FI settings for New PL

Dear Sap Experts,
MM consultant have created one New plant for our client.
As a FI consultant, should I assign/change/configure any settings based on New plant.
If any settings should I change, Pl send me that settings asap.
It is really appreciate, if anybody send the settings asap.
Venkata Raju

I could find he answer for this question i.e. we have to set Valuation area as Productive in T.Code (CKMSTART)
So if any one get the same problem, you can use this T. code and solve that issue.
Venkata Raju Khottari

Similar Messages

Settings for new iphone {streaming}

can someone provide me with the correct settings for new iphone
i am streaming clips via wowza, need top quality/ small file size's

No idea what a wowza is.
What are the specifications for this wowza thing, whatever it is? Is it a server? When you googled the iPhone's video playback capabilities, what did you find?
bogiesan

What settings for new clips in my project?

I have some new clips that I need to add to an existing project. The info for the existing project is
DV PAL anamorphic preset and the footage that has been imported and editited to the project was taken from my standard def DVD's and exported to quicktime using MPEG streamclip with these settings
*Compression: Apple DV-PAL*
*Frame-Size: 720x576*
*Frame-Rate: 25*
*Sound: Uncompressed Stereo 48kHz*
I have some new clips to add, which are HD and this is the info
Video Tracks:
h264, 1280 × 720, 30 fps, 9.69 Mbps
Is it best to use the same MPEG streamslips settings and export to Quicktime as per the original footage or is there a better way to preserve the higher quality of the HD file that will still work with the original footage in the project?
Many thanks

I have followed the steps above but the quality is noticably worse than the rest of my footage in the project. I wonder if I am doing it correctly or if I should start a new project?
I export from mpeg streamclip to Apple DV/DVCPRO NTSC :Quality 100% 30 Frames Frame size 720 x 480
I then use JesDinterlacer to perform the standards conversion. I select output then export to quicktime movie and use these settings

Auto code completion settings for new ABAP Editor

Dear all,
I am working in New ABAP editor but i am unable to set auto code completion,
please tell about customising of new ABAP editor for Auto code completion.
Thanks and regards,
Gaurav Sood

Hello,
       1.      Choose Utilities ® Settings.
The User-Specific Settings dialog box appears.
       2.      Choose ABAP Editor.
       3.      Set the new editor mode.
From:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/29dee414483fe1e10000000a11466f/frameset.htm
Regards,
Jorge Diogo

Journal book settings for new year

Hi Gurus
Is there any setting that has to be done in journal book when there is change of the year (31.12.2011 ) ?
Now i have changed only the interval numer range (inserting new line with new year )for all document types and changed
the Posting Period Variant (with new year). Are these settings sufficient?
Thanks in advance
Regards

1. Open posting periods OB52
2. Add number ranes for document types if you are using year specific document numbers OBA7
3. Carry forward closing balances to next year(F.07 & F.16)
4. Exchange rates maintenance (OB08)
5. If you have any customized things like year specific data maintenance Z tables, you have to update them.
6. If you are using asset accounting, then AJAB and AJRW can be done.
7. version maintenance in controlling(OKEQ)
Rgds
Murali. N

Jumper Settings for new Hard Disks in RAID

How do i have to jumper new disks which should be added to my RAID. In factory settings they come with the cable select setting. Do i have to set all the jumpers to master or does cable select work too?

I know that setting the drive to slave didn't work when I tried it just for curiosity's sake.
It may vary by drive vendor whether you use 'cable select' or 'master.' My xserve raid's a little busy right now so don't want to pull my drives out to look but I'm think that half my drives are set to 'cable select' (maxtor 250GB drives in my left bank) and the other half (hotachi 500GB drives in the right bank) are set to 'master.'
You'll know pretty quickly if it works or not: when you put the drive carrier into the chassis, the drive carrier's status LED (not the blue activity light but the tri-color LED adjacent to it) red light will either turn to green or not. If it turns green, the system has recognized the drive as a valid candidate, if the LED remains red it has determined the drive is not.
You can also click on the individual drive in RAID Admin to determine individual drive status.
FYI, I use RAID Admin 1.5 w/1.5 firmware, have SFP controllers, dual 512k cache, dual cache batteries

Basic Settings for new BW QA Box

Hi All,
i got a problem in BW QA.
The BW QA server was a new one. I have created new requests for all the master data infosources and transported them sucessfully.
The problem is when i opening the infopackage which was transported to QA i am getting a popup with "Caution ! - The transfer method has changed" and when i see in the infopack the processing method was changed to ALE and i could'nt see the PSA option there. The infopack in Dev was with psa.
This is the case with all the infopacks in QA.
Do i need to do any settings as this is a New QA box.
Can anyone send me the basic settings need to done for the new BW qa box document.
Thanks in Advance
Appreciated with Rewards

Ram,
have you created the source systems in QA - that should be done and when you transfer - make sure you have also transferred the datasource ...
Arun
Hope it helps...

Customize default user settings for new RemoteApp logins

Hi all,
I'm poking around with RemoteApp on Windows 2012 R2 and have it set up to use a centralized file share for the user profiles and everything seems to be working ok. Is there a way for me to customize some of the options in a user's profile for the first time
that they fire up a RemoteApp? Is it like a physical desktop where the hidden "c:\Users\Default" profile gets copied into the new user profile? I know once a user saves settings in a RemoteApp (browser bookmarks, default program options, etc....)
it gets saved in their profile on the central file server but I'd like to save them as much time as I can by giving them a precustomized profile.
Thanks

Hi Brian,,
Thank you for posting in Windows Server Forum.
Kindly check below thread where described for editing the rd web page file and some other method to set default user.
How to set default logon domain RD Gateway and/or RD Web
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f02bd61f-d6fd-4c05-b17a-deffcc61a4e9/how-to-set-default-logon-domain-rd-gateway-andor-rd-web?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Change default security settings for new Discoverer users? How?

Hello, using Discoverer 10g with SSO integration.
I've created two roles and create in advance users in the DB user, granting them
one of the two roles. The two roles privileges for Discoverer are already configured.
This way, when I create the user in the DB before launching Disco, granting the user one or the other role, I should be all set about what the user can or cannot do on Discoverer (Plus).
So far the theory :)
The problem is that the full permission given by Discoverer to each new user override the role settings, so each new user can do everything (instead one of the roles forbids saving and sharing, for example).
I have to go to Disco Admin and uncheck the "Plus/Viewer" checkbox for the user to make roles actually work as expected.
How can I set Discoverer user default as "Cannot do anything" on Plus/Viewer so that roles apply without further admin intervention?
Thanks
Mario

Thanks a lot Rod.
The problem here is we need to allow portal users the ability to access Discoverer Plus without using Disco Admin: once a user is registered in the SSO, he should be able to connect successfully to Discoverer.
So we need creating user privileges on behalf of Disco Admin.
Tough job, but it seems it ca be done.
Regards,
Mario

Best print-to-pdf settings for news articles

Hello, can anyone recommend appropriate settings to use for print to pdf of newspaper articles from a web browser? I archive articles from news sites as pdfs, which I then later use for both reading on pcs and portable devices and as print-outs. Specifically, what pdf standard is best to use in this case? I'm asking mainly because text in the pdfs I've made so far is much less smooth and difficult to read than I thought it would be when viewing on pc, even with acrobat 10 smoothing turned on. It makes the right edge of letters appear to be cut off. Mind you, i'm looking at the pdf at 86% (fit to height); when I zoom to 100%, the text becomes smooth again. And the pdfs also look very sharp on my portable devices. My screen is 1920x1080.
Cheers

If it is a graphic, then a higher resolution would be useful. You should be able to tell if it is a graphic by zooming out and checking the pixels. If you are capturing the fonts, then they should look about the same at any zoom. You might want to be sure the fonts are embedded. Just as a check on some of the issues, try the press or print settings to see if things improve. The other option is to go back and modify the settings to a custom form, but good to start with one that look reasonable first -- or at least compare some of the settings files.There are other issues of the print resolution (the default 1200 dpi is typically a lot more than you need).

PDF save settings for new Firefox reader

I have seen discussions on how to change your own settings in Firefox so PDFs display correctly (Viewing PDF documents in Firefox 19+) however I am looking for a solution on how to save PDFs so they display correctly within the default new Firefox reader. Our PDFs are looking bad and I can't go into each clients browser settings and fix (http://www.cherrybekaertbenefits.com/wp-content/uploads/2014/07/ACA_Infographic_072114.pdf). Are their any settings within the Acrobat Distiller that will fix this without the viewer having to go into their own settings? My team uses Creative Cloud so any updates or setting solutions would be greatly appreciated! I will report back if I find anything on the Firefox forums but so far I've seen nothing.

I believe I've found a solution. I had inquired on both the Mozilla and Adobe forums hoping someone out there was having a similar issue.
Kudos to jscher2000 on Mozilla!!
The Solution--
'Optimize for Fast Web View' appears to be the issue.
Note: When you uncheck this option the PDF becomes significantly larger but no more bad color. I've found if you also uncheck 'Preserve Illustrator Capabilities' and 'Create Acrobat Layers from Top-Level Layers' as well then the file size goes back down quite a bit.
Optimize checked= 183k
Optimize unchecked = 923k
Optimize, Preserve and Layers unchecked = 566k

How Best to Import iPhone 4 video into Premier Pro CS5 - Settings for new import "sequence preset"?

Shooting video with my iPhone 4 (ATT version) and am trying to import file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.
The problem is that I am simply guessing on how to import sequence, and the result is that I am getting motion artifacts and generally inferior quality. I am using iMovie 11 as my basis for comparison.   Not surprisingly, iMovie 11 imports from iPhone beautifully, but when I've looked around inside of it for properties, there isn't much to see.
From using Apple's built in quicktime "inspector," it is possible to see that iPhone4 video has following properties:
".mov" file
dimensions:   1280 x 720
codecs: H.264, AAC
Color Profile:   HD (1-1-1)
Audio Channels: 1
Total Bit Rate: 10,543
PPRO - PRESET DESCRIPTION:
<my comments in angle brackets>
???? = Question
General
Editing mode: DSLR    < Correct?   Best i could do, perhaps it should be "Mobile Device" perhaps it doesn't matter>
Timebase: 29.97fps
Video Settings
Frame size: 1280h 720v (1.0000)    <from apple quicktime "inpector" window >
Frame rate: 29.97 frames/second     <from apple quicktime "inpector" window >
Pixel Aspect Ratio: ????
Fields: N????
Audio Settings
Sample rate: ?????
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Seeking advice on how to smoothly and *losslessly* import/ingest iphone4 footage into PPro CS5. (I am not worried about exporting for iPhone display, which is what most of the information I can find relates to).
Thanks in advance, Michael

Wow. Thanks Colin.
When I follow your approach, I don't get the same "sequence preset" dialog box popping up.
FU question, though, the motion is frequently jagged. Is there a way to smooth out/increase the quality of the rendering?    I have 16gb ram, Mac Pro.   which is able to handle iPhone video rending fine in quicktime.   (I've tried rendering for "performance" and "memory" but both seem to produce, eh results.).
Michael

How do I change the default settings for new calendar events?

So I am relatively new to Mac. I've been using iCal in conjunction with iCloud/iPhone heavily and one thing that I found really annoying is that by default, every new event that I make has two alerts already set. One message and one email message. It's really frustrating to have to go and set both alerts to "None" everytime I make a new event. I primarily use the calendar on my iCloud-synced iPhone to view and keep track of events and the Mac to actually create the events so there's no reason for me to need alerts on the computer. Is there any way to change the preferences so that there is no default alert?

Look in the menubar, iCal > preferences > General tab > uncheck "Add a defult alert...."
Regards,
Captfred

Can default settings for new entries be changed?

When entering a new event, the default setting is "all day." This rarely is the case. Can it be turned off?

The main system fonts cannot be changed. There are a few utilities which will allow you to alter the font size in some menus.
This however is strictly a Microsoft issue. They coded Word to use a small font size for comments and gave the user no way to modify it. The only company that can fix this is MS.

Jumper settings for new hard drive

i'm installing a WD Caviar 120GB ATA-100 drive on my parents' 450mHz G4. The WD intallation drive indicates a need to place a jumper over pins 3 & 4 of the new drive, but need a jumper be used on the Mac's old drive? It's only 6GB in size and is what i'd like to use as the master drive. i believe the jumper on the old drive is over pins 5 & 6. Thanks!
iBook, Power Mac Mac OS X (10.4.8)

The new drive has the proper jumper setting, is in the middle (and correct) ATA cable position, and is recognized and has been formatted by the computer. Unfortunately, when i boot the G4 the blinking globe appears for about ten seconds, and then the "no OS" folder appears for another ten seconds before OS X successfully loads and the computer operates normally, with both drives functioning fine. Almost a success story, but it makes me nervous. Thanks for all the help so far!

FI settings for New PL

Similar Messages

Maybe you are looking for