FI AR C02 - Data exists but Queries show no data

Hi all,
The FI AR cube C02 has data but the queries show "no applicable data". Is there a way to debug the query and see what it is trying to pull?  I tried using RSRT with execute + debug option but I couldn't figure out much.. Is there any other way to debug or is there a better way to use RSRT trans for my problem.
Thanks a lot!
Regards,
Ritu

I see that the right data for the Query is not there.. eg: for DSO analysis query, there is no sales data in the previous period for calculations based on the fiscal year period I give in the selection.. So I'm concluding for now that there is no proper data.. I shall ask the FI guys to create some data in R/3 for my testing.. am not sure when that'll happen ;>
Thanks for your help..

Similar Messages

  • Deleted bridge cc. Now I need to reinstall but it shows up in my creative cloud app as up to date without the option to download. How do I access it to download and reinstall?

    In an effort to correct an issue with my creative cloud, I deleted bridge cc. Now I need to reinstall but it shows up in my creative cloud app as up to date without the option to download. How do I access it to download and reinstall?

    Bmullinax please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to reinstall Bridge CC.

  • Data source was activated and replicated but not showing up in RSA7.

    Hello,
    Data source was activated and replicated but not showing up in RSA7.  At what point does the data source appear in the Delta Queue?
    Thanks

    Hi,
    for LO,LIS,generic,FI data sources, delta records come from delta queue.
    if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
    when the init request goes to R/3 then it will maintains delta queue in RSA7.
    assign points if it helps,
    thanks,
    pavan.

  • Hi, i have inserted a dvd in the drive, which has data in it but its showing blank and asking toburn

    Hi, i have inserted a dvd in the drive, which has data in it but its showing blank and asking to burn. Along with that its also showing the capacity of the dvd. Its ready to write the disk but not exploring the data on the disk. Please help..

    See if this fixit tool can repair it
    http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  • I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    Just in case (even though your symptoms aren't explicitly mentioned in the document), let's check to see if there's a LSP problem in play here:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

    put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • Restore from time machine does not list all my backups.  I know they exist but there dates are not present on the restore list.  Any help appreciated.

    Restore from time machine does not list all my backups.  I know they exist but their dates are not present on the restore list.  Any help appreciated.  If I must use one of these older dates to restore, how do I then get the more current data off time machine?

    Ok, so am i correct in saying that the steps to fix are as follows.
    That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
    is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
    It should, but sometimes people report that it fails. I'm not sure why that happens.

  • Domaindnszones Forestdnszones exists but does not show in Dns

    Guys I have a weird situation where the Domaindnszones and Forestdnszones partitions exists but does not show in dns.
    If I try to recreated the partition in DNS it says "partition already exists".
    I try Recreating it in DNS by creating a new domain under the "mydomain" zone but it never gets populated.
    Replication seems to be working fine between my DC's
    This domain was created from way back in the NT days and has just been upgraded over the years..
    currently we have 1 2003 Dc and 2 2008 r2 Dc. we want to retire the 2003 dc. all 3 dc are DNS, and GC servers.
    at this point should i even worry about this two partitions. ( Domaindnszones, Forestdnszones).
    I think Dns was never configure correctly when we went from 2000 to 2003
    thanks

    HI.
    Correction. the 2003 dns and dc is no loger in the environment. It was the Primary FSMO role holder.looks like all the roles has been transfer over to the new 2008 r2 dc. 
    I did not set this domain up. but are trying to clean it up.
    I notice in dns there was only one AD integrated zone (mydomain). that the (Domaindnszones and forestdnszones) are not visible. I tested replication between the DC via sites and services and replication is ok.
    I created and AD integrated Zone in DNS called _msdcs.mydomain and it looks like it populated it with all the corrected corresponginng zones.
      _mcdcs.mydomain
    ----------dc
    ----------domain
    -----------gc
    -----------pdc
    when i try in dns to Create default application directory partition, it tells me the "partition exists"
    using adsiedit connecting to DC=domaindnszones. dc=mydomain I can see the partition same is true for Dc=forstdnszones, dc=mydomain
    so digging around i found this similiar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b5551ad5-65ec-48f7-81b2-2a00bbd93def/msdcs-doesnt-exist?forum=winserverNIS&prof=required
    I followed solution suggested by ACE. which did allow me to delete and create the new (domaindnszones and forestdnszones) partitions. but sitll not showing in dns.
    some more research showed this link..
    http://blogs.technet.com/b/the_9z_by_chris_davis/archive/2011/12/20/forestdnszones-or-domaindnszones-fsmo-says-the-role-owner-attribute-could-not-be-read.aspx
    and indeed the script did clean up the deleted 2003 Dc/dns server. and assigned the new 2008 r2 dc/dns server
    still the Domaindnszones and Forestdnszones are not visible.
    Manually Creating a delegation under Mydomain (domaindnszones forestdnszones) only yield Grayed out folders
    Manually Creating 2 domains under Mydomain (domaindnszones forestdnszones) shows the folders. but once I restart netlogon and restart dns
    the folders disappear...
    any suggestion solutions will be greatly appreciated...

  • Data is in the repository, but not showing on the EPM workspace

    Hi All,
    Recently we have migrated from Hyperion8.5 to Hyperion11.1.1. Migration went on well no errors, after migration I see some folders missing and when I queried on the repositories all the folder data and reports are there in the repository but not showing up in the EPM workspace. It is weird. Did any one encountered this type of error. Is there any work around to this.
    Any help will be greatly appreciated
    Thanks

    Check BI+ security in shared services. Set someone to BI+ Administrator and have them look in Workspace for the reports. In Workspace, check the Permissions of each folder.

  • I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

    I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

    If you only see the time then that would mean that you see an entry of the current day (today).
    History items from past days should have the date as well in the Most Recent Visit column.
    You should be able to see this changing if you open the last 7 days folder and scroll down.

  • [svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

    Revision: 14009
    Revision: 14009
    Author:   [email protected]
    Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
    Log Message:
    DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes. 
    The element also needs to revalidate if it is resized, whether or not the IR existed before.  This wasn't part of the bug but Hans realized this when he did the code review.
    QE notes:
    Doc notes:
    Bugs: SDK-25354
    Reviewer: Hans
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25354
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

    Please can u answer it fast

  • I want to retrive data from KNVP table but it shows records in miss order.

    Hello all,
    I have written following query.
    SELECT  KPKUNNR KPKUNN2
                INTO corresponding fields of table I_KUNZJ
                FROM KNVP AS KP
                WHERE KP~PARVW = 'ZJ'
                  AND KP~KUNN2 = 'C0100'            .
    KNVP table having following customers for my condition:-
      Kunnr
      100510
      1150010
      1166835
    But it shows records in following order:-
    Kunnr  
      1150010
      100510
      1166835
    So it shows 1st record = 1150010 instead of 100510. I want to show 1st record as 100510. Can any one please tell me why it shows such miss order.

    customers::Kunnr
    100510
    1150010
    1166835
    Actually I want to select 1st record only and insted of 100510 it shows 1150010 kunnr.
    SELECT  KUNNR KUNN2
                INTO corresponding fields of table I_KUNZJ
                FROM KNVP
                up to 1 rows
                WHERE PARVW = 'ZJ'
                  AND KUNN2 = 'C0100'            .
    Becoz
    In KNVP table customers are in following order:-
    Kunnr
    100510
    1150010
    1166835
    But after selection it  shows records in following order:-
    Kunnr
    1150010
    100510
    1166835
    Edited by: megha waykar on Jan 11, 2008 8:38 AM

  • I purchased 15GB of storage but it shows that I only have 14.8GB even after having purchased more. I also removed alot of data and apps. How can I fix this issue?

    I purchased 15GB of storage, but it shows that I only have now 14.8GB available? I also deleted apps and anything that would allow for more space. How can I resolve this issue?

    You. as many other people purchased storage in icloud instead of getting yourself a bigger device (iphone/ipad/ipod). Device storage does not increase with icloud storage purchase. Just like other people you may have to contact Apple for refund and in the future look into buying bigger sized iphone.

  • Updated my apps but still showing 3 up dates after 3 days

    up dated my apps but still showing need to up date

    Contrary to the misleading impressions given by the marketing copy on the Adobe webite, the new CC versions of the Cloud apps are not available until June 17 (Adobe time - probably San Jose - W Coast USA)
    Should arrive in the Cloud within the next 24 hours.

  • (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.

    (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.
    I mostly use technology for education and professional audiovisuals and lights.
    I don't sync  music because I use music from at least 4 different computers. (manually mange music)
    I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
    I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
    I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
    Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
    When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
    Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them.  Those songs would play back okay on the iPad but were unplayable through the iTunes device view.  I had to delete the songs manually through the library along with the playlist and add them again. 
    These seem to be major stability bugs in the "new" music app and iTunes.  My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues. 
    Thank you for actually making it to the end of this manuscript of annoyances.

    Just wondered if anyone had any other suggestions.

Maybe you are looking for