FI :TDS Certificate  After EHP4 new PDF format

Hi  experts,
After apply EHP4 (enhancement pack 4)  TDS certificate (T-code J1incert) new functionality  has given for printing in PDF format
while printing PDF format . systeme throughing error .
error : 'Cannot find PDL type for output device LOCL'  Message no. FPRUNX113.
can you provide solution for error.
Regars,
K.satyanarayana

Require to maintain table J_1IEWT_ACKN_N in se38.
Regards,
Sumeet Sortur

Similar Messages

  • Change in report format after exporting from pdf format to excel format.

    Hi,
    I got a problem while exporting the pdf format of the Report to Excel format "Fully-Foramtted Grids and Texts".
    The format gets automatically changed.
    Is there any solution to this problem.

    Can you give some more details?
    Which version are you using (and which patch level - if any).
    Also what formatting is default on the reports and what is the default format in excel.
    What exactly is different between PDF and excel?
    Another possibility is that font substitution is going on??

  • Why unable to sign PDF with certificate after applying Nitro PDF password protection? (despite it explicitly allowing signing with certificates)

    I used Adobe Reader XI to sign PDFs with certificate, which worked perfectly. Except that the PDF could still be edited by other programs (for example, Nitro PDF) after the signing (but not the fill out fields and the signature). To apply password protection makes sense to avoid changes in the PDF being made after it has been signed. So I applied password protection via Nitro PDF that allows only enter fill-out fields and signing. But when I open it with Adobe Reader, the filling out works fine, but the signing part is not available to click on it (all of the buttons under "Sign" tab are grey). When I go on the Security properties with Adobe Reader, I can explicitly see that signing of this PDF is allowed and yet the option is not open to use for me anymore.
    Any ideas on why it is the case and what I could do about that?
    Many thanks!
    O.

    Actually yes, I just asked my colleague to assist me with this, he password-protected the PDF with Acrobat 8, explicitly allowing for signing and fill-out functions, it also appears in Adobe Reader under security properties as "allowed", but it is not open to use in the Reader for me anymore (grey buttons).

  • Error in creation of TDS Certificate.

    Hi
    I am facing one problem in creation of TDS Certificate after successful creation of Remittance challan
    (j1inchln) and Bank challan updation(j1inbank).  The error msg is as follows:
    "Please maintain entries in layout  customizing:"
    When I an went see in the customising setting - Form has assigned to Company Code.
    Please guide me accordingly.  Thanks & Regards
    Narayana

    Hi,
    From the message it seems either you are using wrong company code in Organisation data of the PO or the company code need to be assigned to country in spro-enterprise structure-Financial accounting-edit copy check company code.
    Please check this.
    Dhruba

  • TDS Certificate New Format

    Dear ALL,
    Can Any one Help me to change the New format of TDS Certificate form 16a . The Old format is Still Appearing in the System. Our Basis Guys are Uploaded the Patches also even though we are unable to get the New format of TDS Certificates. Kindly give me your suggestions.
    Thanks
    Anbu

    Hi,
    I have checked this in the SAP Note 1046758, They have given some of the corrections. All the Corrections are given in the Support pack Application 29. But we have Implemented the Support pack App 29. But the Problem is not yet solved.  Can you help me how to change the format in this form16a.
    Thanks
    Anbu

  • New TDS Certificate .

    New TDS Certificate .
    As IT Department has changed TDS certificate script from 1st April-06 onwards,
    So whether SAP has provided any new script for the same
    Also how to get the BSR code and Acknowledgement in TDS certificate
    Regards
    Raj

    hi,
    Kindly apply the note 1046758 & 1062383 for getting the New Tds format.
    You need to create some data elements and apply the .sar file as given
    in the note.
    Requesting you to go through the solution part for better understanding
    of the things that needs to be done.
    Regarding .sar file kindly note the following..
    Please note that the .sar file needs to be first uploaded in client
    000 and from theron you need to transport to other clients.
    The application of .sar file needs to be done at the customer end.
    Kindly take the help of your basis team and apply the .sar file.
    The presence of .sar file can be verified as under:
    1> go to se71
    2> give the form name as j_1iewt_cert
    3> in the subobjects,click on page window.
    4>then click on display
    5> in the next screen double click on "info1" and it will become blue
    6> then press F9 and there you can see the "acknowledge number details
    For getting the cheque no.& BSR code you need to write your own code
    inside the Function Module J_1I7_USEREXIT_CHEQUENO_CERT.
    Raghav

  • Cannot load the report on PDF format after running report

    Hi,
    I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work.
    An error as 'An error occurred trying to load this document'. (The Acrobat reader is loaded)
    Thanks for your help in advance.
    null

    Hello,
    I have found a similar problem, I think the problem my be with your acrobat settings.
    On Acrobat 5. open an existing pdf file. Then on the menu go to Edit\Preferences\General. => A new screen should pop-up, click on 'Options' on the left hand side, and then check out your WEB OPTIONS. I tend to untick the 'Display PDF in Browser' and leave the others ticked.
    I hope this helps.

  • URL Portlet PDF format, in new window?

    I have successfully installed the URL portlet and can render an Oracle report within in HTML format. I want it to display in PDF format, but it doesn't work...it displays source code. Is there a way to do this?
    Also, the report display in place...how can I have just the URL displayed to link out to new window? Thanks...

    Are you trying to render the PDF document inside the portlet? Portlets are really only meant to render content that can be displayed inside an HTML table. For a PDF document to share a page with other content, it needs to be in its own frame.
    You can create a portlet that just has a link in it if you want the report to display in a new window. This is pretty easy using Content Areas.
    null

  • Why am I unable to select within the URL bar of a new tab after opening a .pdf file in Firefox 4?

    To repeat the problem:
    1.) Open a .pdf file in Firefox 4
    2.) Open a new tab by using the (+) tab button
    3.) Try to select within the URL bar (unsuccessful)
    I cannot seem to direct my browser to a new website in a new tab after viewing a .pdf file within the browser.

    Restore your default toolbar by going to Customize - Restore Default Set. I just found it out myself.

  • QM-How to add a New "Output Format" in Certificate Profile?

    Hello QM Functional Experts,
    Can any of you tell me how we can add a custom "Output Format" in the Certificate Profile (QC01/2/3). I tried the Configuration approach via QM-Quality Certificates-Certificate Profile-Define Data Origin. I do not see an option here to add a New Output Format.
    If this is posted in a wrong forum, I apologize. I am not able to find the correct forum for QM. Please redirect me and I will be glad to post it in the right forum.
    Thanks,
    Nagesh

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

  • In our application we have CV Builder and after submit we want to show in  pdf format. and also we want save and send option.

    In our application we have CV Builder and after submit we want to show in  pdf format. and also we want save and send option.

    1. For the PDF see TCPDF
    2. For saving see PHP Insert Data Into MySQL
    3. For sending see Basic PHP mail() Function code to send emails from a form | InMotion Hosting

  • How to convert report to pdf format  after that I want to send on mail

    Hi
    Guru
    What is my requirement . I want put push button on output list of a normal report. When user click on mail push button, mail should go to customer mail id according to customer  no i gave input  for customer no in selection screen.
    For this I need what is function module (Code) for convert a report to pdf format and whats function module for send mail to customer.
    Plz help me out
    thanks
    Durgesh

    Hi ,
       I think this is helpful
      FM are used to convert pdf file and attachem.
    CONVERT_ABAPSPOOLJOB_2_PDF
    SO_DOCUMENT_SEND_API1
    *& Report  ZSPOOLTOPDF2                                                *
    *& Converts spool request into PDF document and emails it to           *
    *& recipicant.                                                         *
    *& Execution                                                           *
    *& This program can be run in background or online and a spool request *
    *& will still be created                                               *
    REPORT  zspooltopdf2.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_sender LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_delspl  AS CHECKBOX,
               p_online no-display.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i,
           w_spool_nr like sy-spono.
          %_print LIKE pri_params.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Write statement to represent report output. Spool request is created
    if write statement is executed in background. This could also be an
    ALV grid which would be converted to PDF without any extra effort
      WRITE 'Hello World'.
      new-page.
      commit work.
      new-page print off.
      If p_online = 'X'.
      Processing performed when program calls itself when run online 
        gd_spool_nr = sy-spono.
        EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
        EXIT.
      endif.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
      ELSE.
        gd_spool_nr = sy-spono.
    If executed online, it submits a program to perform the write statements
    instructing it to create a spool request, this could be another program
    which just performs the write statements and then exports sy-spono
    to memory. But in this example it calls itself passing X to parameter
    p_online, which takes it down an alternative procesing path.
        submit ZSPOOLTOPDF2
               with p_online = 'X'
               to sap-spool
               spool parameters   %_print
              archive parameters %_print
               without spool dynpro
               and return.
      ENDIF.
    Get spool id from program called above
      IMPORT gd_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
      PERFORM convert_spool_to_pdf.
      PERFORM process_email.
      if p_delspl EQ 'X'.
        PERFORM delete_spool.
      endif.
      IF sy-sysid = c_dev.
        wait up to 5 seconds.
        SUBMIT rsconn01 WITH mode   = 'INT'
                        WITH output = 'X'
                        AND RETURN.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email USING p_email.
      CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
          FORM delete_spool                                             *
    FORM delete_spool.
      DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
      ld_spool_nr = gd_spool_nr.
      CHECK p_delspl <> c_no.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = ld_spool_nr.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.

  • My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

    my phone has been changed under warranty by the apple store in germany.
    ı need a change document to register the phone in my country again.
    ımeı numbers of old and new must be in the document.you can send an mail in pdf format
    as soon as possible please.
    your's respectfully.
    new phone serial no:DQ******TC0
    old phone serial no:DN*******T9Y
    Product:
    iPhone 4S
    Serial Number:
    DN*******T9Y
    Service Requested:
    December 3, 2012
    Status:
    Repair Complete
    <Edited by Host>

    No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
    But you can find the IMEI numbers yourself. Read the ENTIRE article:
    http://support.apple.com/kb/HT4061

  • In our application we have CV Builder and after submit we want to show in  pdf format.

    In our application we have CV Builder and after submit we want to show in  pdf format.
    this is html page and we want to create pdf after click on Submit.
    Please provide Solution as soon as possible.

    1. For the PDF see TCPDF
    2. For saving see PHP Insert Data Into MySQL
    3. For sending see Basic PHP mail() Function code to send emails from a form | InMotion Hosting

  • I have a collection of thousands of ebooks mostly in epub  & some in PDF formats.  After migrating to Maverick all books disappered from my Ipad. Please help.

    I have a collection of thousands of ebooks mostly in epub  & a few in PDF formats.  After migrating to Maverick all books disappered from my Ipad. Please help. In itunes library book option has vanished. What do I do?

    Hi Akshay,
    If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
    This is how you can specify a page break:
    1. Select the image
    2. Goto Object->Object Export Options
    3. Select EPUB and HTML tab
    4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
    Regarding your question about images:
    You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
    Regards,
    Pooja

Maybe you are looking for