FI-AA Reconciliation after loading revalued assets

hi
i am vamhsi
i have creat
I have created a asset in development server as01, me21n, me51n, aw01n, afab.
In that Assets have opening balances in Clint place so we r using FS00 to upload the balances in production serves. In this stage I have delete the Reconciliation that asset
Now I want to add the reconciliation on that asset How its do kindly say the answer
vamhsi

Have a search on this forum with OASV or ABF1 and you found the solution

Similar Messages

How to Load Revalued Assets in FA at the time of Data Conversion

Dear Experts,
How to Load Revalued Assets in FA at the time of Data Conversion?? Please help me
Thanks & Regards
Laxman

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

Calculation of Depreciation on Net Book Value after posting Revaluation on

How to calculate the depreciation on Net book value after posting Balance sheet revaluation ABAW? The depreciation is been calculated on APC and not on NBV, as the APC of asset has been revalued after the revalution posting, ideally the next period depreciation should be calculating on the new NBV, but the system is not doing this. Is there any specific configuration that Iam missing here.
Kindly Reply.
Jyoti

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials - Asset Accounting|SAP ERP Financials - Asset Accounting; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Depreciation of revalued asset

Hi Everybody,
I am here to seek your advice regarding an issue in asset accounting.
Let me delve into the problem directly.
Very recently my client has undergone asset revaluation process.After revaluation my client wants that the depreciation should be calculated as revalued value/total life. As per SAP its found that depreciation is calculated as revalued amount/remaining life.
Now my question: is it possible to calculate depreciation of revalued asset by taking the total life of the asset taking into consideration?
If yes then how? whats the process in SAP ?
Let me give an example:
Suppose in year 2006 an asset ABCD with an acquisition value of Rs 1000, total useful life is 10 years. So depreciation is Rs 100 for the year.So my Net book value is Rs 900 in year 2007.In 2007 itself the client made a revaluation of Rs 500 and the total value of the asset comes Rs 1500.
SAP is calculating the depreciation as (900+500)/9=155(approx) for a year.
Now my client wants to calculate the depreciation as (1000+500)/10=150.
Is it possible in SAP ? If yes then how to post the difference amount of (Rs 5 per year) in SAP?
Awaiting your early response.

Hi Dominic,
Thanks for your response.
If a new depreciation key is required, can the original multi level method be assigned, or would a new multi-level method need to be defined with the new appropriate depreciation rates?
Thanks
George

Trouble loading jpg assets

I'm trying to load jpeg assets into encore. After I load 6 the 7th one comes in blank. I don't understand. I'm running a windows XP platform and encore CS4 version 4.0.1.048. Second issue is I profile my monitor. When I pull up a jpeg ( converted from a TIFF file ) in bridge or photoshop is coloration is OK. When I put the same singular file as an asset in encore the coloration is quite a bit different. What I'm attempting to do is create a simple DVD.
Would appreciate help.

Welcome to the forum.
What is the pixel x pixel size of these JPEG's? They should be Scaled to the Project Frame Size in PS first. This ARTICLE will give you some tips.
Now, Encore is not a Color Managed Space, as video is not color managed. It is most likely that your color management, when by-passed for video display is not that close to the native. PS, AI, InDesign, etc., are all Color Managed. This trips up a lot of users, when they go to video.
Good luck,
Hunt

Can´t view photos in full screen after loading photos to dropbox? what to do?, can´t view photos in full screen after loading photos to dropbox? what to do?

after loading photos to dropbox i can´t view them in full screen in iphoto ... i can only view them small ... when i click on them this sign "!" appears... do you know how to fix this????

If you're loading photos to drop box why do you expect to see them in iPhoto?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

SkillBuilders Modal Page... closes immediately after loading

I would like to use the Modal Page plug-in from http://www.skillbuilders.com .*
I installed the two sample applications from their web site with different results:
The employee example works fine.
The example with the modal feedback worked fine yesterday, but today it shrinks (after loading normally) so that I can't see anything but the bar with the window name and the close button.
In my own application it's even worse:
I have links in a table which should open a modal window on click.
I tried several settings, but the only thing that's happening is that the window closes immediately after loading and showing the page for a half a second (or not at all).
Leaving the "Auto-close On Element Selector" empty did not work. The default value "div#success-message" kept coming back until I replaced it with "null". But still no effect.
Does anyone have any idea what could cause this behaviour?
Best regards,
Sabine
The Security Settings for all three applications:
Cache: Enabled
Embed in Frames: Allow

In the meantime I had the problem that the window didn't close at all, but I think I figured it out.
So if the Modal Plug In does not work properly, check the following:
<li>Does every process that should close the window have a 'Success Message' defined?
<li>In the unconditional branch, is "include process success message" checked?
<li>In the dynamic action, is "Auto-close On Element Selector" set to "div.t1success" in the true action?
BTW: The "shrinking problem" described in the first post still exists - in IE. In Firefox, it works fine.
Best regards,
Sabine

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though

All of my iMovie projects disappeared after loading Mavericks. The updated version of iMovie shows no files and cannot find any files to Import. My machine, a beefed up Mac Mini, has slowed to a crawl. Suggestions?

My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name:          Mac mini
Model Identifier:          Macmini4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MM41.0042.B03
SMC Version (system):          1.65f2
Serial Number (system):          C07DV15PDD6L
Hardware UUID:          132F7FB8-1556-55D3-BF33-C1A5EFC69D12

My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name:          Mac mini
Model Identifier:          Macmini4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MM41.0042.B03
SMC Version (system):          1.65f2
Serial Number (system):          C07DV15PDD6L
Hardware UUID:          132F7FB8-1556-55D3-BF33-C1A5EFC69D12

After load test is completed, "90% Page Time", "95% Page Time" columns appear blank and "99% Page Time" column is not available.

Hi,
I am using visual studio 2013. After running a load test on my application, I need to view the "90% Page Time", "95% Page Time" and "99% Page Time" percentile data in tabular results view. But since I have started
using visual studio 2013, these columns appear blank after load test execution is completed. Is there a specific configuration change is required to view data from these columns ?
Please refer attached screen shot -
Help much appreciated.
Thanks,
Rahul S.

Hi Rahul S,
To collect the data, in the Load Test Editor, under the Run Settings node, select the run setting node to change. In the
Properties window, for the Timing Details Storage property, select
All Individual Details.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount

I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?

In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
How to export contacts from Outlook for Windows.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

After loading OSX 10.9.2, my Canon printer is no longer found when trying to print from my MacBook Pro.

After loading OSX 10.9.2, my printer is no longer recognized by my Mac. I have a Canon MG 7120 and it is connected wirelessly.

Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
if that doesn't work there are a few options
look on the printer manufacturer's website for an updated driver
see if Gutenprint for Mac OS X has a driver
see if your printer will work with AirPrint or a generic driver. See: OS X Mountain Lion: If the software for your printer can’t be found (the reference says Mountain Lion but it still applies for Mavericks.)
go back to Mountain Lion
get a new printer

Cannot print to Brother HL-2270DW after loading mavericks

Cannot print to Brother HL-2270DW after loading mavericks

I got the 9840 working. I installed all the latest drivers (still no joy) but then I went into the Preferences, uninstalled the printer by simply highlighting the printer and selecting . I then closed the prefs, went back in and added it back . **** if it worked in Word immediately.
I agree with most - this has been a very unApple-like experience - hopefully not a harbinger of things to come.

FI-AA Reconciliation after loading revalued assets

Similar Messages

Maybe you are looking for