FI-AP - (Automatic Payment Program - Vendors) - Cheque Re-Assignment

Hi Experts,
Can some help me on a real-time issue on FI-AP Accounts Payables - Vendors - Automatic Payment Program - Cheque Re-Assignment Problem - which I am facing.
I have assigned a wrong cheque No. to a payment document through automatic payment program. Actually, this Cheque No. should be assigned to some other payment document.
How, can I release / set free this cheque no. and re-assign it to some other payment document.
I will awards points with an open heart.
Thanks & Regards
Rajeev Sharma

HI,
As u r use the automatic payment program - and when u use the automatic payment program the check number are assign in automaticly.
So this are assign when u do the check printing. So once u think the wrong number are printed , u have to void the check number and write manual check and assign to the line item.
FCHE - Voided Checks
FCH5 - Manual Checks : Write manual check
hope this is clear Assign some points.
With regards
Krishna Singareddy

Similar Messages

Automatic Payment Program / Vendor Master Bank Details

Hi All,
in Vendor Master we have bank details section.for the vendor to be picked in APP, There the bank should be maintained, which is maintained in FBZP. Please correct me if I am wrong.
Does the Payment Method have any role to play here?I mean if the payment method is Q(cheques) , is it not needed to maintain the bank details in Vendor Master?
Regards
Rudra

Hi Rudra,
your Question:-
in Vendor Master we have bank details section.for the vendor to be picked in APP, There the bank should be maintained, which is maintained in FBZP. Please correct me if I am wrong.
In FBZP, we maintain the Bank Accounts which we own and in vendor master we enter the Bank Account No.'s held by the vendors with their banks and this has got nothing to do with House banks that we maintain in FBZP. In some of the cases, the bank key may play a common role.. but this also depends upon bank key, its usage, design etc..
Does the Payment Method have any role to play here?I mean if the payment method is Q(cheques) , is it not needed to maintain the bank details in Vendor Master?
In FBZP, go to Pmt methods in a country.. There you will find a section which says, "Required Master Record Specifications". In configuration, you define for a Payment method, what the system should check, so if you have specified against a Pmt Method, that Bank Details>Account Number Required is a mandatory field, then system will check otherwise not. Usually, in case of Checks, we do not tick this as Vendor Bank Account No. has no relevance in case of check payment.
Regards,
SAPFICO

F110 - Automatic payment Program Vendor /Customer Clearing

I have entered all the settings related to the Vendor/Customer clearing.
1.Entering the Vendor and Customer account numbers in the relevant master records.
2.Activating the clearing with Vendor/Customer in both master records.
But when F110 is executed,the customer line items are thrown in the exception list.The line items are all due on both the sides.When i reallocate the customer line item,it is giving the option of deducting it from the Vendor line item.
It has to do autmotically and pay the balance amount to the Vendor,instead of doing it manually.
Request to contribute your ideas for solving this issue.
Regards
Sunil

Hii Neeraj,
The error says it consists of the debit balance.But the settings are already made in both the vendor and customer records.But if we click the execption item and reallocate ,it is accepted to deduct it from the vendor line item.
Thanks and Regards
Sunil

While Running Automatic payment program can't post any of the vendor docume

Hi Team,
I am Running the Automatic payment program in (F110) by assigning all of my company vendors (Ex. 0 to 9999) Normally i will take 10 to 20 hours time to complete the proposal.
In time of APP running when i am trying to post the any of the vendor document it is not allowing to post and getting the error as " Account .......... is blocked by the payment run"
Please give me the solution.
How can we post any of the the vendor documents when the APP is running.
If the APP runs 20 to 30 hours means we can not stop the vendor transactions.
Thanks in Advance
Vasavi

Hi Vasavi,
I understood your question.
What Iam asking is you to run the APP in background. SAP gives you a option to run the APP in background using T.code F110S.
If you have multiple company codes and multiple vendors you can break the APP into several runs so that system will not take much longer time.
The solution given by me will reduce the time taken for APP but it cant resolve the blocking issue. Once your APP runs with in 12 hrs (May be you can schedule a job in night), this may not interrupt the regular business like posting of Invoices in F-43 etc.
Thanks
Aravind

Clear Down payment against Vendor Invoice through Automatic Payment Program

Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
Sreenivasulu

Hi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas

Payment not clearing for Vendor through Automatic Payment Program

Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
Shalini

I have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM

Net off vendor payment in Automatic payment program

Dear Experts,
A vendor is also a customer. I have vendor payment of Rs. 1000/- and customer receivable for the same is Rs.800/-. Now the payment to vendor is only Rs.200/-. I want payment of 200 is made and payment advice and check are generated for Rs.200/- only. Is this possible in Automatic payment program? If "yes" what are the settings to be done to acheive this?
Regards
Komal

Hi,
You would need to maintain vendor code in customer master and vice versa.
After assigning the customer code in the vendor master, go to "Payment transactions Accounting".
Here you will find - Clrg with cust.
Select the check box next to it.
Then, run APP selecting both vendor and customer accounts.
System would do the necessary postings for the open items.
Caio
Raghu

Automatic Payment Program Proposal split same vendor invoices

Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
Satya

Hello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala

Vendor Tolerance Group in automatic payment program F110

Hi Experts,
We use automatic payment program F110 for payment to vendors. We want to define different tolerance group having different grace days to vendors.
e.g. Vendor 1 having tolerance group with 5 days as grace period
Vendor 2 having tolerance group with 10 days as grace period
Is it possible to have different grace days for making payment through F110. We donot want to make manual payment.
Thanks & Regards.

Hi,
Please refer this link:
F110 Payment run Problem
Regards,
Pramitha.

Automatic Payment Program-which of the bank accounts is chosen for payment

Hi Gurus,
I have a question related to Automatic Payment Program(F110). When Automatic Payment Program is run which bank account is chosen?
Is it the
1. Main Acount
2. Payment Sub account?
Also, why?
Kindly answer.
Regards,
Sagar

Hi Sagar,
In F110, the Payment Sub Account is selected for Payment(The Outgoing Bank Account). This is defined in FBZP in the node bank determination> Bank Selection> Bank Accounts.
The reason why this GL is selected is :-
1. When you make Payment: -
Vendor A/C...Dr.
To Outgoing Bank Account
2. Bank Reconciliation
Outgoing Bank Account Dr.
To main bank Account
The entry to the main bank Account is posted only when the information that the cheque is encashed by the vendor is sent by Bank in Bank Statement. The Main bank Account is the balance as per Bank Books. So, till the time, we do not receive info from bank that the cheque is encashed, the amount lies in Outgoing bank Account and it is transferred to main bank account only upon final confirmation from bank.
Regards,
SAPFICO

Automatic payment program setting

Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?

Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

Automatic payment program process

Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..

Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued....

Automatic payment program configuration process

Dear All,
My client is useing Automatic payment program with pyment methode "cheque" in 4.6c version. Now my client wants to go for other payment methodes... i.e,.....
1. NEFT payments - online Transfer to vendor account
2. RTGS payment Methode
3. Book Transfer.
can anybody let me know the configuration process of the above methodes. Early replies with configuration process are highly appreciated.
Thanks & Regards,
swathi

Hi
Output format and required fields of file format have already taken from bank. But SAP configuration point of view i need help.
Thanks & Regards,
Swathi
Edited by: swathi fico on Sep 21, 2009 2:44 PM
Inputs from anybody please
Edited by: swathi fico on Sep 22, 2009 3:57 PM

Automatic Payment Program Master Data Validations

Hi,
We´re configuring a new payment method for our company code (payment method T - bank transfer). We are using program RFFOM100 to generate the file that has to be sent to the bank. We had to enhance this program because the format of the file that our bank uses differs from MT100.
Now, the automatic payment program validates certain data before it allows an automatic payment to be posted, in particular it checks vendor master records to see if it has the necessary information to fill the MT100 format. Our bank's format doesn't require the same information that the MT100 format requires.
¿How can I stop the automatic payment program from checking for certain information in the vendor master data?
Hope you can help
- Julio

Hi Rudra,
your Question:-
in Vendor Master we have bank details section.for the vendor to be picked in APP, There the bank should be maintained, which is maintained in FBZP. Please correct me if I am wrong.
In FBZP, we maintain the Bank Accounts which we own and in vendor master we enter the Bank Account No.'s held by the vendors with their banks and this has got nothing to do with House banks that we maintain in FBZP. In some of the cases, the bank key may play a common role.. but this also depends upon bank key, its usage, design etc..
Does the Payment Method have any role to play here?I mean if the payment method is Q(cheques) , is it not needed to maintain the bank details in Vendor Master?
In FBZP, go to Pmt methods in a country.. There you will find a section which says, "Required Master Record Specifications". In configuration, you define for a Payment method, what the system should check, so if you have specified against a Pmt Method, that Bank Details>Account Number Required is a mandatory field, then system will check otherwise not. Usually, in case of Checks, we do not tick this as Vendor Bank Account No. has no relevance in case of check payment.
Regards,
SAPFICO

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

FI-AP - (Automatic Payment Program - Vendors) - Cheque Re-Assignment

Similar Messages

Maybe you are looking for