FI document posting through ALE/Idoc - FIDCC1/FIDCCP01
Hi all,
Currently I am working on a requirement ALE/IDOC:
I am at the receiving R/3 system(v4.5B). Now, I am able
to receive the message FIDCCP01 with extension for the
withholding tax. To process and post this FI document, could someone
tell me what are all the steps that I have to follow,
the function module I have to use and the user exits I
have to look at.
Many thanks in advance.
Hi,
By parameters, we mean the Inbound IDoc settings that must be carried out before you process one. Take a look at http://www.intelligenterp.com/feature/archive/kasturi2.jhtml?_requestid=17281
and
http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc
for details on IDoc inbound and outbound parameter configuration.
Could you please mention the error message you receive when using the test tool?
Regards
Similar Messages
-
Reverse HR/FI Posting through ALE/IDOC
We had a scenario in which Payroll Run will happen in one instance & posting will happen in another instance through ALE/IDOC.
Now we want to do the posting reversal though ALE/IDOC.
There is no specific message type for HR/FI Posting Reversal
Can anyone help on this?
Regards,
RaviRavi,
What bharathi said is exactly correct Infact i was worked with HR/FI posting.
Posting of payroll from HR to FI is our (HR job) but reverse posting is absolutly FI consultant job. Since before that we already estblished a link between G/L a/c's and Wagetypes.
by creating symbolic accounts
I suggest if you post this question in FI you will get more reply positvely
Best Regards -
Issues in employee replication from ECC to CRM through ALE/IDOC
Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George -
Error while reversing document posted through cash desk
Hi,
I have posted a payment through cash journal/cash desk (FPCJ) and closed the the lot. Now I want to reverse the payment, however SAP function module 'FKK_CJ_PROHIBIT_RVRSL_OF_DOCS' is throwing an error - 'reversal not performed'. Does anyone know how to reverse a payment document posted through cash journal if it's lot has already been closed?
Thanks,
Suhas.HI Ravi,
If a payment is posted through the FPCJ and lot is closed , payment cannot be reversed that's is standard functionality, there are lot of notes on this which gives you alternative steps that need to be taken.
check note 644870.
thanks,
Vikram -
Table for line items of budget document posted through FMBB transaction.
HI,
I am looking for Table of line items of budget document posted through FMBB transaction.
There is table FMBL but it is breaking the amount into 12 parts.
Thanks.Hi
check the tables
FMBDA
FMBDP
FMBDT
FMBH
BPDK
Regards
Anji -
Bussiness Place (BUPLA) in documents posted through REFX
Dear All,
The bussiness place is not getting updated in documents posted through REFX, even though their is a option to assign Section Code (SECCO) in Bussiness Entity Master data (from T.Code REBDBE) their is no feild available to assing the bussiness place. So do anybody have any solution to populate the bussiness place in documents while posting through REFX.
Regards
JKT.Hi,
Business place has to field by manually. But if you want you can restrict through Validation and substitutions. here what we are doing maintaing both section code and business place. what substitution we are created so far here when section code this one then business place is this. like that we are created.
Depend upon configuration you might be create any validation.
Hope this is clear, if yes assign points. Any problem revert me.
Regards,
Sankar -
Send email afer "FI document posted" through PRRW
Experts:
I want to send out an Email to applicent afer "FI document posted" through Tcode:PRRW , Is there have any user exits or BTE I could use?
or some standard function provided by SAP?
The reason for send mail is just want to let user know we got the receipts(sometimes needs several days by express) and ready to deal with
Please advise!One simple way to achieve this is to build it into your workflow step, as the event CREATED gets triggered every time you save the trip in status 'to be settled'. But also everytime the trip is saved, the event CHANGED is triggered. So, you need a workflow step 'Wait for event CHANGED' what is ending the old workflow instance, whereas the actual CREATED creates a new instance.
1. Events, which should be triggered in order to approve trip requests
(entered by transaction TRIP) or trip Plans in general. These events
are relevant for the manager responsible for the approving process.
The events are:
- 'PlanApproved'
- 'PlanCreated'
- 'PlanChanged'
- 'PlanCancelled'
2. Events, which should be triggered in order to approve trip payments.
These events are relevant for the travel expense department, which
has to release the payment process. The events are:
- 'Changed' (in the sense of Expense report changed)
- 'Requested'
- 'RequestApproved'
- 'Created'
- 'Approved'
- 'Cancelled'
- 'Deleted'
- 'RequestCreated'
- 'RequestWaits'
- 'ExpenseWaits'
- 'RequestSettled'
- 'RequestTransferredFI'
- 'ExpenseSettled'
- 'ExpenseTransferredFI'
(Documentation link)
http://help.sap.com/saphelp_470/helpdata/en/d5/202038541ec006e10000009b38f8cf/frameset.htm
So in this instance, whilst the standard template is delivered, you do need to configure an additional step in this case using "created" rather than "changed" to trigger the additional workflow needed in addition to the steps delivered inside the
workflow template.
Hope it would help!
Sally
Edited by: Sally Redmond on Mar 6, 2012 4:51 PM -
Create idocs for FI documents posted before ALE setup
The users were creating FI documents normally during May 2006, but the ALE financial interface was not set up until the end of that May. We are using a FI message type which is a copy from a standard one.
Is it possible to create idocs from those FI documents posted before setting up the ALE connection so those FI documents can be sent via ALE?
CMTo copy number ranges to a new year you do with the transaction OBH2.
When you want to transport number ranges you ask for problems. Only for a new implementation you can do it but not when there are existing number ranges with postings for that company -
How to add line items to Accounting Document posted through MIRO ?
I need to perform Additional posting when Posting through MIRO transaction..i tried with INVOICE_UPDATE BADI but this was not useful...Please let me know if there is any way to add additional posting to Accounting Document created through MIRO.
If any user exit , BADI ot BTE present?Hi,
Check the BTE's:
00001020 POST DOCUMENT: Prior to final checks SAMPLE_INTERFACE_00001020
00001025 POST DOCUMENT: Final checks completed SAMPLE_INTERFACE_00001025
00001030 POST DOCUMENT: Posting of standard data SAMPLE_INTERFACE_00001030
00001050 POST DOCUMENT: Accounting interface SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish -
PO vendor partner role through ALE/IDOCs
We have ALE/IDOC interface with vendor. The requirement is PO will be sent to the ordering vendor and invoice should be received with PI vendor. We are using stardard message types for purchase order (outbound) and INVOIC (inbound).
Could you please guide me on how to set up partner profile in WE20? Do I need to define both the vendors as partner? and what partner function should I select in inbound and outbound for both the vendor? Any other settings is required?
Thanks in Advance
SagarHi,
The earlier answer was to your this question
Could you please guide me on how to set up partner profile in WE20?
Now to set up the partner function follow as below
In Spro>Purchasing>partner determination >first define the partner roles , role VN for vendor,role PI for invoicing party and OA ordering address are standard available then
Define permissible roles per Vendor A/C group ..based on account group of vendor you need to define a perticular partner role is permitted
Go to define partner schmeas for vendor master >select L1 vendor>partner functions in procedure>here you check your roles are available there 2 check boxes if you wnat a perticular role mandatory in vendor master you can check mandatory and if you want an option of changing the partner you can make it changable , better to make these two roles mandatory and OA changable
Go to assign partner schemas for vendor master assign L1 for your vendor a/c group
Then go to partner settings in purchasing document define partner schema select std.po >function in procedure>check roles VN,PI,OA
Select no change mandatory and higher level for all three
Go to assign schemas for docuemt>assign 0002 for document type in question
Thanks
Diwakar
Edited by: diwakarnd deshpande on May 13, 2011 8:24 PM -
Hi folks,
I am new to the area of ALE-IDOC's .
could you please provide the document for that if possible.
I want the manual steps for that with transaction codes.
Could you please provide the documentation alone for the IDOCS.
Thanks & Regards,
SurendraHi,
Please refer following links,
https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC
https://wiki.sdn.sap.com/wiki/display/ABAP/ALE+IDOCS
http://wiki.sdn.sap.com/wiki/display/ABAP/OutboundIdocThrough+ALE
Thanks & regards,
ShreeMohan -
Upload data from legacy system to SAP through ALE IDOC
Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
ThanksHi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid -
G/L document post through fb01
Hi Gurus,
i am using bapi : BAPI_ACC_DOCUMENT_POST for posting G/l document.
In the flat file i am using G/l account, posting key,amount,costcenter, profit center, customer, distch# etc.
For this bapi i am filling Criteria internal table for
all the line items, i am getting error that profit center not determined or not entered.
while i am skipping criteria internal table for some line items accounting document is created successfully.
pls guide me how to decide either criteria internal table
needs to fill for that line item or not
Thanks & Regards,
Radhakrishna.Hi,
If u have to fill the <b>profitability segment data</b> then u need to fill the criteria internal table .In FB01 transaction while we r creating document this profit. Segment button appears just above the quantity field. The <b>profitability segment data</b> appears based on G/L. It wont be available for all G/L's.
It should be configured. If it is not clear still plz revert back.
Regards,
savitha -
Auto clearing of documents posted through VF11
Hello Experts
We'r working on ECC 6.0.
I'am not able to understand that while billing is being cancelled, both the original billing & excise documents are getting cleared automatically with their reversals while doing VF11.
We've not executed even auto clearing (F.13).
We dont want them to get cleared automatically.
Where is the configuration for that?
Regards
KapilHi kapil
If you are reversing the billing document & excise documents using VF11 then automatically the original billing document & excise document also get cleared . because those billing & excise documents are the reference documents to the Accounting document and that is the reason it cancels the original documents and the reversal document number will be generated .
Even after cancellation also an accounting document will be getting generated. So you have to do changes in the accounting document in OBA7. with the help of FI consultant
But it is advisable not to make any changes in the accounting documents
Regards
Srinath -
Hi All,
I m new to ALE-IDCO.
Can u plz give me documents or link to the document related to ALE-IDOC.
Is there any Video or E-learning for avilable for learning ALE-IDOC?
Thanks & Regards
Sachinhttp://www.sdn.sap.com/irj/sdn/ale
ALE configuration procedure
ALE/IDOC Material
ALE Idoc pdf
thanks
anurag
Maybe you are looking for
-
Cross-reference does not work inside the object states
Hi All, I use InDesign CS5.5. I have four pages document. first three page has full for text and the fourth page has multi-state object. I am trying to insert the cross reference from the third page to the multi-state object (fourth multi-state objec
-
its is possible to back up the songs that i have on my iPod touch in iCloud or either in iTunes?
-
Custom Info Panels files on remote location
I want to host the panel description and localization dictionary files on remotes servers... Can this be posible?
-
How to check whether weblogic server is in DEBUG mode or not
Hi I want to check in my OSB proxy whether weblogic server is in Debug mode or not? IF abv thing is not possible , I have check whether server is in development mode or production mode from my OSB proxy service? I m not able to find any doc on this??
-
A few problems with windows 7 on my mac with boot camp
1) how do i use all the functions of my mac in the windows os environment? like two finger scrolling, isight, two finger right click, and my speakers? 2) when i boot up windows the time is totally wrong is there any way i can keep this from happening