FI Validation transportion problem

Dear Experts,
hi hv created a FI validation using ggb0 and modified the view D_80D accordingly. Every thing is working fine in development and quality client.
but not working in production client.
can any one help , wher i gone wrong????
Regards,
jaspal

Try generating vals and sub using RGUGBR00 program in prodction if you dont see any issue with transport.

Similar Messages

SPP Error - No valid transportation lane between Supplier and LOC1

Hi
While running the EOQ and SFT planning service, we get the following error
"No valid transportation lane between Supplier and LOC1". LOC1 is the entry location for our BOD.
We have not created any procurement relationships as we are working on a standalone SCM trialbox.
Appreciate any help/suggestions to resolve this issue.
Thanks & Best Regds
Mitesh

Hi Mitesh,
You need to have valid transportation lanes from the supplier. Maintain it manually. If I remember correctly it is possible to have External Procurement Relationships in APO only (type 4) and not just contracts, purchasing inforecords or scheduling agreements CIFed from ECC.
Hope this helps.
Thanks,
Somnath

Validations transport request

Hi All
I have created a validation, but I didn't got the transport request no.
Please let me know how to transfer the transport the validation or how to create the transport reqest for my validation.
Best regards
Madhavi

Hi
Keep the cursor on validation you created (Not on step ,validation may have number of steps ex:-step 001 ,step 002 etc..) and from the menu select Validation-> Transport. Select all the check boxes and execute.Then it will prompt for new Request creation.
After creating the Request go to SE09 to move the same to Quality server.Once it is moved to Quality Run the program RGUGBR00 to generate the ABAP Code for validation in Quality.The same need to be done in Production also.
Also i can say you , we can generate a transport request no. for the validation only but not for step.
So the same transport number will be valid for all the steps in the validation.
Hence we cant create a transport request no. for a step.
Regards
Venkat
Edited by: Venkat Dara on Dec 3, 2008 5:39 PM

Transformation transport problems when containing routine

Hi Gurus,
I'm facing a transport problem.
When i want to transport a transformation that contains routines, the transport says syntax error in routine. The routine in DEV is tested and correct. I realised, that the transport does not bring the routines. After transport, i open the transformation, and the routines contain the default routine: RESULT = .
I found some answers in some posts, but no exact answer how can i get rid of this transport problem. I don't like copy - paste into prod system with manually editing....
If you have any idea, please let me know.
Thanks
Laszlo

Thanks for your help, it worked now, but i think it should work without owerwrite originals. Sometimes it seems that the routines is not included in the transport request, when i modify a routine in a transformation.
But thanks anyway, problem solved now

Open Hub transporting problems

Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've looked at all the SAP Notes, but they reffer to the earlier patch levels...
And other problem, is that it's OK in DEV system but in QUALITY system, when you launch a DTP it gives us a dumb with ASSIGN_TYPE_ERROR
Any ideas??

My destination path on the DEV box is simply the following (identified by BID in the following path):
D:\usr\sap\BID\DVEBMGS00\work
And when I locate the un-activated open hub on the QA box, the BID is already changed to BIQ, but the server name box/field is empty....
I am going to try with the object changebility option, btw, is there any documentation on how to change these objects that are marked with object changebility on the QA box (provided that we can not manually change anything on the QA box)...
Anyways, I think my problem is with the server name conversion from "abc-bi-dev" to "abc-bi-qa"....!!!
Also, please note the RSBFILE entry for this object in the QA box has the "btcsrvname" as blank...
Do you think there is any additional setting that needs to be done on the QA box to do this translation (from "abc-bi-dev" to "abc-bi-qa")?
The only two setup we have done as far as the BI is concerned is at the "Tools-> Conversion of logical system name"....where you only put the conversion for client name mapping from dev to qa and local file system mapping from dev to qa.
So, is there anything else to map the host name (from "abc-bi-dev" to "abc-bi-qa") either at BI perspective or Basis/NetWeaver perspective?
Thanks a lot...
~Sabuj.
Edited by: Sabuj Haque on Feb 1, 2009 1:11 PM
Edited by: Sabuj Haque on Feb 1, 2009 5:34 PM

The Object cannot not be processed due to a transport problem

We are trying to delete a standard web template 0ADHOC_TABLE (modified by our coworker before and transported) and reinstall a new one or totally standard one, but when clicking the "X" icon to delete this web template, get the following error:
"The Object cannot not be processed due to a transport problem"
What could be the reason?
Thanks

Hi Kevin,
This message coms up because as you mention, the template has been transported. Since it is in the target system, if you delete form the dev system, the system needs to ensure that it is also removed from the system it has been transported too.
You can check the dev package assigned to the template, assign a new request against this dev class (RSA1 > Transport Connection > Bex Truck icon). Log out and log back into WAD and try to delete it, and then send this transport. Or you can simply reinstall it as Roberto suggests.
Hope this helps...

Validation Transport

i have created validation and now i want to transport it to PRD and i follow
Menu>Validation>Transport
and i got the below Screen here i want to know which one i have to Select the BOX
logical Rule
transport sets
Message
Message Class
Boolean Class
tell me the process clearly

T-code GGB0, position the cursor on the validation you have to transport and in the menu choose "Validation / transport".
A new screen appears, with the selected validation name and all validation information flagged that can be transported (Its up to you which you are choosing) you can leave all boxes checked.
If you tick "execute" enter a workbench request number/create a new one, tick "enter" the objetcs to be transported are included in the transport request.

Use GLC-T to connect ucs 6120 and 2960s (RJ45),.have SFP validation failed problem

hi,every .
i use GLC-T to connect ucs 6120 and cisco2960s (RJ45),.have sfp validation failed problem.
I have done speed to 1G then I am getting error " link not connected" even I have connected the nnetwork cable..

UCS6120-A(nxos)# show interface e1/7
Ethernet1/7 is down (SFP validation failed)
Hardware: 1000/10000 Ethernet, address: 0005.73d2.934e (bia 0005.73d2.934e)
Description: U: Uplink
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits c, 0 bytes c, 0 packets c
30 seconds output rate 0 bits c, 0 bytes c, 0 packets c
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
0 unicast packets 0 multicast packets 0 broadcast packets
0 input packets 0 bytes
--More--

TRANSPORTING PROBLEMS

Hi Experts,
Good day!
I am transporting custom icludes IN EANL table, while Importing to QA I am getting error as follows.
Error -911-SQL0911N The current transaction has been ro when executing ADD-FIELD of
Error 68 when executing ADD-FIELD of in DDL statement f
Error EANL when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of EANL
Error in DDL statement for when executing ADD-FIELD of
Error when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of V_EANL
SQL error -204 occurred at location V_EANL0 (object ) - IGNORED
SQL error - IGNORED occurred at location (object ) - IGNORED
SQL0204N is an undefined name. SQLSTATE=42704 (dummy, do not translate)
(dummy, do not translate)
07:00:40: Retcode 1: error in DDL statement for V_EANL0 - repeat
Error -206-SQL0206N when executing ADD-FIELD of is not valid in the conte
Error in DDL statement for when executing ADD-FIELD of
Please advise me.
Regards,
Surya.R

Surya,
I would have to say that you missed a transport along the way that made other changes to the table which cannot be seen at this time. If that is not the problem, then you should check your /usr/sap/trans and verify Data and Cofiles are where they need to be. If that is still not helping, you really need to open an OSS Note with Customer Support as your Development System is improperly creating transports for one reason or another.
Thanks and if this answers your question, please set this thread to answered.

Multiprovider transport problem

Hello Friends ,
While transporting the multiprovider from BW Development to BW Testing system I am getting following error in the Log display of BW Testing System,
R3TRMPRO***(Multiprovider name) was repaired in this system.
The log display for the Delevelopment system shows messages 'Feedback after export or import'--'Successfully Completed'
But the problem occurs in BW Testing system ,
and we are getting the above error message ,
Import--(8) Ended with errors
please suggest solution .
Thanks in advance.

Hello A.H.P ,
Thanks for valuable suggestion.
I think someone has directly repair this multiprovider in Testing system.
I will do the required steps as suggested by you.
Agains thanks very much .
Message was edited by: Amol Kulkarni

Project does not contain a valid connection problem

I am using JDeveloper 10.1.3.2.0 and have checked out code that was in CVS. I tried to put the code under an Application and Project, but when I do the check out, the Application Navigator shows it at the Application level. Within that Application, there are two projects. When I do a Make on either project, I get the error that The Business Component Project does not contain a valid connection. Double clicking on the error send me to the corresponding .jpx file which contains this:
<?xml version='1.0' encoding='ISO-8859-1' ?>
<!DOCTYPE JboProject SYSTEM "jbo_03_01.dtd">
<JboProject
Name="ViewController"
SeparateXMLFiles="true"
PackageName="" >
<DesignTime>
<Attr Name="_ejbPackage" Value="false" />
<Attr Name="_NamedConnection" Value="Fred" />
<Attr Name="_version" Value="10.1.3.36.73" />
<Attr Name="_jprName" Value="../ViewController.jpr" />
</DesignTime>
</JboProject>
Does anyone know what connection needs to be set up? I wonder if part of the problem is how the CVS check out is working, but I can't seem to get it under an application.
I'd appreciate any help!

Hello.,
Thank you so much for the responses! That was the problem. I had defined a database connection, but the name was not the same as what was in the jpx file. The error is now gone. :)
Thanks again!

Error executing a query (validity interval problem in variable)

Hi all,
I have an issue in a query.
While executing the query i am getting following error
"THE VALIDITY INTERVAL HAS THE INITIAL VALUE AS LOWER LIMIT"
There are two CALMONTH variables that are being used in the query and are also used as selection variables
1) interval characteristic mandatory variable
2) single value characteristic mandatory variable
Please suggest me what might be the problem.
Any suggestions are welcome.
Thanks
Mudit

Hello,
I tried debugging my query in RSRT and i have found a possible reason for that.
My query was built on a multiprovider in which data was not loaded in one of the cube.Since no request was loaded in the infocube initial fields of all time characteristics were empty which was the reason for the error.
Thanks once again for your valuable inputs.
Mudit

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Query Transportation Problem?

Hi Guru's,
We are working in Bw 3.5 Version
Query: We have observed that there was a problem with Query in Dev & Quality Server?
as per the regular activities we have modeled the entire process in Dev
from data Source to Data target
then we have developed a report on this data target.
all this was saved under one Request and transported to Quality.
then there was some modifications in update rules & and also in Bex report
for this also we have sent under one request to Quality
there we have observed that the modifications in update rules have been applied
& in report this modifications did nnot apply in Quality server
Can any one help in this ............
advance thanks ,very very urgent..
Points will be rewarded >
Hari

Hi,
I have the same problem. I have a query in production and I need to change it. I changed it in dev, transported the query with no error, but I don't see the changes in prod.
There is any configuration error? Normal transports work fine.
Thanks

Transportation problem in Dev system

Hello All,
I am getting the problem in Transportation. While i am transporting the request from Dev to Quality, the problem is comming in Export. please see the bellow error messages.
Exports with Errors       No Further Transport
    TBD TB Development
            TBD        TB Development
                       Pre-Export Methods                       29.12.2008 13:00:01    (0) Successfully Completed
                       Export                                   30.12.2008 08:47:19 In process: Requires update
                Import steps not specific to transport request
in the log bellow messages are displaying.
   [dev trc     ,00000] Mon Dec 29 13:00:07 2008                          760684 0.760684
   [dev trc     ,00000] Disconnecting from ALL connections:                   10 0.760694
   [dev trc     ,00000] Disconnecting from connection 0 ...                   26 0.760720
   [dev trc     ,00000] Now I'm disconnected from SAP DB                    2370 0.763090
   [dev trc     ,00000] Disconnected from connection 0                        14 0.763104
   [dev trc     ,00000] statistics db_con_commit (com_total=2, com_tx=2)
                                                                                13 0.763117
   [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                13 0.763130
Disconnected from database.
End of Transport (0000).
date&time: 29.12.2008 - 13:00:07
Please let me know the solution for the above issue, i will assign full points.
Regards
KK

Hi,
Your Error statement COMMIT shows that the sytem has submittted the request to make connection with the system.
But it immediately gives CON_ROLLBACK (statement) error, which generally happens, there is not enough space in your quality system. therefore the Rollback of the submitted request happens.
Check the DB space in ur Qual system and speak to your BASIS team, so that it can increase the DB size and also, u can urself clean the system.

FI Validation transportion problem

Similar Messages

Maybe you are looking for