FI GL 0FIGL_C10 Infocube and 0FI_GL_14 datasource

Hi experts!
In FI GL we will use the 0FIGL_C10 Infocube. We need to report at "cost center" level and at "functional area" level. But
we also need to use other levels in the Product Hierarchy, even at material level
How can we add the material in that cube?
I've read thar the flow is 0FIGL_C10 Infocube, then 0FIGL_O10 DSO, then 0FI_GL_10 infosource and finally 0FI_GL_10 datasource.
But that datasource doesn't have the material. I've also read that the new 0FI_GL_14 datasource has new data, like the "Accounting document number"... Does anybody know if it is posible to add the material also, and how?
Can i use the new datasource (0FI_GL_14) instead the old one (0FI_GL_10)?
Thanks in advance for your help,
Regards.

Hi,
This may be of help.
http://help.sap.com/saphelp_nw70/helpdata/EN/e2/f16940c3c7bf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/91/5608cdffdd4c7291b87d07b2ca1d67/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/bd/e16840b151181ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/frameset.htm
Hope this helps.
Thanks,
JituK

Similar Messages

Difference between 0FI_GL_40 and 0FI_GL_14 Datasources

Hi,
We need to extract data based on General Ledger Line Items into BI.
Currently we have 2 datasources matching to the requirements. Would like to know which would be feasible when we compare the 0FI_GL_40(G/L Accounts: Line Items) and 0FI_GL_14(General Ledger (New): Line Items Leading Ledger) datasources.
Request to let me know all the differences, uses and drawbacks of using these datasources. Would be helpfull if all the details relating to these datasources can be provided.
Thanks

http://help.sap.com/saphelp_nw70/helpdata/EN/88/3c36861f874739a916df63ab6d7ca0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/frameset.htm
You may please find out the differences from the above link.
Regards,
Ravi

Installation of 0FI_GL_20 and 0FI_GL_14

Hi Experts,
I want 0FI_GL_20 and 0FI_GL_14 DataSources for new GL accounting. IN ERP system only 0FI_GL_10 is present currently.
I searched SDN network and SAP notes for relevant information. I am particularly looking for some SAP note which explains the requirements and procedure in ERP side and in BI side for the installation of these two DataSources. If somebody have come across such an SAP note, kindly share it to help me.
Thanks and Regards
Anil

Hi,
Following link might be useful.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
Thanks & Regards,
Nayan Joshi

New Gl 0Fi_GL_14 and impact on existing _4 AP and AR datasources

We will be moving to new GL and I'm investiagting the 0FI_GL_14 Datasource for this purpose.I have couple of questions on this datasource.
I couldn't find any related AP and AR datasources for new GL. Does this mean we can continue to use 0FI_AP_4 and 0FI_AR_4 for AP and AR reporting ??
Our current dataflow for GL is 0FI_GL_4 -> GL_O02 ODS-> Custom cube
Since we have lot of reports out of the GL custom cube can we set our new path as follows so that we do not have to re create all the queries. This way we will still be existing cube with ne wGL datasource and ODS.
0FI_GL_14-> 0FIGL_O14->Existing customcube.
Points will definetley be awarded. Thnaks

Hi,
I had also done 0FI_GL_10 in the past with a similar concept as yours and it did work. Plus, during that time I had researched on AP and AR datasources and I don't think there are any new ones like we have for GL. I believe the new datasources for GL are because of the 2 new tables in ECC (FAGLFLEXA/FAGLFLEXT).
I think the solution that you are trying to build should work, will need some testing though, but there is a lot more to offer in the GL_14 datasource than the old GL_4, so you might want to build a new cube to accommodate that. Or you can update 2 cubes from the GL_14 ODS, 1 would be your existing one and other would a new cube, so when the users are ready you can migrate them from the existing to other.
Regards,
Nikhil

GL AND AR datasource and data targets - question for BI 7.0

Folks,
It has been sometime I did GL, AP and wanted to know if this still holds good
GL Balance : Extract via 0FI_GL_6 and load it to 0FIGL_C01 with or whihout an ODS OFIGL_O06.
GL Line itms: Extract via 0FI_GL_4 and load to ODS 0FIGL_O02.
Similiarly use AP_6 and AP_4 Data sources for Accounts Payable. I am assuming GL and AP Data sources are coupled.
Now has anything changed in BI 7.0 or because of ECC5 or ECC6.
For All the above I did not see any transformation BI Content I only still see 3.x flow.
whats up with 0FIGL_C10 and 0FI_GL_10 ?.
At the end of the day I only need GL balance and their line items. So what should I use ?.
thanks
Gman

Hi GMAN,
1) GL and AP datasources extract from 2 different sets of OLTP tables. They are NOT coupled
    from BW extraction pointof view....But In R3...when a financial posting is made to a GL
    account....a related posting made into AP tables......
2) In GL or AP functionality nothing has changed due to: BI 7.0 or because of ECC5 or ECC6.
3) In the new Business Content Release...."SAP NW 7.0 BI Content Add-on 3 SP06"....
    SAP gave new cubes, ODS etc....
New Business Content link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Good luck, BB

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

New gl 0fi_gl_12 and 0fi_gl_14

Hi Experts,
we have a requriment of extracting new gl and we are using 0fi_gl_12 and 0fi_gl_14 extractors.we found the both data sources mentioned in sap ecc but we din't find any business content related to the both.
what should i have to do to get the business content related to 0fi_gl_12 and 0fi_gl_14 in my sap bi.is there any note or any
steps to be taken to get those.
i can only find 0fi_gl_10 in my sap bi business content,i came to know that both 0fi_gl_10 and 0fi_gl_12 has got the same structure,so can i use the 0fi_gl_10 content for 0fi_gl_12(maintaing a generic extractor with the same structure as 0fi_gl_10)
if so what about the possible approach for 0fi_gl_14.
Thanks in advance

Hi there,
You're using the enhancement package 4 in BI right?
But you need the Enhancement package 3 EHP3 for ECCS (R/3 system) where the 0FI_GL_14 will exist (no on the BI).
Hope this helps,
Regards,
Diogo.
Hi thanks for the reply,
we are using enhancement package 4 in the eccs(r/3 system).where as netweaver 7.0 for sap bi.
we find the extractor in sap ecc(0fi_gl_12 and 0fi_gl_14).
so for the related data source in sap ecc (0fi_gl_12 and 0fi_gl_14) we dont find any business content in sap bi.
for 0fi_gl_10 we find business content in sap bi(including infocube,dso,transformation...).in the similar way do we find
business content for other two extractors in sap bi.
Thank You.

Fields in infocube and DSO?

Hi Experts,
                 I need some information regarding maximum number of fields in infocube and DSO?
     According to my knowledge, in Infocube - characteristics --248
                                                                         Keyfigures--233
                                                In DSO - key fields - 16
                                                              Data fields -749
             I thought dat DSO has 3 tables. maximum number of columns in a table is 255. So 255 * 3( 3tables in DSO) is 755.
                                             755(total fields)-16(key fields)= 749(data fields).
Is it correct?can anyone clarify my doubt pls?
Thanks in Advance
Jani Sk.

Hi,
       In cube , table consists of 255 columns, in which 6 are internally used by SAP,16 for dimensions and the remaining 233 are for Key figures. Each dimension key connected to 248 master data tables at max through dimension and SID tables.So, We can analyse the data at 16*248 dimensions.
ODS/DSO is a two dimensional flat structure.It consists of total 1024 columns, out of which 16 are used for Key fields and remaining 1000 are for data fields.
Thanks,
Sandeep

What's the difference between using a connection pool and a datasource

Howdy. I figure this is a newbie question, but I can't seem to find an
answer.
In the docs at bea, the datasource docs say
"DataSource objects provide a way for JDBC clients to obtain a DBMS
connection. A DataSource is an interface between the client program and the
connection pool. Each data source requires a separate DataSource object,
which may be implemented as a DataSource class that supports either
connection pooling or distributed transactions."
In there it says the datasource uses the connection pool, but other than
that, what is the difference between a connection pool and a datasource?

Thanks for the info. I think it makes some sense. But it's a bit greek.
I'm sure it'll make more sense the more I work with it. Thanks.
"Chuck Nelson" <[email protected]> wrote in message
news:3dcac1f5$[email protected]..
>
Peter,
Here is a more formal definition of a DataSource from the Sun site
"A factory for connections to the physical data source that thisDataSource object
represents. An alternative to the DriverManager facility, a DataSourceobject
is the preferred means of getting a connection. An object that implementsthe
DataSource interface will typically be registered with a naming servicebased
on the JavaTM Naming and Directory (JNDI) API.
The DataSource interface is implemented by a driver vendor. There arethree types
of implementations:
Basic implementation -- produces a standard Connection object
Connection pooling implementation -- produces a Connection object thatwill automatically
participate in connection pooling. This implementation works with amiddle-tier
connection pooling manager.
Distributed transaction implementation -- produces a Connection objectthat may
be used for distributed transactions and almost always participates inconnection
pooling. This implementation works with a middle-tier transaction managerand
almost always with a connection pooling manager.
Does that help clarify the distinction?
Chuck Nelson
DRE
BEA Technical Support

How to get the size of all InfoCubes and DSO's?

Hi all,
My client wants a complete list of all InfoCubes and DSO's in terms of size (no records but KB). This list of the Cubes / DSO's gives us a picture of the used storage per Area and can be charged. Iu2019ve seen some threats and looked into the possibilities of ST14 and DB02. ST14 provides the ideal list but with a restriction for the top 30 InfoCubes and the top 30 DSO's. Does anyone know how to get such a list for all InfoCubes and DSO's?
Thnx in advance,
Henk.

Hello Henk,
while I am searching for some performance problems in our BI, I tried to look through the new DB02 of BI 7.0. And there is a function which helps a lot creating lists of Cube, DSOs and so on:
Start DB02
On the left side find SPACE -> Additional Functions -> BW Analysis
A Doubleclick will give you a broad survey of the current memory disposition regarding BI/BW objects.
In the BW Area "Cubes & related objects" you can find Infocube E- and F-Facttable. Depending on the Compressed state of your cubes you will find more data in E or F. Just doubleclick on one of these Entries. In my environment currently F-Tables are more effective.
You will then get a list of all Infocubes with size.
You will have to this for E and F Tables and some up over the Infocubes. But, because this will show only the Cubes and not the partitions of the cube it will be much easier to handle than DB02OLD.
Perhaps this helps, because you did not mention your BW/BI release.
Kind regards,
Jürgen

Infocubes and info objects

Hi guys,
i'm new to BI. can any one differentiate between Infocubes and info objects..
please be a bit specific.....

Hi,
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
InfoObject: Basic building block of BW.. ( Its like a field )
Definition
Business evaluation objects are known in BI as InfoObjects. They are divide into characteristics (for example, customers), key figures (for example, revenue), units (for example, currency, amount unit), time characteristics (for example, fiscal year) and technical characteristics (for example, request number).
Use
InfoObjects are the smallest units of BI. Using InfoObjects, information is mapped in a structured form. This is required for constructing InfoProviders.
InfoObjects with attributes or texts can themselves also be InfoProviders (if in a query).
Regards,
Ram.

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

How to include new driver and configure datasource in NW 7.0

Hi,
I have deployed my application in the app server and now i need to add the ms sql drivers to the application server and configure datasource to it.
Can any one help me to configure the datsource in Nw 7.0 and also how to add the driver files tp app server..?
thanks in advance
jayakumar

Hi,
Follow these links:
How To Install and Configure External Drivers for the JDBC & JMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
http://saphelp.border-states.com/EN/b3/cc633c3a892251e10000000a114084/content.htm
http://www.sapag.co.in/JDBC%20Adapter-Type2JDBCDriver%20Deployment.html
Regards,
Nithiyanandam
Reward points

Develop report based on INFOCUBE and ODS

Hi,
Pls, can anybody help regarding developing reports based on INFOCUBE
and ODS object
i am using SAP BW 7.0
what is the transaction code for reports
what are the steps to develop reports
Thanks\
- Mubeen.

There is no transaction code as such as you have to use the front-end application to create queries off your Cubes/ ODS.
open Bex query designer -> select info provider (cube or ods) -> drag and drop the keyfigures in columns, -> char in rows -> save.
Also look at
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

FI GL 0FIGL_C10 Infocube and 0FI_GL_14 datasource

Similar Messages

Maybe you are looking for