FF4 has screwed up my fonts in FF36.16

I downloaded and installed FF4. I did not like it so I reinstalled FF3.6.16. Now my fonts are all screwed up. Apparently the fonts from FF4 have not been replaced with the re-installation. What should I do? Is there a factory set of options I can put into place to fix this?
Thank you
Mike

Since I did not have a backup of my Domain file (like many here I didn't even know where it was since iWeb always started up with it), it was a surprise to me when iWeb08 had to ask for it. My question is this.
The files including photos on my website (iDisk) are still ok since they did not get updated before iWeb08 crashed. Only my Domain files are all screwed up. Can I somehow remove iWeb08 and reinstall the previous version of iWeb which worked fine, and use the iDisk files to recreate my HD Domain files??
I really need help on this one. Has anyone done it?
Thanks in advance.

Similar Messages

  • ITunes 10.1.6.7 update has broken my foreign font display - Asian characters are now squares. How do I fix this?

    The iTunes 10.1.6.7 update has broken my foreign font display - Asian characters are now squares.
    They are fine on my iPhone, copying to other documents & through the Last FM scrobbler, yet iTunes shows songs incorrectly. I've fiddled with the ID3/Unicode settings - nothing changes.
    For example: iTunes shows a bunch of squares, yet when I copy and paste them here it becomes ~  일렉트로보이즈
    This was not a problem earlier - everything was fine in the four years or so I've used iTunes until, I believe, this update. If it was not the update, I'm not sure what else it could be?
    Any suggestions on how to fix this? Thank you!

    Thank you so much! I vigorously searched around these parts and the general internet before posting and found nothing - it's so simple, too
    Hahaha, turns out it was Windows, not iTunes, that broke my font

  • My adobe garamond font has disapeared from my font book any ideas on how to get it back please?

    My adobe garamond font has disapeared from my font book any ideas on how to get it back please?

    Got it sorted

  • This site has screwed up my username. How do I correct it?

    This site has screwed up my username. How do I correct it?

    Once established, name does not change.
    But you can abandon the old one to non-use and make one that you want.  Usually when someone has points they do not want to abandon it causes issues, but you have 0 points, so are leaving nothing behind.

  • I group messaged from my ipad and this has screwed up the way my messages are reveived by my friends (it creates new threads in their phones with my email in place of my contact name) I've stopped messaging from my ipad but the problem remains. Any help?

    I have an iPhone 4S and use the group texting feature ALL THE TIME. I recently updated my iPad to the latest software and made the colossal mistake of continuing my group messaging from my iPad while connected to wifi. Doing this has successfully screwed but every group text thread I am in, to the point where its very hard for those involved in the thread to keep up. When I initially messaged those I was already engaged in text threads with it created a new thread in their phones replacing my name in their phones with my email. At first this was not a big deal but ever since then the people I am messaging have become increasingly frustrated with how my messages come through. If I am messaged in a group text and respond to it, sometimes when I respond it will create an entirely different thread in my recipients phones. So at that point they have to switch threads in order to read what I wrote. The new thread that my phone creates will send the message under my email not my name (related to the contact they have me saved as in their phones). The worst part about it is that there seems to be no rhyme or reason to why or when my phone will send the message as normal or under my email like it did with my iPad. I haven’t messaged from my iPad since these problems immediately began a month ago but the issues still continue. I have tried everything to get this to stop, I’ve turned off my wifi, I’ve had my friends delete the threads that my messages create in their phones. I’ve had them delete my email in their contact lists and nothing has worked. Can you help me? Any info you could provide would be greatly appreciated.
    Note: My phone message no different whatsoever. All the threads have remained the same. The issue is what it is doing to the people that I am messaging.
        Best Regards
             Rick Mulhern
    Message was edited by: Rickapplehelp19

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • Has the issue with font licences and embedding fonts in a dynamic PDF been solved?

    Hi all,
    Can I check if this issue has been fixed in LiveCycle yet please?
    http://forums.adobe.com/message/3724557
    Issue is that although LC lets you specify what typeface should be used for the caption/value in a form, it cannot discern the corresponding licencing requirements.
    So in the case where even though a particular font isn’t used for any editable information – being set as the caption only – LC requires a font permitting embedding for editing, otherwise the font is not embedded at all and therefore is substituted for another typeface on a system where the font isn’t available.
    Seems LC needs it's embedding requirements to catch up with the usage of type in a dynamic PDF, as in cases where the fonts bundled with Reader or system fonts aren't suitable, such as when a visual standard needs to be met, the user may not be overly keen on paying a significant financial penalty for editable font licences.
    Thanks
    James

    Hi James,
    I don't think that it the case at all. If the font has a license for enbedding then that is what happens:
    I accept that some fonts come with expensive "embedding for editing" licenses, but Adobe's implementation is in line with the font industry's expectations.
    I don't think this is a "bug" that will be fixed.
    Niall

  • Sent mail has not the default font

    Hi,
    Users complain that Groupwise changes the font when they use the "sent to" option in Microsoft Word. Has this behaviour changed since Groupwise 8? How can I set the font so that it is the same in every situation?
    We use Groupwise 2012, version 12.0.1.16521.
    Many thanks in advance.

    Hi Joost,
    I've done some checking with Novell and it would appear that this is a bug in the GroupWise 2012 client - Bug 796126 - Default font changes, using mail to from Excel and Word
    The bug describes exactly the symptom that you are seeing, and, was not present in the V8 of the client. Unfortunately I do not know when the targeted date for a fix will be
    Cheers,

  • Yosemite has screwed up my mac

    I upgraded to Yosemite a few days ago. Since then everything has gone haywire. I can't open any files by double clicking anymore, I have to right click, hit open. When I go to move my screen, instead of moving it, it stops on a tab and move is or opens a new one in my browser.   I can't seem to  highlight and copy any text, and if I can,  it won't highlight everything, it just stops in mid word or sentence.  If I try to drag anything on my desktop to put in a folder, instead of dragging, it opens it up.
    I ran a virus scan with bit defender and found a windows virus, but I deleted it.
    This has all started since I upgraded to Yosemite.
    Can anyone help me?  Please.
    A.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Text Problems, When Previewed It Has Moved And Changed Font

    Hi, i have written boxes of text using layers, and on all of
    my pages, the font (apple chancery) and font size are changed when
    previewed in Safari. Im new to dreamweaver so havent got a clue of
    the problem, but illl prosume its basic. Can anyone help?!
    Ill give you the code if that makes things easier to
    understand, please help!
    Thanks very much, Ashley

    > Hi, i have written boxes of text using layers
    This is trouble right from the start. See
    http://www.great-web-sights.com/g_layer-overlap.asp
    to see why I say that.
    While you are learning, your best bet would be to avoid
    layers altogether
    and concentrate on using tables (not layout mode!) for
    placement on the
    page.
    Also, you need to use only fonts/font families that are 'web
    safe', i.e.,
    those that you can be certain everyone has installed on their
    system. Apple
    Chancery is not on the list -
    http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Ashley272" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hi, i have written boxes of text using layers, and on
    all of my pages, the
    > font
    > (apple chancery) and font size are changed when
    previewed in Safari. Im
    > new to
    > dreamweaver so havent got a clue of the problem, but
    illl prosume its
    > basic.
    > Can anyone help?!
    >
    > Ill give you the code if that makes things easier to
    understand, please
    > help!
    >
    > Thanks very much, Ashley
    >
    > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN"
    > "
    http://www.w3.org/TR/html4/loose.dtd">
    > <html>
    > <head>
    > <title></title>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1">
    > <script language="JavaScript"
    type="text/JavaScript">
    > <!--
    > function MM_reloadPage(init) { //reloads the window if
    Nav4 resized
    > if (init==true) with (navigator) {if
    >
    ((appName=="Netscape")&&(parseInt(appVersion)==4)) {
    > document.MM_pgW=innerWidth; document.MM_pgH=innerHeight;
    > onresize=MM_reloadPage; }}
    > else if (innerWidth!=document.MM_pgW ||
    innerHeight!=document.MM_pgH)
    > location.reload();
    > }
    > MM_reloadPage(true);
    > //-->
    > </script>
    > <style type="text/css">
    > <!--
    > body,td,th {
    > font-family: Apple Chancery;
    > font-size: 36px;
    > font-style: italic;
    > color: #000000;
    > }
    > .style4 {font-style: italic; font-size: 36px;}
    > a:link {
    > color: #000000;
    > text-decoration: none;
    > }
    > a:visited {
    > text-decoration: none;
    > color: #000000;
    > }
    > a:hover {
    > text-decoration: none;
    > color: #000000;
    > }
    > a:active {
    > text-decoration: none;
    > color: #000000;
    > }
    > a {
    > font-size: 36px;
    > font-style: italic;
    > }
    > .style8 {
    > font-size: 18px;
    > color: #FFFFFF;
    > }
    > -->
    > </style>
    > </head>
    > <body>
    > <div id="Layer1" style="position:absolute;
    width:200px; height:115px;
    > z-index:3; visibility: visible;">
    > <div align="center"><img src="2,-News.gif"
    width="800" height="600"
    > border="0" usemap="#Map">
    > <map name="Map">
    > <area shape="poly"
    >
    coords="30,223,19,233,25,243,26,258,22,271,23,291,26,311,41,307,67,309,94,309,12
    >
    9,309,153,306,170,310,192,305,205,311,228,306,259,299,293,297,301,295,302,277,30
    > 2,258,303,241,309,233,306,224,306,214"
    href="index.html">
    > </map>
    > </div>
    > </div>
    > <div id="Layer2" style="position:absolute;
    left:149px; top:357px;
    > width:95px;
    > height:58px; z-index:4; font-size: 36px; font-style:
    italic; visibility:
    > visible; font-family: "Apple Chancery";"
    class="style4"> News</div>
    > <div id="Layer3" style="position:absolute;
    left:145px; top:426px;
    > width:111px;
    > height:58px; z-index:5; visibility: visible;
    font-family: "Apple
    > Chancery";"
    > class="style4"><a
    href="media.html">Media</a></div>
    > <div id="Layer4" style="position:absolute;
    left:119px; top:495px;
    > width:170px;
    > height:60px; z-index:6; visibility: visible;
    font-family: "Apple
    > Chancery";"
    > class="style4"><a
    href="biography.html">Biography</a></div>
    > <div id="Layer5" style="position:absolute;
    left:148px; top:566px;
    > width:77px;
    > height:48px; z-index:7; font-family: ; visibility:
    visible;"Apple
    > Chancery";
    > visibility: visible;" class="style4"><a
    href="live.html">Live</a></div>
    > <div id="Layer6" style="position:absolute;
    left:407px; top:74px;
    > width:49px;
    > height:26px; z-index:8; visibility: visible;">
    > <p><strong><span
    class="style8">News</span></strong></p>
    > <p> </p>
    > </div>
    > <div id="Layer7" style="position:absolute;
    left:404px; top:253px;
    > width:327px;
    > height:91px; z-index:9; visibility:
    visible;"><span
    > class="style8">14/05/06 -
    > National Club are currently working on new material,
    ready for gigging and
    > recording come summer! </span></div>
    > <div id="Layer8" style="position:absolute;
    left:405px; top:119px;
    > width:325px;
    > height:156px; z-index:10; visibility:
    visible;"><span
    > class="style8">26/05/06 -
    > Most of the new material is ready, with demos already
    being made. More
    > songs
    > will be available in the Media section a.s.a.p!
    </span></div>
    > </body>
    > </html>
    >

  • I was rubbing my keys and screwed up my font setting. i don't know how to reset the font to original mozilla setting

    i was rubbing my laptop keys. i must have hit the right key sequence to change the font setting. i don't know how to reset the font. i was in mozilla at the time, so only it was affected. IE still uses the correct webpage fonts. IE has a reset on their browser, does firefox?

    Have you tried closing Firefox and visiting the site again without restoring your session? This will bypass any temporary changes.
    If the problem is the font size, you can reset the zoom level:
    View menu > Zoom > Reset
    If you have the orange Firefox button, tap the Alt key or press F10 to display the classic menu bar where you will find the View menu.
    If that doesn't help, can you describe what's different in more detail?

  • HT2509 Why has apple not ditch font book yet? The software causes more problems than it is worth using.

    How can I ditch font book and remove from my computer? It causes nothing but problems and I prefer to use Font Reserve which runs smooth on my Macbook Pro with Retina.

    iOS4 has been working fine for me.
    What troubleshooting have you done?
    As far as the app, have you contacted the developer to let them know that their game crashes in iOS4?

  • DVD burn has SATURATED reds, yellow font doesn't show well as iMovie file

    hello all. I am burning a DVD for a film festival submission and I am running across a color problem. I am on a PowerMac G5 last version running 10.4.11 using Toast to burn a DV or MOV file of the movie. the result is a DVD where all the reds come out in the picture. The actors faces have visibly more red in them. Yellow fonts for the credits do not show well. The iMovie project and DV and QT files all look great. Can anyone help on something I may be doing wrong? This is for a film festival submission, the film has a great chance to make it, and this burn makes it look terrible. HELP!

    Hi
    Strange - only thing that comes to my mind is when I added some photos to a movie
    they where .bmp from a PC
    Very red !
    What kind of material did You use to make Your movie ?
    • .avi, .wmv, .wma, .mp3, .mp4, .m4p, .jpg, .tif, .aiff, streamingDV from miniDV tape
    Camera, miniDVD or else ?
    What DVD did You use ?
    • Brand
    • Type - DVD-/+RW ?
    • Single Layer or DL
    Free space on boot hard disk - How much ?
    Version of QuickTime ?
    Yours Bengt W
    Yours Bengt W

  • DVD burn has SATURATED reds, yellow font doesn't show well

    hello all. I am burning a DVD for a film festival submission and I am running across a color problem. I am on a PowerMac G5 last version running 10.4.11 using Toast to burn a DV or MOV file of the movie. the result is a DVD where all the reds come out in the picture. The actors faces have visibly more red in them. Yellow fonts for the credits do not show well. The iMovie project and DV and QT files all look great. Can anyone help on something I may be doing wrong? This is for a film festival submission, the film has a great chance to make it, and this burn makes it look terrible. HELP!

    Typically this forum supports the color grade application "COLOR", part of the Final Cut Studio suite.
    What you have appears to be a compression problem.
    Try exporting your Quicktime as an explicit m2v file for use with either Toast or DVD Studio Pro.
    jPo

  • Quicktime screwed up javascript & fonts

    I got a new computer and it was running fine until I downloaded Quicktime/Itunes for windows. Now some of my fonts have changed. And javascript popup windows no longer work. I uninstalled quicktime/itunes, but the problems remain.
    Can anyone suggest a solution? Help!

    QuickTime Player has nothing to do with the fonts on your PC.
    It also doesn't have any control over javascript and your browser.
    You've got some other issue and maybe some other Site could give you a better answer.
    You can't find an answer here as to the cause but can be assured it wasn't a QuickTime install issue.

  • Yosemite has changed my menu font.

    Yosemite has changed my font for the toolbar menu at the top of my iMac. Can I change it to something more easily legible for me?

    No. The font changed from Lucida Grande to Helvetica Neue with OS X Yosemite. This was a publicized change. It looks glorious on retina machines; it's perhaps slightly less legible on non-Retina machines.
    You can't change the system font, without resorting to hacks which could cause system instability.

Maybe you are looking for

  • Windows 8 error code

    Trying to load recovery disk for Win 8 receive error code OxeOef0003.  What does the code indicate?

  • 7-pass erase: did it work?

    Hello, I posted this question at the end of another thread, but I thought I'd start a new one.. I'm selling my old iMac G5 20" (purchased in '05) and erasing personal data for security reasons, etc.. I booted from install disk and set my mac to 7-pas

  • Release

    Hi All, Purchase Order was created and approved with Release Strategy 11 PO Value was reduced on 9/8/08 to close the PO..When closing a PO a new release strategy should not be applied. I don't want to reset release when PO line deleted or Reduce PO v

  • How do I view open office documents on ipad4?

    I can't open my pc documents on my iPad. They are either open office or Microsoft.

  • Reset the Current Number in the Number Ranges

    Hello Friends, Is it possible to change the current number in the number range based on a condition? My requirement is,  I have generated the number using the Function Module NUMBER_GET_NEXT.  If the user clicks on Save then the number generated is s