FI12 : Transport order

Hi,
i do some modifications on bank houses and bank accounts in FI12, but when i transport the order from the developpement for the quality environment, i find all of these modifications except names of house bank.
please is there any other way to transport the house bank's names ?
Regards

Hi.
In development system maintain again the descriptions.
Don't forget to go to translation to maintain them in all used languages.
Then transport again the changes,
Pls assign points if this is helpful.

Similar Messages

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Tables for delivery and stock transport orders

Hi Members,
I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
I don't know which tables these quantities sit into.
If you know please help.
Points will be suitably rewarded.
Reagrds,
Boby

>
Boby wrote:
> Hi Members,
>
> I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
> I don't know which tables these quantities sit into.
> If you know please help.
> Points will be suitably rewarded.
>
> Reagrds,
> Boby
if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

Commercial Invoice and Stock Transport Order

Hello Experts,
My client is using stock transport orders which sometimes results in cross border goods movement. I am not able to find any functionality for creating commercial invoices to be used for these types of shipping.
Any ideas?
rgds
GAR

Hi Gar,
Usually when there is a crossing of borders, it is a movement between 2 different companies code, therefore the intercompany purchase is the usual flow.
If you mean that the flow is between plants of the same company code between different countries, maybe you are talking about "Plants abroad" functionality.
http://help.sap.com/saphelp_45b/helpdata/en/34/60b1a0ae724effe10000009b38f91f/content.htm
Previously, the plants of a company code had to belong to the country of that company code.
As of Release 4.0A, it is possible to deviate from this rule for European company codes with European plants.
I never had to use this functionality at a customer site, but that sounds like your requirement
Also allows internal billing document for intrastat reporting, so feel free to evaluate!
Best Regards
Franck Lumpe
Freelance SAP Consultant

Report with transport order status

Hi,
I need to make a report / query that shows me which transport orders have been transported to the Quality System, which to the Production System, RC, Dates of imports ...
Does someone know which tables do I need to access.
In fact, does someone have a similar report?
Thanks in advance.
F

Hello Anji,
thanks for the answer. However, I am a little bit lost: using E70 table I am able to know which TO´s have been imported to Quality, but not to the Production System.
Is there another table that gives me info about transports to the production system?
Thanks in advance,
F

Minimum order qty for Stock transport orders

Hello
I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
Minimum order qty
Minimum delivery qty
Delivery unit
As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
Thanks,
OT

Hello
We are in an intracompany business case. The supplying and recieving plant are in the same company.
The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
So far I have not found any way to do this. Any ideas are greatfully received.
BR,
OT

Table to See Stock Transport Order Partners

Hi All.
What table can I see the partners defined in a Stock Transport Order?
I've realized that VBPA is just for sales order documents.
Thanks,
Jim

Hi,
Select the PO's from the EKKO table of DOCU type "UB" which is STO's
Then Select the parters from the EKPA table for the entries of the selected EKKO Po's
Reward Points if it is Useful.
Thanks,
Manjunath MS

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

How can I create a new Transport Order from WD UI?

Hi experts,
the idea is to give the user in WebDynpro the chance to create a transport order with data from a table from the data dictionary.
The same function is implemented in the standard SAP transaction se11. When you see the data from the data dictionary table you have the chance to transport the selected entries in a transport order, after entering the main transport data like ordername and description in a popup.
Is there a way to create this function from a WebDynpro User Interface?
Thx for all answers.
Dirk

Hi,
Check this thread -
[Write transport request from WebDynpro|Write transport request from WebDynpro]
Regards
Manas Dua

Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218
4       6000038321 000010 Only 0 ST of material F784100 available
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000020 Only 0 ST of material F784100 available
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000030 Only 0 ST of material F784100 available
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Inter - Company Stock Transport Order Issue

MM SAP Gurus,
When I try working on "inter company stock transport order between two company codes."
I found the errors while creating PO(using document type UB)
ie.
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
i couldnt find out the error................................
Here is the configuration done by me......
Company codes:c1,c2
Plant for c1:p1
Plant for c2:p2
I m going to create and transfer stock from p2 to p1.
Here i m using stock transport order with billing(SD)
Purchase org for c1:porg1
Vendor for c1,porg1:v1
I assigned plant p2 in additional purchase data of vendor v1.
Sales area for c2:sorg2,ds2,d2
Customer for sales area(sorg1,ds1,d1):cust1
Now i go to mm->purchasing->purchase order->setup for stock transport order
> for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
> delivery type for supplying plant:NLCC
>checking rule RP.
i assigned doc.type UB into receiving plant p1 and supplying plant p2.
Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
I already maintained all this.
The doc type NB also I tried ,,,,,,,but same errors r being shown.
Also where to create the inter company a/cs for billing?
Please check the attached file for the error and let me know.
Thanks & Regards
Keerthi ...

Business partner
● Vendor master u2013 supplying plant
Create the vendor for the purchasing organization of the receiving plant.
Assign the vendor to the supplying plant in the vendor master record.
From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
● Customer master u2013 receiving plant
Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
The above is from help.SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Plz check this link for tht information.
So, basing on this: I have customer 1 and vendor 1 for CC1......
--> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
--> Vendor 1 is assigned to the supplying plant in the vendor master.
--> My question for u is:
1) In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
Material exists in both the plants P1 and P2.......right?????
2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
Please clarify these things.....
You will be appreciated and rewarded too.
Thanks
Keerthi

Commitment Item error in Stock transport order

Hi all
I have a stock transport order (STO) for a material non valuated in both sending and receiving plants.
While creation , there is an error with respect to completion of an "committment item" *.
If I input the committment item in STO create transaction in R3 , the STO is saved (permitting blank account assignment for the STO item as intended) and there is no further issue till post goods issue in sending plant or GR in receiving plant.
The problem is however that this STO is triggered from APO and transferred via CIF to R3 while there is no chance to input the commitment item. This results into a CIF error with the STO not created in both R3 and APO.
Is there a way I could bypass this "committment stuff" in this situation?
Thanks in advance
Anton
*The exact error message is as follows;
" No commitment item entered in item 00001 plant < >
Message no. FI311
Diagnosis
The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
Procedure
Enter a commitment item.
If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element. "

Hi,
Did you try using derivation rule using FMDERIVE in case funds management is active.
Please also refer to the link below which guides on the item category to be assigned in Commitment item.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f0/ca5716260211d28a430000e829fbbd/frameset.htm
Regards
K.R

Error when releasing a transportation order

Good morning.
I am trying to release a transportation order that contains a nonstandard table which has been added two fields, and the corresponding data elements and dominions of the new fields.
When releasing the order, dumps an error and cancels the export.
The status of the order now is "Initiated liberation".
The error code is:
"Error SQL 932 when accesing SPROXDAT: ORA-00932: inconsistent datatypes: expected %s got." And makes reference to data elements, but i think they are OK.
Please, ¿someone can help me?
Thanks a lot.
Regards.

well the problem is very likeley that the table has enhancement options which allow only character and NUMC append fields.
you most probably violated those preferences.

Valuation type in case of stock transport order

Hi,
We are spilt valuation.
now we are doing stock transport order and it is asking for valuation type. while we dont want to enter valuation type in STO.
as which material is to sent to plant, we know at that time of delivery.
but during making STO system is asking for 'enter valuation type'.
How we can do the same.
Regards,
Santosh

Hi,
Since you have activated the split valuation for the material system is asking to enter the valuation type.
Check the material master Accounting 1 view whether you have maintained valuation category?
If you want Split valuation, maintain the valuation type in config settings in IMG & extend the material to the respective valuation type.
Hope it helps.
Thanks & Regards,

Impact of different division on Stock Transport Order

We have a situation where we have one plant with one customer number, but we have 2 business areas of material going through it. Example: The material exists in divison 10 business area 15. The customer is configured to business area 15. No problem here. But we also have material in division 10 business area 13. The financial postings are correct, as the material comes out of 13 and goes into 13 on the receiving end, however on the stock transport order, it will show 10/15. What is the impact of this? Will it affect reports? Do we need a separate plant for 10/13? The configuration will not work with the business area blank.
Please advise. Thank you.

Hi
A product or service is always assigned to just one division. From the point of view of sales and distribution, the use of divisions lets you organize your sales structure around groups of similar products or product lines. This allows the people in a division who process orders and service customers to specialize within a manageable area of expertise.
The system uses divisions to determine the sales areas and the business areas for a material, product, or service.
So by changing division you are changing business area also. And you have cross and vertical reports business area wise and division wise. So standard report will not go wrong.
regards
Antony

FI12 : Transport order

Similar Messages

Maybe you are looking for