Fiber Cable to interface between Xenpax-10gb-lr++ and sfp-10g-sr=

I'm extending our network via 10gb fiber to the another building.  The 6509E has the XENPAK-10GGB-LR+= which is rated for SMF, 1310-nm wavelength, with SC duplex connector.  The other end 4500X has an SFP-10G-SR= that is rated for MMF, 850-nm wavelength with LC duplex connector.  Between both sites there will be a SMF cable via G.652 (1310-1550nm) which will be terminated at both end via ST connectors in there respective Fiber distribution boxes.  Question, since the SFP-10G-SR= that is ONLY rated for MMF 850-nm wavelength, will this pose any issue?  Can you give suggestions on what type patch cables to use?  Thanks

"Between both sites there will be a SMF cable via G.652 (1310-1550nm) which will be terminated at both end via ST connectors in there respective Fiber distribution boxes"
Since you have G 652 SMF you can't use SFP-10G-SR MMF as other's wrote earlier. You need to buy new  1310 SFP i.e you neeed
Cisco SFP-10G-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
For 4500X you need  you need LC-ST patch cable. 

Similar Messages

  • Fiber Patch cord bewteen X2-10GB-SR and SFP-10G-SR

    I would like to know which patch cord should I be using between X2-10GB-SR and SFP-10G-SR. The mention of part no would be very helpful.
    Thank You

    CSCO11584685 wrote:dude, double check before you answer.according to http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.htmlX2-10GB-SR has SC connector, and the SFP-10G-SR has LC connector. so that would require SC-LC connecitor with MMF, 850-nm wavelength.
    Thanks Sulaiman for the correction. I should not have relied purely on memory as it has potential of failing :-).
    Atif

  • How is the interface between the Java Stack and ABAP stack is achieved?

    How is the interface between the Java Stack and ABAP stack is achieved?..Please send me the answer to [email protected]

    Hi,
    By interface, I assume you mean the connection between the ABAP and the Java stacks in a double stack system.
    The connection from Java to ABAP is through JCo connections defined in the WebDynpro section of the J2EE start page. So Java to ABAP requests are processed through JCo.
    The connection from ABAP to Java is through RFC connections defined in TA SM59. The ABAP to Java requests are processed through RFC.
    Refer https://dsd.esco-salt.com/StartPage/documents/integration/3.html for detailed explanation.
    The UME can be maintained in either ABAP or in JAVA depending on the persistence.
    Refer: http://help.sap.com/saphelp_nw70/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm
    Check UME data source configuration.
    Some quick FAQs can be found at:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad47eb90-0201-0010-7cb2-ddfa5ed879ec
    Hope this helps.
    Best Regards,
    Srividya.R

  • Interface between self registration form and prospects

    Hi all,
    I am defining the interfaces between the Self registration form and the prospect in the supplier registration. Does anybody know how the data are tranfered into the prospects? How can the purchaser acceed to these informations to give his approval?
    Once this step is over the supplier will answer to a survey (questionnaire). Where are stored the answers? Are these data visible?
    Thanks in advance

    Hi,
    Per my knowledge, the code should be pasted in CustomLogin.aspx.cs page.
    Chun Liu has also written an blog about the custom login page for FBA, you can have a look at it.
    http://blogs.msdn.com/b/chunliu/archive/2010/08/21/creating-a-custom-login-page-for-fba-in-sharepoint-2010.aspx
    More reference:
    http://blogs.msdn.com/b/kaevans/archive/2010/07/09/creating-a-custom-login-page-for-sharepoint-2010.aspx
    http://sivarajan.me/post/SharePoint-2013-Enabling-Custom-Login-Page-and-Mixed-Contents-Part-2
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Is is possible to use a netgear wireless router to share a cable internet connection between an airport express and a Sony BD player?

    Hi,
    I have a couple of netgear wireless routers (WGR614, WPN824 v3) as well as a Belkin wireless router (F5D8233-4v3) lying around, and was wondering if it is possible to use any of these to share the internet feed from a cable modem to both an airport express and a Sony Blu-Ray Player?  I connected the WPN824 router between the cable modem and the airport express but the airport express will only give an orange light then as if it does not have internet access.  Any suggestions would be much appreciated! Many thanks.

    What you are basically attempting to do is extend the Belkin router with the AirPort Express Base Station (AX) via a wireless connection between them. This method is known as a Wireless Distribution System (WDS). Unfortunately, WDS is not a standard and router manufacturers implemented, in most part, to only work with their products ... so it will be very unlikely that you can create a WDS between your Belkin and the AX. There have been a few Belkin model that have been updated by third-party firmware that support WDS, but the models you listed are not any of them.

  • X2-10GB-LRM to SFP-10G-SR= Compatibility

    Hi,
    Can you help me in this ?
    I have two 10Gig modules.
    On 6500, i have X2-10GB-LRM  and on 3750-x i have SFP-10G-SR= .
    you can use it with fiber cable and patch cord to connect the two devices?
    thanks

    Hello,
    SFP-10G-SR is a MMF and it uses a LC duplex connector.
    X2-10GB-LRM is also a MMF and it uses LC duplex connector.
    so they are compatible.
    Link
    Under 6xxx series switches you will both transceivers as part of the supported devices.
    http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matri/OL_6974.html#wp99798
    Under 3xxx series switches:
    http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matri/OL_6974.html#wp48759
    Link for 10GBASE X2 modules:
    http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6574/product_data_sheet0900aecd801f92aa.html
    10 transceiver modules compatibility matrix:
    http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html
    Look for Table 1 10-Gigabit Ethernet Transceiver Module Models
    Thank,
    Haihua

  • Interface between ESS front end and  BAPI'S

    Hi,
    Can anyone tell me how the field mapping is done between ESS portal frontend to the corresponding field in BAPI FUNCTION MODULE.How it will call BAPI and return the value tothe front end.
    Thanks,
    Deepthi.

    check this Floor plan Manager http://help.sap.com/saphelp_erp2005/helpdata/en/b4/139525380149a49c8402e22700e4ba/frameset.htm .this is
    the architecture on which every application is built in ESS.
    it is having three components
    1.Business Component-which interacts with the backend
    2.Visual Component---front end display
    3.Configuration component--talks about component
    Model will be created in the Business component that interacts with the backend and fetches the data.
    check this link to know more about adaptive RFC model used to interact with the backend
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15
    reward points if helpful

  • How to make an interface between user  created  screen and dxtools table

    Hi friends,
                   I created  my own selection-screen using module pool .I need help about how to join my screen to
    the fields of  DXTOOLS  TABLE .
    This DXTOOLS is a function module for FILE UPLOAD/DOWNLOAD in SAP.
    ie. i have  joined the screens
                      1. OBJECT, PROGRAM TYPE,PROGRAM NAME SCREEN and
                      after clickin COPY BUTTON a screen with these fields appear...
                      2.TARGET/SOURCE - APPLICAITON SERVER,PRESENTATION SERVER..   
    please  help me  about how to join my screen with the table DXTOOLS..
    Thanks,
    Kassim.

    I would try catch block code with [Alert.setCommandListener|http://java.sun.com/javame/reference/apis/jsr118/javax/microedition/lcdui/Alert.html#setCommandListener(javax.microedition.lcdui.CommandListener)], roughly like below:
      downloadAlert2 = new Alert("Download error !");
      downloadAlert2.setType(AlertType.ERROR);
      downloadAlert2.setString("Download error : "+e.toString())
      downloadAlert2.setTimeout(Alert.FOREVER);
      downloadAlert2.setCommandListener(new CommandListener() {
        public void commandAction(Command c, Displayable d) {
          if (c == Alert.DISMISS_COMMAND) {
            midlet.platformRequest(downloadURL);
            midlet.notifyDestroyed();
      display.setCurrent(downloadAlert2);//show the Alert  
    }

  • Difference between OWB 11g OBE and OWB 10g: Implementation Part I?

    I am planning to attend oracle OWB class Oracle Warehouse Builder 10g: Implementation Part I (Data Warehousing and Oracle Business Intelligence) through Oracle University http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?redir_type=13&group_id=1343&p_org_id=1001&lang=US&media=1&source_call=?
    Has anyone already taken the class and tell the difference between the class and owb 11g oracle by examples in http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html?
    If there is not much difference, I woukd like to learn it by myself through Oracle OWB 11g OBE.
    Thanks in advance. WS

    If you seriously intend to take up OWB as your career path then i would advise you to go to Oracle unversity and attend classes , if you are going to use owb only for a project/small works then use Oracle by example.
    Further to this if you company is sponsoring you then take oracle unversity course as "every little helps" and its never too bad to learn something the right way.
    Its like making a choice whether to learnmusic form the web(online) or going to a music teacher and learning music. I would prefer the second approach.

  • Portability between Designer 9i r2 and Designer 10g r2, and deployment?

    I have some questions to ask...
    I have been given the job of adding Oracle to the reportoire of databases available to be used for a commercial Delphi application. The idea is to create a database in 10g that this application can talk to.
    I wish to develop the database, constraints and triggers etc using Oracle Designer (not because I think it's best, but simply I know how to use it, and don't know JDeveloper yet, and time is of the essence).
    Here's where the problem lies: The last application I developed was on 9i r2 and was going to a 9i r2 platform, and I generated DDL for the database tables stuff, and also for the table API, ending up with two sets of script files to run on the target system. Two of the lines of code in the table API script were:
    @ C:\oracle\9iDSHome\cgens72\sql\cdsaper.PKS
    @ C:\oracle\9iDSHome\cgens72\sql\cdsaper.PKB
    Of course the pathnames weren't right, but when I fixed them I managed to get the system installed correctly. However the clients for the application I am working on now should not have to have developer installed... I want them to be able to just run the script files into a 10g database and not worry about designer/developer at all.
    The other issue is just as serious. Although clients shouldn't have to have designer installed, I want the application developer/company owner to be able to fiddle with the designer if he wants to. I have 9i where I work, and he will have 10g. Will I be able to do a repository export/dump from my 9i r2 and import it to his 10g r2? With the previous project I did, I couldn't even import the designer export from my 9i r2 to the 9i r2 at the workplace... it said "Incorrect header file" - it was lucky I had the DDL script files or I would never have got it in the database at all! If they had had a different version of oracle then I don't know what would have happened when trying to run those package files from developer (the comments say something about an error package or some such)!
    Eventually I'm going to upgrade to 10g for database development but I don't want to just yet.
    So my questions are:
    1. Can I develop the system using 9i r2 DB and 9i r2 DS and then create DDL scripts to be run on 10g client databases without having to have developer installed on the client machines? could my "boss" distribute those two developer package files with the DDL scripts to the clients without breaking some kind of copyright?
    2. Will I be able to import a Designer 9i r2 export into a Designer 10g r2 repository for my "boss" to make adjustments and produce refined DDL scripts himself later on?
    If the only thing holding me back is having 10g installed where I work then tell me now and I'll take the plunge. If there's other issues I need to find a way around them.
    I thank you in advance for any advice you can give
    Thanks
    Adam Sawyer

    Hi,
    This issue has been reported with Designer Releases prior to 9.0.4.4 against 10g database.
    Please upgrade to the latest Designer Release 9.0.4.5 the import will work fine.
    HTH,
    Wilson.

  • Do I need an audio interface between my roland keyboard, garage band/MAC and Alesis 8.0multitrack mixer, or should I go direct into the USB of the Alesis with my keyboard into the mixer?

    Do I need an audio interface between my roland keyboard and alesis 8.0 multitrack mixer when interfacing with Garage Band? Or can I just go direct USB MAC into the Alesis Mixer with keyboard directly into the Mixer? ie, is the interface overkill?

    First of all the Alesis 8.0 is a usb audio interface so you already have a interface. Next you could go from the Roland into the Alesis into the Mac. You could also go from the Roland headphone or line out into the Mac Pro audio input. And depending on what Roland keyboard you have, you may be able to use Midi (usb) and use the Macs Midi voices.

  • Scenario for interface between a non sap system and a SAP erp

    Hello,
    I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
       -  At first regarding the interface from the non sap system and a SAP ERP :
           the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
    And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database  with a flag that means that the records have been sent to the SAP erp.
       -   Regarding the interface SAP erp to non SAP system:
           the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
    Is this scenario possible ?
    Do we need any adaptator between the non sap system and the XI ?
    Thank you for your help
    Christophe

    Hi Bontron,
    Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
    Scenario1:   Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
    Scenrio2:  Pickup form Database tables  (Jdbc Adapter) -- xi -- RFC Adapter  ---> This is synchronous call.
    Regarding the interface SAP erp to non SAP system
    You can send idoc to xi and from there use File adapter to send to the receiving system.
    These blogs may help you to some extent:
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario   (your scenario will be opposite to this)
    Regards,
    ---Satish

  • Features and Difference between Oracle 7i,8i and 9i

    Hi All,
    Please let me know the features and difference between Oracle 7i,8i and 9i,10g.
    and New features in Oracle 11g.
    Thank you,

    Each release has a New Features Guide:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28279/chapter1.htm

  • Difference between oracle 9i Rac and 10g Rac

    Friends -
    Could you please list out what are the main differences between oracle 9i Rac and oracle 10g Rac
    Appreciate your support on this
    Regards
    satish

    hi
    check the new features document of 10g RAC
    http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/whatsnew.htm#sthref6
    HTH

  • Difference between oracle 9i dba and 10g dba

    Hi friends
    Please let me know the major difference between oracle 9i dba and oracle 10g dba
    thanks

    new features of oracle 10g
    http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10750/toc.htm
    http://www.oracle-base.com/articles/10g/Articles10g.php
    http://www.orafaq.com/faq/features_introduced_in_the_various_server_releases

Maybe you are looking for