FF4 will not work on my PowerPC G4, os 10.5.8

My Power PC G4 with OS 10.5.8 will not support Ff 4 because "the architecture is not supported" says the pop up.

What you need is an FTP program, not a photo editor, by the sound of it. Cyberduck is good and also free. Or perhaps you need an HTML editor or something. PSE is not designed to post images onto an existing website, although you can create an HTML gallery, but you wouldn't normally use that for product display, more for sharing your vacation photos or something like that.
However, if you also want a photo editor, the requirements for PSE 6 are:
PowerPC G4 or G5 or multicore Intel processor
Mac OS X v10.4.8 through 10.5
512MB of RAM (1GB recommended)
64MB of video RAM
1GB of available hard-disk space (additional free space required during installation)
1,024x768 display resolution
DVD-ROM drive
QuickTime 7 software required for multimedia features
Internet connection required for Internet-based services

Similar Messages

  • I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

    I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

    #A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
    #The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
    #To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
    #*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    #**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    #*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
    #*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    #*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

  • FF4 will not open after download... "you can't open the application "firfox" because it is not supported on this application." If 4 doesn't work on OS 10.5.8, then how do I get the old firfox back?

    I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
    I have OS 10.5.8
    If it will not work, how do I get the old version of FF back?

    Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
    I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
    Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button.

  • I am on Mac OS 10.6.7 and Java Plug-in 2 for NAPI will not work in FF4.0?

    When trying to attend a webinar which uses the Java 2 NAPI plug-in I get an error message in FF 4.0 saying I need to install thiis plug-in, which is already installed. I have gone to the add-on manager and disabled this plug-in restarted and enabled it again, but it still will not work.
    Any ideas?

    I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • How do I shut off the plug in. I using mac OS10.4.11 and I keep getting a bar to update my plugin. The plugin will not work with os10.4.11. Everytime I go to a

    every time I go to a new site a bar is lowered and ask to update my plugin. I am using mac 10.4.11 G4 The new plugin will not work. How do I shut off the plugin update so I don't get this anoying bar ever time I go to a new web page. If there is no way to shut it off, I'll trash Firefox and go back to Safari. This just started and I'm tired of it.

    to turn off the messages about outdated plugins, enter "about:config" into the address bar of the browser, confirm the info dialog, then search for the preference named "plugins.hide_infobar_for_outdated_plugin" & double-click it in order to toggle it to "true".
    please also note that firefox 3.6.28 was the last build that ran on a powerpc, however if you want to use an up-to-date browser based on firefox you can switch to "tenfourfox" - the downside is it doesn't support plugins at all
    [[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]]

  • URGENT: Sorry, Expander will not work without the Stuffit Engine...

    hallo,
    I want to watch a show of myself on Time Warner Cable TODAY live ONLINE while being in Europe, so it is urgent:
    sometimes when I try to install a software I get the following error message:
    'Sorry, Expander will not work without the Stuffit Engine. Please reinstall the original installer.'
    Just now I wanted to install 'Windows Media Player 9 for Mac OS X' and got that error message. Any suggestions?
    THANKS YOU!
    1 GHz PowerPC G4 (3.3)   Mac OS X (10.4.7)  

    "Any suggestions? "
    Obviously you need to reinstall Stuffit Expander. Download it from Stuffit.com.
    Also, forget about Windows Media Player. It's out dated, and not even made anymore. Download the free Flip4Mac QuickTime plugin from Flip4Mac.com
    Hope that was urgent enough...

  • Itunes, Iphoto, Imovie, Disc Utility, Idvd will not work

    Can someone please advise.
    Itunes, Iphoto Imovie, Idvd will not work. All of my related files are there ie, all my music and photos but the actual programmes will not open. I read about using the Disc Utility but that will not open either. When I try to download say Itunes or Iphoto and lick on the download safari opens on google?
    Please does anyone know what is wrong?
    Its a PowerPc G5.
    Cheers Mary

    Our powerbooks can not run iMovie'08. Not enough horsepower.
    That is why we are offered a free download of iMovie '06.
    Joe

  • Lion - 2004 MS Office for Mac will not work

    My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
    Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.

    Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

    YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
    I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

    You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I was using Lightroom v5.6 when a notice came up to update to v5.7.  I did the down load but must have gotten a bad down load because it will not install.   And the old 5.6 on my desktop will not work.   So no 5.6 or 5.7 . any ideas  how to get something

    I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install.  And the 5.6 version will not work now either.   So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech.   Any help will be appreciated.

    My iPod is a click wheel...I think that's fifth generation?
    I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
    I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

  • Flash player will not work on my computer, would love advice

    I have windows vista.  When I visit a web page that requires flash, it instructs me to download it (even though I'm sure I have it ialready...).  I do so, it says it has downloaded successfully but I still cannot view the website.  I have uninstalled my current version of flash and reinstalled the latest version numerous times.  It even shows up in my list of programs.  But each time I visit a site that uses it, it tells me I need flash to view it.  Very frustrating.  And suggestions would be appreciated.  Thanks!

    This was very helpful - thank you.  I unchecked "active x filtering" and it seems to be working, under tools in IE.  a simple solution, that may have taken me days to figure out myself!  Hopefully it continues to work from thiis point forward.  Thanks!
    Date: Tue, 16 Apr 2013 12:42:26 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash player will not work on my computer, would love advice
        Re: Flash player will not work on my computer, would love advice
        created by Chris Campbell in Installing Flash Player - View the full discussion
    Do you see an animation and version number when you visit the Flash Player Version page? If you are using Internet Explorer, please verify that the following two FAQs check out. Enabling Flash Player in Internet Explorer ActiveX Filtering in Internet Explorer
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5240948#5240948
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5240948#5240948
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5240948#5240948. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Installing Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • External hd that I used for data died... it is backed up on time machine... how do I restore all my data from time machine to a new external hd?

    I installed the Lion OS this weekend. After Spotlight tried to index my external hard drive (that I use to store all my data), the external hard drive died. I expected that to happen at some point. The hard drive was an old FireWire 400 LaCie that I

  • Searchbar broken in v23, and problem with add on - js related?

    Since upgrading to v23, the searchbar no longer functions - I can enter search terms, but the drop down appears on my second monitor, and when hitting enter, nothing happens - i.e. searching from the search bar no longer works, for any search engine

  • BADI & USER EXITS

    Hi experts , i want add two feild for street in TCODE FPP1(Business Partner creation) in SAP-ISU. can anyone tell me step by step procedure for it. Pls help ASAP Thanx & Rgds Pradeep Sharma

  • CT5508 for two networks

    Hello Following customer request/desire I am exploring a "strange" CT5508 config. Before diving in to it deeply I would like to know if my idea is possible at all. This is what I need to start from: 1. Network is divided in two pieces , let's say "LE

  • My iPhone 5 speaker is going out intermittently.

    My speaker seems to be going out intermittently. For example, this morning my phone was connected to my alarm clock and it odd not play music when my alarm went off. It was silent. After disconnecting it, I received a call but there was no ring or vi