Fglrx: module mismatch after last upgrade

Ok, I know what it means and I know that everything should work...but it doesn't 
After yesterday upgrade of xorg-server the ati-drivers conflict with the new version
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux kortirion 2.6.17-beyond #1 PREEMPT Sun Jul 30 13:09:32 CEST 2006 i686
Build Date: 09 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 11 12:12:22 2006
(==) Using config file: "/etc/X11/xorg.conf"
(EE) module ABI major version (0) doesn't match the server's version (1)
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I've done some researches and even using startx -- -ignoreABI doesn't help:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux kortirion 2.6.17-beyond #1 PREEMPT Sun Jul 30 13:09:32 CEST 2006 i686
Build Date: 09 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 11 12:15:57 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) module ABI major version (0) doesn't match the server's version (1)
[R200Setup] X version mismatch - detected X.org 7.1.1.0, required X.org 7.0.-1.8
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I've tried also the newest ati drivers ( 8.28.8 ) with no luck (and btw the current PKGBUILD doesn't work too, it complains about a already existing links to Makefile.lib.c; applying the patch ati-makefile-2.6.16.patch correct the problem).
The open source's ati drivers work, and I'm using them now. xorg.conf hasn't changed at all and, no, generating one new with aticonfig doesn't solve the problem.

I got it working now 
At first, compiling ati-fglrx-beyond with the Cerebral's pkgbuild they gave me this error:
make: Entering directory `/usr/src/linux-2.6.17-beyond'
ln: creating symbolic link `./Makefile.lib.c' to `../scripts/Makefile.lib.c': File exists
make[1]: *** [scripts/Makefile.lib.c] Error 1
make: *** [_module_/var/abs/local/ati-fglrx-beyond/src/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.17-beyond'
ok, let's remove that link then, I thought. But after having done that:
make: Entering directory `/usr/src/linux-2.6.17-beyond'
CC scripts/Makefile.lib.o
gcc: scripts/Makefile.lib.c: No such file or directory
gcc: no input files
make[1]: *** [scripts/Makefile.lib.o] Error 1
make: *** [_module_/var/abs/local/ati-fglrx-beyond/src/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.17-beyond'
That was weird  :?
After googling a bit, I've found an idea from the ubuntu forum where it says to run
make scripts/
from /usr/src/linux-$kernver/ ; after a little wait time to allow the compiling, I retried to make the driver compiling and this time they worked flawlessly 
No more module mismatch, I wonder why I didn't have that Makefile.lib.c in the kernel source directory....
Anyway, thanks for your help Cerebral

Similar Messages

  • [SOLVED] Unable to boot after last upgrade [HP Smart Array]

    Hello guys.
    After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
    While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
    No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
    Any help will be appreciated.
    Last edited by edke (2012-06-04 10:39:20)

    Thank you for your quick reply.
    DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
    Of course, no change.
    DSpider wrote:
    Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
    # mkinitcpio -p linux
    But the MODULES section needs to have something in there...
    Here's mine:
    MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
    You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
    https://wiki.archlinux.org/index.php/Mk … Using_RAID
    https://wiki.archlinux.org/index.php/So … ID_and_LVM
    HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
    When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

  • Startdict crashes after last upgrade

    Startdict crashes after last upgrade
    $ stardict
    XDXF data parsing plug-in loaded.
    HTML data parsing plug-in loaded.
    Dict.cn plug-in loaded.
    Man plug-in loaded.
    PowerWord data parsing plug-in loaded.
    WordNet data parsing plug-in loaded.
    Spelling plugin loaded.
    Wiki data parsing plug-in loaded.
    QQWry plug-in loaded.
    WordNet dict rendering plug-in loaded.
    bookname: slovnyk_en-pl, wordcount 15424
    bookname: slovnyk_pl-en, wordcount 20087
    bookname: StarDict dictionary, wordcount 9
    [warning] Binding '<Ctrl><Alt>x' failed! Already assigned.
    (Gdk) [critical] IA__gdk_window_set_cursor: assertion `GDK_IS_WINDOW (window)' failed
    ERROR:compositelookup.cpp:34:void CompositeLookup::send_net_dict_request(const std::string&, const std::string&): assertion failed: (NetDictRequests.end() == std::find(NetDictRequests.begin(), NetDictRequests.end(), request))

    Maybe (because of occurrences of NetDictRequests) it is caused by internet modules which you don't have to need. I use just my local dictionaries and my ~/.stardict/stardict.cfg looks like:
    [stardict-private]
    version=1.0
    [/apps/stardict/manage_dictionaries]
    dict_order_list=/usr/share/stardict/dic/quick_italian-english.ifo/usr/share/stardict/dic/encz.ifo/usr/share/stardict/dic/czen.ifo/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo
    dict_config_xml=<dictgroup name="Default Group"><querydict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></querydict><scandict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></scandict></dictgroup>
    dict_default_group=Default Group
    [/apps/stardict/preferences/dictionary]
    only_scan_while_modifier_key=true
    use_scan_hotkey=false
    enable_sound_event=false
    [/apps/stardict/preferences/network]
    enable_netdict=false
    [/apps/stardict/preferences/main_window]
    hide_on_startup=true
    search_website_list=
    window_width=680
    window_height=359
    hpaned_pos=114
    (Well, there are some strange symbols after ".ifo"s on "dict_order_list=" line, they couldn't be pasted.)
    Internet (mainly those Chinese) modules are really unusable for me, so the first thing I do when I install StarDict is I delete all occurrences of <virtualdict ... /> and <netdict ... /> in the configuration file. Maybe it will help you too if you keep just <localdict ... /> items.
    There's other thing that bothers me now with StarDict - RealPeopleTTS works fine with the version 3.0.1-3 but hesitates to with the up-to-date version 3.0.2-2.
    Last edited by nemamradfazole (2011-01-23 01:33:27)

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • [NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

    Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
    After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
    I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
    here is the log:
    [2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
    [2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
    [2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
    [2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
    [2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
    [2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
    [2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
    [2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
    [2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
    [2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
    [2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
    [2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
    [2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
    [2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
    [2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
    [2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
    [2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
    [2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
    [2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
    [2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
    [2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
    [2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
    [2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
    [2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
    [2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
    [2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
    [2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
    [2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
    [2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
    [2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
    [2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
    [2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
    [2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
    [2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
    [2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
    [2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
    [2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
    [2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
    [2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
    [2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
    [2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
    [2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
    [2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
    [2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
    [2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
    [2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
    [2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
    [2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
    [2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
    [2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
    [2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
    [2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
    [2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
    [2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
    i dunno what happened...
    plz, someone help me
    regards
    Last edited by saneone (2007-08-30 18:11:32)

    Bogart wrote:
    I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
    Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
    What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
    But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
    What does correct font / correct spacing mean ?
    IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
    BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
    Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

  • I tunes is missing after last upgrade help! Please

    After last upgrade I noticed ITunes App is not on iPad.  How do I get it back?  I tried to download it again but all I get is it comes loaded on iPad.  Can anyone help me.  Thank you

    Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

  • After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

    After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Dp lib version mismatch-After kernel upgrade

    Hi All,
    After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
    Full qualified hostname = XXXXXX.saipc.XXX.com
    ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c  681]
    LOCATION    SAP-Gateway on host XXXXXXX / sapgw01
    ERROR       dp lib version mismatch, please check installation
    TIME        Mon Oct 20 00:33:37 2008
    RELEASE     700
    COMPONENT   DP
    VERSION     241000
    RC          -9999
    MODULE      dpxxtool2.c
    LINE        688
    DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    COUNTER     1
    ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c  369]
    ***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c     14652]
    XXXXXXXXX:ts2adm 30% pg sapcpe.log
    ================ >>> main =======================
    INFO:    sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
    =================================================
    INFO:    Try to find file table sapcpeft (default:sapcpeft)
    INFO:    Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
    INFO:    not found any file table.
    =================================================
    Update Local Programs (dir-sync + file-path + ln)
    =================================================
    Starting at 2008/10/20 00:33:34
    ERROR:   can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
    Mon Oct 20 00:50:19 2008
    ERROR => gateway (pid 24413) died [dpxxdisp.c   16063]
    DpGwCheck: appc_adm.stat = 2
    DP_FATAL_ERROR => Gateway could not be started - I better exit now
    please help in solving this problem
    Thanks
    Giridhar
    Edited by: giridhar n on Oct 20, 2008 12:47 PM

    Hi,
    We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
    Error Log
    (XXXXXXXXX is the hostname)
    Dev_W1:
    XXXXXXXXX:ts2adm 9% more dev_w1.old
    trc file: "dev_w1", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      01
    M sid        TS2
    M systemid   370 (Solaris on SPARCV9 CPU)
    M relno      7000
    M patchlevel 0
    M patchno    162
    M intno      20050900
    M make:      single threaded, Unicode, 64 bit, optimized
    M pid        3867
    M
    M
    M Mon Oct 20 03:59:26 2008
    M  kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c   1281]
    M  ThInit: running on host XXXXXXXXX
    M  calling db_connect ...
    C  Oracle Client Version: '10.2.0.2.0'
    C
    C Mon Oct 20 03:59:27 2008
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPTS2's password
    C  Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x106eea0c0 0x106ef1b80 0x106f02318
    C  Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
    C  Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
    C  Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
    C  Got SAPTS2's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x106eea0c0 0x106ef1b80 0x106f02318
    C  Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
    C  Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20081020 035926 XXXXXXXXX
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
    .sar,.gif
    I
    I Mon Oct 20 03:59:30 2008
    I  MtxInit: 1 0 0
    M  SHM_PRES_BUF                 (addr: 0xffffffff64c00000, size: 20000768)
    M  SHM_ROLL_AREA                (addr: 0xfffffffe40000000, size: 268435456)
    M  SHM_PAGING_AREA              (addr: 0xfffffffe36000000, size: 134217728)
    M  SHM_ROLL_ADM                 (addr: 0xffffffff7597a000, size: 3715586)
    M  SHM_PAGING_ADM               (addr: 0xffffffff79a00000, size: 656416)
    M  ThCreateNoBuffer             allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
    M  ThCreateNoBuffer             index size: 3000 elems
    M  ThCreateVBAdm                allocated 12176 bytes (50 server) at 0xffffffff7a900000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 1 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)
    X  ES initialized.
    B  dbntab: NTAB buffers attached
    B  dbntab: Buffer FTAB(hash header)  (addr: 0xfffffffe2c092088, size: 576)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
    B  dbntab: Buffer FTAB(item array)   (addr: 0xfffffffe2c1553c0, size: 3195648)
    B  dbntab: Buffer FTAB(data area)    (addr: 0xfffffffe2c4616c0, size: 30740480)
    B  dbntab: Buffer IREC(hash header)  (addr: 0xfffffffe2e1b6088, size: 576)
    B  dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
    B  dbntab: Buffer IREC(item array)   (addr: 0xfffffffe2e2793c0, size: 798912)
    B  dbntab: Buffer IREC(data area)    (addr: 0xfffffffe2e33c480, size: 6148096)
    B  dbntab: Buffer STAB(hash header)  (addr: 0xfffffffe2e91c088, size: 576)
    B  dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
    B  dbntab: Buffer STAB(item array)   (addr: 0xfffffffe2e9df3c0, size: 798912)
    B  dbntab: Buffer STAB(data area)    (addr: 0xfffffffe2eaa2480, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 0xfffffffe2ed94088, size: 3072)
    B  dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
    B  dbntab: Buffer TTAB(item array)   (addr: 0xfffffffe2ee57d80, size: 1997280)
    B  dbntab: Buffer TTAB(data area)    (addr: 0xfffffffe2f03f760, size: 14580144)
    B  db_con_shm_ini:  WP_ID = 1, WP_CNT = 24, CON_ID = -1
    B  dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
    B  dbtbxbuf: Buffer TABL  (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
    B  dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
    B  dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
    B  dbexpbuf: Buffer ESM   (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
    B  dbexpbuf: Buffer CUA   (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
    B  dbexpbuf: Buffer OTR   (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
    B  dbcalbuf: Buffer CALE  (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
    I  *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c      2782]
    I  *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c      1359]
    I  *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c      855]
    M  *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c  5064]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c   10506]
    M
    M  Info for wp 1
    M
    M    pid = 3867
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    B  dbtbxbuf: Saving TBX statistics:
    B  dbtbxbuf: 0 object entries written.
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c   269]
    dev_icm:
    trc file: "dev_icm", trc level: 1, release: "700"
    sysno      01
    sid        TS2
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    177
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3865
    [Thr  1] started security log to file dev_icm_sec
    [Thr  1] ICM running on: XXXXXXXXX.saipc.XXX.com
    [Thr  1] MtxInit: 30001 0 2
    [Thr  1] IcmInit: listening to admin port: 64999
    [Thr  1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
    [Thr  1]
    [Thr  1] *  LOCATION    ICM runing on host XXXXXXXXX
    [Thr  1] *  ERROR       dp lib version mismatch, please check installation
    [Thr  1] *
    TIME        Mon Oct 20 03:59:28 2008
    [Thr  1] *  RELEASE     700
    [Thr  1] *  COMPONENT   DP
    [Thr  1] *  VERSION     241000
    [Thr  1] *  RC          -9999
    [Thr  1] *  MODULE      dpxxtool2_mt.c
    [Thr  1] *  LINE        688
    [Thr  1] *  DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    [Thr  1] *  COUNTER     3
    [Thr  1] *
    [Thr  1] *****************************************************************************
    [Thr  1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
    [Thr  1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
    [Thr  1] *** ICM shutdown completed (pid: 3865) ***
    dev_ms:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr  1] Mon Oct 20 03:59:24 2008
    [Thr  1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    145
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3853
    [Thr  1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
    [Thr  1] MsGetOwnIpAddr: my host addresses are :
    [Thr  1]   1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
    [Thr  1]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr  1]   3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
    [Thr  1]   4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
    [Thr  1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
    [Thr  1] HTTP logging is switch off
    [Thr  1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
    [Thr  1] ms/icf_info_server : deleted
    [Thr  1] *** I listen to port sapmsTS2 (3601) ***
    [Thr  1] *** I listen to internal port 3901 (3901) ***
    [Thr  1] CUSTOMER KEY: >C0395101982<
    [Thr  1] Mon Oct 20 04:01:28 2008
    [Thr  1] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
    [Thr  1] Mon Oct 20 04:05:07 2008
    [Thr  1] MsSExit: received SIGINT (2)
    [Thr  1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
    dev_rd:
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Oct 20 03:59:26 2008
    ***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c     1757]
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    176
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        3864
    gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
    gateway (version=700.2008.06.23)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Oct 20 03:59:27 2008
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
      2 : [127.0.0.1] localhost (LOCALHOST)
      3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
      4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
    Full qualified hostname = XXXXXXXXX.saipc.XXX.com
    ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c  681]
    LOCATION    SAP-Gateway on host XXXXXXXXX / sapgw01
    ERROR       dp lib version mismatch, please check installation
    TIME        Mon Oct 20 03:59:27 2008
    RELEASE     700
    COMPONENT   DP
    VERSION     241000
    RC          -9999
    MODULE      dpxxtool2.c
    LINE        688
    DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    COUNTER     1
    ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c  369]
    ***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c     14652]
    dev_rfc24:
    Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
    ======> User is locked. Please notify the person responsible
    ABAP Programm: SAPLTMSC (Transaction: )
    Called function module: TMS_CI_START_SERVICE
    User: DDIC (Client: 015)
    Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
    dev_disp
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      01
    sid        TS2
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    162
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        3854
    Mon Oct 20 03:59:25 2008
    kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c   1257]
            shared lib "dw_xml.so" version 162 successfully loaded
            shared lib "dw_xtc.so" version 162 successfully loaded
            shared lib "dw_stl.so" version 162 successfully loaded
            shared lib "dw_gui.so" version 162 successfully loaded
            shared lib "dw_mdm.so" version 162 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >XXXXXXXXX_TS2_01                         <
    DpShMCreate: sizeof(wp_adm)             42240   (1760)
    DpShMCreate: sizeof(tm_adm)             150350080       (30064)
    DpShMCreate: sizeof(wp_ca_adm)          31232   (104)
    DpShMCreate: sizeof(appc_ca_adm)        208000  (104)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)           548064  (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0       (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)           0       (72)
    DpShMCreate: sizeof(vmc_adm)            0       (2080)
    DpShMCreate: sizeof(wall_adm)           (1000056/862328/88/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY             (addr: 0xffffffff66000000, size: 153051096)
    DpShMCreate: allocated sys_adm at 0xffffffff66000000
    DpShMCreate: allocated wp_adm at 0xffffffff66002218
    DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
    DpShMCreate: allocated tm_adm at 0xffffffff6600c778
    DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
    DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
    DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
    DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0xffffffff6f02f488
    DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
    Mon Oct 20 03:59:26 2008
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <ES> Info: use normal pages (no huge table support available)
    EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
    EsStdInit: Extended Memory 4048 MB allocated
    <ES> 4047 blocks reserved for free list.
    ES initialized.
    Mon Oct 20 03:59:31 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1659]
    ***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c   12153]
    DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3866) exited with exit code 255
    my types changed after wp death/restart 0xbf --> 0xbd
    ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3867) exited with exit code 255
    ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3868) exited with exit code 255
    ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3870) exited with exit code 255
    ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3871) exited with exit code 255
    ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3872) exited with exit code 255
    ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3873) exited with exit code 255
    ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3874) exited with exit code 255
    ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3875) exited with exit code 255
    ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3885) exited with exit code 255
    ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3888) exited with exit code 255
    ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3890) exited with exit code 255
    ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3902) exited with exit code 255
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 162
    Release check o.K.
    Mon Oct 20 03:59:51 2008
    my types changed after wp death/restart 0xbd --> 0x81
    ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3903) exited with exit code 255
    ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3904) exited with exit code 255
    ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3905) exited with exit code 255
    ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3908) exited with exit code 255
    ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3911) exited with exit code 255
    ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3914) exited with exit code 255
    ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3915) exited with exit code 255
    ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3916) exited with exit code 255
    ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3919) exited with exit code 255
    ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3924) exited with exit code 255
    Mon Oct 20 04:00:11 2008
    ERROR => gateway (pid 3864) died [dpxxdisp.c   16063]
    DpGwCheck: appc_adm.stat = 2
    DP_FATAL_ERROR => Gateway could not be started - I better exit now
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    kill(3869,0) successful -> process alive
    killing W3-3869 (SIGUSR2)
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Oct 20 04:00:21 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)                        Mon Oct 20 08:00:21 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3866 Ended         no      3   0        0
    1 DIA     3867 Ended         no      3   0        0
    2 DIA     3868 Ended         no      3   0        0
    3 DIA     3869 Run           yes     0   0        0
    4 DIA     3870 Ended         no      3   0        0
    5 DIA     3871 Ended         no      3   0        0
    6 DIA     3872 Ended         no      3   0        0
    7 DIA     3873 Ended         no      3   0        0
    8 DIA     3874 Ended         no      3   0        0
    9 DIA     3875 Ended         no      3   0        0
    10 UPD     3885 Ended         no      3   0        0
    11 UPD     3888 Ended         no      3   0        0
    12 UPD     3890 Ended         no      3   0        0
    13 UPD     3902 Ended         no      3   0        0
    14 ENQ     3903 Ended         no      2   0        0
    15 BTC     3904 Ended         no      2   0        0
    16 BTC     3905 Ended         no      2   0        0
    17 BTC     3908 Ended         no      2   0        0
    18 BTC     3911 Ended         no      2   0        0
    19 BTC     3914 Ended         no      2   0        0
    20 BTC     3915 Ended         no      2   0        0
    21 SPO     3916 Ended         no      2   0        0
    22 UP2     3919 Ended         no      2   0        0
    23 UP2     3924 Ended         no      2   0        0
    Dispatcher Queue Statistics                     Mon Oct 20 08:00:21 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    4000
    0
    0
    --------++++--
    +
    DIA
    4
    4
    4000
    4
    0
    --------++++--
    +
    UPD
    0
    0
    4000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    4000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    4000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    4000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    4000
    0
    0
    --------++++--
    +
    max_rq_id               7
    wake_evt_udp_now        0
    wake events             total     3,  udp     2 ( 66%),  shm     1 ( 33%)
    since last update       total     3,  udp     2 ( 66%),  shm     1 ( 33%)
    Dump of tm_adm structure:                       Mon Oct 20 08:00:21 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks                   Mon Oct 20 08:00:21 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Oct 20 04:00:26 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >XXXXXXXXX_TS2_01                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    please help me to solve this.
    Thanks
    Giridhar

  • Displaying bash-3.2$ in terminal [NOT-SOLVED after last upgrade]

    hello, I have this same problem: http://bbs.archlinux.org/viewtopic.php?id=39192 but the "solution" posted there does not help me at all, I wish I could reuse the old thread but the 'SOLVED' keyword in the title may be confusing so I'm starting a new one.
    the problem is that the prompt of my terminals (konsole, yakuake, xterm) is PS1='\s-\v\$ ' in all users; this started to happen after the last upgrade when the profile mechanism was changed somehow, I have no PS1 in my .bashrc and the PS1 in profile.bash is PS1='[\u@\h:\w]\n\$ '.
    an interesting thing to know is that the virtual consoles (the ones accessed with Ctrl+Alt+F[1-6]) have the right prompt, and sourcing /etc/profile also fixes the problem on the others so I'm guessing that some other configuration file (possibly KDE or X related) is overwriting my prompt but I can't find it! fgrep -R 'PS1' /etc/profile* only shows the one I set not the wrong one.
    /etc/profile and /etc/profile.bash are being loaded since the other declarations are present as well when running `set` only PS1 has changed it's value.
    any help is appreciated.

    still searching, first of all some tests I've made with the help of the guys at #bash
    [11:33] <`Samus_> guys is it possible that starting X somehow erases my prompt?
    [11:33] <`Samus_> I know that's is not purely bash and maybe OS-specific sorry
    [11:33] <`Samus_> but it's geting me nuts
    [11:33] <{xmb}> cant find it
    [11:34] * Vadi ([email protected]) has joined #bash
    [11:34] * Vadi ([email protected]) has left #bash
    [11:34] <pgas> `Samus_: where do you define your prompt?
    [11:34] * albech ([email protected]) has joined #bash
    [11:35] * Agiofws has quit (Remote closed the connection)
    [11:35] <`Samus_> is bieng defined in /etc/profile (/etc/profile.bash really but it-s sourced from there) there-s no PS1 in .bashrc and the rest of the variables are set
    [11:35] <`Samus_> the most weird part is that in the virtual consoles (Ctrl+Alt+[1-6]) is ok
    [11:36] <{xmb}> smells likke a code fault
    [11:36] <`Samus_> but everything under X not
    [11:36] <pgas> what if you do bash --login in xterm?
    [11:36] * Oper_ ([email protected]) has joined #bash
    [11:36] <`Samus_> let's see
    [11:37] <`Samus_> bash --login shows it ok
    [11:37] <`Samus_> in fact resourcing /etc/profile fixes it too
    [11:38] <{xmb}> code fault something where
    [11:38] <pgas> ok, so one of the script starting X sets PS!
    [11:38] <pgas> you are on debian? have you checked /etc/bash.bashrc ?
    [11:38] <`Samus_> that's what I think but I can't find it
    [11:39] <`Samus_> no I'm on archlinux
    [11:39] <pgas> what if you type just "bash" in a terminal?
    [11:39] <`Samus_> and it might be some mistake because it started to happen after the last upgrade
    [11:39] * floyd_n_milan ([email protected]) has joined #bash
    [11:39] * hark ([email protected]) has joined #bash
    [11:40] <`Samus_> 'bash' shows the wrong prompt, 'bash --login' the right one
    [11:40] <pgas> in a terminal with the correct PS1 that is
    [11:40] * osfulgore ([email protected]) has joined #bash
    [11:40] <`Samus_> oh, in a terminal with the right prompt it stays ok
    [11:40] * `Samus_ fells kinda lost...
    [11:41] <pgas> ok, so the problem seems to be in one of the script used to start X
    [11:42] * prince_jammys has quit ("Konversation terminated!")
    [11:42] * Oper_ has quit ("Íå çíàåòå Äàíèëà Áåðåíöåâà? Îí ñêîðî âñòðåòèòñÿ âàì! Íå ñëûøàëè òàêîãî àâòîðà? Äîñòàíüòå ïðÿìî çàâòðà!!!")
    [11:42] * Oper_ ([email protected]) has joined #bash
    [11:42] <`Samus_> grepping 'PS1' in /etc/X11 didn't showed anything
    [11:42] <`Samus_> some clue of what should I look for (or where)?
    [11:43] <pgas> startx? ask #archlinux?
    [11:43] <`Samus_> going...
    I've also tried different WMs (KDE, xmonad) and they have this same problem but then, "fgrep 'PS1' /usr/bin/startx" and "fgrep -R 'PS1' /etc/X11/" showed nothing!! now what?
    truly wtf...

  • My 4s seems different after last upgrade

    should my 4s be any different after this last upgrade. My calander sound will go off but when I open it the sound will not shut off. My autofill is not always working

    Do the basic troubleshooting steps described in the User Guide, Appendix B:
    Restart, Reset, Restore

  • After last upgrade my itunes album covers dont match the songs.  any ideas why?

    after last system upgrade, the album covers do not match the music.  I called apple, they walked me thru something that did NOT work.  I delete the music, then readd...get the song with dotted circle....what does this mean??  The info is correct in my itunes under get info and then album art work.....

    Did you select the playlists to sync in itunes under the music tab?

  • Keyboard Shortcuts missing after last upgrade

    Almost half of the System > Preferences > Keyboard Shortcuts are not showing up as <Unknown Action> after the last upgrade.  I noticed this because my shortcut for terminal no longer worked.  I also had a problem with how the last upgrade changed my /usr/share/applications/compiz.desktop file...  However, even reverting to the original compiz.desktop file I had built, this issue isn't resolved.

    Looks like you now how to open up compiz-settings and turn on gnome-compatibility plugin
    That would resolve.
    If not you can use "commands" to set any command you like...
    [Edit] You are using compiz, right?
    Last edited by toffyrn (2009-02-27 14:32:09)

  • My iphone 4s will not play music on dock or car adaptor, but will charge.  It seems to have started after last upgrade.

    My iphone will not play music on dock or car adaptor, but will charge. It seems to have started after the last upgrade.

    Slight water damage on electronic equipment is like being slightly pregnant
    It either is or it isn't and your iPhone is water damaged
    Since you that turned it on prior to drying it the damage is done now
    Take to Apple and pay for a replacement
    Allan

  • [SOLVED] ((none)) login/tty and no keyboard after last upgrade?

    Hi,
    I dual boot and it's been a while since I last upgraded. I booted into Arch, updated everything, and used the system for a few days before rebooting (perhaps a bad call). I just rebooted today and my login prompt is like this:
    ((none)) tty1
    (none) login:
    But my keyboard does nothing. No alt+f* to get to a different terminal, no nothing. I have to hard kill the machine. I've tried twice but would prefer not to do that more than I have to. The second time, fsck didn't work so I booted into the Arch install disk and ran it manually. I tried to chroot into my Arch install and re-run pacman -Syu but got transient server failures. Not sure what all needs to be in place to try and do that, though.
    Has anyone encountered anything like this before? I get the same behavior with arch and arch fallback. I boot to login prompt, not directly to X so it's not anything to do with that, at least not that I would figure.
    So far, the only thing I've been able to find is from 2007 (LINK) but it seemed related to X. I'm going to check rc.conf next time I boot up but wanted to see if there's any other suggestions from someone more experience before I boot up again and potentially have to hard kill.
    Thanks for any thoughts/suggestions.
    Last edited by jwhendy (2010-10-26 02:53:26)

    @Knute: indeed.
    Somewhat embarrassingly, I just found out about manually maintaining *.pacnew files today when researching an unrelated issue. It made me wonder if that was my problem. Perhaps something is goofed in /etc which would explain a ton.
    I'm in OS X right now but will reboot shortly and try to fix this issue.
    The keyboard issue is troubling as well, though. Some have reported no logins, but often it's a PAM or login manager issue trying to go into X directly. I'm doing no such thing and literally can't get *anything* to work on my keyboard. That makes me wonder...
    If I were to boot into the Arch CD and try to run pacman manually... what do I have to do other than
    # mount /dev/sda3 /mnt
    # chroot /mnt
    I tried that yesterday but failed. I'm wondering if I have to mount some other items for that to work. /proc?

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Validating Digital Signatures using javascript

    i have created a sign field and a button. if user doesnt fill the sign and presses the button,the a error msg should appear. i have written the following java script for tat.kinldy help.its not working. if (event.target.getField("data.page.SignatureF

  • On iMessage, if someone sends me a photo I can't see it? How can I see them?

    If someone sends me a photo on iMessage I can't see it, and it sometimes comes up with "message delivery" or something similar to that. How can I see these photos?

  • Problem when executing the same subVI in parallel.

    Hey! I have created a subVI that I am using in two applications that executes in parallel. For some reason the applications is using the same instance of the subVI, which creates conflicts when the applications are trying to use the same subVI at the

  • Making a IDoc fail in a user Exit

    Hi all, I have a user exit in which status record is not coming in. But there is one table DOBJECT like NAST is flowing inside the exit. I have to make the IDoc fail , can u suggest whether i have to change the VSTAT field to 0 or 2. Whether this wil

  • Smartforms: Printing Selective Pages

    My smartform have 5 pages. My aim is print selective pages (ie page 1-3). In the global definition -> initialization, i wrote the statement below:   OUTPUT_OPTIONS-TDPAGESLCT = '1-3'. My problem is all 5 pages are still being printed out instead of p