. it actually for SOME reason remembered this 'adobe' page I was on that I KNOW I closed and OTHER windows again.. and it just seems like a MESS now any time I reopen.. like... ''EACH time ''will be a SURPRISE as to what I will SEE in the tabs or extra empty windows...
BEFORE I attempt this... (I didn't WANT to when I saw you post this before) but NOW I think I MAY have NO CHOICE.. but BEFORE I try this...
Can you ''PLEASE'' tell me what you mean by... 'REDO App Tabs and Tab Groups'?? I don't understand what that means? How DO I do that?? I'm sorry I checked the link under there and I FEEL totally '''confused'''! If you have a 'short cut' way of explaining this I would LOVE to know and '''''appreciate''''' your time and help.. if not, I understand as I'm SURE it's a bit of explaining...
I just DO NOT understand why this is happening in the FIRST place? HOW did it START and what the HECK did I DO to make this happen? And why is it, that it seems like NOT too many people HAVE this issue?
Anyways, thanks for your time.. and
ANYONE ELSE''' if you have annnnnnnnnnnnnny IDEAS please let me know or if anyone has heard '''ANYTHING''' else about this '''ANNOYING''' situation!
Sincerely,
'''FRUSTRATED '''Firefox USER (Shivonne) :(

Send/receive issue after adding too many additional mailboxes

Hello Everyone,
I am trying to solve a problem with Outlook 2010, together with Exchange 2007 (SBS 2008 server). I am not sure if I should post this in the Exchange forum, or the Outlook 2010 section.
The inbox (or actually all folders) are not updating when I add too many additional mailboxes via Account Settings>More Settings>Advanced Tab.
When i keep it down at 4 mailboxes, all seems fine. When I add a fifth mailbox, it no longer syncs automaticly. The user has to manually select send/receive in order to receive mail.
What i tried:
1) Fixing OST
2) Removing OST, create a new one.
3) Create a new outlook profile
4) Tried /cleanviews and /safe switches
5) Checked all Office updates
6) Tried different Send/receive group configurations (altough it is to my understanding this should not apply for Exchange)
7) Disabling cache (not an option, outlook crashes a couple of minutes because of the large size of the additional mailboxes)
8) Disabling "Download Shared Folders" in Account Settings>More Settings>Advanced Tab
Could anyone assist with this problem? Thanks in advance!
Regards, Anton

Hi Anton,
As far as I know, Outlook 2010 allow up to 5 Exchange accounts to be configured in a single mail profile by default. But the limit can be changed up to 15 accounts by adding a registry key:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Exchange
DWORD: MaxNumExchange
Value: a number between 1 and 15
Please try adding this key and let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Plugin opens too many Http connections

Hi Java gurus,
My applet sends many POST requests (10-20 per second) one by one (not concurrently) to an IIS server application, using HttpUrlConnection. When I run it with AppletViewer, I see (with netstat) a single HTTP connection which is re-used for each new POST.
However, when I run it under IE with Plugin 1.4.0 or 1.4.1, netstat shows that each POST creates a new connection. After the response arrives, this connection goes to TIME_WAIT state for several minutes and the next POST opens a brand new connection. After some time I see hundreds of TIME_WAIT connections.
I got an advice (from experts-exchange) to force using sun.net rather than sun.plugin, thus avoiding the apparent plugin bug. I do it as follows:
URL.setURLStreamHandlerFactory(null);
sysProperties.setProperty("java.protocol.handler.pkgs", "sun.net.www.protocol");
Now a single connection is opened and re-used for all POSTs, but the applet is not aware that it runs under a plugin or browser, e.g., it doesn't recognize the IE proxy settings.
My questions:
1. Is this a known plugin bug? (I could not find any similar bug in Web).
2. Are there other potential problem with my workaround?
3. Are there other solutions to my problem?
Thanks in advance
Sruli Ganor

I am facing the same problem...

Safari opens too many windows

After upgrading to OS Lion, when I open Safari it doesn't always take me to the default Apple site -- sometimes it opens multiple windows to sites I recently visited; sometimes it goes right to the Apple site -- I never know what I'm going to get. Also seems much slower loading pages.

Here's what I've done [from "For the truly paranoid...digital shredder -- security (Apple)"]:
-Where are your user Safari cache files located in OSX?
NOTE: The workflow is throw away what is in a folder without throwing away the folder except when deleting QuickTime files which case you'll throw away the selected folders as stated below.
Home>Library>Caches>com.apple.Safari>Cache.db (throw away the Cache.db file)
Home>Library>Caches>com.apple.Safari>Webpage Previews>get rid of all the files in this folder, they are .gifs, jpegs., png, etc (they are image files to what you have been looking at on the internet
Home>Library>Caches>QuickTime>Downloads>Throw away any folder here like 00, 01, 02, 03, etc. These folders contain any thumbnail of link to movies you have been watching on the internet.
Home>Library>Cache>Metadata>Safari>Bookmarks> throw away everything in this folder. It contains navigational information to the sites you have visited.
Home>Library>Cache>Metadata>Safari>History> throw away all the files in this folder it contains the history of your internet surfing habits.
Now throw away these files:
History.plist
HistoryIndex.sk
LastSession.plist
TopSites.plist
WebpageIcons.db
they are all located here:
Home>Library>Safari> History.plist, HistoryIndex.sk, LastSession.plist, TopSites.plist, WebpageIcons.db
Lastly, remove what is in the LocalStorage folder located here:
Home>Library>Safari>LocalStorage>link.localstorage
Now in the Finder use, "Secure Empty Trash..." to not only empty the trash but securely write over it.
For example, as stated above, this: "Home>Library>Caches>com.apple.Safari>Cache.db " means:
1. Select your Home folder in a Finder window, it’s located in the Sidebar and looks like a house.
2. Now select the Library folder
3. Next, in your Library folder select the “Cache” folder
4. Next, while in your Cache folder select the com.apple.Safari folder
5. Select the Cache.db file and throw it away
What will happen is next time you surf the internet Safari & QuickTime will create new set of folders & files.
Side notes
- Use “Private Browsing” if you use Safari to surf the internet
- Use a Proxy Browser to surf the internet
- Throw away the above files immediately after surfing the internet & use “Secure Empty Trash…” and also use Disk Utility, "7-Pass Erase" as stated above.
- Never save and load a file to a grow site with "metadata." Software like Photoshop, iPhoto, Aperture and many others can read it and it might contain information about you.
- Never use GPS (Global Positioning System) to photograph your grow, it travels as metadata with your photographs
- Never use "Location Services" on cell phone which pinpoint your location with great accuracy.
- EXIF (Exchangeable image file format) data can never be modified. EXIF data is recorded every time you click to take a photograph - it records many things like time of day, lens used, camera type...
- If you use a computer other than yours to surf the internet you most definitely will want to throw away the above files and "Secure Empty Trash..."
This may seem like a lot of stuff to do but after doing it a few time you'll have it committed to memory
(sorry if i posted this in the wrong place, mod -- feel free to post it in the correct location, thanx)

ADF panel opening too many JDBC Thin Client database sessions.

Hi All,
I have several ADF Panels, which allows the user to run a few simple queries against an Oracle database done using ADF view objects and ADF view links and ADF application module.
Each ADF panel as I said contains several View Link queries, and links under the form of Jbuttons to other ADF Panels running other ADF View Links.
Running the ADF Panel as described here opens up to 21 database sessions displaying as “JDBC Thin Client” when I look them up from v$session.
Why do I end up with that many database sessions.
Why doesn’t it just use one or two database sessions to run all these View Links? It seems that it is opening one database session for each of these view links.
How can I change this destructive behavior? I only one to see one or two database sessions for the entire ADF panel no matter how many ADF View Links it contains.
Your suggestions are most appreciated.
Thanks.
Bobby A.

Thanks for your response.
I took a quick look at the docs you pointed me to. It seems that I can set some parameters in bc4j.xcfg of each application module Home to control number of database connections that the application module will create. In that case maybe you can recommend which parameters and what value they should be set to.
Your response will be most helpful as my background is rather in database admin and not java.
Thanks.
Bobby A.

IPhoto won't stay open - too many photos

I have a PowerMac G5 with 1.5 GB RAM and about 82GB of a 150GB HD available. I recently passed the 25,000 photo mark in my iPhoto5 library. Since then the libaray can not be opened, or shuts down consistently after being open for about 5 seconds.
What can I do to get iPhoto working again?
Thanks.

I just read about this program to help manage large iPhoto libraries in MacWorld magazine. I haven't tried it yet, but they gave it a good review. It might solve your problem. Check it out:
http://www.iphotolibrarymanager.com/
http://www.macworld.com/weblogs/macgems/2006/10/iphotolibrarymanager/index.php
20" iMac 2GHz Intel Core Duo Mac OS X (10.4.7) 2GB RAM, 500GB HD

Applet is opening too many TCP ports

Hi,
I have developed an aplication running as an applet, the
applet is in a remote computer with apache
when I start the applet from a client, sometimes appears
pretty fast (30 or 40 seconds) and sometimes appears after
10 minutes, or never !!
If a make a netstat in the client computer, i can see more
than 500 ports opened against the port 80 of the server
(most of them in finished state)
What is going on ? where is the problem ?
Thankyou very much

Hi,
(a) Server Side only.
(b) Yes. but only on the callback interface, which passes back recently created Player / Game remote objects.
(c) No socket factory. I'm using whatever is default.
(d). Yes:
Server
Registry = LocateRegistry.createRegistry(10000);
// all remote objects are exported to the same port (however this value used to be 0)
UnicastRemoteObject.exportObject(instance,10001);
Client
// callback interface
UnicastRemoteObject.exportObject(callback,0);Regards,
Rich

I tried to open too many files in preview and now it won't open at all.

how do I change the settings so that it doesn't keep trying to reopen these same files?

I have tried to force close/quit but every time I try to get back into the "preview" application, it tries to reopen the same files. It may actually be a setting with all of my applications as they all open the file I was last working on. Is there a way to change that?

Firefox 19 crashes (shuts down) for no apparent reason (3 windows & multiple tabs open, too many?) never was a problem before

4 gb ram, using up to date Win 7 and Norton . Notice no pattern but perhaps it could be Adobe related (also up to date) since I have had Adobe PDF's open and/or downloading.

hello kheikal, i can detect no apparent cause that triggered those 2 crash report. as a general advice try to [[Reset Firefox – easily fix most problems|reset firefox]] & check the integrity of your system's RAM with a memtest tool...
[[Avoid crashes - Tips and tricks]]

Is there a password lockout after entering too many incorrect passwords for a .dmg folder?

I entered three passwords for my .dmg folder before receiving a warning that said authentication error. I'm pretty sure I am now entering the right password, but it still won't open. I'm wondering if I've been locked out? I tried to shut down and restart the computer and do it again, but it's still not working.

There is no lockout feature.

What could this mean? It keeps appearing on my console. 10/29/11 10:17:47.113 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:1257 (18) socket Too many open files

10/29/11 10:29:17.285 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:209 (fe09000a) CTunTapMgr::openDevice
10/29/11 10:29:17.285 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:1257 (18) socket Too many open files
10/29/11 10:29:17.285 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:340 (fe09000b) CTunTapMgr::disableHostMgr
10/29/11 10:29:22.286 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:259 (18) open Too many open files
10/29/11 10:29:22.286 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:209 (fe09000a) CTunTapMgr::openDevice
10/29/11 10:29:22.286 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:1257 (18) socket Too many open files
10/29/11 10:29:22.286 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:340 (fe09000b) CTunTapMgr::disableHostMgr
10/29/11 10:29:27.287 PM vpnagentd: [p:133 pp:1]: error - TunTapMgr.cpp:259 (18) open Too many open files
What could this mean? It keeps appearing on my console. I"m trying to install a Fitbit Tracker and can't get it to recognize the device. wondering if this has something to do with it. Thanks!

It means you've installed some kind of third-party VPN software that isn't working.

Tryin to get to new sight.keep gettin safari cannot open because too many redirects

Tryin to get to new sight. Get reply: Safari cannot open too many redirects

Go to Settings>Safari>Clear History, Cookies and Data.
Sometimes it helps to reset your iPad as well. You will not lose any data if you reset your iPad like this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

FF dissconnects after opening too many taps

Similar Messages

Maybe you are looking for