Fibre upgrade for Exchange only lines (EANAR)

Who can advise me if there are any plans to upgrade Exchange only lines in my local Norfolk exchange (EANAR) to FTTC as I currently cannot get fibre despite my Exchange having been upgraded in Dec 2014? BT Openreach were near useless in just confirming that my existing landline was exchange only followed by rubbing salt in to the wound by announcing how BT Openreach has managed to get fibre to everyone else in the area (i.e. without an exchange only line)! The local exchange was upgraded as part of BB for Norfolk project.
Many Thanks.
Solved!
Go to Solution.

beebee1 wrote:
Hi,
You contacted Better Broadband for Norfolk. Do you or any one else on here know who I can contact for Hackney, London, please?
Hi beebee1,
Unless anyone else knows of a BDUK scheme for London, there is none listed here :-
For specific information on your particular area, please click on the ‘more info’ links in the table.
Area Contract signed Fibre broadband target (% of premises) Superfast broadband target (% of premises) Target date More information
Surrey
Sep 2012
99.7%
Not clearly specified
End 2014
More info
East Sussex
May 2013
99%
96% (at least 24 Mbps)
Beginning summer 2016
More info
Wiltshire and South Gloucestershire
Jan 2013
Not specified
91% (over 24 Mbps)
Mar 2016
More info
Cambridgeshire and Peterborough
Mar 2013
98%
90%+ (at least 24 Mbps)
End 2015
More info
West Sussex
May 2013
98%
Not specified
Spring 2016
More info
Merseyside
Oct 2013
98%
89%
Jul 2016
More info
Dorset
July 2013
97%
95% (at least 24 Mbps)
End 2016
More info
Staffordshire
May 2013
97%
95% (24 Mbps+)
Spring 2016
More info
Lancashire
Apr 2012
97%
Not clearly specified
End 2014
More info
West Yorkshire
Sep 2013
97%
Not specified
Autumn 2015
More info
Cheshire
Apr 2012
96%
Not specified
End 2016
More info
Wales
Jul 2012
96%
Not specified
End 2015
More info
Northumberland
Apr 2013
95%
91%
Jan 2016
More info
Kent
Mar 2013
95%
91% (25 Mbps+)
End 2015
More info
Derbyshire
Aug 2013
95%
Not specified
End 2016
More info
Leicestershire
Aug 2013
95%
Not specified
Mar 2016
More info
Nottinghamshire
Aug 2013
95%
Not specified
Mar 2016
More info
Cornwall
2010
95%
Not specified
End 2014
More info
Hampshire
Mar 2013
Not specified
At least 90%
End 2015
More info
County Durham
Apr 2013
94%
Not specified
End 2016
More info
Lincolnshire
Mar 2013
94%
At least 88%
Apr 2016
More info
Cumbria
Nov 2012
93%
Not clearly specified
End 2015
More info
Shropshire
Mar 2013
93%
Not clearly specified
End spring 2016
More info
Berkshire
Oct 2013
91%
Not defined
September 2015
More info
Warwickshire
Jun 2013
91%
Not specified
Spring 2016
More info
Milton Keynes and Central Bedfordshire
Aug 2013
91%
Not clearly specified (about 90%)
Spring 2016
More info
Worcestershire
Aug 2013
Not specified
90% (24Mbps+)
Spring 2014
More info
Oxfordshire
Aug 2013
Not specified
90% (24 Mbps+)
End 2015
More info
Northamptonshire
Mar 2013
91%
90% (more than 24 Mbps)
Sep 2015
More info
Hertfordshire and Buckinghamshire
Mar 2016
More than 90%
Not specified
March 2016
More info
Hereford and Gloucestershire
Dec 2012
90%
Not clearly specified
End 2016
More info
Rutland
May 2012
90%
Not specified
End 2013
More info
Suffolk
Dec 2012
Around 90%
Over 80% (at least 24 Mbps)
End 2015
More info
Devon and Somerset
Jan 2013
90%
Not specified
End 2016
More info
North Yorkshire
Jul 2012
90%
Not specified
End 2014
More info
Essex
Aug 2013
87%
Not specified
End summer 2016
More info
Norfolk
Dec 2012
Not specified
Over 80% (at least 24 Mbps)
Autumn 2015
More info
Best regards,
dfenceman

Similar Messages

Exchange only line really ?

I'm in the unfortunate position of living in an FTTC enabled area but live in a house that is apparently fed by an exchange only line. Whilst there is a green fttc cabinet and green PCP at the end of the road there are also some grey BT cabs at the other end. Now I've heard people say BT cabs are only green but these certainly are BT cabs as I've seen Openreach vans parked in front of them with their engineers working on them. There seems to be a pattern where I live, those with a grey cab can't get fttc, those with a green cab can. My questions however are these ?. Why were the green cabs equipped but not the grey and why would it be stated that I'm an exchange only line when I suspect I'm fed from the grey cab and not the green ? Are there any plans to enable the grey cabs ?

I put my address in as I'm with Sky at the moment and for some reason most checkers say I don't have a phone line but clearly I have. It just says I'm connected to exchange Hardingstone and I can get standard ADSL products up to 3.5 meg. No cab info or indication that I'm exchange only but the mods on here claimed I was E/O some time ago. Maybe it's a mistake in the database but I suspect I'm on a grey cab which somehow makes me e/o. I live approx 2 miles from the exchange so it would be pretty inefficient way of doing things. The grey cabs seem to coincide with newer build houses.

Nokia N8 Belle - Mail for exchange only allows man...

Hi. The problem is fully described in the title. I already was abroad in last July and when i came back it was all OK. On the contrary now I can't change synchronizing times -phone says "Only manual synchronization when in roaming" or something like so. (I am NOT in roaming now.)
Thank you for all your help.
Solved!
Go to Solution.

cavour1980 wrote:
Hi. The problem is fully described in the title. I already was abroad in last July and when i came back it was all OK. On the contrary now I can't change synchronizing times -phone says "Only manual synchronization when in roaming" or something like so. (I am NOT in roaming now.)
Thank you for all your help.
Is your network operator a virtual network operator or have you just ported to one?
What's the setting in Menu > Settings > Connectivity > Settings > Allow mobile data usage? Is it 'Home country/region'?

Infinity/Fibre on direct exchange lines

My local exchange is apparently due to recieve an infinity upgrade in 2014 thanks to a Welsh Government programme.
The only stumbling block I can see is that there are few, if any cabinets on the exchange (small, rural village). I doubt we'll be getting FTTP, but has BT/OR developed a method for using FTTC/VDSL on an exchange only line yet?

there have been reports on forum of cabinets being erected just outside the exchange but this is still in infancy
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to create a SHA256 SAN Certificate for Exchange

Dear.
When using the command as described below to create a SAN Certificate for Exchange, only SHA1 certificate requests are created. How can I create the same request but for SHA256?
It seems that it's not possible to do this through the New-exchangecertificate.
Do you know the alternative command when using certreq for the following Exchange command:
New-ExchangeCertificate -PrivateKeyExportable:$true -FriendlyName 'mail.domain.com' -SubjectName 'C=NL,S="aaaa",L="bbbb",O="cccc",OU="dddd",CN=mail.domain.com' -DomainName @('mail.domain.com','exchange.wps.domain.com','webmail.domain.com','ews.domain.com','as.domain.com','oa.domain.com','oab.domain.com','ps.wps.domain.com','autodiscover.domain.com')
-RequestFile '\\10.0.6.151\c$\temp\certificate_Request.req' -GenerateRequest:$true -KeySize '2048'
Thanks for the feedback.
Regards.
Peter
Peter Van Keymeulen, IT Infrastructure Solution Architect, www.edeconsulting.be

Hi Peter,
There is no parameter in New-ExchangeCertificate to select the Algorithm type (Secure Hash Algorithm (SHA)) to generate request. Personal opinion, we can create the certificate signing request using the Certificates MMC and then creating a custom request
as follows:
1. Open MMC.exe. Click File >
Add/Remove snap in…
2. In the Available snap-ins tab, select Certificates >
Add > Computer account > Local computer >
Finish.
3. Expand Certificates (Local Computer) > Personal > Certificates.
4. In Action pane, click More Actions > All Tasks > Advanced operations > Create custom request.
5. click Next > Proceed without enrollment policy > Next > Next.
6. In Certificate Information page, click Details > Properties.
7. Then you can fill in the needed information for your request.
8. In Private Key tab, expand Select Hash Algorithm, set the Hash Algorithm to
sha256.
9. Click OK > Next. Fill in File Name and select the request location.
10. Finish it and send this request to the certificate authority.
Regards,
Winnie Liang
TechNet Community Support

Upgrading from Exchange 2003 Bridgehead servers to Exchange 2010 Transport Hub servers for routing SMTP only

Our company moved from on-premises Exchange 2003 to Office365 and only have 4 Exchange 2003 servers on-prem that we use for Routing email from application servers to Office365. We need to migrate these servers to Exchange 2010 then to Exchange 2013 and
only route email only. Is it possible to upgrade to Exchange 2010 by installing the transport Hub & Mailbox server options only? Our OAB and EWS services come from the CAS servers located on Office365 so we should not need a CAS server to set up Transport
rules or route mail would we? Any assistance with this would be greatly appreciated! - Thanks, DWB
Dave

Since it is not internet facing we will not have to worry about configuring an Internet Domain Name when installing the first server, correct? in my planning I was going to
install the Exchange 2010 CAS/Mailbox/Transport Hub roles on one server, then upgrade it to Exchange 2013. Once this is completed I'll then install the 2 mailbox role servers in one Datacenter, and 3 more in our DRP DC. If something happens to the
primary Datacenter I would want it to fail over to the other site. For this I would have to install another CAS/mailbox server in the secondary DC. Would this plan sound about right? Since we moved to Office365 in 2010 I have not had a chance to deal with
actual servers except for the Exchange 2003 servers we still have on-premises. Each of these are located in 4 Regional offices along with single Windows 2008 R2 servers using only the IIS SMTP service for routing mail from on-prem application servers
and print/scanners which email back to the users. The plan is to move to a routing system which will provide both MTA and redundancy if one has an issue.
Dave

When is my BT cabinet being upgraded for fibre?

Hi,
I live on a new build estate with about 100+ houses and whilst everywhere around us seems to be able to get fibre our cabinet has not been upgraded for fibre.
I'v registered my interest on the BT site to be kept informed of fibre availability in my area several times and have not heard anything from BT.
I cannot find anywhere on the BT site / forums which tell me how I can find out when BT are / or if they are planning to upgrade my cabinet.
Can anyone help me find out more accurate information from BT about this as I work from home a lot and my current broadband speed is very slow and drops off a lot?
Thanks,
Matt

Hi mattr,
Your exchange maybe FTTC fibre broadband enabled but to be able to get Fibre broadband such as BT Infinity your green telephone street cabinet will also need to be upgraded with a new FTTC Street Cabinet. Not all of these street cabinets in an exchange area are upgraded.
You can check if WBC FTTC fibre broadband such as BT Infinity is available to your landline number/address by going to the BT Wholesale Database.
If it gives a estimated date for :WBC FTTC" then your cabinet is in the rollout plan.
If you do not have a BT recognisable number then you can check using your address by going to BT Wholesale Database http://dslchecker.bt.com/adsl/ADSLChecker.AddressOutput .
Click here to see an example of what your looking for in the BT Wholesale Database.
If there is no mention of WBC FTTC when checking the BT Wholesale Database then unfortunately it looks like your cabinet isn't currently in Openreach's fibre broadband rollout plan.
Unfortunately BT Retail (a communication provider/ISP who operates this forum) does not have much say as to when and if you will be able to get FTTC or FTTP/H based broadband such as BT Infinity.
**The Fibre-Optic Broadband Rollout is being managed and done by Openreach for all communication providers/ISPs.
BT Retail (a communication provider/ISP) has nothing to do with the rollout of fibre broadband.**
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Additional line item for Exchange rate gain / loss

HI,
We ahve three currency as Main currency (INR), group currency (INR) and Hard currency (USD).
When we pay to vendor or received from customer, system generate additional line item for Exchange rate gain / loss with Rs. Zero . But transaction is in INR. But it has value in USD as USD 0.01.
Please suggest.
Regards,
Harshal

Hi,
I got your point.
Its a standard behaviour as part of parerral valuation with addtional local currency.
Please make sure that the below are set in your system.
1) in OB22, for your company code, for the HARD CURRENCY--The source curr must be Translation taking first local currency as a basis
2) For every foriegn currency you use, you maintain the exch rates in OB08 with Foriegn Currency 2 Local Currency combination always. And at the same time make sure that there is no opposite combination rates for the same.
(Like 1 USD = 50 INR...1 GBP = 80 INR....1 EUR = 60 INR only)
These may avoid most of the cases where 0.00 LC value lines during clearing.
Regards
Srinu

An upgrade for my IPod 3rd gen and now all my APPS close as soon as they open, except for the first page and the bottom line.

I just downloaded the latest upgrade for my 3rd gen IPod and now most of the Apps close as soon as they open. Only the first page of Apps and the bottom line will operate. Does anyone know of a solution. I checked with common problems and I don't have other Apps open.

If the ipod was completely drained of power, you have to leave the ipod connected to a power source (Like your PC) for up to an hour before it will have enough power to power up and be seen by windows and iTunes.
http://docs.info.apple.com/article.html?artnum=61711

Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

You have 14 days from date of purchase. You need all the packaging plus your receipt.

Report at line item level but also for document total for once only

Dear all,
seek for your help for the following issue
There is a A/R invoice with 3 items
There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
Example, for AR invoice number 1234567:
Currently:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50                       100
1234567       Item-B             20          2       40                       100
Requested to be presented as:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50
1234567       Item-B             20          2       40
Thank you very much!!!

Hi,
Try This.....
select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
Thanks
Shafi
Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

I cannot get into my iPad. Asking for exchange account Id and password. I did not sign up for an exchange account. I have hotmail only as far as I know. Continues to say password incorrect and I know it is correct. I read blog abt this issue no help

I am unable to receive mail in my hotmail account. Message asks for exchange password... What kind of account is hotmail exchange? I read the community blog with the same prolEm previously and tried to correct it based on those notes without success! HELP PLEASE! Thanks in advance!

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

Have a macbook pro 15" late 2011 , with only 4gb of mem , i want tot upgrade for 8 witch one its better

have a macbook pro 15" late 2011 , with only 4gb of mem , i want tot upgrade for 8 witch one its better

Use Crucial.com or macsales.com. They specialize in Mac memory.

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

Fibre upgrade for Exchange only lines (EANAR)

Similar Messages

Maybe you are looking for