FF window too large when using extended desktop. Must reboot to return to correct size when I return it to the main screen.
I watch on-line videos on my HDTV by using "extended desktop" and sliding the FF window to the HDTV. The window becomes too large to access the controls to size it, or the top bar, to move it.
I can move FF window back to my pc by minimizing it on the pc toolbar, but when I "restore" it, it restores to the HDTV. I can not move it back to the pc, I also cannot re-size the screen
Hello. Thank you all for giving my some advise but I do not understand any of it.
I'm a bit of a technophobe when it comes to computers.
It is a Sony Vaio and there is a model number on the base of the laptop PCG-71911M. I have tried to look in the Control Panel to see if I can find its specifications but these days the system is too complicated for me to understand.
I did try seek out the information on the internet but just get a French site. Doh!!!
I use Nikon View NX software when I am viewing my images and again if I go to full screen for viewing the image the taskbar 'occludes' the little arrows I use to view the next image. When this happens I just click the little box in the far right edge of the taskbar and ViewNX 'disappears'. When I go back in and click on 'show desktop' it clears the taskbar. I can then easily access the buttons to move forward. Also when I am using PSE8 I have the same problem with accessing the buttons after I have completed my raw adjustments in the ACR window but it allows me to press the buttons with great difficulty if I can 'catch' the edge of the button and the ACR goes into PSE8 properly. I'm sorry that I have not explained myself well. At the present it looks as if the ACR window is too 'large' for the PSC5 window it 'sits upon'. It seems that it does not want to 'sit over' the taskbar. I have eventually fathomed that I can use Cntl and O to open the image (Open Image button) but this is not the least bit satisfactory. I don't know how I am going to access the other options eg 'done' and 'cancel' and 'save image'.
Thank you all once again and any help - but idiots' language please - would be gratefully accepted.
Jacqueline.
Similar Messages
-
Program windows too large after using migration assistant
This seems like a silly question. I just got my MacBook for Christmas and I used Migration Assistant to transfer everything from my iMac to the MacBook. It worked great except that the sizes of the program windows remained the same as well, and they are too big on this 13" screen for me to access things that are way down on the bottom of the window. I can't get a hold of the corner tab that allows you to resize the window manually because it is off the bottom of the screen. I did try minimizing/moving the task bar from the bottom of the screen, but the windows are still too big. I discovered the problem in iTunes, but I suspect it is universal. I'd appreciate any help you can offer! Thanks.
to doc m
I was having problems with my photo booth, when i'd open it up i could only see half of the pics that I had already taken. I couldn't delete them or anything. After reading what you wrote it had dawned on me, maybe it could have been the screen resolution. I followed your steps and now I can delete the pics I didn't want & I can also see the full photo booth thingy [:
even thou I didn't ask a question, you answered mine & thank you very much [: -
So after install of Mountain Lion (never happened before) my desktop crashes and it returns me to the login screen. After I login I have to restart all my apps.
One morning this happened 5+ times in under an hour. So my productivity has gone down :-(
I work around this by only running three apps (finder, terminal & firefox), and then it sees to only happen 2-3 times a day...sigh.
The only other odd thing and have no idea if it is related is that firefox was showing some animated image from the olympics and when I had it on one screen it was fine, when I had the window on the other screen, the image was not the right image, it looked like it had reached into the screen buffer of other applications and was displaying that (e.g. where there was a scrolling flame for the right image, there was some scrolling upside down text from my terminal when I had it on the other screen where the flame was supposed to be).
An help on how to debug/solve would be helpful.You're welcome. If you use Zoom often try the new show controller feature. It's below where you turned zoom off. Once you turn it on you can use it to turn Zoom on and off. Plus you can use zoom as a magnifying glass instead of full screen.
-
Two file windows disappear if I use extend screen to compare 2 lessons
I use a laptop and an extra screen in "Extended" mode. I drag out one file window from Captivate and maximise it to the full screen size. I drag out the other file window, and make it as large as possible on the laptop.
When I move to another app (e.g. Outlook) , I lose both these file windows and can't find them again without closing them and reopening them. Usually, if Word is in the extra screen, it still shows as a window in the task bar. This does not happen for the Captivate file windows despite having the standard functionality window controls.
My question is where in Captivate can you bring back these files when they disappear? I checked the windows menu but to no avail.Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/ -
Using extended desktop mode with ThinkPad x220
I have an Acer AL2216W external monitor. It has a resolution of 1680 x 1050
http://support.acer.com/acerpanam/monitor/0000/Acer/AL2216W/AL2216Wsp2.shtml
When I use extended desktop mode with the external monitor set as the primary display, everything scales properly on both the external and internal monitor.
However, if I set the internal monitor as the primary display, the external display does not fill the screen (there is a big black border around the desktop).
In both cases, the resolution setting for the external monitor is 1680 x 1050.
Is this normal behaviour?
Solved!
Go to Solution.Hello,
That's how Windows behaves. Supposedly Realtime Soft Ltd.'s UltraMon gives you more precise control over wallpaper under Windows, but I have not used it myself.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Running 10.4.11 finder window too large need to get lbak to default.
running 10.4.11 finder window too large need to get lbak to default.
Hi again BDA...
I'm not certain if it will work on other windows. I am more concerned with it working with the Firefox interface and did not try it on an alternate window.
On Sep 4, 2012 2:47 PM (in response to Alexander_Apple) you said:
"Firefox uses it own settings & Method for that"
That does make sense which is why I asked if any of the Mac gurus know where in Firefox I go to change the setting. I wasn't really keen on adding another 3rd-party app to my machine. There must be a simpler route to take. Maybe change a preference in Firefox 3.6.28 or in the Displays Preferences? My display is a Samsung LED monitor Model NO. SMBX2235. My Displays Preferences are: "1920 x 1080 @ 60 HZ (NTSC) Millions" but, having not changed them since first setting up the monitor, I'm fairly certain it's not the Displays Preferences. Is there a chance I hit a Function key plus a letter or number one day when typing? I don't recall doing so.
Thanks for all your suggestions BDA. I find it's a bit confusing when you type the word "Windows" with an uppercase "W". Windows to me is something used on an IBM compatible computer. I, personally, do not consider one computer to be better than another. They each have their own advantages and disadvantages and each type of machine can handle certain apps better than the other machine.
Thanks again BDA. I hope you have a great day!
AA -
Trying to use extended desktop
I typically use my 13" MBP with a 20" LG monitor in extended desktop mode. I would regularly plug in my computer when I got home to do work, and unplug it when i left the next morning. I hadn't used extended desktop for a few days, and the next time I plugged in the monitor, it came up with weird resolution with a different aspect ratio and an off center picture. The option for 1600 x 900 at 60Hz isn't listed in system preferences anymore. Do I have a hardware problem here?
Note: I did switch to a shorter VGA cable to reduce clutter on my desk before this problem occurred, but I can't get extended desktop to work properly with my old cable, so I don't think its a faulty cable.OK open System Preferences/Displays and click the Colour Tab
Does a Profile appear in the left hand column that matches the name of your external monitor ?
If others appear try selecting one of them and then going back to the first
Uncheck "Show profiles for this display only' then try selecting some alternatives to see if this kicks it into action.
Also, try selecting the display profile then clicking 'Calibrate' and run through the adjustments and see if that brings it right.
If none of those work try /Utilities/Colorsync Utility and click Profile First Aid then Repair. -
How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.
Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.
-
How best to link 2 MacBook Pros and use extended desktop
OK- I have two MacBook Pros- one 13" MacBook Pro 2.66GHz and one older 15" 2.4GHz but generally only use the smaller 13". Since I quite like using my Final Cut Pro on my Mac for HOURS on end, I would reap benefit of being able to rope in the older one for extra "extended" desktop space.
I understand that I am probably going to have to use something like Screen Recycler? Because I cannot see the option to use "extended desktop" on System Preference (which may be because, as yet, they are not linked) but is that the best option?
Also- what physical connection should I make between the two? What cable?
Please and thanks kind people on this Oh So New And Shiny Forum.ScreenRecycler is your only option, but you may find that the second screen isn't responsive enough for video editing. An external monitor would be greatly preferable to using your second MBP that way.
You can read all about how it works and how to connect your machines on the ScreenRecycler web site.
http://www.screenrecycler.com/ScreenRecycler.html -
Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.
Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button. -
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.
Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files. -
I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?
Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you! -
I've downloaded ADE 4.0.3, apparently successfully, and I 'Close the 'Completed' window. But, when I attend to run the program, I get an hourglass for about 2 seconds and then ... ... nothing! Clearly I can't authorize my computer for download. Ideas?
Try restarting your machine and Launch ADE again
-
my 5s screen is stuck on extra large size, making it hard to login and impossible to reach the bottom of the main screen for phone or Internet.
Try pressing the Apple button, below the screen, 3 times in succession to toggle the screen back to normal size.
Maybe you are looking for
-
[solved] samsung ml-2010, i can't get it to work!
hello! is anyone here, who successfully prints with a samsung ml-2010? i've everything (installing splix, installing samsung driver, google...) but nothing! i can send a print jo, but the printer does not do anything! please help... thanks, mfg iggy
-
It´s possible to quit "Show Complete album" message in my iPhone music?
I have this problem with different albums in my music, it also appears on iTunes but it´s okey, the only problem is that It´s annoying to me to watch it all the time in my iphone while I am in the album and sometimes I touch it accidentalIy and all t
-
Repeatedly connecting to certain websites since using Firefox 7
I connect to a website and it displays as expected. I move my cursor to the page and it disappears, waits for the connection, connects, disappears, waits, connects, and so on. It's only a few sites and it's only since upgrading to 7. Example site pro
-
Hi I would like to know the purpose of condition tables?? How do we retrieve the data from these tables?? Thanks&Regards Rama
-
I had an update for iMovie, but it won't update with out iOS 6, how do I update the software to ios 6?