Ff very slow starting up,sometimes i have to click on it again,and still wait awhile.

after turning on pc, (giving enough time to start up) i click on ff and it goes threw it's process trying to load ,and then it takes a few minutes to load my home page.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Similar Messages

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

After upgrade Photos quit unexpectedly and I have to click on reopen again and again...

Yesterday I upgraded to Photos, after that every time I try to open the application, it quit unexpectedly and I have to click on Reopen agin but after several time, nothing happen. How can I fix it? or Can I

What is the error message, when Photos quits? There is probably a panel with a "report" button. Press this button and copy and paste the first 50 lines of the error log into your next post.
Also, try to launch Photos with a new , empty library. Hold down the alt/options key, when you launch Photos and select to create a different library.

I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro.

I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro (8 Core 2.93GHz). When I run the Mac Pro with 2 x 2Gb RAM it takes 4 seconds before the gray screen, chime and spinning wheel appear.However when I expand the RAM to 20GB the grey screen and chimes appear after a long 20+ second black screen.
The RAM modules are paored 2 x 4GB Crucial CT51272BA1339.M18FMR and 6 x 2GB SAMSUNG M391B5673FH0-CH9, all DDR3 ECC.
Reading articles on the internet, I thought it may be damaged RAM modules, but I have completed memtest and all are okay. I have tried changing the pairs around and if I use any paired 2 modules the Mac Pro starts normally, only when I try running more than 2 modules the delayed start up happens. (black screen 20 Seconds)
I also have tried PRAM and SMU resets after changing the RAM setups, and the issues always occurs when I have more than 2 modules. As you can see I have 6 SAMSUNG modules and even with identical modules the issue happens, when increasing the RAM to more than 2 modules.
The Mac Pro runs fine after the start up screen and can see all the modules, but has anyone else come across this issue, or have any ideas as to why my Mac Pro is taking 20 seconds to start up with 20 GB RAM?

Hi there. Thanks for your comments.
I have tried all the different combinations of RAM setup, and as stated in my initial topic, the Mac Pro boot up time only slows when I have more that 2 modules. Where I place these does not seem to make a difference.
I have taken the Mac Pro to an Apple Reseller technician yesterday and they where not able to find any RAM errors. Apparently the boot up time is within Apple's acceptable parameters for this set up.
Could anyone that is running a Mac Pro 2009 with more that 4 modules of RAM, please let me know if the boot up time is normal. ( the time it takes from pressing the power button to seeing the gray screen around 16 - 20 seconds)
Or is anyone else having the same issues?
thanks for your responce

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!

For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting.

Very slow start when initially entering the service ticket in Web UI (2007)

We seem to encounter a very slow start when initially entering the service ticket in Web UI (2007). Once in all seems speedy enough. I don't have my access arrange for the Service marketplace (OSS notes) yet so can't check if there is a known solution, which I suspect there is. Has anyone encountered this problem and possibly resolved it?.
Jason.

Previous posts have highlighted the following notes:
1048388 General Performance improvements of BSP transactions
1162605 Network performance for CRM 2007 Webclient
1162685 SAP CRM 2007 Webclient Performance
821045 Poor performance of MIME objects in BSP pages
581316 BSP Delta-Handling for CRM (BASIS 620 SP17)
However, I was wondering whether anyone has come across any other small changes that may have a major effect. A quick-win I guess you call it. From bitter experience I know there are rarely quick wins when it comes to optimisation due to the amount of re-testing etc.
But any further advice would be welcome.
Jas.

I bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

i bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

Have a read here...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html

Lion very slow starting apps with Firewire 800 drive mounted. Any ideas?

Lion very slow starting apps with Firewire 800 drive mounted.
When my Firewire 800 drive is in sleep mode, when I start up an app like MS Excel or Addressbook. I get a spining wheel and a delay before the app launches. Any ideas? Never happened in 10.6.

Long shot: What format is the drive?
Regards
TD

B210a is very slow started to print wirelessly

I recently purchased a B210a which I'm using wirelessly from my Apple iPhone, iPad, and a Mac. It takes over a minute to start printing from any of these devices. I've now connected a cable from my iMac and it is still very slow starting. Any suggestions?

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installing 10.5.6 made Final Cut Pro very slow start up

After installation of OSX 10.5.6 (combo) , final cut pro 6.0.4 or 6.0.5 is very slow start up the application. I did all kinds of things such : Disc permission, DiscWarrior, Techo tool, but
it is very very slow to start up. When I re-installed final cut pro, it did start up right away,
then after restart, again final cut pro starts very very slow.
Please advice.

Hi Yuki,
It's very important to read the information regarding these updates before you install them. If you click the Apple logo top left in your Desktop then click Software Updates, when there is a system update available, there will be a link available for you to click and it will take you to all the information you should peruse before the update. Here is info on the 10.5.6 update. Apparently there are known 3rd party software issues. http://support.apple.com/kb/HT3194
First thing I would is check the disk for errors. You need your restore disk for this.
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click the Verify button. If DU reports errors, click the Repair button. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If you restart and it's still really slow booting up, you might want to UNinstall FCP. If you do, run Disk Utility and Repair Disk Permissions before and after you reinstall it.
Carolyn

Y410p very slow start up

The other day my laptop lenovo y410p fell from my bed on to the floor. It was on and fell from about 2 feet and there seem to no external damage to the laptop. However when I turned it back on it took about 5 minutes to boot up. It was too slow for me to use. I turned it off again and this time it would show an error saying that it could not find my desktop and it was only showing the recycle bin.
I am starting to think that the fall cause damage to the hard drive however I'm unable to know for sure since it's so slow that I can't use it. Do you guys have any suggestions as to what the problem might be, or what I should do.

Hi Johnayala,
Welcome to the Forums
As per the query we understood that you are facing issue with slow startup in your Lenovo Y410p laptop.
Try to run the HDD diagnostics and check for the issue.
Click here for the LSC diagnostics.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why sometimes I have to click twice on a Button?

Hello All.
I have a curiosity. Why sometimes I have to click twice on a button to its to run event?
For example, I have a button that changes the presence of a page for hidden, but I have to click twice on it to run the event.
Thanks

Srini.
Exactly this! My script was with error. Now It´s works very well.
Thanks you for your correct reply.

Network says "no service" and it sometimes do have 1 up to 3 bars and until the signal lost (iphone 3gs) ios6.0.1

network says "no service" and it sometimes do have 1 up to 3 bars and until the signal lost (iphone 3gs) ios6.0.1 help plzz...

Have a look at this it might help
http://support.apple.com/kb/TS4148

HT201412 I have tried all of the above and still can't get my ipad to respond

I have tried all of the above and still can't get my ipad to respond

Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues.

Ff very slow starting up,sometimes i have to click on it again,and still wait awhile.

Similar Messages

Maybe you are looking for