FI Archiving - System error: Customer/vendor line item not on OI basis

While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
Shailesh

Hi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi

Similar Messages

Withholding tax amount exceeds the customer/vendor line item amount

Hi experts
I am having one problem please help me
My user created one down payment, entry is like this
Vendor Dr-193914
To TDS 3878
To Bank 190036
After this he has booked MIRO with the same value 193914 & has deducted TDS 3878 over that invoice
Now when he is going to adjjust that down payment against that MIRO with specific line item 62
system is throwing that error.
Withholding tax amount exceeds the customer/vendor line item amount 002
Message no. 7Q321
I checked invoice booked correctly & TDS also dedcuted properly why system is throwing that error message
please help me
Regards
Nitin Shukla

Hi Madhu
thanks a lot for instant reply
We are using F-54 Down Payment adjustment at this time we are facing problem & we are clearing against invoice
& with specific line item
For Eg. 5100001596 & line item - 53
Regards
Nitin Shukla

Withholding tax amount exceeds the customer/vendor line item amount 001

Hi Guys,
I am trying to release an invoice using VF02 transaction but I recieved the below error message:
Message no. 7Q321
Withholding tax amount exceeds the customer/vendor line item amount 001
There are 2 SAP (718078 and 513201) notes regarding that but they are not applicable in ECC 6.0.
How can I figure out this issue?
Thanks,
Daniel Dorta

Hi,
This may happen because you have give base exemption and after that charge tax. In this case you have posted earlier invoice w/o wht and now you are posting the small amount of invoice on which wht is calculated including the earlier exempt amt. In this case the wht exceeds the base amt.
In this case if possible you first post the invoice with sufficient amount which can deduct the WHT .
If your scenario is different give details.
Regards
Milind Sonalkar

Wht tax amount exceeds the customer/vendor line item amount 001Mess no7Q321

Dear Experts,
We are also getting same error in production"Withholding tax amount exceeds the customer/vendor line item amount 001 Message no. 7Q321"
Please gudie me how to resolve this issue, while posting vendor invoice in T-code - F-43 i am getting bellow error message why because we client requirement is accumulation activity required so is there any solution for this with out changing accumulation activity.
We need to use this accumulation activity.
I would be greatful if you could help us to resolve this issue.
thanks
Seshu

If its relating to TRM- Transaction manager, please implement note no " 1961340 - Calculation of withholding tax for 2nd or 3rd local currency "
Regards
Anil

Need Profit Centre,WBS element fields in Customer/Vendor Line item display

Dear Experts,
In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
Can anyone help me with the solution.
Thanks in advance.
Regards,
Abdur Rafique

I have used User exit, to obtain the above scenario.

NEW GL: Customer/Vendor Line items cannot be displayed per business area

Hello ECC 6.0 Masters!
We have implemented Standard Document Splitting by Business area(BUSA). See below scenario..
ENTRY VIEW
PK     Account          Segment          Amount
01     Customer               100
50     Expense          BUSA1          60-
50     Expense          BUSA2          40-
GL VIEW
PK     Account               Segment          Amount
01     CustomerReconAcct     BUSA1          60
01     CustomerReconAcct     BUSA1          40
50     Expense               BUSA1          60-
50     Expense               BUSA2          40-
However after implementation we discovered that because the Customer/Vendor BUSA is blank in entry view, we now cannot derive reports that are normally based on the BUSA of Customer/Vendor line item, which we used to be able to do prior to implementing NEW GL.
Some of them are below:
1. Debtor Ageing Analysis (Standard)
2. Customer/Vendor line items per BUSA (Standard)
3. Several other Sublegder based custom reports we have that neeed to be categorized by BUSA
My question now is..Is there a way to derive these Business Area information under Vendor and Customer account to produce our reports? Especially for the Ageing which is key to the business process of my client.
I hope somebody there has experienced this before. thanks!
Andrew

Hi
You will not get ageing reports based on BA after new gl migration. You need to bring the info from the new gl tables. one of the easiest ways is to get the info from the table FAGL_SPLINFO by passign BSEG-BELNR. For defining ageing reports in new gl use t code FKI3 and FDI3 for Vendors and Customers respectively.
Regards
Sanil Bhandari

Customer /Vendor line item..

Hi..
One query..for line item display of GL account we select in GL master "line item display"
but for customer and vendor line item display in FBL1N & FBL5N...from where we tick the line item dispaly .
Please reply

Dear expert
For each vendor account, the system notes which line items have been posted to the account. You can specify the sort sequence of the line items by entering a key in the Sort key field within the account master record. This key specifies how the Allocation field is to be filled in the line items posted to the vendor account. When you call up the line item display, the system sorts the line items according to the contents of the field. You can change the sort sequence in the line item display.
Please refer below link
http://help.sap.com/saphelp_40b/helpdata/en/01/a9b6aa455711d182b40000e829fbfe/content.htm
Regards
Ajeesh.s

Withholding tax amount exceeds the customer/vendor line item amt (in MIRO)

Dear Gurus,
MIGO done for 8 material line items WHT has been posted for 7 line items during MIRO. For 8th line item while doing MIRO, the above error is displayed. Kindly advise the possible reason and solution.
Thanks in advance,
Sadashivan

Der AVD,
Thanks for your kind response. Currently, in Central Invoice - no Central Invoice is checked.
Is it OK. For Central Inv. & 1st P.pmt. indicator, the help document says it is used in Argentina only.
We have not yet proceeded for payment stage. Still MIRO has to be completed for the MIGO done
for last line item and thereafter the payment will be done. It is right to clear the downpayment
for the 7 invoices generated now so that this error will not come during MIRO for 8th line item.
In the meantime, I will also go through the SAP notes referred by you.
Thanks and regards,
Sadashivan

Vendor Line Item not cleared after F110

Hi Gurus,
We encountered an issue. The payment run was processed last April 18 and the vendor invoices were captured during the payment run and in the aging report, these invoices didn't appear as Open Item.
In between April 19 until August 19, these invoices are not part of the proposal list until the when they run payment on August 20. The value is zero and in the proposal list, there is a value in the Reason to Print Advice "A".
What is the reason for this?
Thank you.

Hi Dianne Obviar,
For that invoice payment delete uncompleted payment
proposal.
U go through this path select F4 in run date field
There check it any un completed proposal is there and delete
that invoice line item will come for payable
Regards
Surya

In vendor line item not showing withholding tax amount and withholding base

Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.

Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards

Profit Center in Customer and Vendor Line item

Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayan

Hi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R

Due date in vendor line items

I would like to know if it is possible via Customizing to get the due date taking into account a calendar in order to avoid the due date in a non-working date.
If it's not possible via Customizing, how can we get it?
Does the standard cover this requirement?
Thanks a lot in adavance.

Hello Montserrat,
I am not sure whether the functionality can be established via Customizing...based on Customer or Vendor Payment Terms (OBB8).
But, I can advise a solution that can be acheived programatically (technically).
Configure a Substitution step (OBBH), may be for item level, in the form of User-exit and inform your developer to embed the logic for verifying the Due Date in the customer/vendor line item against the calender (using appropriate function modules that are available in the standard) and substitute the Due Date to a working day, if required.
Hope this helps you in resolving the problem.
Pls reward if helpful.
With Regards
Vijay Gajavalli

New error message :duplicate line item

Hi,
We have to add a new error message so that when we try to add a duplicate line item in our qty contract
1. we should not be allowed
2. we should get a error message u201Cduplicate line item not allowedu2019
How to achieve this
Thanks
Arun

Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

FI Archiving - System error: Customer/vendor line item not on OI basis

Similar Messages

Maybe you are looking for