FG Material to Other FG Material

Hi,
How to use FG Material in other BOM of FG Material. Also tell me financial Accounting effect if we are useing Finished Goods for other Finished Goods.

Hi
I did not understand what you mean by
But i want to know how to check production of FG Material ie used as component
Do you want to check the production of MCB made during the month? If yes, you can check it in MB51 movement type 101
If you want to check the GL account of this MCB that will be used during production to receive the stock, the GL account lies in OBYC - BSX Key...
Regards
Ajay M

Similar Messages

  • Material Documents(Other than GR/GI)

    All,
    I am looking to get all material documents that got posted other than Goods Receipt and Goods issues. Can any one suggest me by seeing material doucment number header details(May be document type), Can we say document is not for Goods Receipt/Goods Issues.
    Other option is,scan movement types to filter document other than Goods Receipt/Goods issue. This is time consuming process.
    Any inputs will be appreciated to find a material documents other than GR/GI.
    Thanks.

    Hi
    You want to see all the material docs other than goods reciept and googs issue. You must be knowing the movement type for these two transactions.
    Go to MB51. Go to select options in movement type field. enter movement types for goods reciept and goods issue which you use in RED COLORED Single Vals TAB.
    Execute the window.
    Execute the transaction. You will get all the material docs other than GR and GI. You can enter more criteria like plant, sloc or material for which you want to see all the docs.
    For any concern let me know Or reward if it helps.:)
    Thanks
    Kapil

  • Free Goods from One Material Group to Another Material Group

    Salute Masters!! 
    I need your valuble suggestion, please provide.
    I need to configure Free Goods of Material Group to Material Group.
    User want:
    1) Free Goods from one Material Group to another Material Group, like F010 to F040
    2) User should have option to change from one Material Group to Other Material Group, which He / She want, like F010 or F020, F030, F040 any one of them.
    Suppose;
    Line Item Material Belongs to One Group Quantity in Gallons Free Goods from Any Material Group Quantity in Gallons
          1            A                                              3                                    F010                                             4
          2            B                                              3                                     F020
          3            C                                              4                                     F040
    Any No. of Line Item Any No. of Material
                                       from One Group      Total 10                   From Any Material Group
    (Comprising of 3-4 Different Material from 1 Group, they should be able to choose/provide Free Goods from other Material Group)
    3) While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
    How I can configure this scenario?
    Please suggest, is it  possible through KEY COMBINATION?
    Rgds.
    Srivastav
    +91 7829755109
    Skype ID: sanjai.srivastav1

    Hi,
    if you want to give free goods from other group it can be possible only for EXCLUSIVE free good type
    In exclusive free goods, a material different from the orignal material can be specified as the free goods.
    Example: A customer who buys 200 crates of beer, gets 5 boxes of glasses free.
    In VBN1 >> Exclusive
    See column ADD FREE MATERIAL
    While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
    Maintain alternative units in material master >> Additional data >> Material master,BUT it is only main item
    Those item u want to give free that items unit is derived from free goods condition record and it CANNOT be change in order

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • Can I use the fields Product allocation and Basic material for bifurcation of material

    Dear Users,
    We have a requirement for bifurcation of material so we need two field in material master for fulfilling the requirement. First requirement is material category like insurance or revenue etc., second requirement is department wise like electrical, maintenance etc, so i have choosen the fields 'Product allocation' in basic data 1 screen in material master for fulfilling department requirement and then in basic data 2 i have choosen 'Basic Material' field for fulfilling material category requirement. My doubt is whether this change will effect the reports and i need to know the effects of such changes.
    Thanks,
    Manoj

    As you are trying to use the standard fields, so you can read the F1 help for these fields.
    Also check in which table and program, the fields are used.
    Read the F1 help and find the table and program by using this document How to find Table name for a Field which is shown structure name on press F1.
    After reading this, If these fields are suitable for your requirement, then you can continue.
    Regards
    Dev

  • Reducing the Freight cost on material value for undelivered material

    Hi Experts,
    Summary :  The material supplier vendor needs to be paid for full quantity of material. The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% under tolerance then amount at 1.5 times the cost of material for the shortage is to be deducted from the transporter. A dummy GR will have to be prepared for the undelivered quantity for which we do not want the freight cost to be loaded. The details scenario is mentioned below :-
    We have to make a Purchase Order with material code say ABC for procured of some material. Suppose we make a Purchase Order for 100 nos. at a Unit Price of Say Rs. 10/- for Material Code ABC on say Vendor M/s XYZ. A freight condition is maintained in the Conditions Tab and suppose the Freight is Rs. 10 per unit of the material.
    While preparing the Goods Receipt through MIGO, in the Freight Tab we select say freight vendor say M/s PQR against the freight condition and post the goods receipt.
    While doing Invoice Processing in MIRO, when we enter the combination of Purchase Order and Planned Delivery Cost the system will populate the vendor codes of both the supplier of material and the transporter. On selecting the transporter the freight amount will populate against which the invoice of the tranporter can be processed.
    In the Vendor Master of M/s XYZ GR-Based Invoice Verification is activated.
    The vendor is allowed an under tolerance of 0.5% (i.e. the vendor should deliver at least 99.50 nos. of the Purchase Order). If the vendor delivers 99.50 or more then there will be no deduction in the freight charges.
    But suppose the vendor delivers only 99.4 nos. of the quantity. Then we will prepare the GRIR for 99.4 nos.only. But while processing the MIRO we need to deduct 1.5 times the value of the material from the freight amount for the shortshipped quantity, i.e.
    0.1     no (99.5 u2013 99.4) X Rs. 10/- * 1.5 = Rs. 1.5 are to be deducted from the final payment from the freight amount of the transporter.
    The material supplier will have to be paid in full 100 nos. of quantity and will raise an invoice for 100 nos. A dummy GRIR for the 0.6 nos. of undelivered material will have to be prepared for processing the invoice for the 100 nos. of the material supplier and a dummy issue for 0.6 nos. of undelivered material will be prepared to remove them from the system.
    Hence the freight cost for this 0.6 nos. of undelivered material will also go into the cost of the material and increase the MAP by that amount. Also the goods issue Cost will also have the effect of the freight cost.
    We do not want to load the freight cost for the undelivered material in the value of the material.
    Can any one please suggest a solution for the same.
    Thanks in advance.
    AJ.

    Hi
    A PO Will be raised for full quantity of material say 100 nos.
    The material supplier vendor needs to be paid for full quantity of material.
    A freight vendor is maintained at the time of GR for material against the freight condition maintained in the Po.
    The freight vendor facilitates the delivery of the material from the vendor to the purchaser for which he is given an under tolerance limit of 0.5%. Any delivery below this tolerance limit, freight amount to the effect of 1.5 times the per unit rate of material x short fall below 0.5% tolerance will be deducted from the freight amount.
    A dummy grir will have to be prepared for the short delivered quantity for processing the invoice for the full quantity of the purchase order, as the vendor is going to raise the invoice for full purchase order quantity. The client does not want to load the freight cost of the undelivered quantity on the material value as it will wrongly show the MAP of the material. This shortshipped material will be issued to remove it from the system and the stock will remain for the delivered quantity only. The vendor is subject to gr based invoice verification.
    Please suggest a solution.
    Thanks in advance.
    AJ
    The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% under tolerance then amount at 1.5 times the cost of material for the shortage is to be deducted from the transporter. A dummy GR will have to be prepared for the undelivered quantity for which we do not want the freight cost to be loaded.

  • Urgent:Material Type for Packaging Material in WM and MM

    Hi
    There is a place in SPRO where i can define the material type for packaging.
    Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
    How can i create a material using this material type? What is the use of material type here?
    Whenever i create material in MM01/MM41, i get the standard material type list.
    Thanks & REgards
    Kapil

    Hi,
    In T.code: OMS2, you can get standard material type list.VERP is the standard material type for packing material.You can copy VERP and rename to ur material type( as it is ur business requriement or else u can use same VERP)
    What is the use of material type here?
    With the help of ur Material Type , u can craete material like The material type,will be used while defining the material
    master.At that time,in Tcode:MM01,first screen we need to
    mention,(material type)it show the nature of material
    ex:-engineering product,finished products,semifinished
    product,etc.,
    It also play vital role on material numbering,material type in comination with plant & valuation class, play vital role in inventory & accoputning.
    To Create Material,use t. Code: MM01,
    Step-1
    Enter Material Code: ( example-Polythene Bag, If External Number Range or leave it blnak)
    Enter Industry Sector: ...................
    Enter Material Type: ..........................(VERP- Packing)
    Step-2
    Select
    Views you required( like eample:basic data-1, like basic data-2,purachsing, purchase order text,General plant data, accounting-1, accounting-2 etc)
    Step-3
    Enter Plant,
    Enter Storage location
    {{{Enter Sales organization & Distribution channel(if sales view selected)}}}
    Step-4
    You will have views like (example-1, basic data, enter Base unit of measure, material group and other details as required field,example-2,Accounting data, enter valuation class, price control; S or V & price)
    Step-5
    Save.
    Note: Before creation material you must know which Industry Sector, Material Type ur going to use and material numbering is internal or external.
    For more, check the following link for creation of material
    http://www.synactive.com/docu_e/doc_multi_mm01.html
    Regards,
    Biju K

  • Material Transfer From one Material Type to another should not be possible

    Dear Gurus ,
                        I have a issue here i want to lock the transfer posting from one Material Type to Another Material Type . The point is the Transefr Posting Shuold happen from same Material Type  . So can anybody help me out that what should I do for the same

    Hi ,
            I tried for the same but its not working . I just kept a Break point in this exit . Tried to transfer from MB1B its not stopping at the Break Point Can U suggest as I am doing it from MB1B .
    Regards
    Shankar

  • Copying one material attributes to another material thro' FM or BAPI

    Hi,
    My requirement is :
    To copy a material attributes from one material(old) to an another material(new). Can anybody suggest a FM or BAPI for this?
    Thanks,
    Kaarthick

    Hi,
    These answers never helped me. I can reformat my quesion : Pls. suggest a BAPI/RFC/FM used to create a new material with reference to an old material.
    Hope this is understandable one.
    Thanks,
    Kaarthick

  • No Material classification view in material master.

    Hello all,
    I have created LSMW for material master upload . Material is getting created through this, but 'classification view' is not getting created.
    But i can see the material- class assignment in CL20N.
    This problem is for specific material group.
    Is there any relation between material group & classification view?
    Plz advice how to resolve this?.
    Regards,
    Satpal Mujawar

    Hi,
    I found more information:
    Batch Input for CL20N is no longer supported.
    But you can continue to use batch input with the old transaction cl20.
    Please have a look at note 943559, point 2. It would be even better to
    use BAPI's instead. Please consult the notes 213120 and 373824 about the
    possibilities you've got.
    You can find information about the relevant Bapi's in transaction BAPI via:
    - Cross-Application Components
    - Classification
    - ObjectClassification
    Best Regards,
    Arminda Jack

  • IS-OIL: Exchange Third-party feedstock material for on-spec material

    Dear All,
    We are using SAP ERP ECC 6.0 + IS-Oil Downstream and we are trying to figure out how to record the following business flow in the system:
    1. A third-party partner send us feedstock/off-spec material to our oil depot for an exchange with on-spec material
    2. We give them on-spec material and charge fees based on the cost of processing the feedstock to on-spec material
    We are thinking to use Buy/Sell exchange type, but when we buy the material, then there will be tax charge and material will be GR as valuated material , which we are trying to avoid.
    Could we use Terminalling Agreement? GR the feedstock as non-valuated and then GI on-spec material (let's say Diesel) as non-valuated also (different material between GR and GI).. Or there is another way in SAP, regarding services to process third-party raw material to finished good material for Oil and Gas industry?
    We are really appreciate your help..
    Thank you,
    John Stallon

    Hi,
    Please search for the SAP building blocks for Third party sale with Shipping and Third party sale W/O shipping
    U can use FERT as material type only
    regards,
    sujit

  • Material ledger tick in material master

    hi
    i have created material master Number ABC.
    Make changes in material type and activated material ledger. Now ML tick is on all new material master being created its fine.
    Question is how I can activate the ML tick on material number ABC which created before activation of material ledger.
    regards

    Hi,
    no, It's not a big mistake and it can be solved quickly be SAP Support.
    But you can try the following workaround:
    1. You can change the material type of the material to a material type managed by value and quantity (txn MMAM).
    2. Afterwards, change the customizing of the material type in OMS2 (I assume you've done this already).
    3. Finally, you reset the material type again in txn MMAM.
    If this does not work or if too many materials are affected, there is no  other way than contacting SAP Support.
    BR,
    Antje

  • Material specific status in material master

    Hi,
    We have a material A. in the material master for A, in the basic data ,the "X plant mat status is Z4 which means material discontinued. In the sales org tab for the same material, the "dis chain specific status" is Z1 which also means material under discontinuation.
    But the issue is we are able to create and save sales order for material A.
    i would like to know what is the issue. the system should not allow to create sales order. Also where are these material specific status configured and where is the control to block the sales order based on these material status.
    regds

    the creation of sales order is not controlled with a material status, it is only controlled with customizing of sales status.
    The sales status can be defined in IMG > Logistics general > material master > setting for central fields > sales relevant data > define sales status.

  • Material ledger activation in material master

    A material has been extended in plant xxxx and due to some reason material ledger could not get activated in accouting 1 view of a material master. As of now there is no transaction has been made in plant xxxx for tis material. Pls guide how we can actaivte the material ledger in material master.
    Note : Material ledger is activated at plant level because for other material it is activated.

    Maintain the same through Transaction variant SHD0.
    Best Regards,
    Ankur

  • Fm to display material details based on material description

    Hi,
    Is there any bapi or fm to display material details based on material description
    Regards,

    Hi,
    Get the material number from material description from MAKT table and then use the FM BAPI_MATERIAL_GET_DETAIL.
    Regards,
    Nagaraj

Maybe you are looking for