FF (ubuntu reg update) does not show and allow editing .odt .ods .eml files in shared dropbox

https://www.dropbox.com/sh/fj1xcy2wpkvlk5u/AACx76XgAM70D96I_r8VUICwa?dl=0
in which
https://www.dropbox.com/home/PIEDE_TORTO_ESITI_DOC/PIEDE_TORTO_COMMENTI
contains an .odt shared with writing permissions
thanks many

* not that obviously, online editing

Similar Messages

ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery.

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

How do I find duplicate songs which the latest itunes libary update does not show?

How do you find duplicate songs in itunes which the latest updated version of itunes does not show, where the older version did?

=Downgrading from iTunes 11 to iTunes 10.7=
Try activating the sidebar, menu bar, and status bar and see if this is close enough to the previous version to make you content. It is easier than downgrading and eventually you will be forced to run a newer iTunes unless you have an endless supply of the model computer you currently own.
You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404). Alternatively:
Back up your computer first, in case the unexpected happens.
Quit iTunes.
Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394. Do steps 3 and 4. Steps 6-8 may be also useful but I don't know if they are essential. Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
Replace the iTunes 11 application with iTunes 10.7. Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved. Two ways to do this are:
1. (Easier) Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
2. (More work) Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7. I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl" and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since. See:
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
- https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
- If you encounter error -42408:
iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested). A variant of this is at: https://discussions.apple.com/message/20448184
- Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

HT4623 iOs6 update does not show up on iPad2.

I am trying to add an application and it requires the iOS6 update. The update is not showing up under my settings.
HELP!

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad update to iOS 6.0.1, so you will lose the built-in YouTube app and the Maps app will change.

Produced lens profile for Canon G12 put in folder 1.0 does not show in lightroom edit pane

Noted that adobe show lens profiles for G10, G12 G15 and G1X but only G10 shows in downloader and in lightroom edit pane profile selection
Created my own lens profile for G12 svaed it but does not come up in edit pane choices??

What LR version are you using, and does LR let you manually select the profile you want?
I take your point that Canon could have offered their own Adobe-compatible profiles, but those would probably have needed to then be supplied to the end user by Canon, not by Adobe.
I am seeing the particular Canon profiles that you mention, in LR 5.4, offered against Raw images but not against non-Raw images.
Unless you are using an older software version, or selecting perhaps a derived edit version in e.g. TIFF instead of a Raw, I am at a loss why you are not seeing them too.
I believe these will have been generated by Adobe. They are here on my PC:
Please note that there is a non-Raw profile listed there for e.g. the G10 but not for e.g. the G12. So the fact that you ARE seeing a profile for the G10, lends some weight to the idea that the image currently selected may not in fact be Raw based.
BTW, I don't think that any extra profiles that the user might make or find, and then save in here, are going to ever be seen by LR (or ACR). This is apparently the Adobe "official installed profiles only" location.
Any profiles made or found by the user, need to be saved into a similar folder within the user's data area, in order for LR to see them and use them. And if these are Raw based, they will still not appear for a non-Raw based image.
On my Windows computer, that location is C:\Users\[username]\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
This has a "Downloaded" subfolder (which is, I think, the destination used by the Adobe profile downloader utility).
RP

Portal page does not show up the edited portlet

Hi ,
We were on 3.0.9 and recently migrated to 9.0.2 ......and i am just trying to develop a simple page in which am adding an html portlet on the page ...my doubts are ..
1. the portlet does not show up immidiately on the page ..
2.the edited content in the html portlet does not show up on the page ???
What am i missing here ??? can some body help
vi

Might be caching issue.
Try this:
Add : &1=2 at the end of URL in the location bar and press enter. If is appears then it is just a caching issue.
Thanx,
Chetan.

I have installed os x update 10.10.1 but it does not show and I cannot update to 10.10.2

I'm running a 5-year old macbook (2009 white) running Yosemite. I had to install update 10.10.1 as a stand alone because the app store shows it as an available update but will not "install it" (the app store will start to "download" it but the download always stops after 1-3 seconds.....fast forward to today when tried to update to 10.10.2 and the app store will not install it....I click on the download button and it starts to download then stops after 1-3 seconds. I again downloaded the 10.10.1 stand alone update and installed it using the .dmg file. I then downloaded the 10.10.2 update as a stand alone and when I tried to install it, I could not because the installation program said that I didn't have 10.10.1 installed......I'm at witts end. I've tried every solution I can find but nothing has worked and my computer has been acting this way since at least November. Any advice out there?
Thanks!

I'm running a 5-year old macbook (2009 white) running Yosemite. I had to install update 10.10.1 as a stand alone because the app store shows it as an available update but will not "install it" (the app store will start to "download" it but the download always stops after 1-3 seconds.....fast forward to today when tried to update to 10.10.2 and the app store will not install it....I click on the download button and it starts to download then stops after 1-3 seconds. I again downloaded the 10.10.1 stand alone update and installed it using the .dmg file. I then downloaded the 10.10.2 update as a stand alone and when I tried to install it, I could not because the installation program said that I didn't have 10.10.1 installed......I'm at witts end. I've tried every solution I can find but nothing has worked and my computer has been acting this way since at least November. Any advice out there?
Thanks!

"Installed Updates Does Not Show 10.5.7"

Yesterday I upgraded my late 2008 2.53 MBP to Mac OS X 10.5.7 via the combo updater because the "Software Update" function gave me the "...digital signature..." error message reported in other threads. Prior to performing the update I used "Disc Utility" to verify the status of my HD and I also repaired permissions and followed the other steps (in the correct order) described in detail in a very helpful posting from Kappy regarding this. However, I have since noticed several small but bothersome errors: the "ignore trackpad when mouse is present" option is missing from my "Trackpad" preference pane and I also don't have the restored/enhanced settings in my "Energy Saver Preferences" option on the battery bar. Of even more concern is the fact that when viewing my "Installed Updates" in the "Software Update" preference pane I do not see the 10.5.7 update identified; however, I do see the previous 10.5.6 update identified correctly. Looking at "About this Mac" does reveal "version 10.5.7" but I am concerned that something is wrong. I have also re-downloaded and re-installed the 10.5.7. combo update but no joy. I appreciate any thoughts on what my other options might be.

baltwo wrote:
For the EnergySaver prefPane anomalies, you might move the com.apple.PowerManagement.plist out of /Library/Preferences/SystemConfiguration to the Desktop, restarting, and see if resetting them works.
To get the update listed in the SU window, it has to do the installation. Alternatively, open /Library/Logs/Software Update.log with TextEdit, add this line, for example (from mine),
*2009-05-12 21:24:07 -0800: Installed "Mac OS X Update" (10.5.7)*
followed by a return, save the file, and quit TextEdit. Now, it should show up in the list.
I would add "manual-delta" or "manual-combo" or some such tag to distinguish it from an automatic update, which is not exactly the same thing. Maybe just MD or MC?

WHEN OPENING A FILE WITH FIREFOX MULTIPLE FILES KEEP OPENING IN RAPID SUCCESSION WITHOUT SHOWING ANY CONTENT AND THIS DOES NOT STOP AND I CANNOT SAY HOW MANY FILES I HAVE

THERE IS A PROBLEM IN OPENING ANY FILE. WHEN OPENING - A RAPID SUCCESSION OF FILES OPEN, ONE ATOP THE NEXT, WITHOUT SHOWING FILE'S CONTENT. THIS CONTINUES FOR QUITE A WHILE. I MUST TURN OFF COMPUTER. IT IS NOT POSSIBLE TO CHOOSE ANY OTHER FUNCTION WHILE THIS IS HAPPENING, IE : WHEN OPENING A FILE. AS IN , I CANNOT OPEN GOOGLE OR MAIL, ETC. AND THE FILES KEEP OPENING AS UNTITLED. SO I AM NOT ABLE TO OPEN ANY ONE FILE, AND SEE ITS CONTENT, THEY JUST KEEP STACKING LIKE EMTY PAGES ONE ON TOP OF THE NEXT.

THANK YOU
THAT DOES NOT SEEM TO BE THE ANSWER
I HAVE A MAC
BOUGHT IN 2008
AND I DO NOT SEE THAT I HAVE A STUCK KEY
PERHAPS I AM NOT UNDERSTANDING WHAT YOU MEAN

HT1338 Software Update does not show 10.8.5 Security Update 2014-002

I continue to have Mac 10.8.5 updates which do not show in the App Store Software Update. In the past it was always iTunes which didn't show. Now it's this security update. Why would Software Update not show these available updates? Instead it shows Mavericks and such as available updates, but not the current available security update for my version of OS X. I'm only aware an update exists because of online forums. Is this a widespread issue that is affecting everyone on Mt Lion?

Already tried that. We set up iClound under a new user account and it did not work.
(We tested iCloud Mail with Apple Sr. support yesterday, in a new user account. It did not work. Note, iCloud via web access via Safari of course will work, accessible from any computer. That is not computer-specific. But iCloud mail would not work on my Mac, nor in the Mail app, even under a new test user account. This was mentioned briefly in previous post above.)
Regarding re-installing ML, Apple support have never suggested that. They have only suggested moving my current data to a new user account, which as I mentioned is not realistic, and now with the new iCloud problem across any new user account, would not solve the problem.
How do you mean to re-install ML? Erase the HDD, reinstall ML, then restore from Time Machine?
I think Apple has not suggested that so far because they believe the problem is in the current Mac data, user account, and not in the system. They have told me migrating to a new Mac or even to Mavericks probly would not solve the problem. But now that it's a systemic issue with iCloud -- my previous issues with Software Update not working and appeared to be user account-specific, and still are – perhaps replacing the system software or upgrading to Mavericks will be worth considering.
They are currently elevating my case to "engineering." They will be looking at system data, I believe...
It's incredibly frustrating.

Firefox installed version 5. I cannot find the place to change privacy settings. I have searched the Help and it does not show how to edit mine. I have Vista. I urgently need to enable cookies. Help

I have searched under the Firefox dropdown box and cannot find tools or privacy settings.

Click the Firefox button, click Options, click Options, from there, everything is the same as before (click Privacy and be sure first item "Firefox will:" is set to "Use custom setting for history" to see all of the settings on that panel).
You can still use/see the Menu Bar (''File, Edit, View, History, Bookmarks, Tools, Help'') if you prefer it:
*'''Temporarily display the Menu Bar''': press the ALT key for the F10 key and make your selections from the temporarily displayed Menu Bar
*'''Toggle between the Menu Bar and Firefox button'''. Do one of the following:
**NOTE:
***Menu Bar '''checked''' = Menu Bar on, Firefox button off
***Menu Bar '''un-checked''' = Menu Bar off, Firefox button on
**keyboard shortcut: HOLD the ALT key while pressing the letters VTM on your keyboard
**Using the Menu Bar: click View > Toolbars, click Menu Bar
**Using the Firefox Button: click Firefox Button > Options, click Menu Bar
**right-click on an empty space in one of the toolbars, click Menu Bar
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

FF (ubuntu reg update) does not show and allow editing .odt .ods .eml files in shared dropbox

Similar Messages

Maybe you are looking for