Fiber date removed completley from BT Openreach af...

Well for months I was with Digital Region on nice Fiber network getting 40Mps until it got shut down. BT then posted a date on their OPEN Reach whole sale site and BT own site with a date. It got moved a few times which is about expected but now there is no date what so ever and no mention of it coming on the Openreach wholesale site.
http://www.dslchecker.bt.com/
This is so annoying as the fiber cabinet I used on digitregion is right next to their old copper cabinet. So I am now stuck with less then 1Mbps.
This all happened after the announcement that they will be taking over the digital region stuff. I just find it very bad form that every mention of it has now gone.
I just find this all stupid as all the infrastucture is there but BT are messing around.

Yeah, I see what you mean. Using the Full Address checker http://dslchecker.bt.com/adsl/ADSLChecker.AddressOutput I get
BT BROADBAND AVAILABILITY CHECKER
Address 1 some road, somewhere in ROTHERHAM, S** 5** on Exchange WOODHOUSE is served by Cabinet 29
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 1
1 to 3.5
Available
ADSL Max
Up to 1
0.75 to 2.5
Available
WBC Fixed Rate
0.5
Available
Fixed Rate
0.5
Available
Other Offerings
Copper Multicast
Available
FTTC is currently not available on this cabinet due to following reasons:- At this time we cant provide a delivery date for this cabinet..
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

My ipad was stolen tonight and i accidently removed it from icloud while trying to erase data from it. it is a wi-fi only and was not online. can i remotely turn it back on to icloud?

My ipad was stolen tonight and I accidently removed it from Icloud while trying to erase the data. Is there any way to remotley restore Icloud? Or am I just out of luck?

If they turn off iCloud in settings, is it a lost cause? My bad for not having it secured with password. Thanks for the help. I'm exhausted and going to bed in a few. Five hundred miles from home on bussines trip. Flying home in the morning. sitting in hotel loby trying to figure this out. thanks again

WCF Data services remove miliseconds from DateTime when expand

I get some strange behavior, when using WCF Data Services 5.6. In my case, I have table, with 1 column set with Concurrency=Fixed, and this column hold date time field from database, updated each time when row is edited. In case I just retrieve entity -
this column has correct value with milliseconds. But if I do mapping - milliseconds are removed.
Here is a issue at glance :
====================================================================
void Main()
var b = from p in TABLE1 where p.ID == 100 select p;
b.Dump();
Request in this case is : Data.svc/TABLE1(100M) And data returned from service is :
<d:COL1 m:type="Edm.DateTime">2015-02-16T12:13:52.972</d:COL1>
====================================================================
As you can see , here time is returned with milliseconds - .972 In other case :
void Main()
var tmp = from p in TABLE1 where p.ID == 100 select
new TABLE1()
ID=p.ID,
COL1=p.COL1
var a1 = tmp.ToList();
a1.Dump();
Request in this case is : Data.svc/TABLE1(100M)?$select=ID,COL1
<d:COL1 m:type="Edm.DateTime">2015-02-16T12:13:52</d:COL1>
====================================================================
Time is returned without milliseconds.
Does anybody have same problem? May be its a bug in the WCF Data services or in the model?

Ok, seems like I found an answer to this, or at least way to avoid the problem.
First I traced generated SQL from framework, and I see that in first case, im getting SQL
SELECT ID, COL1 FROM TABLE1
and in second case, I got
SELECT ID, CAST( COL1 AS DATETIME) FROM TABLE1
which cause the problem.
Then I tried to update EF to version 6, WCF Data services to version 5.6.3,
Oracle ODP to latest one, tried to use Oracle managed driver... no any success.
Then I played little bit with table definition, and I saw that my col1 with type TIMESTAMP in database and DateTime in the model was defined as NOT NULL.
If I remove this from database definition, I got right value with milliseconds.
So , may be this is a bug in Oracle driver, but probably this is a bug in the WCF Data Services. At least I found a way to use concurrency in my case with this solution.

Removing zeros from data stream

Hi
I have incoming data (plz see attached diagram which shows the 2 states of the for loop '0' and default) which is a 1-D array of 64 bit real data .....it goes through the loop which removes zeros from the array.
As I have 3 elements in the 1-D array (call them x,y,z ), the loop works very well for all values of 'y' and 'z' .
However when x gets towards 1 and below say 10e-3 (it never is a negative number), the loop is rounding everything to 1 and then when the value gets between 1 and 0 (10e-3 for example) the loop leaves it out altogether and I just get y,z values saved.
Plz help me sort this out .
Cheers
Baz
Attachments:
zeros.PNG ‏25 KB
zeros.PNG ‏25 KB

If you want a tolerance comparison, try the attached VI. I rewrote it from one in vi.lib after an earlier post.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
CheckForEquality(DBL).vi ‏23 KB

Is there a way to remove the date and time from pictures?

Is there a way to remove the date and time from phoos in iPhoto?

Are you referring to the Date and Time some cameras put right on the image? If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
If your asking about some other date post back.
regards

How do I remove certain data being imported from a php file

I have data being loaded from a php into an xml class.
My host (which is free for testing purposes) keeps adding data to the php file which causes errors. I need to know how I can delete this extra text before I put the data into an XML class so I do not get the error. I did a trace of the data and this is what comes up below. I need everything below the </data> tag to be removed but do not know how to do this. Can someone please help me.
<?xml version='1.0' encoding='UTF-8'?><data>
    <google rate='21' />
    <yahoo rate='3' />
    <msn rate='2' />
    <tv rate='10' />
    <diger rate='4' />
</data>

<script type="text/javascript" src="http://analytics.hosting24.com/count.php"></script>
<noscript><a href="http://www.hosting24.com/"><img src="http://analytics.hosting24.com/count.php" alt="web hosting" /></a></noscript>

Thanks,
Jason

in your load complete function:
var s:String=e.target.data;
var xml:XML=XML(s.split("<!-- www.000")[0]));

The device is not with me. remove device from icloud account will enable new user to retrieve my data

The IOS device is not with me. By removing device from icloud account will enable new IOS device user to retrieve my data?

If you remove it from your account all of the data that is in the account will be removed from the iPad.

How can we remove items from the VF04 list?

We have a long list of items in VF04 that, for various reasons (some process related, some due to errors), are not to be billed. We have looked at applying filters to the list but there is nothing really suitable to hide these individual documents e.g. we could filter out some dates where none of the items on that date are to be billed but other dates have a mix of items we want to bill and others we don't.
I have done a search of this forum but didn't find a previous topic with a quick and simple method to remove items from the list .
Is there a method, other than billing them or sorting each issue individually, to permanently remove individual documents from the VF04 list?
Thanks in advance for any help.
David

Hi,
David,
Download a list of Pending delivers doc form VF04.
Paste the list in T.Code : VL09 (Delivery reversal) and reverse the delivery.
Then go to T.Code: VL06G Select the list of deliveries that has been reversed, select/delete all un- wanted deliveries.
This way you can remove all unwanted pending deliveries forn Billing due list (VF04).
Thanks & Regards,
R.Janakiraman

Data back up from Single User Mode

Hello,
I have a problem with my 700 MHz iBook, dual USB, with OS X 10.3.9.
Unfortunately the OS doesn't start up because of "overlapped extent allocation" problem...
I would like to re-install the complete OS but before doing it, I would like to back up some directories.
Is it possible to save some data, by connecting an Ipod or some sort of external peripheral, from the Single User mode?
If yes, how can I do it?
Thank you in advance from your kind support.

Before giving up the ghost check out these:
http://docs.info.apple.com/article.html?artnum=25770.
Manually fix Overlapped Extent Allocation Errors without Disk Warrior
Overlapped overlapped extent allocation errors can be the bane of any Mac user's existence. Often, these errors go unnoticed until the problem becomes visible: your Mac might refuse to boot, crash unexpected, or worse, critical data might disappear from the Finder. Disk Utility can detect, but not fix overlapped extent allocation errors, and certain third-party utilities, such as Alsoft Diskwarrior, can fix them, but generally without reporting the consequences.
Overlapped extent allocation error occur when the file system thinks that two files are occupying the same area on the hard disk, hence overlapping on the same "inode," which is the structure which holds the location of the data blocks the file occupies, and also file permissions and flags.
Clearing the "overlapped" or "overallocated" extent allocation essentially means that you'll have to lose some data, because the only way to remove the overlap is to delete the file that's occupying the inode. So, if you suspect, or find out, that the guilty file is a critical system file that resides in one of the hidden system directories such as /etc /var /usr/ or visible system directories such as /System or /Library, and you don't want to reinstall the whole OS (which might not fix the overlapped extent allocation anyway), it's good to have another disk available to copy the files back to your original disk if necessary: a second bootable hard drive or a firewire drive connected to your Mac when you remove the misbehaving file. Just make sure that when you copy the file back to your boot disk that the permissions are correct, so it's best to use the "ditto" command, so that all sticky bits, flags, and permissions are preserved.
In case you didn't know, you don't have to boot from an install CD in order to check for overlapped extent allocations. All you need to do is restart your Mac, while holding down command + S to boot in "single-user mode."
At the command prompt that appears, type:
$ fsck -fy
If you have an overlapped extent allocation, you'll see:
"Overlapped Extent Allocation" (File 123456d)
No matter how many times you run fsck -fy, you'll never be rid of the error.
So, simply issue the following command:
find / -inum 123456 -print
Note the "d" was dropped, or any extra letter that appears after the inode number.
The find will return a file name that matches with the inode number, and the path to that file. If you remove the file then the fsck will not return this error next time you run it.
However, before you can delete the file(s) in single-user mode, you'll need to mount the file system. Type:
$ mount -uw /
When done, issue the "sync" command, and that will flush the write cache so that all pending writes are written from memory to the disk. Also, since most OS X 10.3 Macs use the HFS+ Journaled file system, it might be a good idea to disable the journal before booting into single-user mode by typing:
$ sudo diskutil disableJournal /
then re-enable it when done fixing the overlapped extents and rebooting normally:
$ sudo diskutil enableJournal /
Chris Anderson is a long-time Linux propellerhead who just got his first Mac, an ibook G4, and can't keep his hands off of it. He currently works as a "The Architect" and general visionary for a maker of world-class collectibles.
If you own Disk Warrior then it should be able to repair a drive with overlapped extents.
There are two backup utilities included in Unix - psync and rsync. You will find them in the /usr/bin/ directory. For documentation simply enter: man psync or man rsync. In order to write data while in single-user mode you need to issue the command: /sbin/mount/ -uw / (Note: there is a "space" between the "uw" and the "/".) To mount an external drive you will need to provide the mountpoint for it in place of the "/", e.g., "/Volumes/volname") without the quotes.

What steps do I take to give my husband my older IPAD w/o removing him from my Apple account?

I recently bought a new IPAD2. All personal data and APPS were transferred from my older IPAD to my new one at the time of purchase. I'd like to give my older IPAD to my husband w/o removing him from my Apple acct. Apple's support does not provide instructions for my situation. Does anyone have suggestions as to what steps I should take?

What you might need to do depends upon how you want the old iPad to be for him.
If he will be using your iTunes account for any purchases/downloads from the store then he can continue to be logged in with your account in Settings > iTunes & App Stores. If not then log out of your account by tapping on your id in there, and he can then log in with his own account - any apps and other store downloads that you leave on the iPad will remain tied to your account, so only your account will potentially be able to redownload them and/or download updates to your apps.
To use his own account for Messages he can log out of your account via Settings > Messages > Send & Receive - tap on your id at the top of that screen and select 'sign out' on the popup. He can then log in with his account. Similarly for FaceTime : Settings > FaceTime (tap on your id on that screen). And (if he wants to back up his content to his own account) : Settings > iCloud > Sign Out
If you want to remove all content from the old iPad so that he can start afresh with it, then Settings > iCloud > Sign Out, and then Settings > General > Reset > Erase All Content & Settings

Hi I am having problems removing mail from trash folder. Can anyone help please

Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

Most efficient way to delete "removed" photos from hard disk?

Hello everyone! Glad to have this great community to come to for help. I searched for this question but came up with no hits. If it's already been discussed, I apologize and would love to be directed to the link.
My wife and I have been using LR for a long time. We're currently on version 4. Unfortunately, she's not as tech-savvy or meticulous as I am, and she has been unknowingly "Removing" photos from the LR catalogues when she really meant to delete them from the hard disk. That means we have hundreds of unwanted raw photo files floating around in our computer and no way to pick them out from the ones we want! As a very organized and space-conscious person, I can't stand the thought. So my question is, what is the most efficient way to permanently delete these unwanted photos from the hard disk
I did fine one suggestion that said to synchronize the parent folder with their respective catalogues, select all the photos in "Previous Import," and delete those, since they will be all of the photos that were previously removed from the catalogue.
This is a great suggestion, but it probably wouldn't work for all of my catalogues since my file structure is organized by date (the default setting for LR). So, two catalogues will share the same "parent folder" in the sense that they both have photos from May 2013, but if I synchronize May 2013 with one, then it will get all the duds PLUS the photos that belong in the other catalogue.
Does anyone have any suggestions? I know there's probably not an easy fix, and I'm willing to put in some time. I just want to know if there is a solution and make sure I'm working as efficiently as possible.
Thank you!
Kenneth

I have to agree with the comment about multiple catalogs referring to images that are mixed in together... and the added difficulty that may have brought here.
My suggestions (assuming you are prepared to combine the current catalogs into one)
in each catalog, put a distinctive keyword onto all the images so that you can later discriminate these images as to which particular catalog they were formerly in (just in case this is useful information later)
as John suggests, use File / "Import from Catalog" to bring all LR images together into one catalog.
then in order to separate out the image files that ARE imported to LR, from those which either never were / have been removed, I would duplicate just the imported ones, to an entirely separate and dedicated disk location. This may require the temporary use of an external drive, with enough space for everything.
to do this, highlight all the images in the whole catalog, then use File / "Export as Catalog" selecting the option "include negatives". Provide a filename and location for the catalog inside your chosen new saving location. All the image files that are imported to the catalog will be selectively copied into this same location alongside the new catalog. The same relative arrangement of subfolders will be created there, for them all to live inside, as is seen currently. But image files that do not feature in LR currently, will be left behind by this operation.
your new catalog is now functional, referring to the copied image files. Making sure you have a full backup first, you can start deleting image files from the original location, that you believe to be unwanted. You can do this safe in the knowledge that anything LR is actively relying on, has already been duplicated elsewhere. So you can be quite aggressive at this, only watching out for image files that are required for other purposes (than as master data for Lightroom) - e.g., the exported JPG files you may have made.
IMO it is a good idea to practice a full separation of image files used in your LR image library, from all other image files. This separation means you know where it is safe to manage images freely using the OS, vs where (what I think of as the LR-managed storage area) you need to bear LR's requirements constantly in mind. Better for discrete backup, too.
In due course, as required, the copied image files plus catalog can be moved bodily to another drive (for example, if they have been temporarily put on an external drive, and you want to store them on your main internal one again). This then just requires a single re-browsing of their parent folder's location, in order to correct LR's records inside this catalog, as to the image files' changed addresses.
If you don't want to combine the catalogs into one, a similar set of operations as above, can be carried out for each separate catalog you have now. This will create a separate folder structure in each case, containing just those duplicated image files. Once this has been done for all catalogs, you can start to clean up the present image files location. IMO this is very much the laborious and inflexible option, so far as future management of the total body of images is concerned... though there may still be some overriding reason for working that way.
RP

Remove Item from Item list through DTW

Hi Experts,
Please do the needful for the below issues.
1.System is not allow partial delivery but I already activate allow partial delivery at sales order logistic tab.
2.System is allow to print the document at client place automatically at the time of the creation of the sales quotation but not at server.
3.How to remove Item code from the DB with the help of the DTW.

hi,
If there is no transactions associated with item,
Open item in item master data,From menu bar,Select Data ---> Remove.
for other cases refer Note 1163367 - How can obsolete items be managed in SAP Business One?
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1163367]
Jeyakanthan

How to remove faces from url

Hi All,
Following is my web.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
    <description>Empty web.xml file for Web Application</description>
    <context-param>
        <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
        <param-value>client</param-value>
    </context-param>
    <context-param>
        <param-name>CpxFileName</param-name>
        <param-value>com.gemini.view.DataBindings</param-value>
    </context-param>
    <filter>
        <filter-name>adfBindings</filter-name>
        <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
    </filter>
    <filter>
        <filter-name>adfFaces</filter-name>
        <filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
    </filter>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>
    <servlet>
        <servlet-name>Faces Servlet</servlet-name>
        <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
        <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
        <servlet-name>resources</servlet-name>
        <servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
    </servlet>
    <servlet>
        <servlet-name>geminiservlet</servlet-name>
        <servlet-class>com.gemini.view.managed.geminiservlet</servlet-class>
    </servlet>
    <servlet>
        <servlet-name>gemini</servlet-name>
        <servlet-class>com.gemini.view.managed.gemini</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>Faces Servlet</servlet-name>
        <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/adf/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
        <servlet-name>geminiservlet</servlet-name>
        <url-pattern>/faces/geminiservlet</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
        <servlet-name>gemini</servlet-name>
        <url-pattern>/gemini</url-pattern>
    </servlet-mapping>
    <session-config>
        <session-timeout>35</session-timeout>
    </session-config>
    <mime-mapping>
        <extension>html</extension>
        <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
        <extension>txt</extension>
        <mime-type>text/plain</mime-type>
    </mime-mapping>
    <welcome-file-list>
        <welcome-file>/login.jsp</welcome-file>
    </welcome-file-list>
</web-app>I access the site using http://bri-dev2/Gemini/faces/login.jsp
I want to remove faces from the URL. like http://bri-dev2/Gemini/login.jsp
How can I achieve this ?
I used /* in the Faces Servlet URL Pattern. and when I accessed the page using
http://bri-dev2/Gemini/login.jsp it gave me FacesContext Exception. I am using FacesContext object in login.jsp and several other jsp pages. So /* did not work.
Any idea ?
thanks,
pp

Sorry, it took long time. bcoz after that, all the components of server were down. I had to restart the server.
Well, Following is the log:
07/08/09 18:12:35 Start process
07/08/09 18:13:04 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:05 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:05 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:05 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:05 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:06 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:06 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:06 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:06 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:06 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:07 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/09 18:13:14 Error initializing site OracleAS Java Web Site: No application named 'BC4J' found in the server
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
Aug 9, 2007 6:13:19 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
07/08/09 18:13:25 Tutalii: D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80\webappjdk14ver80\WEB-INF\lib\adf-faces-api.jar archive
07/08/09 18:13:25 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
07/08/10 08:21:29 Error initializing site OracleAS Java Web Site: No application named 'BC4J' found in the server
07/08/10 08:22:30 Notification ==> Application Deployer for webappjdk14ver80 STARTS [ 2007-08-10T08:22:30.864PDT ]
07/08/10 08:22:30 Notification ==> Do not undeploy previous deployment
07/08/10 08:22:30 Notification ==> Copy the archive to D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80.ear
07/08/10 08:22:30 Copy file C:\WINDOWS\TEMP\dir53654.tmp\webappjdk14ver80.ear to D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80.ear
07/08/10 08:22:31 Notification ==> Unpack webappjdk14ver80.ear begins...
07/08/10 08:22:31 Auto-unpacking D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80.ear... done.
07/08/10 08:22:31 Notification ==> Unpack webappjdk14ver80.ear ends...
07/08/10 08:22:31 Notification ==> Initialize webappjdk14ver80.ear begins...
07/08/10 08:22:31 Auto-unpacking D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80\webappjdk14ver80.war... done.
07/08/10 08:22:32 Copying default deployment descriptor from archive at D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80/META-INF/orion-application.xml
to deployment directory D:\Apps\OraHome_1\j2ee\home\application-deployments\webappjdk14ver80...
07/08/10 08:22:32 Notification ==> Initialize webappjdk14ver80.ear ends...
07/08/10 08:22:32 Notification ==> Initialize webappjdk14ver80 begins...
07/08/10 08:22:32 Notification ==> Initialize webappjdk14ver80 ends...
07/08/10 08:22:32 Error initializing data-source 'jdbc/GeminiSQLConnection1CoreDS': DriverManagerDataSource driver 'com.mysql.jdbc.Driver'
not found
07/08/10 08:22:32 Notification ==> Application Deployer for webappjdk14ver80 COMPLETES [ 2007-08-10T08:22:32.695PDT ]
07/08/10 08:22:32 Error initializing site OracleAS Java Web Site: No application named 'BC4J' found in the server
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
Aug 10, 2007 8:22:36 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
07/08/10 08:22:39 Tutalii: D:\Apps\OraHome_1\j2ee\home\applications\webappjdk14ver80\webappjdk14ver80\WEB-INF\lib\adf-faces-api.jar archive

Itunes was unable to load data class information from sync services.Reconnect and try again later.

when I open itunes I get message " itunes was unable to load data class information from sync services. reconnect or try again later "
I am unable to sync my ipad 2 or iphone 4 through itunes. I have tried all suggested options, removing itunes and related components from control panel + verified completely uninstalled from C program files + then reinstalling latest version of itunes (version 11.3.1.2). Also tried running itunes as administrator. Also tried reset sync history in itunes Also tried system restore on windows 7 from earlier period.Still get the same above message.
I run 64bit windows 7. Have recently renewed my Norton Intenet Security. Everything was OK up till then. Could this have anything to do with it.

A quick cursory browse seems to point that the problem is on Apples end since the last update of iTunes, theres loads of forum posts about it but Apple themselves arent responding as yet other then the usual "unplug, delete sync data, reconnect or completely uninstall iTunes" spiel which doesnt work so hopefully they will fix it sooner or later

Fiber date removed completley from BT Openreach af...

Similar Messages

Maybe you are looking for