Ff67 , How Interpretation algoritms 001 take VALUE and REFER

Dear experts
How to Interpretation algoritms 001 take VALUE AND REFERENCE (XBLNR).
BOTH VALUE AND REFERENCE .
When I use algorithm 001 without REFERENCE , It take value , but when I
put REFERENCE it take REFERENCE only and NO TAKE VALUE .
I need that this algorithm take both VALUE AND REFERENCE.
How Can do this ?
Our electronic account statement , have many equal values , but I can
take reference value for clear item open automatic . In this moment is
manual this process.
Is necesary implement user-exit or badi for this solution ? Or any ideas to implement algoritms 901 ??
Thanks for your comments

Hi phantom,
Row 1 is a Header Row. Row 10 is a Footer Row.
Formula in Footer Cell B10
=SUMIF(C,TRUE,B).
SUMIF will sum the values in B where there is a tick (TRUE) in C.
Regards,
Ian.

Similar Messages

How to get the kerning value and set it to back use script?

hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

How to Assign a default value and Increement in my Target table ........?

Hi,
In my target table I want to Increment a value and store it in the table ........
the increement shud start frm ...........5001,5002,5003..................etc
How can I achieve this...........?
I created an numeric Variable and in assigned the default as 5000 nad action as Historize.........
In the target Datastore ......I assigned VAR+1.......
but in the Target column I got 5001 for all the columns........
Which way is the best way to deal with the Variables.......
Thanks
AK
Message was edited by:
AK2008

Hi Gurusank and Micropole,
Thanks for reply and info.....
I am trying out one of the solutions first........
Gurusank,
I have created a sequence........whether I need to mention the schema and table name ,column.........also ( I gave all the information) and Increement column =1 and saved it .......
Then I follwed the procedure as u have mentioned .....
And in the Target field also I gave the same the same.......for tat column I gave choose (target for execution).
And I directly ran the interface ..........
I got the folowing Error:
287 : 42000 : java.sql.SQLException: ORA-02287: sequence number not allowed here
java.sql.SQLException: ORA-02287: sequence number not allowed here
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:534)
Could u plz let me know where I am doing the mistake
Thanks
AK

TS2446 I changed my password after the acct. being disabled. It is still not working. How long does it take? And how do I make it work again?

I changed my password after the acct. was disabled. We had to dispute some charges and got it worked out. The new password won't work and thats what we were told to do. How long does it take for the new password to take effect? And is there something else we should do?

Contact itunes support

How to maintain space between value and base unit of measure in sapscript

Hi Guys,
I am working on an upgradtion project, i have problem like while upgrading from 4.6b to 5.0. i need to main a space between value and base unit of measure. can anyone letme know how to maintain in the form. I mean in sapscript.
Thanks,
Yogesh

There are a couple of ways to handle this, if you need a bigger space between, you can use tabs in the paragraph format. Or you can just write the space in between the fields like so.
ZA &MSEG-MENGE& &MSEG-MEINS&
Regards,
RIch Heilman

How to Store bollean selection values and retrieve them in runtime?

I have an array of bolleans representing a channel of a device. Now , when the user turns on the channel the selected channel array are supposed to be stored. Now when the user selects device 2 (using a ring function) the list refreshes t5he channel names and resets the bollean array to their default values and the new selection values are to be stored. Now if the user wants, he should revert back to device 1 and can review what all channels he had selected for Device 1. How can this functionality be achieved?
Labview Learner
Attachments:
1.PNG ‏14 KB
2.PNG ‏14 KB

You need to store the boolean array somewhere. I would likely just use a shift register
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to get po delivered value and po invoived value?

HI experts,
i need to create bex query with PO total value, PO NET VALUE Item wise, po delivered value,
po still remaining value and po invoiced value.
AFter extensive search i got 0net_po_val for PO net value item wise.
Remaining 4. Fields am unable to search in bw targets. So how to proceed?? Any inputs?
Thanx in advance.
br,
Ravi kiran

Hi Ravi,
Please find the logic for the same:
PO Delivered Value
EKBE (BEWTP = E and SHKZG) SHKZG = S is positive and
SHKZG = H is negative.
PO Still Remaining Value
PO Value- PO Delivered Value
PO Invoiced Value
EKBE(BEWTP = Q and SHKZG) SHKZG = S is positive and
SHKZG = H is negative.

When we run query how it gets the characteristic values and attributes.

Hi,
When we load transaction data it chacks characteristic values then SIDs then DIM IDs then insert DIM IDs into fact table but when we run the query how it checks and gets the characteristic values and attributes.
Bye
GK

when we run the query how it checks and gets the characteristic values and attributes.
Just the opposite way you have described. It gets from the corresponding masterdata tables, with the connected SID.

ALV: How do I suppress repeating values and page breaks on printed output?

Good day, everyone!
First, I've done a LOT of searching trying to find the answer to my question, but I'm not finding an answer. If this has already been answered and you can point me to a URL, I would appreciate it.
Here's my issue: I have a rather simple ALV report. It has the columns of Person ID, Personnel Number, For Period, In Period, and Amount. I sort by Person ID and Personnel Number, and if the value repeats on the next line of the report, I want to suppress it (make it blank).
I thought the answer was in the following code, where I set the GROUP attribute to asterisk:
CLEAR sortcat_ln.
sortcat_ln-spos      = '1'.
sortcat_ln-fieldname = 'PERSONID_EXT'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
sortcat_ln-spos      = '2'.
sortcat_ln-fieldname = 'PERNR'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
It looks PERFECT on the screen -- the values are suppressed if they repeat, and everything appears together on one screen. However, when I print the report, two things happen: 1) The values repeat on each row, even if they are the same, and 2) I get a page break after each Person ID / Personnel Number combination.
I now realize that I can't use the GROUP attribute. Is there some other way in ALV to blank these repeating values and keep all the rows together on one page, rather than page breaking after each value change?
Thanks!
Dave

Hi
Same requirement i had before, when i try to print preview. the output of the grid display is in grouping is ok, but when i print preview or print it doesnt cater the grouping and page breaks, so what i did i modify the internal table use in alv , after hitting the print preview/print with the format desired by the user. you can do that in user-command. see code below
FORM user_command USING r_ucomm TYPE syucomm
                        rs_selfield TYPE slis_selfield.
DATA lt_sort TYPE lvc_t_sort.
CASE r_ucomm.
    WHEN '&RNT_PREV' OR '&RNT'.
      t_final_x[] = t_final[].
      PERFORM clear_redundant.
      PERFORM set_sort_criteria USING lt_sort.
    WHEN '&F03' OR '&PRINT_BACK_PREVIEW'.
      t_final[] = t_final_x[].
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
hope it helps

How to create a display value and a return value for an item

Hi! I have an item on a form. I want the default value for my item to be :":APP_USER", but the return value, to be the id of my user. I tried to create a PL/SQL Expression for the default item, but it doesn't work. What do I miss?
It should be something like this, but it's not.
begin
select first_name || ',' ||last_name as "Employee",
id_employee -- display value,return value
from employees
where id_employee = :APP_USER;
end;
Does anyone know?
Thanks!
Vitaly

Hi VItaly,
Display value and return value concept applies very well in case of a Combo box if i am correct, I don't know what type of item is your's.
But any way, you can have a workaround like,
Create a hidden item such that it's default value should be ID of the user which can be get from db by using :APP_USER.
Use the this item for your references.
I think this will meet your requirement.
Thanks
Kumaraswamy.

How to make External Reference number and Ref Date Mandatory in Complaints

Dear Experts,
Greetings!!!.
How to make External Reference number (EXT_REF_NUMBER ) and Ref Date ( EXT_REF_DATE ) Mandatory in Complaints.
Regards,
Sany

HI,
You can use Incompleteness Procedure to make those fields mandatory in complaint transaction.
Regards,
PP

How to show a field value and a message text in a message box

Hi
I have made a message box that shows the value of a text field when a button is clicked. I would like to add some message text to the message box as well, so that my message box will show something like:
You have entered this data: "textField value"
This script works to show the text field value but I cannot figure out how to combine it with an ordinary message box text message. I have tried various combinations of () and “ “ but no luck.
if
(TextField1.rawValue != null){
xfa.host.messageBox(TextField1.rawValue
, "Message box title");}
Kirstine

you can use below code:xfa.host.messageBox("Word you want to add in start "+TextField1.rawValue
+" Word you want to add in the end","Message Box Title")
Thanks

How to get selected item value and display text in selectOneChoice ?

Hi
Thank you for reading my post
I bind the a selectOneChoice component to my backing bean so i have an object which represent this component in the backing bean.
now i need to find which item is selected by use , i know that i can use
getSelect_service().getValue.toString() , but it will return the value of the selected item, how about its display text ?
I should say that i create an static list for selectOneChoice items.
thanks

Using JDeveloper 10.1.3.1, freshly downloaded off OTN. I used the following code to try and identify the problem you are encountering. I attempted to use a valueChangeListener in combination with af:selectOneChoice components that use SelectItems and the singular SelectItem. I could not reproduce the error in either case. Please post more information about your development environment.
          <af:selectOneChoice label="Label 1"
                              binding="#{backing_test.selectOneChoice1}"
                              id="selectOneChoice1"
                              valueChangeListener="#{backing_test.valueChangeListener}"
                              autoSubmit="true" immediate="true">
            <af:selectItem label="1" value="1"
                           binding="#{backing_test.selectItem1}"
                           id="selectItem1"/>
            <af:selectItem label="2" value="2"
                           binding="#{backing_test.selectItem2}"
                           id="selectItem2"/>
            <af:selectItem label="3" value="3"
                           binding="#{backing_test.selectItem3}"
                           id="selectItem3"/>
          </af:selectOneChoice>
          <af:selectOneChoice label="Label 2"
                              binding="#{backing_test.selectOneChoice2}"
                              id="selectOneChoice2"                              valueChangeListener="#{backing_test.valueChangeListener}"
                              autoSubmit="true" immediate="true">
            <f:selectItems value="#{backing_test.items}"
                           binding="#{backing_test.selectItems1}"
                           id="selectItems1"/>
          </af:selectOneChoice>
    public void valueChangeListener(ValueChangeEvent evt){
        // returns a UISelectOneChoice object
        System.out.println(evt.getSource().getClass().getName());
        // returns a string
        System.out.println(evt.getNewValue().getClass().getName());
    public Map getItems(){
        items = new HashMap();
        items.put("11","11");
        items.put("12","12");
        items.put("13","13");
        return items;
    }

How to check the maximum Value and Last value in Reports CP column

Hi all
First of all i am sory that iam posting this question in forms instead of Reports....i had posted it in reports but no one reply and i need uirgent solution so I post here....
My problem is that in Report I have calculated some values in CP column......Like
:CP_Total := :Frieght * Rate ...etc
Know i want to ask that how can I get the last value that will be return the by this column????and also the maximum value that it will return
Thanks in advance
Shayan
[email protected]

You mast build Summary column out of the query and select maximum to your maximum value of CP in Report level (or last for last value).

Ff67 , How Interpretation algoritms 001 take VALUE and REFER

Similar Messages

Maybe you are looking for