FICHERO 190

Buenas, al generar el fichero 190 del año 2013, el report, no nos esta separando por ejercicio las cantidades del rendimiento de años anteriores(2012, 2011, etc.), ni las retenciones.
¿Tiene esto que ver con la caracteristica EATRA o con las tablas V_T5EI6 y V_T5EI7?, o ¿es otro parametro?
Gracias por las respuestas.

Buenos días,
Parece que la nota si podría ser relevante para 4.6c, 4.7 y 5.0; por favor reportad un mensaje a la OSS para que lo analicemos. Gracias.
Saludos.

Similar Messages

Incorporación DIETAS al modelo 190 IRPF (España)

Hola Foro,
desde la base de datos QSTRE queremos generar un fichero en la que se muestren datos del modelo 190 con dietas.
Necesitaría saber qué programa hace este proceso o bien si existe alguna ampliación de algún programa para generar estos datos.
Saludos abaperos y gracias de antemano!

Buenas,
Posiblemente en la vista V_512W_D el concepto en el que pagas esté parametrizado en "Acumulaciones" tengas marcado un flag en la opción "BI percep. exentas" y es la razón por la que te apararece en el certificado de retenciones en dietas de gravamen y no en el campo de exento IRPF.
Un saludo

My iPhone 5S is using 2.5GBs of storage for the camera roll. I deleted all but 190 photos and this did not change. My other devices cannot backup to iCloud due to the volume on my iPhone. Any ideas?

My iPhone 5S is using 2.5GBs of storage for the camera roll. I deleted all but 190 photos and this did not change. My other devices cannot backup to iCloud due to the volume on my iPhone. Any ideas?

Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
Cheers,
GB

Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190

Hi everybody.
Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
I got nvidia geforce 6600 agp if it does matter.
So is there any particular issues that can arise after updating?
Thanks a lot!

Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?

Satellite L300-190 - wireless is not working in Ubuntu 8.10

Hi,
I have recently bought this machine Toshiba Satellite L300-190 (PSLB8E-014008N5).
First I tried to install Ubuntu 7.x but that did not work due to some graphic card issue. Then I try the new version Ubuntu 8.10 , everything is working fine, except of wireless. There is no wireless detection in it.
I tried through Ubuntu forum, but still no luck. Please help me out if u can provide me some proper driver or can guide me as well.
I am waiting for your response.
Ali

Fianally Wireless list have got by using the following driver and instructions for the the laptop Toshiba satellite L300-190...
http://wireless.kernel.org/en/users/Download
as I am using ubuntu 8.10 , so i installed compact driver supported for 2.6.27.
and just untar it...
1.make
2. sudo make install
3. sudo make unload
4. sudo make load.
and restart ur PC, and thats all, hopefully for the next start u can see the wireless connections

When I try to log on to Facebook, My iPad will not recognize my password, and I get an error code 190. What is it and why do I get it?

When I try to log onto Facebook, my iPad will not recognize my password, and I get an error code 190, but I can log on on my HP desktop. What is code 190, and why do I get it?

I was using the FB app that came with the iPad. What I eventually did was.
1. Held down both home key and on-off button until iPad shut down, then rebooted.
2. Uninstalled FB app.
3. Went to App Store and re-installed FB app.
The iPad had numerous problems. My son saw my plea on FB as I was accessing it through my HP computer, and he walked me through it. While he was at it, he taught me how to disconnect auto-correct. I am not certain that I want to keep that off, but everything is working the way it is supposed to the way it was in the beginning.
I am curious, though, as to what ears to the problem in the first place. After checking various sites, it seems that a code 190 has to do with windows not Apple.
But thank you for the response.

When I send mail, I keep getting this message. An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al

When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNS

Hi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans

How can I make a call to *190*phone number# in c#?

Hi,
I am trying to create an app as shortcut for some requests.
I want to make a call to this number: *190*phone number# using c# but it never works.
On the phone, I can call this number and I get a reply from my provider.
If I try to call it using:
Windows.ApplicationModel.Calls.PhoneCallManager.ShowPhoneCallUI("*190*phone number#", "TEST CALL");
I get a message saying that I have to use the dialer keypad to send the request.
Is there a workaround for this (bug)? I mean, if I put the phone number in the phoneCall-request, it is because I don't want insert it manually in the dialer keypad...
Thanks,
Adriano

Yes security LOL...
If Microsoft want security, they should create a smartphone without the possibility to install apps ;)
If an app can't make a call (user has to press CALL), the same thing is also possible for a FREE request to the provider, or not?
Thanks for the link! This show once again that write a utility for WP is a hard work...
If I create a new contact, I have to call phoneCallTask.Show();
... And so I am on the same situation.
.My phone provider created an app for iPhone and one for Android. I was thinking I would be able to create something for Windows Phone too. Now I know why nobody want to create tools for Windows Phone. The API never allow you to write a utility (for security
reason, I know ;) )... But it would also be nice to have a utility some times in a store full of inutility apps :(
About this BUG:
I can create a textbox where the user can copy the phone number (maybe the app could copy it automatically in the clipboard if there is no security problem about the OS :P). But the user has to exit the app, open the dialer and insert this text.
Is there a way to open the phone dialer?
Thank you for the support Cristian!

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891

An unexpected error occurred (4:190). Your firmware could not be updated, please try again.

hi
i get in my MacPro:
An unexpected error occurred (4:190). Your firmware could not be updated, please try again.
So which can i do ?
Im looking you to forward

What are you trying to apply ?
What Mac and what card are you trying to apply it to ?
What procedure are you following, and where do you get to when the error occurs ?

Powerbook 190 Series Transfer to PC

A co-worker of mine has a PowerBook 190 which he just needs files from. I have connected twop Macs using an etherner crossover cable but never a Mac and PC. What I want to do is connect them and get then recognized and just transfer the files from the PowerBook to the PC via ethernet crossover cable. He has not other expternal periphials so believe this is his only option. I have been searching around the Web but so far I have had no luck. Anyone can point me to some documentation to help? Thank you.
UPDATE: I just read something that this model does not even have an ethernet jack so you need a PC card with ethernet? Or use the serial port? What model?
UPDATE: I remember using an adapter that is sometimes called an EtherModem which is modem on one side to ethernet on the other.
-=SunnaH=-
12 iBook G4 1.33 Combo Airport Extreme Mac OS X (10.4.7) Dell 2004 ext. display and Lacie d2 eXtreme 250 gig.

SunnaH,
You have the more elegant option in hand. However, from the 'For What It Is Worth' standpoint of finding alternatives, Lap Link gives motherboard to motherboard solutions (at 157,000 baud in 1980s) for laptop data transfers.
"I have connected two Macs ... but never a Mac and PC. ...
- believe this (ethernet) is his only option. -
- use the serial port? What model? -
UPDATE: I remember using an adapter that is sometimes called an EtherModem which is modem on one side to ethernet on the other.
Comm Port to Comm Port has been available since about 1987 or 1988. I remember driving to Lap Link's home office in the shadows of Microsoft's new Redmond Headquarters and buying one of their MacLink cables the first week it was sold. One plug goes into the printer port of any legacy Mac from the SE on up and the other end plugs into the comm port of any PC.
Even then, port configuration on the Mac side was plug and play. The instructions stated that if there were any communications problems, they would be on Microsoft's side.
Lap Link should still be around - Googling brings up a number of seemingly current products, some of which are 'discontinued by vendor' and one
"Laplink PC To PC Communication Cable" at this site:
http://www.amazon.com/Curtis-PC075-08-Parallel-Laplink-Communication/dp/B00004Z5 IR/ref=sr111/002-5472956-4361654?ie=UTF8
which states: Date first available at Amazon.com: September 4, 1973.
I find the date to be highly suspect because neither Amazon nor PCs existed back then! Be that as it may, direct cabling does exist.
Jim

Help!!! Just imported 190 of RAW images to APerture 3 images

Help! I just imported 190 new images of RAW photos. There is this message that says This photo was adjusted using an earlier version on Apples RAW processing. The problem is the processing ruined my images. They are very dark with a greenish tint. The strange thing is that it did it to about 90% of my images. I was shooting in continous mode so I have several images which are very similar. One would been processed with the note this image... and the next one would be fine. How do I get my images back to normal. There is a reprocess buttom, but it does not seem to have any effect on the image. I just wont my image back to normal. How they are now they are terrible. I usually don't make huge adjustments to my images only minor changes. I would be grateful for any help. SInce these are images that are priceless. Family vacation pictures to National Parks that we probably wont visit again in our lifetime...

One more thing... When I look at my images in browser mode they look ok. It only when I open the single image that it changes.. For a few seconds it looks fine and then buff... it changes to a dark greensih tint...

Re: Equium P300-190 - Can I download an up-to-date sound driver

After my Equium P300-190 (Vista Home Premium) was invaded by a trojan horse and consequently cleared of some software,
I discover that I can't be heard when using Skype.
Can I download an up-to-date sound driver, as I can't find any other explanation for this....?
Grateful for any suggestions.
Have followed all instructions to check audio devices etc.

In my opinion after virus infection you should make clean OS installation to be sure that preinstalled OS is absolutely clean and free of some stuff that can have negative influence on hardware functionality.
Up-to-date sound driver doesnt exist. All you can find is sound driver you already have. This driver was included in original recovery image.
Is clean OS installation an option for you?

Setting up new imac on network using dhcp nut not getting a valid ip address. Same happens when I try to connect via wi-fi. IP address being assigned is 10.45.190.195

Have new Imac that I'm setting up. Company is using DHCP to manage IP addresses. Mac is plugged into netgear hub along with a PC. Mac is getting an invalid IP address of 10.45.190.195. PC is working fine. I've powered the hub on and off. I've renewed th DHCP lease on the Mac many times but IP address always comes back as 10.45.190.195. I've plugged the network cable directly in the network port bypassing the hub. Same result.
Having the same issue when trying to connect via Wi-Fi,
Anyone experiencing this issue?

I see what you are saying. When I lived in the dorms, I was set up in bridge mode because we had that type of modem. My question now is do I distribute a range of static IP's or share a public? Either of these settings give me errors where the starting and ending DHCP addresses conflict. I use 10.0.1.1 and 10.0.1.100 and this error no longer seems to persist, but then I am not able to connect to the internet and the amber light keeps flashing- along with my computer showing that I am still connected to the TM.
Thank you for your support so far.

Huion GT-190 not responding to Photoshop CS6

I recently purchaced a Huion GT-190 graphics tablet, with the anticipation that I could use Photoshop CS6 for drawing. Unfortunately, Photoshop is acting strangely when using the tablet.
When I try to use any tool or go into a new layer the program doesn't respond correctly. For example, if i wanted to add a new layer, I would click the new layer button, but the cursor would still be the hand with the pointing finger even when it wasnt hovering over the new layer button. The cursor would go back to normal when I clicked the mouse, but not the stylus to the screen. This problem happens with every tool. Photoshop acted normally when I used a mouse.
Another wierd thing that is happening is whenever I try to paint or draw in Photoshop, I can only draw one dot. That's it. After that, whenever i try to paint nothing appears on the screen. Once again, the program acts normally with a mouse, I can scribble freely.
The tablet works compleatly normal in Flash CS6 and Illustrater CS6, oddly enough.
I downloaded the most recent driver for this model from Huion's website and I just e-mailed them regarding this issue. I asked them if they possibly had a newer driver for this model.
I've been digging around the internet and no one else seemed to have this problem. If anyone can help me with this issue it would be greatly appreciated!! Thank you in advance!!

Contact the makers of your tablet and see if they have a driver update to correctly work with Photoshop.
Those knockoff tablets frequently have a lot of driver problems...

FICHERO 190

Similar Messages

Maybe you are looking for