FF on my XP Desktop doesn't open. 'Procedure entry point not found...'

Started yesterday aft. Do not know why.

Try this one from Article TS3074
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074

Similar Messages

  • Thunbird won't open after update, I get Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll

    Thunderbird has just failed after an update. It doesn't open. I get the following message:
    Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
    Any help on what I can do to deal with this?
    Many thanks,
    Chris

    ''AscotAles [[#question-1037793|said]]''
    <blockquote>
    Thunderbird has just failed after an update. It doesn't open. I get the following message:
    Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
    Any help on what I can do to deal with this?
    Many thanks,
    Chris
    </blockquote>
    Thanks Finitarry, that's solved it & all my emails are still there. Excellent!

  • Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

    Tried to update to iTunes 10.5 on Windows XP.  Everything seemed to install properly and I restarted.  However, when I try to open iTunes, it will not open and I get the following error message:
    iTunes.exe - Entry Point Not Found
    'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
    When I click 'OK' (which is the only option), it says:
    'iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)'
    I have updated iTunes on my machine in the past numerous times without ever having an issue.  Now, I get this and cannot access iTunes at all.  I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail.  I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library.  Is there anything I can do?  Seems like it should be a simple fix.
    When I called Apple, they told me to upgrade my OS to Vista.  Huh?  That seems like overkill to me.  iTunes has always run fine on XP.
    Please help!

    I found another site and it suggested that I go through System Preferences and check downloads again.  The iTunes update was still there indicating that it still needed to be downloaded.  So I downloaded it again and now it works fine.  I hope this might help someone else.
    Thank you

  • My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

    When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
    I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

    Try this one from Article TS3074
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

    Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
    I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • Flash CS5 wont open after working for years? Entry point Not Found

    Hi Guys,
    I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
    Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
    I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
    I tried run as administrator on flash and it said the same thing.
    I am using windows 7 Ultimate N SP1 64 bit
    Here is the alert in text.
    flash.exe -Entry Point Not Found
    The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
    AVUI_ButtonChangedMessage@23@@Z could not be located in the
    dynamic link library dvaui.dll
    Please let me know what is going on here.
    Thanks, I really appreciate the help.
    Randy

    You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
    Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

  • When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Installed Itunes 10.5.  I try to open Itunes is says Entry point not found.

    I just installed Itunes 10.5 and restarted the computer.  Now when I try to open Itunes is says Entry point not found.  The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundation.dll.  I have tried to reinstall and repair Itunes 3 times and I still get the same prompt when I try to open up Itunes.  Can anyone help me fix this please?
    Thank you in advance.

    I hope this is of some help to you as I found it when trying to solve my own problems with 10.5
    "Taken at face value, you've got a damaged Apple Application Support program file, balda. (iTunes needs a properly functioning Apple Application Support in order to work correctly.
    On a 32-bit Windows 7 system, I'd try the following set of instructions:"
    http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253

  • TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

    since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
    these are the boxes that open up:
    I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

    anyone able to help me with the above?

  • Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

    I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7.  The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found”  X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll.  My only option in this window is an OK button.  If I click this button several times, the program eventually opens. Below is screen shot of the error window.
    Thanks,
    Matthew Kraus

    Thanks Zeno and others.  Uninstalling Quicktime and then reinstalling it was the fix.
    Thanks again,
    Matthew Kraus

  • ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

    hello, can somebody please help me...
    Everytime i open iTunes it comes up with this error message:
    The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
    I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
    Please help me, Thanks!

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

    Hi, whenever I try to open iTunes I also get this message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
    I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
    I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
    Thanks.

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • Can't open Icloud. "The entry point not found".  Can't reinstall until I open Icloud and log out but I can't access it.

    I am trying to re-install Icloud, however I can't redownload until I uninstall Icloud, but I can't uninstall until I log out in the Icloud Control Panel.  The problem is that I can't open Icloud to log out because it says Entry point not found.  I'm having an issue with all aspects of this!

    I see you still have your smc0. I'm working on my first attempt at OSB and Oracle support said we have to remove rmt0, rmt1, smc0 before we can install OSB. They saw it in the device list and said those devices must already be taken.
    Is you setup working for OSB and regular mksysb & sysback too with the Atape.driver?

  • APSdaemon.exe entry point not found? also itunes won't open.

    ever since i updated my itunes/quicktime, this has been popping up at startup. today i tried opening itunes and i also got an error "itunes.exe entry point not found. the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll". earlier, i had an error with sqlite3 but i managed to fix it my copying the file elsewhere.
    not sure whats going on though. thanks for the help in advance.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

Maybe you are looking for

  • Down Payment Clearing Document shows as open item

    Hi, I made an Down Payment Request (f-47) for $ 1000; made a Down Payment on that request (f110) for $1000; posted an invoice (fb60) with $ 1000; cleared the down payment and invoice (f-54) for $1000. Now in vendor open item s(fbl1n), both invoice (K

  • History of foreign currency valuation F.05

    Hi experts We are using 4.7. Someone run f.05 with strange conditions then make documents. So I would like to know report when he run it, And we reversed his documnets with FB08 but when we clear A/P, A/P, SAP makes Foreign suppliers reevaluation acc

  • App.server load balancing for SAP System with 1 PS

    Hi, In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer. After activating the "App.server load balancing" setting in SAP system definition the application servers

  • Process and commit behind a comand button

    new bee question i have created a application to update data within the database (ora 9.2). the user wishes to press a button that updates the data commits and then exits the form back to the previous form all seams easy ! but i can only do it in two

  • Java on 8051

    how about java on 8051 developments ? good tutorials plz. regards, karthik bala guru