FF ID is not available in GRC system.

Hi All,
i have configured FF in GRC system and have dine following activities
1. maintain connection setting in SPRO.
2. created FF id in ECC system and assigned FF standard role.
3. run all necessary synchronization job.
4. assign owner.
but FF id is not available in GRC system.
can you you please help me.?

Hi Alessandro,
Thanks for your replay. please find my configuration in details.
1. Parmid 4000=1,
4010=SAP_GRAC_SPM_FFID
2. Maintain maintain connection SUPMG in SPRO > GRC > Common Connection Setting > Integration Framework > Maintain Connection Settings.
3. Create FFid in ECC DEV system.
4. assign role SAP_GRAC_SPM_FFID to FFid.
5. create FF id owner and FF id controller.
6.Run Syn.
but when want to assign controller to the FF ID then found FF is not available.

Similar Messages

Encore CS5: The software that's used to decode the media is not available on this system...

Hi guys, I am needing assistance with this matter. I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something. Can anyboy please assist me?
Here's the background:
OS: Windows 7 64-bit.
Video footage format: AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4).
Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore. The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link. (This is the way I have been operating countless times in CS4. However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again.
So I tried the other way around. I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice. This time around, i don't get a crash out of Encore, instead I get the following message:
"The software that's used to decode the media is not available on this system.
Installing the correct decoders for the files you are working with may help to correct the problem."
So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009). I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up. Can anybody help?
Many Thanks,
Matt

I am having the same problem however I end up having hardware error "Sense code 52102"
My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
I have wasted over 20 DVD's trying different things.
OS: Windows 7 64-bit.
Video footage format: HD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Client is not available in the system

Hi Experts,
A quick help need. Few users on our client side are logging to portal. They go to Process Bid aplication of CCMS.
Here they are getting "Client is not available in the system" error. We have verified the portal and backend roles and every thing is fine. can you please suggest the solution.
Thnx in advance

Hi Vijay,
Pls check the system in which you have defined the client is correct.
Thanks
Anil

The currency translation type 0MEANDAILY is not available in the system

While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
Any help?
Thanks
Arunava

Dinesh,
If I do a transfer Global setting from RSA1 on my CRM system there are four to choose from
1> Currency
2> unit of measurement
3> Fiscal year variant
4> Factory calander
Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
Anurag,
Can you please be a little more specific .. I am in the rsa1--> bc Then what.. How do I search? I searched against the infoobjects and this is not available
Thanks
Aruava

Getting error on imac at time of loading photoshop CS3 plugin - "One or more plugins currently not available on you system"

Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.

Sounds like a PiPL issue, can you show us your definition?

Getting error on imac at time of loading photoshop plugin - "One or more plugins currently not available on you system"

Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.

Thanks a lot for you suggetion.
2009/5/22 Ramón G Castañeda <[email protected]>
If you had been running CS3 on a PPC machine (PowerPC or pre-Intel box)
it's likely the plug-in was not written for Universal Binary.
>
Now that you have an Intel iMac, any plug-ins that have not been updated
for Universal Binary will not run, because your CS3 is now running natively
in Universal Binary.
>
In order to run your older plug-ins, you would have to run CS3 in Rosetta
emulation software—with a corresponding, MASSIVE performance hit..
Rosetta emulates the PPC chip. To set up CS3 to run in Rosetta, you
highlight the application icon in the Finder a do a Get Info on it (Command
I). check the Run in Rosetta box, close the dialog box, launch CS3 and
watch it crawl along.
>

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

InDesign CS4 can open .indd, .indt and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

Software used to decode the media not available on this system

"The software that's used to decode the media is not available on this system…" I get this error message when I try to import an H.264 video file (about 3.7 GB in size) into Encore CS6 to make a Blu-Ray. I've read the message threads about this problem but they don't seem to apply to my case. I'm using a recent Mac Pro Tower running OS 10.8.5. I made the H.264 file using Compressor 4 and a Matrox MX02 box using the Matrox encode setting for high-quality Blu-Ray. I've used this workflow a number of times before and never had any trouble importing the resulting files into Encore. I've tried starting a new Encore project and also re-doing the encoding of the H.264 file, without success. I've also experimented with importing other, recently made H.264 files into a new Encore project and these, as before, present no problems. I'm baffled!

I solved the problem and thought it might be helpful if I described the solution. The error message gave no indication of the nature of the problem, which was caused by a single clip in the Avid Media Composer timeline. This clip was an import from Photoshop, resized in Avid Media Composer. In height, the pixel dimensions of the Photoshop file were a bit more than 1080. I have no idea how this dimension survived rendering in Media Composer or H.264 encoding in Compressor using the Matrox MX02 box. But it evidently did. When I resized the image in Photoshop before importing it into Media Composer, then re-encoded the video as H.264, it imported normally as an asset into Encore.

The software that used to decode the media is not available on this system

I can see that this has been asked numerous times over the years. I am sorry to post this AGAIN, but I have not yet found a solution and have a deadline looming.
We created a 200+ DVD's using Encore CS6 on a Windows 7 system.
We upgraded to Windows 8. Re-installed CS6 Production Premium.
Now, when we try to open the projects to make a few edits, we get the "The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem."
I've done the Encore Updates. I've done the Media Encoder updates. I've "Run as Administrator".
I've tried re installing.
Does anyone have any suggestions on how to debug this? The videos are already transcoded as *.m2v files.
You'd think this would be easy... like install a codec or something.
==> Mike.

Part of the problem is that this is probably not a "logical" error. The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
http://forums.adobe.com/message/6004428#6004428

Currency translation type 0CMCALDAY is not available in the system

Hi,
When I run the query, I am getting following error message
"Abort the currency translation type 0CMCALDAY is not available in the system"
I couldn't find 0cmcalday object in BC too. How can I install in this obj in BW??
Thanks,
SK

Problem solved
It is located under Currency Conversion types, in the BC

While updating my iphone, I am receiving a notice that itunes is not available. Is system not avaialbe and should I just try later?

while updating my iphone, i recevied a message that iTunes was not availabel and to try later. Is the system not available or is there something wrong with my computer

Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
          - If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
          - Select the iOS device from the iTunes window and click the Summary tab.
          - Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
          - Click Apply to sync the changes to the device.
          - Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M.

Query Transported Successfully : But transported query is not available in PRD system

Hi Gurus,
I have transported one query yesterday. And transport got successful with out any errors.
Now i am checking the same query in PRD system, but i am not able to find the query.
Checked in RSRT and Query Designer in PRD System.
Table RSZCOMPDIR is showing only M version of the query in PRD.
Please help to fix this issue.
Regards,
PRK

Hi,
have you cheeked the STMS there showing return code - 0,4,8,15 means success or warning or red?
have you transported successfully form dev to qav?
are you seeing same query in qas?
if not available same query on PRD please re import the one more time.
check the RSRT giving the technical name of query and check the multi provider.
Thanks,
Phani.

BEx Browser Not available in my system

Hi,
We have GUI of 7.10. version and Bex 3.X. I am able to find Bex Browser in other system of my friends.But it is not avaible in my system.
What would be the Reason?
We have support package 22.
Patch Level 12.
Regards,
Naresh.

Hi,
When you install "BW 3.50 Add-On for SAP GUI 7.10",it will install Browser (SAP BW 3.x) under Business Explorer(SAP BW 3.x).If you couldn't find it,please uninstall and reinstall the BW 3.5.
The BW 3.5 patch 8 in SAP GUI 7.10 is released to the SMP now and is available for download.You can try with this.
Rgds,
Murali

The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.

I'm trying to make a DVD menu in Encore, and then when it came round to loading my AVI files into it, bam. Apparently, I don't have the decoders necessary - this is unusual.
I'm running on a Apple MacBook Pro, and I have Perian installed for all my codec needs. I just don't understand!
Any help would be most appreciated...

Welcome to the forum.
It is most likely that the error message is telling you the truth - the necessary CODEC is not available. It might not be installed, or might be broken.
The first step is to gather the full details of your .AVI files. This ARTICLE will help explain the potential issues. Sorry that the utilities mentioned are for the PC. Do not know if you can run them in Parallels, or Bootcamp, or other, but similar should be available for the Mac if you cannot.
I have to admit that I know little of Mac's, and especially how they install and handle CODEC's. On the PC, I can offer help there, but not in this case. Again, with my "sorry."
There could be two ways to handle the issue, and that might depend on the info gathered afer you read the above article. It could be that the simple installation of the proper CODEC will fix it perfectly and easily. Or, it could mean that you will need to convert your .AVI to something along the lines of a DV-AVI. Though I do not use them in Encore, I have no problem working with .MOV [Animation CODEC] files from FCP in my PrPro. I've just always done all editing in PrPro, before Exporting/Importing to En. I do not know how En will handle .MOV's, but if some Mac-only CODEC is used, probably not so well.
Good luck,
Hunt

FF ID is not available in GRC system.

Similar Messages

Maybe you are looking for