FI Check , check number field

hie gurus , i need your assistance with a field i'm having a problem with for the check number. in my form its showing the last check printed and not the current check. if i look in the table PCEC its at the current check number. does anyone know any other reference for check number field, or how i can go about solving this problem. tried clearing it from the form, still nothing.

Hi Deniel,
Check Number you can get it fin payr table with reference of Document number.
Regards,
Syed Tayab Shah

Similar Messages

Badi for check tax number field

Hi guys!
Can anyone tell if exists a badi that ckecks the field 'TAXNUM' in transaction 'BP' after we put a value there.
I've already check in the transaction 'Bus7' and i only find the function for the event 'check before saving' -'BUP_BUPA_EVENT_DCHCK'.
Thanks in advance.
Hugo.

Hi everybody!
I need understand how implement check of taxnum using transaction BUS3 - view BUTX01.
I need check tax number in transaction FPP2.
I see a post very interesting:
Badi for check tax number field
I create a module function but inside of module function i don't have data for my validation. I think i make a mistake. Help please!
If somebody have a tutorial would be great!!
Thanks!

Check number field coming in blank

I am new to this forum, and I am searching but canu2019t find a solution.
I have a database, which contains a field called u201CCheck Nou201D, which contains the check numbers as well as type of payment received from a contributor.
So, if the contributor paid which a check, then the check number is there, but if they paid by money order, pay pal or cash, then those terms are there.
The problems is when I bring the data into CR, it is only bringing over the check numbers, as number.
Now, I wrote a formula to convert the numbers to text, but it still is not reading the literal data, u201Cmoney order, pay pal or cashu201D.
The formula that I wrote is:
If {2009.CHECK_NO} = 0.00 Then
"*CASH*"
Else
ToText ({2009.CHECK_NO},0,"")
and believe, it or it works, u2018cause the check numbers come in great.
I called tech support up and they told me something about marking the field as u201Calphanumericu201D, and to look to the forum for a solution, or else pay $195 per incident for tech support.
I figure this must be a common occurrence, u2018cause all organizations maintain some type of check register, and there are times, now a days when pays with something other than a check, e.g. wire transfer, debit card, etc.., and if that literal text is in the check number field, Iu2019d like to bring it over as such.
Thx in advance for answering my question.

Here is the formula I have in my CR report:
ToText ({Sheet1_.F3},0,"")
and here is the result I get:
Check No
4204
6008
448
2079
13495
1216
369
320
2227
231
139
351
524
1562
402
5098
1109
2240
922
Where the blank lines are records containing text entries in that field, such as "cash, credit card, paypal".
My problem is that no matter what I'm trying, the numbers come across fine, but now the literal text isn't.
I've tried some variation of the formula as follows:
If IsNull({Sheet1_.F3}) then "" ELSE
if not(Isnumeric({Sheet1_.F3})) then ({Sheet1_.F3}) else 1
As a suggestion from the board, but when I check for errors, I get various errors such as "string needed" or something else.
I'm getting lost on this.
And, I'm sure it is something simple, but I just can't grasp it from the manual or help screen.
Please help!!

How to create Check table for Field Maktx

Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.

Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek

SSO using Kerberso receiving "Integrity check on decrypted field failed (31

I am trying to implement SSO for an application that is running on a WebLogic Server. I have flagged the AD Service user for DES encryption, added spn through setspn, created the keytab file, reset the password (to the same value), moved the keytab file, updated krb5.ini and krb5Login.conf accordingly, modified WebLogic startup command accordingly. When Users try to access the application, authentication fails, and I see Integrity check on decrypted field failed (31) error in the WebLogic logs. Any ideas ? I am attaching the related lines from the log below.
<Sep 29, 2008 9:46:50 AM MDT> <Debug> <SecurityDebug> <000000> <Found Negotiate with SPNEGO token>
Debug is true storeKey true useTicketCache false useKeyTab true doNotPrompt false ticketCache is null KeyTab is devmax01.http.keytab2 refreshKrb5Config is false principal is HTTP/[email protected] tryFirstPass is false useFirstPass is false storePass is false clearPass is false
KeyTab: load() entry length: 60
KeyTabInputStream, readName(): DEV.DENVERWATER.ORG
KeyTabInputStream, readName(): HTTP
KeyTabInputStream, readName(): devmax01principal's key obtained from the keytab
principal is HTTP/[email protected]
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
KrbAsReq calling createMessage
KrbAsReq in createMessage
KrbAsReq etypes are: 3 1
KrbKdcReq send: kdc=dwdev01 UDP:88, timeout=30000, number of retries =3, #bytes=249
KDCCommunication: kdc=dwdev01 UDP:88, timeout=30000,Attempt =1, #bytes=249
KrbKdcReq send: #bytes read=1312
KrbKdcReq send: #bytes read=1312
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
KrbAsRep cons in KrbAsReq.getReply HTTP/devmax01Added server's keyKerberos Principal HTTP/[email protected] Version 8key EncryptionKey: keyType=3 keyBytes (hex dump)=
0000: 2F 02 76 AB 7F 8C B0 6E
[Krb5LoginModule] added Krb5Principal HTTP/[email protected] to Subject
Commit Succeeded
Found key for HTTP/[email protected]
Entered Krb5Context.acceptSecContext with state=STATE_NEW
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType<Sep 29, 2008 9:46:50 AM MDT> <Debug> <SecurityDebug> <000000> <GSS exception GSSException: Failure unspecified at GSS-API level (Mechanism level: Integrity check on decrypted field failed (31))
GSSException: Failure unspecified at GSS-API level (Mechanism level: Integrity check on decrypted field failed (31))

FYI The fix for this was to chang the value for -Djava.security.krb5.realm to be all upper case
Once that change was made authentication passed
Edited by: IDL on Jan 2, 2008 9:25 AM

Check partner authorization field

Hello Gurus,
The check partner authorization field is used to determine which partners are authorized
to release against a contract. Should no check be performed, you may leave the field blank.
where to set this check partner authorization field ?
Many thanks
Frank

Hi
You have to specify the release partners in the Customer master record of the Sold To. If you want to include the Ship To also as the release partner, then in the partner function tab of customer master specify the partner function as AW and give the customer number of the SH. Like wise you can add any no of SH.
Thanks,
Ravi

ABAP-command to check wheather a field in existing in a spec.table/structur

Hello together,
we have a tool to do corrections to CO-PA-transaction data.
Because we have different structures for different operating concerns (and therefore different dynpros for those different operating concerns) we now want to dynamize this tool.
The idea is to have one dynpro with the maximum number of CO-PA-fields and to control via a functional-module which vields are existing for one operating concern and those are not existing for that operating concern to change the attributes to non-changeable.
Is there any command in ABAP to check if one field (e.g. one valuefield) is contained in one table-structure (e.g. table-structure CE1xxxx) ?
Kind regards
Udo

*--Verfy infoobject exit or not
call function 'DDIF_FIELDINFO_GET'
 exporting
 tabname = KNA1 <--here you pass structure
 tables
 DFIES_TAB = <itab> <--get list of fields in the table
 exceptions
 not_found = 1
 internal_error = 2
 others = 3.
if sy-subrc <> 0.
 message text-005 type 'E' .
endif.
loop at <itab> assigning <field>.
*here you validate wether field is available in the structure or not
assign component 'SIGNCH' of structure <field> to <f_sign>.
if sy-subrc ne 0.
 message 'SIGNCH field is not available in table KNA1' type 'E' .
endif.
endloop.
Regards,
Peranandam

Error from sample JAAS: Integrity check on decrypted field failed (31)

I am trying to follow the tutorial for JAAS Authentication located here:
http://java.sun.com/j2se/1.4.2/docs/guide/security/jgss/tutorials/AcnOnly.html
I am trying to run the sample JaasAcn.java but am getting a strange error when I try to log on to my Active Directory.
I am using Java version: jre1.6.0_03
I can login to Active Directory fine with the credentials I am providing, just not with this client, so I know the credentials are valid.
What could this mean?
The Error message is: [Krb5LoginModule] authentication failed
Integrity check on decrypted field failed (31)
Here is the full output:
C:\Progra~1\Java\jre1.6.0_03\bin\java -Dsun.security.krb5.debug=true -Djava.security.krb5.realm=PRSDev.local -Djava.security.krb5.kdc=192.168.40.72 -Djava.security.auth.login.config=jaas.conf JaasAcn
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt f
alse ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is fa
lse principal is null tryFirstPass is false useFirstPass is false storePass is f
alse clearPass is false
Kerberos username [ILea]: sra
Kerberos password for sra:
[Krb5LoginModule] user entered username: sra
Using builtin default etypes for default_tkt_enctypes
default etypes for default_tkt_enctypes: 3 1 23 16 17.
Acquire TGT using AS Exchange
Using builtin default etypes for default_tkt_enctypes
default etypes for default_tkt_enctypes: 3 1 23 16 17.
KrbAsReq calling createMessage
KrbAsReq in createMessage
KrbKdcReq send: kdc=192.168.40.72 UDP:88, timeout=30000, number of retries =3, #bytes=144
KDCCommunication: kdc=192.168.40.72 UDP:88, timeout=30000,Attempt =1, #bytes=144
KrbKdcReq send: #bytes read=587
KrbKdcReq send: #bytes read=587
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType[Krb5LoginModule] authentication failed
Integrity check on decrypted field failed (31)
Authentication failed:
Integrity check on decrypted field failed (31)

FYI The fix for this was to chang the value for -Djava.security.krb5.realm to be all upper case
Once that change was made authentication passed
Edited by: IDL on Jan 2, 2008 9:25 AM

Check for required fields before locking subforms and submitting

Hello,
I have a 5-page form with many questions, to be completed by the original requestor and multiple approvers. What I'm trying to do is have the original requestor's Submit button on p. 3 lock the input on the first three pages, but first check if all those fields have some content. I currently have all the fields on pp. 1-3 set to "Required" in the object properties, but my script still locks them when there's is one empty one. Here's what I have:
//Lock portions of form
Page1.access = "readOnly"
Page2.access = "readOnly"
Page3.access = "readOnly"
//Save document, allow user to change name
app.execMenuItem("SaveAs");
//Submit via e-mail
Submit_REAL.event__click.submit.target = "mailto:[email protected]" +
"?subject=Subject text" +
"&body=Message";
Submit_REAL.execEvent("click");
The automatic check for required fields happens after the pages get locked. I would like the check to stop the process before it locks the pages. Is there any way to check all at once that all "Required" fields on those pages have some content before allowing the script to proceed? I know how to script it to manually check the 50 or so questions on those pages, but I would like to avoid that. Thanks for any help.

There are a few problems that I can see from the start. First, your code is going to pick up EVERY node that exists on these pages. Some of those nodes will not have a rawValue, and some will not have an actual name. As an example, you can take your code and create a text field to dump all of the names of the nodes that you get when you pull in all of the nodes this way. Here's an example:
The result:
Now, the question is, do you have a consistent naming convention for your fields that might be empty? That could be text fields, radio button lists, etc. For instance, I always prefix the names of objects in order to more easily keep track of what they are in scripts. Since I'm doing that, I can check the name of the field for tf, nf, rbl, cb, or whatever I have included to make sure that I'm checking an actual field before I check for things like rawValue.
var nodeName = oNodes.item(nNodeCount).name;
if (nodeName.indexOf("tf")>-1 || nodeName.indexOf("rbl") > -1 || /*check other field types*/) {
//insert your code to check for empty answers here
As for your line 7 issue. The syntax problem is that you've put extra parentheses in your if statement. Take out the parentheses that are just before and after the or "||".
*This is my fourth attempt to reply. Something was going on with Adobe/Jive earlier, I suppose.

IPad app problems it won't. Let me download apps.it says check billing info I check everything number by number letter by letter

iPad version 4.2.1 app problems it won't. Let me download apps.it says check billing info I check everything number by number letter by letter it still won't work everything on my billing is correct

If you had money in your account when you purchased a paid app and Apple didn't claim on the payment to your bank until after the download it maybe that there was insufficient balancce in your account to complete the purchase and therefore you'll need to wait until you have the funds to make the payment, when you have billing issues it won't even let you download free apps.
If that isn't the case then give iTunes store a call or email them and they can tell you exactly what is wrong with the account

I need to add check whether 21 fields of a internal table are empty or not.

Hello,
I need to add check whether 21 fields of a internal table are empty or not.How can we write a code for the same wand what would be the correct syntax for it.
I tried entering all the fields in the IF loop with AND condition but its giving syntax error.Perhaps this is because the lenght of the IF condition would be more than the allowed one.

Hi,
After the select quiery.
If not itab is initial.
Message 'Table is not empty' type 'I'.
Endif.
Regards,
Jagadish.

How can I enforce automatic spell checking for selected fields of data entered by form users?

I'd like to be able to enforce spell checking of selected fields in the forms that I've created using LiveCycle Designer 8.2 at run time, as opposed to design time. I understand the version LCD 8 has a nifty new spell checker for form designers. But I want to spell check the data entered by users using Acrobat Reader. And I want to enforce the spell checking automatically on selected fields only.
Presently it seems that users filling in my forms, must know how to manually right-click on each field and select "Spell Check" from the resulting dialog box in order to check for spelling errors in the data the user has entered in the form.
I would like to discover a way to enforce spell checking in selected fields, just as I am able to do in forms created using Acrobat Pro. In Acrobat Pro, I can set a property for each field to require spell checking. but that feature seems to be missing in Livecycle Designer.
I've check the Object model for XFA forms hoping that I might find a method I can call with a Javascript, to check spelling based on an event such as onBlur. But I haven't found a spell check method.
Am I missing something simple? Is there a way to set each field to be spell checked when a user is filling in the form using the free Acrobat Reader?
Our users are not sophisticated and requiring them to spell check each field separately just won't cut it...
Any help on this will be greatly appreciated.
Thanks!
-David Bartholomew

Hi David,
Two things...
At design time set the locale of the form to one that Acrobat spell checks. For example English (US) and English (UK) locales have spell checkers; however English (Ireland) does not. Check the Warnings tab to see if spell checking is supported for your locale.
If your form locale supports spell checking then you can go to the button script below.
If you form locale does NOT support spell checking then Stephanie has a great work around to force spell checking (http://forums.adobe.com/message/2233945#2233945).
Bring a regular button onto the form and in the click event have the following:
app.execMenuItem("Spelling:Check Spelling");
Which will open the spell checker for all fields. Thanks to Paul for extracting all of the accessible menu items (http://forums.adobe.com/message/1912914#1912914).
Good luck,
Niall

How to check for missing fields in the file?

Hi friends,
I have a file to file scenario in which if any of the fields have a blank value, i have to put the file back in the source folder. If none of the fields are missing, the scenario should work normally.
Can anybody tell me how can i check for the field lengths and if any of the fields are blank, how do i send it back to the original folder.
Waiting for your responses,
Divija.

Hi Divija,
>>how can i check for the field lengths
Since you need to basically check if the field has a value or not, i dnt think you need to check for the length of the field. Instead, you can use any one of the booloean functions available in the graphical mapping editor to check if the field has a value or not(filed value true or false)
>>how do i send it back to the original folder.
You can maintain a flag variable in the target structure such that if any of the source fields donot have values, the flag's value becomes 1 else it remains 0.
Now, you can check if the value of flag is equal to 1/0 in the bpm and accordingly send the data.
If in case, you donot want the flag to come in the target file that is loaded/sent from the bpm in the end, i think even tat can be taklen care of.
You can create two receiver communication channels and define one file adapter in each such that one has the destination as the actual target directory and the other has the original source directory as the destination.
Regards,
Sushumna

How to check a checkbox field value in fw9 PDF form

Hi,
I got a PDF given form IRS (http://www.irs.gov/pub/irs-pdf/fw9.pdf). While creating a widget to this pdf form to sign it, I merged the custum data to those PDF form fields using API setMergeFields.
All the data fields are merged fine except the checkboxes. I tried by passing the values to the merge_fields array as 'On', '1', 'checked', 'checkbox(checked)' but no luck
What is wrong here in checking the chexbox field in this fw9 PDF or How to check a checkbox field in a form?
Thank you,

Hi Simon,
I re-added and edited the fields of fw9 form by pdf printer. While doing so, I made fields as ready only so that, the data cannot be edited in the form through the widget but will be merged the data to fields only be the code. Wherein Im using the widget only for signature but not for form filling.
Here, Im able to merge my custom data to all fields while creating widget but not to the fields of checkboxes. The checkboxes fields which are made ready-only are not allowing me to merge the value as checked by the API.
Please help me,
Thanks you,

Visio 2010 Validation for Checking the number of a specific type of shape.

I have written a rule for flowchart for checking the number of Start/End Shapes in a document.
The FilterExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(), HASCATEGORY("Start/End"))) > 0
The TestExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(),HASCATEGORY("Start/End"))) = 2
(Since totally there are 2 shapes: 1 Start and 1 End Shape)
However, it is not working. Can anybody tell me what is wrong in the expressions.

Well, it worked for me, so I want to check that you modified the Start/End master to have the User.msvShapeCategories row with the value "Start/End", as I did?
A Category is not a Master
David J Parker MVP (Visio) http://blog.bvisual.net

FI Check , check number field

Similar Messages

Maybe you are looking for