Fi Extraction and BWFIOVERLA
Hi All,
I have a question regarding FI Extraction.
The issue was that we have the FI extraction in our system which brings in data once a day, while we wanted to increase the frequency of this load.I checked SAP note 485958. It suggested some enhancements in BWOM_SETTINGS.
But I could not understand where exactly the change needs to be done and how??
Pl help me with the steps.
Also, I believe if BWFIOVERLA is set to 'X' then you can get the delta until the previous day(that is until yesterday) but if it is left blank then you can get delta until day before the previous day that is until day before yesterday.
In our system we have this as blank. What will be the consequences if I set it as X? For example, if I check BWFIOVERLA as X, then how will it affect my tomorrow morning's loading??
Thanks and Best regards,
Sharmishtha Biswas
Hi,
Hope the value of Parameter BWFIOVERLA is actually depended on parameter BWFITIMBOR in table BW0M_SETTINGS.
The default Parameter value of the parameter BWFITIMBOR is 2:00 AM.
Case 1:
If the data extraction started before 2:00 am of particular day (10.04.2007) the data selected will be upto day before the last extraction run. If last extraction completed by 09.04.2007, 00:50 am. Then the data extracted will be upto 08.04.2007, 24:00 Hrs. Because of parameter BWFISAFETY (value = 1 Day).
Case 2:
If the extraction is started after 2:00 am, then the data extracted will be upto 09.04.2007, 24:00 Hrs.
To overcome the case 1, we maintain the parameter BWFIOVERLA (value x). So that if you extract the data before 2:00 am of 10.04.2007 also, you can extract the data upto 09.04.2007, 24 Hrs.
Regards,
Vishwanath.
Message was edited by:
Vishwanath H.E
Similar Messages
-
I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.
cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR -
Extraction and Reporting is not working in BI SYSTEM
Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath -
Maintenance view: how to read EXTRACT and TOTAL table
Hi, All,
I created a maintenance view, as stated in the documentation, there are 2 internal tables EXTRACT and TOTAL available in running environment. Now I want to read a record from the internal table by using "READ TABLE...."
In my example: the table strucutre has A, B, C 3 fields.
So I tried to use "READ TABLE EXTRACT with key A=' xyz' assigning <fs>", in this case, the syntax check shows error saying that the specified type has no structure and no component can be called.
So how can I search a row in the table EXTRACT and TOTAL by giving a field value? Is there any other way to get data from the table?
Thank you!Hi Yongying,
I know this is an old post, but, may be this is still helpful for you or for others with the same problem.
Just add the option "CASTING" at the end of your READ statement:
"READ TABLE EXTRACT with key A=' xyz' assigning must be full typed or at least, be of the same type of the Z table from which is generated the itab EXTRACT.
Regards,
José Gabriel. -
Error message when trying to extract and install
Why do I keep getting an error message for CS6 beta when I try to extract and install, message file missing?
I assume you downloaded from here: http://labs.adobe.com/technologies/photoshopcs6/
Did you successfully download the file and check file sizes match? Do you extract ok? PC, I assume? What OS are you using?
How far did you get in the installation? Did you select TRY rather than enter serial number? Did you enter your Adobe ID?
By the way, you should change your name to something other than your email as the bots will go nuts when they find that and you may get spam.
Pattie -
Using extract and existnodes in a SQL query
I have created a table having one column of datatype xmltype in oracle 9i and inserted 2 rows. When I try to execute the select query having extract and existsnode it is giving me ORA-00904: invalid column name.
CREATE TABLE xml_tab ( xmlval sys.xmltype);
INSERT INTO xml_tab VALUES (
sys.xmltype.createxml('<?xml version="1.0"?>
<EMP>
<EMPNO>221</EMPNO>
<ENAME>John</ENAME>
</EMP>'));
INSERT INTO xml_tab VALUES (
sys.xmltype.createxml('<?xml version="1.0"?>
<PO>
<PONO>331</PONO>
<PONAME>PO_1</PONAME>
</PO>'));
SELECT e.xmlval.extract('//EMPNO/text()').getNumVal() AS empno
FROM xml_tab
WHERE e.xmlval.existsnode('/EMP/EMPNO') = 1;Correct forum for extract() and existsnode() SQL functions is /Products/Database/XML DB.. Please post there
-
When we go for Business content extraction and when we go for LO/COPA etc.e
Hi Dear Friends
When we go for Business content extraction and when we go for LO/COPA etc.extractions
Thanks
LearnerHi,
It depends on the KPI you are extracting for,if Business Content Extractor provides you with those then there is no need for generic extractors.
In CO-PA the KPI for profitability differs from client to client.You have Business Content for CO-PA also...
Cheers -
Unable to start Extract and Replicate process?
Hi,
I have setup GG b/w two 10.2 databases in two different server(RHEL 5) . But unable to start the extract and replicate process
Source
GGSCI (prod.naveed.com) 1> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER STOPPED
EXTRACT STOPPED EXT1 00:00:00 00:43:42
GGSCI (prod.naveed.com) 2> start mgr
Manager started.
GGSCI (prod.naveed.com) 3> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:43:48
GGSCI (prod.naveed.com) 4> start extract ext1
Sending START request to MANAGER ...
EXTRACT EXT1 starting
GGSCI (prod.naveed.com) 5> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:43:56
GGSCI (prod.naveed.com) 6> view params mgr
PORT 7809
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (prod.naveed.com) 7> view params ext1
–extract group–
extract ext1
–connection to database–
userid GG_ADMIN, password GG_ADMIN
–hostname and port for trail–
rmthost 172.168.1.11, mgrport 7809
–path and name for trail–
rmttrail /home/oracle/golden_gate/dirdat/lt
–DDL support
DDL INCLUDE ALL
ddl include mapped objname NAVEED.*;
–DML
table NAVEED.*;
GGSCI (prod.naveed.com) 8> exitTarget
[oracle@Test golden_gate]$ ./ggsci
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x86, 32bit (optimized), Oracle 10g on Apr 23 2012 07:06:02
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (Test.naveed.com) 1> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
REPLICAT STOPPED REP1 00:00:00 00:35:39
GGSCI (Test.naveed.com) 3> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (Test.naveed.com) 4> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
REPLICAT STOPPED REP1 00:00:00 00:36:06
GGSCI (Test.naveed.com) 5> view params mgr
PORT 7810
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (Test.naveed.com) 6> view params rep1
-Replicat group-
replicat rep1
–target database login –
USERID GG_ADMIN, PASSWORD GG_ADMIN
–file for dicarded transaction –
discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
–ddl support
DDL INCLUDE ALL
DDLERROR DEFAULT IGNORE RETRYOP
–Specify table mapping —
MAP NAVEED.*, TARGET NAVEED.*;
GGSCI (Test.naveed.com) 7>Thanks it worked, I m able to start both extract and replicate process.
But when i create a new table and do some DML it is not getting replicated in the TARGET DB?
Source
GGSCI (prod.naveed.com) 1> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING EXT1 00:30:52 00:00:10
GGSCI (prod.naveed.com) 2> view mgr
ERROR: Invalid command.
GGSCI (prod.naveed.com) 3> view params mgr
PORT 7809
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (prod.naveed.com) 4> view params ext1
--extract group
extract ext1
--connection to database
userid GG_ADMIN, password GG_ADMIN
--hostname and port for trail
rmthost prod.naveed.com, mgrport 7809
--path and name for trail
rmttrail /home/oracle/golden_gate/dirdat/lt
--DDL support
ddl include mapped objname NAVEED.*;
--DML
table NAVEED.*;Target
GGSCI (Test.naveed.com) 3> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
REPLICAT RUNNING REP1 00:00:00 00:00:02
GGSCI (Test.naveed.com) 4> view params mgr
PORT 7810
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (Test.naveed.com) 5> view params rep1
--Replicat group
replicat rep1
--target database login –
USERID GG_ADMIN, PASSWORD GG_ADMIN
--file for dicarded transaction –
discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
--ddl support
DDL INCLUDE ALL
--Specify table mapping
MAP NAVEED.*, TARGET NAVEED.*;Source
SQL> conn NAVEED/NAVEED
Connected.
SQL> create table tab_1 (id number,rnd_str varchar2(12));
SQL> insert into tab_1 values (1,'test_1');
SQL>commit;
SQL> select * from tab_1;
ID RND_STR
1 test_1Target database:
SQL> conn NAVEED/NAVEED
Connected.
SQL> select * from tab_1;
select * from tab_1
ERROR at line 1:
ORA-00942: table or view does not exist -
hi gurus...
I am looking for TCodes in Extraction and staging of data in BW/BI...and the major upgrades from BW3.5 to BI7.0 regarding reporting only...
Help is much appreciable....
Regards
SandeepHi,
Tcode for Extraction and staging
Transaction Code (TCODE) Description
RSA3 Extractor Checker
RSFH Test Transaction Data Extractors
RSMD Extractor Checker
Staging
RSDBC DB connect
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSD5 Internal: Maint. of Techn. Chars
RSDBC DB connect
RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
RSDB_INIT Initial Download of D&B Data
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSA1 BW Administrator Workbench
RSA2 OLTP Metadata Repository
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSH1 Edit hierarchy initial screen
RSH3 Simulate hierarchies
RSHIER Hierarchy maintenance w/o AdmWB
RSHIERINT Hierarchy maintenance from AdmWB
RSHIERSIM Simulate hierarchies
RSICUBE Maintain/Change InfoCubes (Internal)
RSIMG BW IMG
Regards,
Rakesh -
How do I extract and combine documents?
How do I extract and combine documents?
Hi,
Welcome to Adobe Forums.
For combining documents you need to either have Adobe Pdf Pack or Adobe Acrobat , however ,In order to extract documents form an existing pdf you will need Adobe Acrobat .
We offer a free trial of adobe Acrobat XI PRO for 30 days , you can follow this link to download and try using this :-
https://www.acrobat.com/free-trial-download.htmlhttps://www.acrobat.com/free-trial-download.html
Let me know if you need any further assistance in using this product.
Thanks!!
Tanvi -
Extracting and Loading XML document
We need to extract and load an XML document into the database
For e.g.
<ROW> <EMP_ID>1</EMP_ID> <EMP_NAME>SSK</EMP_NAME>
<RESUME> Resume of sssk
</RESUME>
</ROW>
We need to load emp_id, emp_name to emp_id, emp_name field in the database and <RESUME> field to a CLOB.
The table is as follows
EMP_ID NUMBER
EMP_NAME VARCHAR2(100)
RESUME CLOB
How exactly is this done using the XSU utility? Does it support loading of <RESUME> data in this case to a CLOB.
Where could I find examples of doing this.
nullThe "first child" of most of your elements is a white-space node containing a newline character. Your code incorrectly assumes it is an element node.
-
LO's extraction and HR extraction 7.0 flow
Dear All,
Any one suggest LO's and HR extraction is it possible in 7.0
LO's extraction and HR extraction 7.0 flow Installing the Standard Business Content any one knows please reply me ASAP.
Any standard Transformations are available In BI 7.0 please tell me the procedure and what is the Patch level.(Regarding LO's and HR).
Regards
Rama Rao GAll the transformations are not available even with the latest patch
of BI Content(patchlevel--0011,Release 703),very few are
available.
You may have to create the transformations manually as per
your requirement. -
My options and tools have changed. Unable to extract and delete pages in my PDF document. How can I get them back?
Well could it be another Adobe I had before? I bought software and in that under tools on the far right had all kinds of options. Also under view and window. Then I bought another adobe product to try and convert a PDF into a word doc and now under tools that is all it wants to do and my view and window options have changed. Not to mention the new software i bought isn't converting it just spins. So I am bummed that neither is working for me. It is more important for me to be able to extract pages then it is to convert. Which adobe product allows this? Maybe I can unistall and reinstall the Adobe software I spent 300 dollars on vs the 19.99 product.
-
Golden gate extract and replicate process are not running.
All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AMThanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem. -
I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next
if you have a win os you should have dl'd an exe and a 7z file.
put both in the same directory and double click the exe.
Maybe you are looking for
-
Had to buy a new computer, how do I transfer all data from my iphone4 to new computer?
-
Can't install newer versions of iTunes and can't un-install current version
HELP! That's a good start to my first post I think lol... hey at least I'm still laughing, even though I feel like crying! I am having (probably similar to many from what I can see from this forum and also from google search) problems updating my iTu
-
I am having a sender file adapter and is using NFS as the Transport Protocol. This channel is throwing an error that " directory does not exist". What can be the possible solutions for this problem? When I had previously checked this , it was workin
-
The allow power button to put computer to sleep is missing in the preferences on my MB Air? I have the funtion but no way to turn it off?
-
Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides. I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case. I tried creating