FF4 Panorama is cool, but it doesn't save when FF is closed?

I tried the new FF4 Panorama feature, it's cool. But doesn't it save my work? When I close FF and reopen it, all named tab groups are gone...:-(
And... the troubleshooting information doesn't fit in to the box below. Max chars: 30,000. Not enough for my Ubuntu (37,000).

App Tabs and Tab Groups (Panorama) are stored in sessionstore.js as part of the session data, so make sure that session restore is enabled and working properly.
Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Similar Messages

HT4059 When I have a PDF that I want to open and save into iBooks - it will attempt to open it and the shelf flips around to make room for it. But it doesn't save it. I have to end up opening it in Adobe or Kindle app to view & save it.

When I have a PDF that I want to open and save into iBooks - it will attempt to open it and the shelf flips around to make room for it. But it doesn't save it. I have to end up opening it in Adobe or Kindle app to view & save it. This has been doing this awhile, what's wrong. Should
I take it and have it looked at?

is there any important stuff saved to your emails? if so you could log on to your emails from a seperate device and back them up. im not sure what else you could do :/

Hi I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from t

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help. I also found disk erros and reaoired permissiomn and the restarted and did disk utlty again and repaired the same disk errors and then did a restart and still does not remember passwords or ask me. Did all this still no luck it saved apple login on here and saved gmail account but others one it used to save does no longer.here is what i did below and still no luck.
Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

My ipod is on but it doesn't responds when I touch it.what do I do!?, my ipod is on but it doesn't responds when I touch it.what do I do!?

my ipod is on but it doesn't responds when I touch it.what do I do!?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking.

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
Thanks!

Hello jon713,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
App Store Application data (except the Application itself, its tmp, and Caches folder)
Application settings, preferences, and data, including documents
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
To transfer iTunes Store purchases from your device to a computer, follow these steps:
Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
Click the Transfer Purchases button.
Have a nice day,
Mario

Vivado hardware server "hw_server" process doesn't close when server is closed

Vivado hardware server "hw_server" process doesn't close when server is closed.
Also, the connecting to the server hangs if a device is physically disconnected and reconnected (usually).
The "hw_server" process continually has to be killed via Task Manager, Vivado has to be closed and reopened sometimes as well.
Using Vivado 2014.1
Please fix this.

I'm on 2014.1 as well (Win7-64). I have a similar problem with 2 different PCs running the same setup. The Hardware Manager hangs while attempting some activity (usually reconfig). I click "Cancel" to dismiss the activity, which causes all of Vivado to hang. Seeing no other option, I kill Vivado in the Task Manager. However, this has the unfortunate side effect of leaving an orphaned hw_server process that can't be killed by any means, thus requiring a reboot of the PC.
This is monumentally annoying.
Can someone comment on whether this is due to a known issue, and if it's fixed in 2014.2?

Report works fine in VS2010 but simply doesn't show when published

Problem:
Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
Background:
Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server. IIS 6 is running. My web-server and VS2010 is on the same box.
I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on) on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet). I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue on the dialogue box that comes up because of the hiccup will allow testing to continue. Here's a screen-shot of this recurring hiccup.
http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt file. I solved this by setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source' did i see some remnants of the crystal report viewer.
Here is the Report.aspx page when tested in VS2010:
[http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
[http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
Details of adding report to my web app:
1) Populate my dataset then write the XML schema, reportschema.xml
2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
[http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
3) I formatted the report the way i wanted it
4) Added the Crystal report viewer on the Report.aspx page
5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
That's it. As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
However, the issue is limited to compile time and does not affect a completed application.
Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
"I proceeded to try to browse to my app from another computer on my network."
This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
Ludek

Charger works when notebook is off, but it doesn't work when the notebook is on.

I have a HP Pavilion dv6-3070tx Entertainment Notebook PC.
My charger doesn't work when the notebook is on and plugged in, but when the notebook is off (or even when it is in sleep mode) it gets charged. I tested this by using different chargers that work in other hp notebooks. If this can be solved, I'll be grateful.

Hi
There are two structures of DVDs
• Data-DVD - as burned from DeskTop/Finder
• Video-DVD - to be played on a DVD-Player - Needs a program that can do this
One can in iMovie - Export as QuickTime .mov and save this via DeskTop/Finder onto a DVD - BUT this will only play on a Computer and if it is a Window-PC this needs to download QT-player or VLC-player.
But no DVD-player for TV can play back this.
To get a Video-DVD then You need
• iDVD (not from Apple any more) - or -
• DVD Studio Pro (not from Apple any more) - or -
• FinalCut Pro-X (can do simple Video-DVDs) - or -
• Burn - http://www.digital-digest.com/software/Burn.html - FREE - but very PLAIN - no fancy things at all.
• Roxio Toast™ 11 Pro - Fairly advanced - and costs a bit - still very Good and lot's of great tool's included. (I love it) - Can also back convert home made DVDs to an editable mode in an OK quality. With BD-component also capable to do sort of Blu-Ray DVDs.
Yours Bengt W

My iPad air doesn't sleep when case is closed

My new iPad air doesn't sleep when the cover is closed, the cover was advertised with this feature any suggestions ?

https://discussions.apple.com/thread/5165951

I already have PS elements 12. I just installed PS elements 13, but it doesn't open when I go to pictures, only PS Elements 12 opens. Should I uninstall PS elements 12?

I now use Photoshop Elements 12 on my computer. I just installed PS Elements 13. But PS 13 icon does not show up on my desktop and when I open a picture, PS Elements 12 opens it. Should I uninstall PS Elements 12? If I do, will I lose my pictures?

You may set PE 13 as default program to open pictures.
If you are on window Right click on the file which you wish to open and click on propeties.
Then Right to "open with" click on change and select Photoshop Elemets 13, then click on Ok, Apply.

I export an image in Aperture 3 but it doesn't save the alterations.

I'm new to Aperture after using Photoshop for years. After I have made my alterations in Aperture 3 (instead of the save function in Photoshop) I export the 'version' as full jpeg however the alterations I've made do not appear in the exported jpeg. Am I doing something wrong here or is my Aperture faulty?
Many thanks

I just tried the email TIFF export and no luck. The red eye correction is lost. It's also lost on JPEG exports as well as any sharing to Flckr or Facebook.
I've had Aperture for a while now but only recently had to use the on-board flash for dark location. I've never had to deal with red eye before.
Here a photo where it exported the version with one corrected eye and one still red.
http://cl.ly/800c18ee6d927872b453

Installation - Photoshop has installed, but it doesn't open when I select the program?

Has anyone else had a similar issue?

Thanks for the reply
It makes perfect sense - ...now... - will keep in mind next time I get stuck. The problem somehow resolved itself.
Enjoy your day.
Tabita

I have a checkbox on my page, but it doesn't refresh when I refresh my page after I changed it's status.

1.I open a webpage which has a checkbox without checked
2.I clicked this checkbox, so it's checked
3.Then I refresh this page, the checkbox still checked rather than unchecked;

You need to do a hard refresh and bypass the cache to reset such form data.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)

FF4 Panorama is cool, but it doesn't save when FF is closed?

Similar Messages

Maybe you are looking for