FI-TV Modification of standard screens and fields in Trip Scheme

Dear Forumers,
tyring to modify standard screens in transaction TRIP. In SPRO -- Dialogue management -- IMG Management of schemes and fields I made a copy of trip scheme for our country variant and trying to change settings of some fields, but there is no reaction in TRIP - all fields are the same, no changes... What am I doing wrong? Could anyone help me with this stuff?
Best regards,
El

Dear Waqas,
Let me describe the problem, so that you will understand the challenge.
Prerequisite: I need to add an additional CHAR or TEXT field "Document number" in TRIP transaction which will allow a manager to manually enter a document number of a trip. Further this field has to be added in reports as well, so that manager could get all the trip details due to this new field "Document number".
Problem: I've been trying to set up Trip Schema for trip entry scenario Travel Manager (TRIP) via IMG Schema and field control (or transaction FITVFELD, which is the same as the above mentioned IMG), in order to find some field which can be potentially used as a template for the field "Document number" (for instance, we'll take some look-alike field, change its text and use it as a field "Document number").
As you might know, this IMG implements field control - standard view of the field or alternative, puts some default values to the filed and so on. But no matter how I try to change fields in TRIP, there's no reaction from the system - the fields do not change. For instance, I put some default values to field "City" - but this values do not appear in TRIP as a default value.
I'm using a copy of a trip schema 01 and PL.
What am I doing wrong?
Looking forward for your reply!
Best regards,
El
Edited by: Eldar Hamitov on Jun 12, 2008 11:44 AM

Similar Messages

Where to find screen and field definitions?

Dear All,
I need to be able to find all the screen and field definitions that exist in the SAP Repository for an application I am developing. Can anybody tell me where to find them? I specifically need to know which field types are defined for each screen (GuiTextField, GuiComboBox, GuiTableControl, etc.) as well as their IDs as they appear in the SAP GUI.
Can anybody help with this? I've looked all over and haven't been able to find out where this information is stored in the data dictionary.
Thanks very much in advance!!

Paul foto which operating system are you using? You will want to open the applications in the method which is typical of your operating system. You can find more details at Launch CC apps after install - https://helpx.adobe.com/creative-cloud/help/launch-creative-cloud-apps.html.

Modification to standard screen

Hi,
Was wondering is it possible to modify a standard SAP infotype screen, like hiding some textbox/ checkbox of a standard screen. I've already have a customised module pool. Please comment

Hi Lawrence,
      Using Transaction Variants:
       T-Code: SHD0.
       Transaction variant is like super imposing. Firstly give the T-Code which you want to change. Then create a New screen(z...) and this screen needs to be customized. You can inactivate few fields or give some default values or even remove some fields.
        Whenever the standard t-code is called, Transaction variants puts up the Z.... screen you have created. This is a safer and an easier method.
Best Regards,
Shree Tejus.
Edited by: Shree Tejus on May 25, 2010 8:30 AM

Modification to standard screen for IT1050 - OM module

Hi,
Was wondering is it possible to modify a standard SAP infotype screen, like hiding some textbox/ checkbox of a standard screen. I've already have a customised module pool, but that is for a subscreen (additional enhancement).I'm doing it for IT1050, an OM infotype. T588 wont work, SHD0 wont work, Please advise
Thanks & regards,
Lawrence

Hi Sriram,
Yes it requires the access Key to modify, which is i'm restricted from doing that, plus any oss check will wipe out the changes, besides that is violating the the client process, was wondering if alternative screen will do for standard screen, do u have any materials/ link to share on that matter.
Thanks & regards

Translation for fields on Standard Screen ( Added Field via Extensibility Explorer )

Hi Experts,
I have added two fields in a Standard Quick create and added an Embedded Component in a Standard Thing Inspector.
Issue is client wants that field's labels to be multilingual now as i am not able to download the translation file(xlif) into local machine how would i achieve this?
and i m not even able to translate the HEADER of the TAB which i attached as EC in a standard TI.
It would be great ig any one can show some pointers or workaround...
Regards,
Dhruvin

Hi Horst,
I have created Code List Data Type in SDK and have around 100 Code values and each to be maintained into 3 lang FR, ES, IT for descriptions.
XLIFF file is XML in coding and I have my values and translations ready in Excel file.
Any way to quickly get the translations from Excel into XLIFF file easily OR any shortcut in SDK that I do not have to manually keep on copy-paste each translation as target tag in this XML code of XLIFF file.
Even tools does not seems to be user friendly. Please advice with method OR tool to complete this.
Alim

Modification in Standard screen

In the Transaction ME21N screen ,i have got a requirment to Disable the "save" icon...
Friends , Please guide me to the right approach..
Thanks.

Hi Kiran...
Thank you for ur Reply.. But I m not supposed to use BADI. so..
Do i have any otherway to achieve the same?
Any Idea please...
Regards.

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

Screen sequance and Field selection group

Dear All,
Kindly help me by explaining the different steps( in detail) to modify the screens of Media product and media issue according to my requirement using screen sequance (Reference screen) and field selection group ?

Hi,
These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
Regards,
Prasobh

Production order - change standard screen

Hi Gurus
Please advise.
User wants to use
Start Time (CAUFVD-GSUZP) and Finish Time (CAUFVD-GLUZP) on Production Order Creation screen (transaction CO01). In standard these fields are closed (only displayed as 24:00 for Finish time and 00:00 for Start Time).
If we open these fields (change standard screen) and enter the values - what are the impacts?
Thank you.

Hi Oleg,
I wanted to know what the requirement of User so that you want to change the time mentioned in the order. Because this the time earlier and latest time suggested by the system.
Regards,
shailendra

Enhancing a standard screen

hi all,
I have a requirement where i have to add a field on screen of a standard transaction with effect on other fields.
Ex : In T-code ME21N, if i want to put a check box and if the check box is checked then an action should take place in runtime.
Or a field where document no can be inputed.
And there also a requirement where if the 'item category' or the column 'I' is filled as D,then it should give a pop-up.
which badi should i use for this case.
regards,
Johnson

Hi,
Here is the procedure to implement screen exit.
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
the tcode is cmod...
1.From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
2.Choose Edit component.
3.Choose the screen exit and double click on it
4.Create your subscreen using the Screen Painter.
5.Design your screen to be added to the standard screen and activate the particular screen and return back to the flow logic .
6.Choose the PAI and PBO to write down the logic.
7.Generate your screen and choose Back (the green arrow) to return to the Project management transaction.
8.Go to the transaction ME22 to view the customer defined screen exit.
9.Enter the purchase order number and press Enter.
10.Go to the menu header --> Details.
11.Purchase number is visible on the standard screen
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
https://forums.sdn.sap.com/click.jspa?searchID=10843961&messageID=4640690
Regards
Kiran Sure

Configuring New QM notiffication from Standard (F2 and F3)

Hi Experts
I am configuring two new notification types in QM copying from standard types F2 and F3.
When I copy it is not copying all the screens and fields.
I have to manually copy all the screen and fields.
As far as I know when I copy from standard it copies all the linkages, screens and realtionship.
I remember doing that earlier.
One of the thing I notticed "Execution" tab was missing completely in new Notification type.
Do I need to do something else?
Appreciate your thoughts.
Gaurav

Dear
As far as i know you cannot copy all the screen ,tab to new notification type you have to manually do it yourself
you can copy the screen and tab within the notification only
regards
thyagarajan

Problem in translations for standard screen...

Hello All,
I got the access key for a standard screen and have added an item to the menu bar of the standard GUI status. Now I want to translate the same into different languages. But when I tried the same by clicking GO TO , the translation option has been disabled. How to acheive this?
Any pointers to this are highly appreciated..
Thanks & regards,
Prakash Ghantasala

Hello Prakash,
Please try going to SE63. Give your program name there, select the language to be translated to. And translate it.
Johnson

How to remove Trip schema dialog box and default it in tcode PR05.

Hi all,
In Travel Expense Manager(PR05) when we create a travel expense a popup will appear where we need to select the trip schema from the dropdown. Here i need to remove the popup and make one trip schema as default. Is it possible through config or need to enhance it.
Let me know some idea on this.
Thanks and regards,
Arun.
Edited by: Arun Kumaran on Jun 21, 2010 1:55 PM

Hi,
If you want to make the trip schema as default to the travel type, you can do it in define schema & individual field control. But still the pop will come to select the trip schema and if you donu2019t want the step to be performed by employee.
Then you need to hardcore it by defaulting trip schema to trip activity type application.
Hope this helps.
Regards,
S.Srikanth

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Adding a field to a table control of a standard screen

Hi,
I need to add a field to a table control of a standard screen (Transaction CAT2).
Could anybody please tell me how i could go about doing this?
Also, what customization would be required to display the field because there are way too many fields and only a few are being displyed as of now.
I will get the access(SSCR) key to modify the screen.
Regards,
Monica.

Hi Monica,
Did you name you customer field also "FIELD1_W", because the field should get updated then without any modification as in screen 2100 a "move-corresponding" is performed from CATSDB to these fields.
Regards,
John.

FI-TV Modification of standard screens and fields in Trip Scheme

Similar Messages

Maybe you are looking for